The RC4wd Scottsdale TF2, Test Run, Easy Body Mounts, & More Scale RC

In part 3 of the new RC4wd K10 Scottsdale, I finish up the suspension changes, add some scale details, and make easy body mounts for it plus a little test run!
RC4wd.com for this truck and more of the most scale realistic RC parts available!
If you like shopping with Amain, please help support the channel and use the link below!
www.avantlink....
Check out my Amazon influencer store page for some of these products and help support the channel!
amzn.to/2NMKTtX

[@bcochener]

Beautiful! Looks much more proper sitting lower as well. I’m all about the clean looking builds, glad you are seeing the awesomeness of having no patina (sometimes) 😂😂😂. Great overview as usual! - only odd thing about the truck is the lack of window trim. Needs a bit of chrome…

[@redndeyes]

Just need to dial in the dumbo ear mirrors 😂

[@andrewrichey7374]

Just found RC4wd Polished 60 mm scale shocks super cool they are on the way, From Amazon

[@williamwade8929]

Hey man the new rc4wd trailfinder2 K10 Chevy truck it's is a awesome looking new look

[@brianwood9849]

Nice video brother and your truck looks GREAT! Are you going to put the RC4WD 350 in or scale motor? I’m going to buy one myself and put the Rc4wd 350 in it with Chris’s Rouge Element valve covers on it that Rc4wd sells! And I’m more like you and receive more Joy out of it from the modeling side rather than driving them. I love the scale realism and wrenching on them more than anything. I really don’t drive them to much!

[@WoolstyRC]

A cheaper option to the hw1080 is a isdt 70 it's very programmable and no program card it's bluetooth 👊🏼🤙🏼🇬🇧💨💨

[@DadBeard-pi2oy]

Perfect!! look just like my 78 I had in High School in 80's!! I only wish I could get the tire and wheel combo look of 33x 12.50 x 15 on a 10" wide wheel

[@brandaneakright6082]

The grill that comes with it is a 73-74 grill, and the optional grill is a 77-79 grill. I’m definitely picking one up, but it’s looking really good. I’d do the interior up some more, and maybe some wheels and tires.

[@macharleys72]

Installed grill is 73-74, the optional grill is closest to a 75-76 model, but not as many vertical bars….Either way, I want one of these trucks! 😫

[@mikeupton5406]

Shiney blue truck in R/C Everyday scale shop. Bob squinting and searching for his Ray-Bans ...

[@redman4277]

Ok I think I have to buy this kit lol. You have it lowered and looking sweet 👍. Hope you get some dirt on it next year at Beat the Creek 24 lol

[@TCnML01]

The Proline class 1 super swampers would look great on this truck. Especially with the 1.55 wheels

[@paulmcnamara2908]

Wow in love with shiny, Im still in shock! One of my fave trail trucks is my old SCX10 with a shiny black Gmade Buffalo body set sat on top! All murdered out except for one red strip down the sides just love the look!

[@andrewrichey7374]

Looking good love the front grill, appreciate you sharing I’m just stoked working on my rat Rod. I’ll catch you on the next one until then peace and chicken grease 😁👍👍😎

[@kevinbreaker2683]

I think 1979

[@slowriderrc4790]

Nice! Great with the rub-screws trick, got to try on my trucks! Totally forgot that soulution! Any link to the one you use?

[@RCeveryday]

amzn.to/3DW6edu

[@jonlaird5082]

The grub screw trick is a good solution, but what I do is use a driveshaft pin. You can still thread it in, but it will be smooth and won't screw up the body holes over time, unlike the grub screws. It's more work doing it, but well worth the effort in my opinion

[@Trail_Blazin_RC]

It’s looking awesome brother!!

[@beechmountainrc1668]

Shiny science?!?! Don't scratch that paint lol

[@brandongo927]

Needs hubs too! Can't have a locknut amongst all the goods

[@ryancampbell6657]

The grill you put in is a 1978, I think

[@paulworsaa8739]

Ok,,, shop Bob wants the keys to the new truck... He's on a mission to find a female pug for his dog... And he's heard that the hobby lobby has some scale honeys in the model and die cast isle.... He also heard that they have a scale barber shop... In the doll house isle. He wants one of those retro Viking hair cuts... it's time for a new doo.

[@RCeveryday]

😂😂 that poor dog does need some love. Bob gets plenty with his fro though🤣

[@longtalltexanrc3358]

That truck is really great right out of the box and the updates have it looking great!

[@christopherburton1842]

I would like to see red cat 26 inch wheels

[@DoubleADay]

Can't wait to get this truck. Looking forward to my first Scale Hardbody

[@bcochener]

You will love it Aaron! The bodies of the RC4WD are just awesome. A whole different level of scale realism. …I’m loving those classic stock wheels it comes with too!

[@stefan-norge]

Looks very nice. Great content 👍🏻

[@busman2050]

Awfull loud music !

[@jonlaird5082]

I love this truck and trying to talk the wife into letting me get this,lol. It took a little while to get the green light on an scx6 honcho 😂😂

[@brianwood9849]

That’s why I don’t have a wife RC first

[@KearSki]

I'm glad to see RC4WD still refuses to give the TF2 a better Transfer case skid, that stock skid is bad on the shorter wheelbase trucks, it's the worst on the LWB.

[@RCeveryday]

There are so many good aftermarket ones out though. A&M is my favorite. Bowhouse is second.

[@KearSki]

@@RCeveryday I've seen the A&M around, I've personally got a Bowhouse on my Hilux and it does great. But this truck looks good, especially with how you've lowered it. I think it needs some sidesteps/things that instantly get caught on rocks And an exhaust tip

[@sammygonzalez7627]

Really liking the grill, is that stock motor...is this the stock motor ?

[@RCeveryday]

It’s the motor it comes with stock. Yes.

[@farvacarramrod3672]

What would you recommend if you wanted to change the color

[@RCeveryday]

I’d just wait for the body sets to come out and build one from the ground up. I’m planning on doing a different one for this chassis.

[@kevinbreaker2683]

Nice ❤👍👏🛻🛻

[@andrewrichey7374]

Awesome just home from work watching now, also had some mail when I got home got my Hind joints front end is connected , Hi did you use spacers to spread it out a little, now I just need the shocks

[@blastarrow5938]

I'm not a Squarebody expert but I think the installed grille is a 75-76 and the optional grille is a 77-78

[@Rcworldshop]

So you get 60mm in front and rear shocks ?

[@RCeveryday]

Yes front and rear

[@rcjono]

Looks much cooler and drives more scale now 👌👌👌

[@connercurzio3645]

For optimal scale, I would only stick the Florida plate on the rear bumper. Florida only has 1 plate, as front plates arent a thing here.

[@chucksrchabit.7671]

Did that same kind of thing on the body mounts of my bronco. Looking forward to getting mine. First thing I’m doing is removing the chrome.

[@donaldhenke2750]

iam looking for a 1968 ford truck like that. can you help? please?

[@RCeveryday]

No one makes a hard bodied ford, traxxas has some lexan ford bodied crawlers

[@BusyBeesGrading]

Find someone to 3d print one. I'm have a 66 f100 done.

[@CLAUDIOSRC9529]

[@kevinbreaker2683]

That custom grill, Looks way better than the stocker👍 ,,,,,

[@nikolasburton3025]

I use driveshaft pins, screw that in thread end first, then they dont saw the holes out when removing refitting the body 👍🏻

[@brianargo1659]

Super cool as always. But i do think that other grill looks way more scale. When u picked it up i was hoping u was about to install it😂

[@ClassicSteelRC]

Sweeeeeeet looking rig! I think Woody would be a perfect driver! 🤔

[@The_RC_Guru]

I’m waiting for the body to be on sale on the rc4wd site. Love the new hardbody here.

[@brianwood9849]

Are they selling just the body?

[@The_RC_Guru]

@@brianwood9849 they will be I’m sure. They sell all the blazer bodies as loaded sets un the the bodies section on the site.

[@ekpauly]

I actually really like this kit, i will wait for the body set to come out though. But the bumpers,mirrors, and wheels are the wrong scale IMO, they are too big. Keep the awesome content coming.

[@RCeveryday]

It’s been the same on their k5 blazer body too. A lot of folks are swapping on the traxxas square body mirrors, bumpers and door handles.

[@brianwood9849]

You left out front shackles and hangers

[@Garcias_rt]

You said it hot here in texas 🤔, what part of texas you from , im from texas as well 👀 and i think i seen you on instagram

[@RCeveryday]

Im east of DFW

[@Garcias_rt]

@@RCeveryday man lol , im in Houston tx , i was hoping you said h town lol

[@Garcias_rt]

@@RCeveryday i just now stared following you on instagram

[@HobbyPerfeXion]

Truck looks great. One thing though...FL is a one-plate state. Only in the rear. Need a vanity plate for the front 😎 .

[@RCeveryday]

Right on lol. I’m from tx we have to do 2🤦‍♂️ I hate it

[@HobbyPerfeXion]

@RCeveryday we had to do 2 plates in MA too when I lived there so I hear ya.

[@justinvess9667]

Them tires look really good. If it had some weld wheels it would be perfect lol

[@jordanmohn1159]

Got that true potential shining through now! I knew you would lol. Congrats looks great 👍

[@R.Sole88109]

You're nailing to look of your Squarebody I'm calling "Blue Moon" cos it's once in a blue moon you like a shiny vehicle😜😄

[@RCeveryday]

Hahahahaha! Very fitting!

[@leec440]

That truck looks incredible. I gotta get one

[@ryand4786]

Stance is on point , truck looks awesome. Paint the letters on the tires , gives it a great look in my opinion 👍

[@redndeyes]

On point? The dumbo ear mirrors too? Huge oversight

[@ryand4786]

@@redndeyes LOL

[@andrewrichey7374]

Yeah that’s the multi bags I bought also

[@NoodlesNJ1]

Is this Lipo compatible?

[@RCeveryday]

Yes sir, just have to move the pin on the ESC to put it in lipo mode. I run 2000 3 cell in everything

[@NoodlesNJ1]

@@RCeveryday Awesome Thank You!