Finally bought rapidfire yesterday, it'll be replacing my true d. Bought it when watching your video about RDQ suing FAA, bought it from them as a means of support.
@XZLR8N5 жыл бұрын
I don't own rapid fire, but I'll still watch
@maxiemusfpv1985 жыл бұрын
XZLR8N me too lol
@echaitea5 жыл бұрын
i don't even own a module :(
@dznexe9725 жыл бұрын
for the future of course! 😂
@zachlindley91605 жыл бұрын
I use true d works just fine. I only have issues indoors, in that case i use my clearview groundstation. From my experience the rapidfire doest come close to groundstation. However i would have prolly bought the rapidfire instead of true d if it had been out already. Im not going to waste the money now.
@flo-ridafpv57135 жыл бұрын
Mee too
@mohammedmiah46785 жыл бұрын
I don't own one but it's always good to watch your videos. Always learning something new. Keep up the good work
@paulgiusti67795 жыл бұрын
Upgrade worked like a charm and as bonus I made a simple splash screen in Microsoft Paint. Now I see Swampdog FPV when I power up goggles. Sigh, I am such a geek to get excited by a little thing like that....
@Cre8ionz.3 жыл бұрын
2 Years late.. finally got RapidFire - thx for the informational vid !! :)
@Limanster4 жыл бұрын
my hdo 2 and my first RapidFire will coming tomorrow. I’m so happy Like a children now. XDDD
@overdosed513 жыл бұрын
Did your module come updated? I just ordered one and im curious if I'll have to go through this process
@Toddsnightmare2 жыл бұрын
Just got my orqas and my first rapidfire lol
@jonathankrum30164 жыл бұрын
At 4:14 is where the updating info starts.
@scottmarshall67665 жыл бұрын
Just ordered a set of HDOs (upgrading from Commanders, which I still love) from GetFPV, got the Combo deal, when it gets here, I'll be upgrading the firmware as per JB!. I also own a Clearview Receiver (NOT module) and will be comparing. We'll see how it stacks up. It will be a lot more convenient to use the RapidfFire module, so my hopes are high! Thanks for the useful video, I'll be using in when my new toys arrive....
@djilly753 жыл бұрын
So simple. I don't know why i didn't do it before. Thanks Josh
@MikeMcChiken4 жыл бұрын
Thanks for the video . Waiting for shipment to arrive right now for Rapid Fire and HDO2 . Even though im an old fart im having a hard time waiting , lol . Hope to see you at an event someday to thank you in person for all you do
@sodakmadaki77945 жыл бұрын
RapidFire changed my life.
@1juswnahvfn5 жыл бұрын
Just Bought One Today ! Still Learning...
@wrcrooke5 жыл бұрын
Bought the HDO+RapidFire in March, came with 1.0.9, just upgraded to 1.2.9 and full menu is in osd now
@PaneInTheGlass5 жыл бұрын
I just got one a few weeks ago & I love it so far.
@csamaniego5 жыл бұрын
Joshua, happy new year!!! Thanks to you, my learning curve has been very short. Thanks for all your videos!!!
@sethjacob7973 жыл бұрын
I know Im asking randomly but does anybody know of a method to log back into an instagram account? I was stupid lost the account password. I appreciate any tricks you can give me!
@allanjeremias60603 жыл бұрын
@Seth Jacob instablaster :)
@philthayer40875 жыл бұрын
True.....they blew CV right out of the water. Lots of red modules.....no CV units. I wasn't happy with my 1st batch until sending it back for the mod. Now I love it!
@JerryCalverley5 жыл бұрын
I always learn something with you. Even if I don't own it, I want to learn about.
@jymferrier5 жыл бұрын
This made me ridiculously happy.
@dis3nchant3d425 жыл бұрын
Perfect timing. Mines coming in the mail today
@adamjuszczyk19805 жыл бұрын
Jousha...don't you need do a recalibrate of the module?
@edudiy94383 жыл бұрын
@Joshua Bardwell - Are there still updates they are on Rapidfire? When Rapidfire. When was UPDATE 1.32 done?
@tylerwilliams7864 жыл бұрын
the box thats next to flash firmware that shows the versions you can select is not there. There is no box to select firmware version. Would you know why or any help would be appreciated. Thank you for what you do for this hobby. Love ur videos.
@Spdracer955 жыл бұрын
Guess I have to wait to update mine.... Site crashed... lol.. fpv junkies.. Awesome tutorials. Thanks man.
@Charlie_Waffles5 жыл бұрын
i bought one this week :D for my HD3 ^^
@SimeonSolarsky5 жыл бұрын
No Rapid here xD but I still watch!
@kingjames18615 жыл бұрын
Joshua in your video you mention "Blackouts". What do you mean by blackout? I am troubleshooting something strange that happened to me during a mountain dive where my screen went black. Im not sure if it is my camera or RF module.
@kwhite6215 жыл бұрын
"... except for Clearview...but uuuuuuuhhhh" Hahaha! It's funny because it's sad. I choose to laugh so I don't have to cry. There was a time when I was set on the Clearview. I was on the verge of pre-ordering but uuuuuuuhhhh...Ya. Now I have RapidFire module and I am happy. Thanks JB! Now I just have to decide what I should put in my splash screen
@philthayer40875 жыл бұрын
big boobs
@TheBeastFPV4 жыл бұрын
I can’t update my firmware and bought two of them can’t get any help
@Federico_F.5 жыл бұрын
Great job JB,witch mode is better for long range? Legacy? Thx
@rabunfpv4 жыл бұрын
Please help me Josh... How to play recording use dominator v3 with rapidfire module
@sushia.f.18095 жыл бұрын
Fatshark DVR Upgrade... Good or bad? Loving the content JB. Keep it up!
@Ashley-Norman5 жыл бұрын
Good! Works perfectly and easy to do. Examples on my channel if you are interested to see the results
@CoodexGamingForever5 жыл бұрын
The audio options i believe are only a beta firmware version option BTW, no active in current stable release firmware version
@dm0neycuh5 жыл бұрын
Is the rolling black image due to a DVR needs upgrade? I think immersion also released a Dvr update for this as well. Awesomeness
@MBorga Жыл бұрын
Hi Joshua i want to update my rapidfire Modul. Some things changed on the immersion Website.... what Software do i have to use? I can not see the Rapidfire updater.... under Latest Software Utilities what do i have to download? Best regards from Germany
@snowballfpv75835 жыл бұрын
Do you know when the new batch will be out ? Everyone has sold out in the UK
@notlewislevine5 жыл бұрын
Running 1.2.4 and still need to reboot my goggles to sync with a VTX if the goggles were on before the VTX.
@richardrhoads90885 жыл бұрын
I can only compare to cheap box goggles, but I love my set up. Hdo's with rapidfire. I figured if I was going to spend $ I might as well get the best 😁
@theroc4953 жыл бұрын
Joshua...I totally lose you on the bootloader part, I dont understand from that point on...im stuck right there after downloading bootloader, nothing happens, I still can't connect to module
@alldayair44215 жыл бұрын
Hey so I've been searching an answer to this question and haven't found one yet, are any antennas better than the TBS Triumph for long range (disregarding weight)? I've been using cheap eachine goggles (ev800) with a triumph for the last 2 years (and on tx: unify pro and a tramp) and have had great reception at 1.5km+ There must be something better now? Again disregarding weight. Thanks Joshua, your guides are the best! Finally setup gps rescue with your video, cant wait! Have some huge lakes I'm going to love ripping! Happy flying!
@JoshuaBardwell5 жыл бұрын
A properly made Pagoda is one of the best omnis for reception. Its main weakness is durability and it's very sensitive to being manufactured even slightly correctly.
@alldayair44215 жыл бұрын
@@JoshuaBardwell excellent thank you!
@jordan1991r5 жыл бұрын
Would have been nice to include the DVR update too. I know Tony is working on it still but process is pretty universal across dvr updates
@JoshuaBardwell5 жыл бұрын
It'll be in its own video
@jordan1991r5 жыл бұрын
Joshua Bardwell awesome! I’m sure a lot of people will benefit from it. Hopefully not a lot of bricking..
@MCsCreations5 жыл бұрын
Really nice, JB. 😊 But you still owe us a more complete comparison with the EV200D. 😊
@JoshuaBardwell5 жыл бұрын
In the blind test they really weren't even close.
@MCsCreations5 жыл бұрын
@@JoshuaBardwell I know, but I meant comparing to the other modules.
@maxiemusfpv1985 жыл бұрын
MC's Creations ohhhhh! Lol
@curtisnstacey5 жыл бұрын
what would it take to get you to put a rx5808 loaded with achillies firmware on it and do a side by side with the rapid fire. i dont think folks know about those modules.
@JoshuaBardwell5 жыл бұрын
I already did that in my latest round of module testing. Rapidfire win.
@MT-Vintage3 жыл бұрын
Hi ! I tried to connect them to PC, they give an error when updating fails. Do you have a way to update the FW for them? Thanks
@MrDaxrowden5 жыл бұрын
Can you please clarify what you think about the clearview? both module and ground station. I just want the best. I can save if I need to.
@highlyfefpv70635 жыл бұрын
they update often. I bought mine when bardwell did his review... I love the new firmware
@awya14755 жыл бұрын
thanks for this video. it was very helpful
@KayFPV5 жыл бұрын
Thanks for your tutorial 🙃
@HeathNielsen5 жыл бұрын
Can you ask about the mobula 7 update? Did you see that happy model is coming out with an HD version of the Mobula. I hope rapidfire works better with this one.
@niklasneuhold86065 жыл бұрын
Bardwell, I need your advice. So today I wanted to fly my drone just like every other day, but as I plugged in the battery and gave the drone to my friend to get ready to fly an ESC suddenly started smoking. After I unplugged it, I saw that two motor leads where shorted (due to my poor soldering skills...(the joit came loose)). Back at home, I resolder the motor leads correctly to the ESC and plugg in the battery, nothing, I go into my Betaflight to try if the motor will turn and surely it did. My question now is if you had a simmilar expierience and if so how it turned out, cause I wont be happy if my kwad suddenly drops out of the sky. LG Niklas ~Austria
@deathrollfpv5 жыл бұрын
Get a new esc dont trust that shit
@JoshuaBardwell5 жыл бұрын
I probably wouldn't trust it. Once the smoke comes out, it's dead to me.
@Michael-lx7px5 жыл бұрын
Hey Joshua, Happy New Year! Where can you get the white cover? I've been looking since Drib showed that he put one on his goggles.
@funKdatFPV5 жыл бұрын
GetFPV
@Michael-lx7px5 жыл бұрын
Thanks @@funKdatFPV
@Michael-lx7px5 жыл бұрын
@@funKdatFPV Out of stock at GetFPV
@Jack__________5 жыл бұрын
Are there any college courses or a college discipline that would help most with building drones?
@Kimentor.5 жыл бұрын
For us using the ribbon cable on older goggles (HD2), reckon you can do this without fully removing the module from the goggles? That ribbon cable was a bit of a pain to install... Typing this from work so I'm not sure the micro-USB is even reachable while they're in the module bay.
@CyrilJaquier5 жыл бұрын
I update my RF with the ribbon cable and without removing the module from the bay (just the cover). No problem.
@hakaiyou45325 жыл бұрын
omg i LOVE this module! it's so epic!
@azfpv37695 жыл бұрын
I don’t own one either but I hope some day I will, so I will watch this as well :).
@MrSirbiss4 жыл бұрын
After updating it you must calibrate it?
@jackdaniels79135 жыл бұрын
Still running the original laforge 😅 but I'm sticking around to see what new...
@jonathankrum30164 жыл бұрын
I Like the info about updating but the beginning was a bit long winded. can you put a bookmark right to the nitty gritty of updating in the future?
@JoshuaBardwell4 жыл бұрын
You can leave a comment with the timestamp in it if you would like to help others in the future.
@jonathankrum30164 жыл бұрын
Joshua Bardwell nice I didn’t think about that! I will do it!
@Dzejwor_Gromowladny5 жыл бұрын
I don't have one but it is my highest point on my actual shopping list. But there is a one liitle troublke with this ... only getfpv have them on stock ... and they have horribly expensive shipping cost to me ;(
@GnarlyGarnt5 жыл бұрын
Did you post the link to your review and outcome sheet of the RapidFire?
@JoshuaBardwell5 жыл бұрын
www.fpvknowitall.com/best-fat-shark-fpv-receiver/
@rtcfpv10125 жыл бұрын
Thanks for the update. So legacy mode would be like using the Furious trued?
@JoshuaBardwell5 жыл бұрын
Yes, or any other traditional diversity receiver. However rapidfire sensitivity is much better and you should still get superior results.
@rtcfpv10125 жыл бұрын
@@JoshuaBardwell Thank you. 👌👍
@i.v.28245 жыл бұрын
I find it hard to believe it's just coincidence, but every since I upgraded my firmware, I've had issues. A lot of the time when I turn my Goggles on, I'll get a black screen. I'm on the correct band and channel and it may be my dominator v3's, and I've always been able to play with it and get my video image, but it's really annoying. Not sure what the issue is. I don't have low power, I'm on correct vtx setting, never had issue before update?????
@tylermoats9502 жыл бұрын
Do I have to update the sd card firmware on rapid fire on hdo2 ??
@martinverbaas5 жыл бұрын
I wonder what would happen if you put 2 in a ev200d
@krishansen91365 жыл бұрын
My module shows it is working when I plug it into my HDOs after the update but my goggle screens are black. A red screen apears for a split second after I plug in the battery and then it is black. WTF happened
@JoshuaBardwell5 жыл бұрын
You are in hdmi input mode. Press the left side button on top of the goggles.
@scruffmgruff33345 жыл бұрын
the only real bad problem ive had is with the hlgrc hornet tearing between color and black and white. its un flyable this from the rapidfire?
@JoshuaBardwell5 жыл бұрын
Try changing to legacy mode.
@rollinondubz20024 жыл бұрын
I have the drivers installed from rapidfire updater. The newest updater installed.. the updater never gets a com port with plugging in module with joystick depressed. Tried 5 diff cables no difference. I can hear it chiming that a usb device is plugged in and unplugged when i unplug module
@JoshuaBardwell4 жыл бұрын
Most likely cause is driver not installed correctly. Uninstall / reinstall driver?
@rollinondubz20024 жыл бұрын
@@JoshuaBardwell got it thanks. Uninstalled drivers and re did them again and computer assigned a com port now. All updated
@flo-ridafpv57135 жыл бұрын
I now own a rapidfire....so I'm back :)
@MrJT270567 Жыл бұрын
hi Joshua, it's been a while since this video was posted. now there is a firmware issue from my point of view. after upgrading my module to fw 1.3.2 I cannot calibrate both modules to 100% rssi. the upper module gets 100% rssi but the lower module can't get any higher than 80% rssi. that's really frustrating after 50+ times calibrating... do you cam across that issue? or do you have an idea how to downgrade to fw 1.2.9? IRC removed all older firmwares from the updater program so I stuck with 1.3.2 and this issue now... even the 1.3.3 beta does not help. as you are some sort of "FPV guru" I thought asking you could be some option... thanks in advance & always happy flying. greetings from germany
@JoshuaBardwell Жыл бұрын
The calibration just measures the noise floor of each receiver in order to make the diversity algorithm more effective. I don't think that it affects the measured RSSI. If you swap the antennas, does the low-RSSI antenna change? Maybe you have a bad antenna?
@MrJT270567 Жыл бұрын
@@JoshuaBardwell No, the rssi stays at 80% no matter what antenna I use. i would like to downgrade to 1.2.9. everything was fine before the update to 1.3.2. really upset with the most expensive analog module which is claimed to be the best analog module on the Market. why they cut the firmware history... really upset...
@Cruis3zFPV5 жыл бұрын
🍺Cheers, Thanks JB!
@alexanderpalijjr4 жыл бұрын
Is Josh not the best tutorial videos on KZbin. There are so many shaddy videos out there it drives me nuts when you want to learn how to set things up.
@sensei_dfpv5 жыл бұрын
Hmm, I just got a mobula7... First batch rapidfire module, never upgraded the software... absolutely no problems at all. Should I still upgrade the firmware??
@JoshuaBardwell5 жыл бұрын
Yes.
@iphone_productions91435 жыл бұрын
I just bought rapid-fire for my Dom v3 and the image looks horrible , the sky looks green everything is bright , its the module because my true d looks perfect when I swap them have ya ever had that issue ?
@JoshuaBardwell5 жыл бұрын
Update to the latest firmware and if that doesn't fix it then ask ImmersionRC for help using the "ImmersionRC Hub" Facebook group.
@AlexanderSlash5 жыл бұрын
thank you! :-)
@M0rdH0rst5 жыл бұрын
The only time I had this rolling black screens was when I recorded on the DVR to show, that I don't have it 🤪 However, it seems to be fixed now, also on the Mobula7. I've installed the 1.2.2, it does not have the Audio-option yet.
@Autocharge15 жыл бұрын
One thing, if you upgrade do you have to calibrate?
@JoshuaBardwell5 жыл бұрын
It's a good idea to calibrate again in my opinion. ImmersionRC started remembering the calibration values in some firmware but I don't remember the exact version.
@johhny3035 жыл бұрын
i have a module but have given up trying to get a picture that's not overexposed/blown out...
@JoshuaBardwell5 жыл бұрын
This is a dumb question but have you tried changing the brightness/contrast setting on your goggles? Many people don't realize this is possible. It's the left hand joystick up/down for bright and left/right for contrast.
@johhny3035 жыл бұрын
yes i have but didn't make much difference, have also tried messing with the camera settings which made a little difference but there seems too be a problem.
@DorfyBoi4 жыл бұрын
The Rapidfire website isn't showing the drivers/firmware when I click on that section. Tried on 3 different browsers :(
@deepron48334 жыл бұрын
same here... any solution ?
@DorfyBoi4 жыл бұрын
@@deepron4833 Yes! Hover over the area where the drivers should be. They're just invisible for some reason, but they are there! You should see the link appear in the bottom bar of your browser when you hover over those spots.
@deepron48334 жыл бұрын
Immersionrc.com/?download=5931
@deepron48334 жыл бұрын
I dont have that area just tabs... anyway found links in page source
@filiped72985 жыл бұрын
I'm on 1.1.3 and I don't have any issues. Maybe I'll update. Band scanner and model finder can be useful. Does someone know if I'll lose my saved favorites if I update the firmware? I'll probably do, right?
@rline885 жыл бұрын
i lose all my favorites, yes :(
@RcReviewsLt5 жыл бұрын
some issues? :D all buyers are beta testers :D and now we need to upgrade and FatSharks, just for one module flaws and futuristics knowhows =)
@deathrollfpv5 жыл бұрын
Lol buddy every product u purchase in this hobby ur a tester
@TheBeastFPV4 жыл бұрын
When you just installed the updater I see the number at the top I don’t get them when I download it
@JoshuaBardwell4 жыл бұрын
You need to install the drivers before you can see the COM port. There is a link to the driver in the application window.
@TheBeastFPV4 жыл бұрын
Joshua Bardwell I did but guess it not working
@TheBeastFPV4 жыл бұрын
Joshua Bardwell please watch my video
@djilly754 жыл бұрын
thanks
@propsoff5 жыл бұрын
Thanks Bardwell... Your swell
@stickboyfpv47424 жыл бұрын
Can anyone tell me the difference between the modes? Like mode one is the fuse the 2 antennas together and legacy is legacy like any other diversity. Whats mode 2?! Why didnt they just delete mode one and call mode 2 the new mode 1 or what am I missing? Thanks!
@JoshuaBardwell4 жыл бұрын
Mode 1 is sync reconstruction and frame combining. Mode 2 is only frame recombining.
@jandomingo98065 жыл бұрын
I have all my cams set to pal.. when i fly mode 1 its dark but flyable on bright days... mode 2 is perfect. If i change my cams to ntsc.. will mode 1 be better? Seems mode 1 has less break up then mode 2. So pal or ntsc make a difference?
@JoshuaBardwell5 жыл бұрын
Make sure you are on the latest firmware first.
@jandomingo98065 жыл бұрын
@@JoshuaBardwell 1.2.9. I am
@bpwarrior15 жыл бұрын
What about problem with Mobula? Is it solved?
@JoshuaBardwell5 жыл бұрын
Which problem? You mean this one? kzbin.info/www/bejne/l5TPoX1_m8-Ih7c
@redheadpiratefpvrhp135 жыл бұрын
hey joshua I fly with true D and have little to no issues. i fly with left hand circular p. do you think left hand is better than right
@JoshuaBardwell5 жыл бұрын
There is literally no difference in performance between LH and RH. However if all your friends fly RH you will get slightly less interference if you use LH. But you will also not be able to spectate their feed as effectively.
@Mateyhv15 жыл бұрын
5:40 what was that, an earthquake or you have a poltergeist on the upper floor???
@JoshuaBardwell5 жыл бұрын
Dogs.
@Mateyhv15 жыл бұрын
@@JoshuaBardwell great, thought for a moment in Paranormal Activity... Nice video for updating the RF module before reading the manual. Thanks Joshua!
@rippingj60175 жыл бұрын
Hey Joshua, I'm still on 1.14, and it's been working with my mobula7, and diatone, gt,200, the picture a little saturated, just wondering if I should update to the new firmware, does it help with the saturation, I'm using the hdos.
@JoshuaBardwell5 жыл бұрын
I don't think it affects saturation.
@rippingj60175 жыл бұрын
@@JoshuaBardwell OK it mite just be the lighting on the yellow grass, with the sun, because over concrete it was fine, thanks for the reply, I will probably update it to get more features, our just wait for 1.2.5., have a great weekend.
@fpvandgasrc43215 жыл бұрын
Do you have to recalibrate the module after updating firmware?
@JoshuaBardwell5 жыл бұрын
In theory no, but it's a good idea to do it anyway.
Can I use LHCP patch antenna with RHCP Cloverleaf antenna on my furious fpv true d module ? Or should they both be LHCP or RHCP ? What combo will give my the best reception ? On the quad I am using RHCP Cloverleaf antenna. Can any fellow FPV peeps help me out ? I'm still new at all this. Thanks.
@JoshuaBardwell5 жыл бұрын
Both antennas should be LH or RH. Mixing them will severely reduce range.
@JB-cq2wo5 жыл бұрын
@@JoshuaBardwell Thanks Josh, I love the fact your there to help out us newbies. Wow a personal message to me. I have learned plenty from your videos. :)
@kwhite6215 жыл бұрын
Was that your dog bouncing around? Or your family? Lol, don't sweat it either way, JB, it lets us know you're a mere mortal like the rest of us. I don't ever have a nice quiet day to sit at my desk and work on quad stuff. Always gonna be a rambunctious kid or crying baby or something. I wouldn't be sure you're a real person if you didn't have stuff going on in the background from time to time lol
@maxiemusfpv1985 жыл бұрын
kwhite621 Joshua has a family?! Im pretty sure hes single dude
@hsinyen69425 жыл бұрын
Please help, press joystick and plug USB give blank screen (and the RapidFire Update on PC button still Red) .. if only plug USB then can see the frequency screen ,,, When turn Beat on, I can see v1.2.4 ... so maybe mine already has latest version so it will not display?
@JoshuaBardwell5 жыл бұрын
No you shoukd be able to flash regardless of the version on the module. I think uiu didn't install the ImmersionRC driver?
@hsinyen69425 жыл бұрын
What should I do now?
@hsinyen69425 жыл бұрын
Thanks
@hsinyen69425 жыл бұрын
Just received that from GetFPV in mid-December
@hsinyen69425 жыл бұрын
I re-do that from notebook PC and it works ... so probably Notebook PC has better micro USB cable than PC ... thanks for the video
@maxiemusfpv1985 жыл бұрын
People: rapidfire is the best... JB: prove it.. JB: no ill prove it. :)
@ericcredille66955 жыл бұрын
1.2.4 has been giving me slight static lines on all builds. :/
@sterby15 жыл бұрын
"all right, back to the video" - video ends Josh... just.... uuh
@JoshuaBardwell5 жыл бұрын
I was going to put that in yhe middle but I decided to get to the point faster.
@SergeantRichGolfing5 жыл бұрын
ImmersionRC why no channel search function? Okay, so you got a new build with a new VTX. Plug it up and you got to sit there and skip thru channels to figure where the video is. 2nd situation,, you at a race and want to check out another racer or another pilot flying. and hell NO I don't know what channel they flying on,,, But what would be easy is to have a search function that'll pick up the multiple channels in the area that would allow you to lock in on another pilots video with out flipping thru every channel on every band.
@JoshuaBardwell5 жыл бұрын
You use the spectrum analyzer for channel search function.
@SergeantRichGolfing5 жыл бұрын
@@JoshuaBardwell ,, thanks. I'll try that out.
@antongigihpriadi20425 жыл бұрын
I hav just by rapidfire n installing in may attitude v4, but the screen flicker wheter it near or far. For more information my rapidfire 1.0.9 n brain 1.2.4
@antongigihpriadi20425 жыл бұрын
coupd you help me with this problem, please
@JoshuaBardwell5 жыл бұрын
You should post in the ImmersionRC Hub Facebook group.
@antongigihpriadi20425 жыл бұрын
@@JoshuaBardwell thanks for the response I'll join the grup first