These Rubik's Cube Challenges were supposed to be easy...

[@JPerm]

The secret to reducing 1/6th of your solve time is to solve 5 sides instead of 6.

[@Chinesemax]

#1000000

[@hejfk]

What what!!? I’ve been lied to my whole life!

[@Jonzinn83]

No.. He's found feliks secret! Edit: I have never gotten more than like 2 likes on a comment. Tysm!!

[@greenlite37]

Started speed solving just because of your videos 🙌

[@gman-6504]

@@greenlite37 me too

[@Cubeorithms]

But can you do the legendary seven sided solve?

[@39rishitkothari78]

Nah, when yall can do the legendary pi sided solve then ur a pro..

[@OrangeC7]

It's possible with the online 4D cube 🤔

[@LemonadetvYT]

Lol

[@pfinhulk6726]

@@OrangeC7 Since I already did a 12-sided solve I can assure you a 7 sided one is possible even IRL. ...The thing is, don't use a cube. A megaminx should do the trick

[@tanhrs8711]

@@OrangeC7 some 3D rubik's things can do that.

[@harip.nambiar5674]

I average around 14-15 seconds with a PB of 9.79 Seconds. The key to getting better is not just practice, it is DELIBERATE practice. Just solving the cube a whole bunch of time will only get you so far. If you wish to get better, then you need to deliberately practice on specific things like look-ahead, finger tricks, optimising solutions etc.

[@BenTheCuber]

I average 12-14 with a PB of 7.77

[@colleen9493]

I average 21 seconds with a pb of 10.9 lol

[@theomelettecuber5458]

Same dude, I agree Ao5: 15.4 PB: 10.34

[@ephraimsension]

I average the same

[@kaak1212]

Great tip. I've been on and off speedcubing for years and my pb currently is only 44s, ok it isn't great but I'm trying to focus on practicing specific things

[@dmr778810]

The last challenge is the _perfect_ example of all knowledge, and no practice. Because it's different, you're not used to it. "Shortcuts" such as looking for the white corner don't work the same because you need to remind yourself what your cross color is, especially if the color schemes are not standard setup, or even standard colors. An easier example of this is when you try to become color neutral, or even dual neutral. When you're used to white cross, and you do yellow cross, you can end up placing Red/Blue into the Red/Green slot because that's what you're used to.

[@softwarelivre2389]

I always solved my cube as color neutral for that very specific reason. I'm not fast, but I'm flexible.

[@krishkalra756]

Ive started to try and become dual neutral and it was fun to see jperm struggle as much I currently do

[@softwarelivre2389]

@@krishkalra756 I admit I have a preference for blue, red and orange. I rarely start with green, white or yellow for some reason. I think it is because I have a harder time finding those pieces due to lower contrast between them on my cube. Gotta practice that.

[@anandanipradhan4070]

kzbin.info/www/bejne/o5i7fYWrarStrKc

[@harveym.1514]

Seeesh I average 21s and Jperm probably beats that with beginner method

[@RootsThatRuin]

I actually think the last “bonus challenge” definitely demonstrates an important point that’s super relevant to this video: the first handful of challenges were all knowledge/zero practice, the first bonus challenge was very little knowledge/lots of practice, and the last bonus challenge was tons of knowledge AND tons of practice *except* the time you spent practicing on a normal cube to gain quick recognition was suddenly not useful. You couldn’t just transfer your recognition to the new color scheme. It demonstrates how important training your brain to recognize the color patterns on the cube is. How do you do that? Yep, you guessed it, practice! Really cool, informative video, thanks Dylan!

[@ImmortalKnightCubing]

For three sides challenge ,you can solve the cube normally till OLL , and then instead of one looking the pll,use the A perm algorithm by keeping the headlights on back so that you end up with any one of the U-perms, pretty sure that would have been way faster!

[@raininq3767]

That’s 2-Look PLL where you do 2 algorithms to solve PLL. The problem is, these two alga are quite long and recognition between the two does build up, which is why 1-Look PLL is better because it combines recognition and 1 algorithm of decent length, plus the algorithms can be adapted to your feel and solving, whereas 2-Look has fixed algorithms.

[@ImmortalKnightCubing]

@@raininq3767 yes I know that’s 2 looking, but the job is to just solve 3 sides ,so we just gotta do an APerm once from the correct position and stop the timer. Till OLL part , Dylan can easily do that in 6 or so seconds , and this in the worst case takes two or three seconds more , so he essentially would solve the cube(3 sides) in approximately 9 secs

[@matthijssmulders3432]

I think he deliberatly didn't think about it like this, because starting with normal CFOP kind of destroys the purpous of the video? But if you just wanted to do it as fast as possible I totally agree

[@kenma5906]

Or J perm and F perm

[@anandanipradhan4070]

kzbin.info/www/bejne/o5i7fYWrarStrKc

[@ger128]

I really like the colors on that last cube. Something about them is very pleasing, visually.

[@KrisPBaconnn]

I haven’t cubed in like 5 years. Ive been feeling empty and gaming wasn’t satisfying me anymore so I dusted off my Dayan Zhanchi and started back up. I used to watch CBC religiously and he was inactive when I checked but I found your channel and I’m glad to see the cubing community is still “thriving.” I enjoy your videos, and made my first purchase at Speedcubeshop. Thanks for what you do! My current Average is 40 seconds and PB is 23 (PLL skip). Goal is sub 30 Avg! Edit: 2 months later and my average is 28 seconds

[@micro5298]

Happy to hear that and good luck with your goals :)

[@anandanipradhan4070]

kzbin.info/www/bejne/o5i7fYWrarStrKc

[@DetCoAnimeFan]

That is easy, you will get there very fast. I am currently averaging about 17-18 but on a really bad cube. It is so bad that I am confident that I can bring down my average to less than 15 seconds just by getting a better one.

[@qwerty_qwerty]

@@DetCoAnimeFan is it worse than my Rubik’s brand that I put Vaseline in a year ago?

[@riukywastaken]

wow, never seen a PLL skip in my life before, it is so rare

[@Multicubing]

“It ended in a J perm!” Fantastic. I really like the challenges. Great stuff!!!

[@TheRomanNumeralVI]

"Mathematically, that means solving all eight corner pieces takes me zero seconds." Yes. That is how you math. 🧐

[@anandanipradhan4070]

kzbin.info/www/bejne/o5i7fYWrarStrKc

[@itsdarkhere]

My soul died when I heard that

[@gud_boy]

meth*

[@User-Cedartree]

😂

[@HopperYTRealChannel]

Got a 58 once and an average of 1:34 in 7 days using the beginner method. lucky random f2l cases randomly popping into place without deliberate construction also helped and solving the middle layer is fun when all the pieces needed to make the second layer whole, are already there but in the wrong spot is a joy to work at because I can look at the piece coming out and instantly realize which color it corresponded to. Using a Bluetooth cube like the i2,i3 really helped me understand cube notations and made it easier to learn algorithms by glancing at motion lines and reading cube notations

[@ace_falken5362]

Really glad you threw in the beginner method solve. It was fun to see how fast you go with the same method I use. My PB is 28 seconds, average about 40 Anyway, dropping a comment to say I loved the video.

[@tanhrs8711]

7:59 🤣 I love the comment!

[@DeviatingVapors]

alt color schemes is what you should probably practice then. I have had a few cubes, and all have taught me what I know AND really what I don’t know. then I migrated to pushing myself to do every solve in a different start (color). shows very interesting patterns and color combinations (in the solve) sometimes. columns first. that’s a new one on me.

[@shawnbui8795]

6:16 I thought it will take 0 seconds mathematically

[@PeeperSnail]

Cube: - has pastel color scheme - Jperm: - confused screaming -

[@STLLR-Nova]

J perm at 5:25 : I had some pauses Me: k solved first layer lemme take a bathroom break

[@LIA-52]

Bonus challenge 2: I do that in every practice session, because I have stickered my GAN12PE in a non standard way: white-blue, green-red, and yellow-orange. During practice I either grab that one, or my GTS3M, so I have to keep in mind which cube I am using, and not accidentally think about my other cube (which I may or may not have done a few times).

[@zaairadnan7256]

I stoped practicing the 3x3 cube. my average time kept increasing and I didn't know why but now that I have watched your video I know the solution to it thanks jperm 😊

[@tysont3323]

How often would you check your average time

[@zaairadnan7256]

@@tysont3323 I just kept solving and I ckeck the average time of like 100 or 50 solves

[@anandanipradhan4070]

kzbin.info/www/bejne/o5i7fYWrarStrKc

[@senpxi_7477]

@@zaairadnan7256 what's your average

[@wizardflame6808]

Columns first seems like an ok method. Columns in 2 seconds, centers 0.5, edges 3 to 4, top layer alg 0.5. You would need a bit of practice to reach these but and they are complete guesses based on me trying slowly without actually looking at the method. For it to be effective you would need every pll skip from oll alg.

[@TheIliteratePoet]

The key to getting better is pace yourself. every month or so I take a 5 day break from cubing and when I come back it feels a lot smoother. I’ve even decreased my times before

[@mohitdhaker4480]

Yeah,that works for me as well i got to being sub 23 from sub 25 after a break

[@TheIliteratePoet]

@@mohitdhaker4480 yeah I went from just over 30 to about 25 seconds

[@Rekusasu827]

Frog

[@countryballsanimationsandm5362]

@@TheIliteratePoet me as well but it was a 3 day break

[@User_K653]

The ones who solve a Rubik's cube side-by-side: I can only solve 5 sides

[@Pruvireads]

Okay, that last bonus challenge cube looks GORGEOUS! I love pastel colors so I might me a little biased though 🙃

[@oscarlubliner8388]

Scramble your entire collection of 200+ cubes and do a livestream marathon in which you solve all of them.

[@DVSS77]

1:29 j perm being sneaky with the Y axis

[@Mooster123]

I solved my first cube using your tutorial. Thank you Dylan!

[@ghostsknives8914]

So good it takes 0 secs for him to solves corners 😂 Random cuber “how fast can you solve all the corners?” J perm “ picks up cube” Random cuber “😧”

[@michelleshi9655]

Hi J Perm, I received the J Perm RS3 M 2020 about a week ago. I Love it. It’s like magic the turns are really satisfying. Thx

[@warrenpeace6807]

Here’s a challenge: solve the Rubik’s cube but for every turn, do 3 turns to the opposite way instead. And time yourself :)

[@ofrilifshitz7518]

Only moving in double prime moves is interesting, wonder if it's possible.

[@smortboi1320]

@@ofrilifshitz7518 in order to solve a cube in double moves, it must be scrambled in double moves, since you need every side to have been turned by a multiple of 2. He's already done a video on this

[@theomelettecuber5458]

U2=U6

[@mistymysticsailboat]

This suggestion gets posted on literally every challenge video

[@anandanipradhan4070]

kzbin.info/www/bejne/o5i7fYWrarStrKc

[@troliskimosko]

You’re so right. I took probably 15 seconds off my average with essentially NO more knowledge. Just 20000 plus solves under my belt. Which is cool because, if i learn all the new things as well, i’ll probably be sub 10! Motivating

[@bilingualchad]

Not only do you mathematically take 0 sec to solve the corners, you actually take 0 sec to solve corners, because you solve them with the edges. That's why f2l+full oll+ full pll is faster than the beginner f2l (corners then edges)+2 look oll+2 look pll

[@mews1009]

i really loved the music for this vid, idk why i liked it so much, i just did

[@trentthen642]

Babe wake up J perm uploaded

[@jinanshshah3348]

I would like to add on, that practice and knowledge will surely make you better but one more important thing is THE RESOURCES! They add a lot to our lives, let’s take a 1980’s cube vs today tan 12 maglev! Of course better resources can make you BETTER! But hats off to this man for making such a quality content.

[@redmouse2024]

Your videos are full of comedy I really feel motivational and after learning 3x3x3,4x4x4 rubik's cube I decided to learn blindfolded cubeing with 3x3, with your video about explaining the buffering technic with cards I really get confused but I am trying my best

[@thom_lapatate4842]

I only practiced the beginner method but my best is still a respectable 24 seconds even though my average is more like 45 seconds lol Great video!

[@PandaZ0812]

same I average around 37 seconds but my PB is 26 seconds and it wasn't even a super good scramble I got an OLL skip but F2L was average and idek how I did it. I use CFOP btw

[@happyeevee4955]

i literally have those numbers, maybe my average is like 5 seconds slower and best is also 24

[@liuguibin9329]

4 sides:cfop and auf is (U2 R2)3 3 sides:cfo+a perm 2 sides:cfo 1 side:cf

[@ImNotKX20]

0:26 unless you twisted a center lol

[@gumbitoicic9977]

How do you twist a center lmao

[@ILoveMath_Cats_Coding]

???

[@RelaxingSounds-mh7tx]

Like changing the color of it????

[@Jevon-sr2li]

@@RelaxingSounds-mh7txyes if have two 3x3s

[@georgemuellertrickshots6249]

Jperm in any video involving anything to do with 2x2: Now guys I haven’t practice 2x2 in eons so this isn’t going to be too good.

[@PikaPlayzzMC]

2:50 I cannot express how accurate this is. I average like sub 15 now and I haven't learned anything new from when I averages about 30 seconds. I actually have been getting sub 10 solves more recent and even got a sub 9

[@troliskimosko]

same !!!

[@tanishdesai7652]

Hey jperm, what you said about practice is completely true. When I had a 1 dollar cube, i practiced with it till i almost reached sub-1 minute. After I got a speedcube(non-magnetic MF3RS) i reached sub-30 only with intuitive cross and Intuitive f2l (and ofcourse, practice) I recently bought a RS3M2020, and only after learning full PLL and little bit of f2l (5 to 6 algs) AND practice, .... . . .I reached sub-20, hitting my PB at 15.6 secs. Without learning full CFOP. Throughout this journey, your advices helped a lot. Thanks

[@samuelvillaflor5613]

To solve 3 sides just get a J Perm!

[@Uaperm283]

For 4 sides do R2 U2'

[@GhastHeadMC]

U perms work 2

[@priyankagurav]

Megamind

[@superdejan64]

2:50 I can confirm this, I learned 4 look cfop not too long ago, and I barely average 50 seconds, while you managed to get like 10 seconds with 4 look, and that's because I haven't practiced it much, like I literally learned the method like a week ago

[@shirothefish9688]

10:15 As someone who learned the beginner method and subsequently used it as a sort of fidgit tool for a couple years idly I managed a 57s time without even intentionally trying to learn to get faster. Absolutely is possible.

[@MrLuigiBean1]

Same here! Been doing the beginner method on and off and my best is 58sec! But now that I'm binging cubing videos, I think I'd like to learn some of the advanced stuff. 🤣

[@proredfly9410]

i once got a 30s beginner method because its all ive ever known, and i had to go fast for reasons

[@arhaam1390]

Hello J Perm ! I want to ask that if you only have 6 dollar to spend on 1 lube for MoYu RS3 M 2020 then what lube will you buy from SpeedCubeShop. 1. Martian 2. Lunar 3. Stardust 4. Nebula 5. Galaxy 6. Comet 7. Cosmos 8. Solar 9. Vortex 10. Jack o' Lantern 11. Candy Cane 12. Speed Lube Weight 1 13. Speed Lube Weight 2 14. Speed Lube Weight 3 15. Speed Lube Weight 4 16. Speed Lube Weight 5 17. Speed Lube Weight 6 18. Speed Lube Weight 8 Please Reply J PERM. Thank You.

[@jonathanchen1834]

Hi, im not j perm and im probably very late but if you want a faster cube, get Lunar, and if not you can get Weight 1, which is a nice all-around lube. My favorite lube is lunar, which is what I put into my RS3M

[@elitestylezgaming8426]

hey j perm! i use this method for my F2L, i insert edges, then corners after and i average under 25s with it. when i use F2L however i average high 20s. so can i use this method or do i have to do F2L to be fast? and i do i have to learn full oll? it doesn’t make a difference to me making the cross and i don’t have the time. but i did learn most of full pll. great job on the videos keep it up!

[@graydient1106]

bro, do f2l normally, itll pay off

[@buckethead60]

I would suggest learn F2L, then full pll, and then full oll. It will hurt your times a lot but eventually it will pay off.

[@elitestylezgaming8426]

@@buckethead60 i know most of full pll and i know F2L. but full oll, i don’t have the time. the cross is easy to quickly make, so i don’t think full oll is worth it. i think i’m better off improving on full pll and f2l rn, and just getting real fast with 2-look oll. i mean j perm averaged under 11s with 4look last layer so i know i don’t need full oll.

[@Homeless_Pigeon_History]

you should learn f2l, and at first you'll see your items dip a bit, for me it was even 20 seconds, but eventually with practice you'll get back to your normal average and even better

[@elitestylezgaming8426]

@@Homeless_Pigeon_History guys, i know F2L, but i’m asking if i should improve on it instead of my f2l method: and now i’m guessing yes..

[@robertglennrg3]

I have a 40 second average so I’m glad you reassured me about practice cause yesterday I learned so many algs and tricks hoping I’d get faster. That’s all thanks

[@thephysicistcuber175]

5:53 why not use 3-style yo?

[@ImNotKX20]

10:47 what do you mean by knowledge, like memorization of algs

[@JPerm]

Generally just algs and steps

[@ksspeedblindfoldedsolving843]

For solving 4 sides just solve the cube and then flip 2 edges 😂

[@Kopko2op]

Yea😂

[@andrewqi6695]

well yeah but thats not the point

[@jackweslycamacho8982]

You can’t do that though

[@blackwatercat4263]

9:54 who else is hyped to see what that blurred cube is?

[@НикитаГорелов-ф5у]

0:04 solve 5 sides of rubik's cube impossible

[@X4R80]

Take a rubberband and put it so it touches two corners and one edge and then try to solve it

[@VishalPandey-bz5wl]

2:00 Bruh just get a u , j or f perm to solve 3 sides

[@kobebryant9101]

You are the nicest prson in the world u help me so much and i wish u do very well in life becuse u alwasy make me alaugh and stuff so i just want you to know i love ur script and u r great

[@bennette.7033]

jesus loves you !

[@KA_Edits834]

Amen

[@MizhiBirb]

I dont

[@LoogpyKid]

Npx

[@LoogpyKid]

Npv

[@LoogpyKid]

Npc

[@randomperson-yj1xo]

your the only youtuber i recommend for cube videos for fun and tutorials

[@ggplayz14]

as a cuber whos transitioning from beginner to cfop, i can surely say that it takes a lot of practice to improve your time. i mean, i timed myself lately (well not the whole, since i immediately give up), compared from my average sub 1 min in beginner method, i cant even complete f2l in under 1 min. but im sure with more practice, i could be faster.

[@rudrodeepchatterjee]

You know, the restriction was not to solve all the sides to complete 3, 4, or 5 sides. But you could still solve the cube entirely, and perform some kind of J perm, or T perm to mess up a few sides to have a faster time. Maybe solve all sides, but make a 2-swap of three top layer edges for 3 sides. For permutation only, maybe do a full solve, and make a superflip.

[@noahho8482]

6:10 ah yes, solving corners in 0 seconds makes a lot of sence

[@endergamerz5856]

Hey j perm I love your all video you have reached me how to cube, how to solve 2x2 3x3 4x4 5x5 and others too I love your channel I wish you never leave your channel :)

[@trending_mobagames]

Solving all edged pieces. I do that before. Haha. And using fish algorithm in the rest of the corners

[@justluxky]

11:04 i like how it's called this thing lmao

[@minjawee]

Hey J Perm, I’m relatively new to cubing but I had an idea for a competition. I’m not sure if its been done before or not. Nor do I know the likeliness of you even seeing my comments but here goes. The competition would be… Either a blind solve or a minimum inspection time to see who can solve the cube in the fewest moves. Everyone gets the same scramble and every round is a new (but same for everyone) scramble to see who can consistently solve in the least amount of moves possible. 1 try each round top times move to next round sorta like 64>32>16>8>4>2>1 elimination. Time could be used for tie breakers.

[@nbs2024]

That's FMC

[@nbs2024]

It's already there

[@minjawee]

@@nbs2024 Thanks, I wasn’t aware they already had it.

[@gabynoo9228]

3:40 if you solve all the cube but make an M move counts like 2 sides solved

[@Mariocraft97]

2:52 This rings through for me, the guy that refuses to adapt from the beginners method but still get 40sek solves. Practice works.

[@mohammadformanulislam2254]

Can you solve my requests(please):- 1) Make a video on how to inspect the cube properly....... 2) What was your average from your early days(when you started cfop) 3) What is your PB now..... 4) when I do OLL & PLL algs, I mix one algorithm with another. What should I do? 5) Can I be 'The Chosen one' to get answers from 'J Perm'.........pleaseeeee.....

[@BBYDJ]

Let’s get jperm to 1 mil! We’re almost there!!

[@pinkflar3161]

Him: I haven’t practiced 2x2s. His channel logo: casually a 2x2

[@chilis_son]

you should try a 4x4 solve but only inner layers or 5x5 if this is even possible, love your videos have been watching you for a couple of years you have helped me get faster, thank you J Perm 😀

[@TheCubingAmateurs]

I LOVE YOUR CONTENT SO MUCH keep up the great work

[@priyalpatil7638]

I was wishing for new vid nd here it is what a look ajead

[@TX2015]

To add as a thing to the beginner method potential, I practiced beginner method for a year, taking it from my 2:40 first speed solve to my actual PB of 33.58 seconds (I got this PB 5 years ago, it still is my fastest time) EDIT: I recently broke this PB with a 30.45 in a homemade competition at Salsipuedes!

[@MintyMemess]

Where is the video of making the patterns the comments suggested on the 21x21?

[@arhaam1390]

Could You Please Post A Video On How To Solve 7*7*7 Tutorial

[@john__lee]

The simplest explanation is because you’re not used to it. You are used to solving all sides of the cubes so many times it becomes muscle memory, it’s like switching from kbm to controller

[@mynameisspork5592]

hi i just wanted to know how i can fix my 3x3, so i took it apart for fun but when i was putting the last piece in and the plastic part broke, and this is my only cube and i dont wanna bye a new one

[@ashwinibagaitkar8516]

Jperm : I’m going to be doing some wacky stuff Me: * just laughing so hard*

[@TheOrigamiGenius]

Challange: *Exists* Dylan: Challenge accepted

[@Reverse_Cem]

I love the word mathematicly and when he says mathematicly.but there is something not mathematichly is me avverraging 30 seconds with the side by side methdot(its similar with begginners method)method and avverragging 1 minute with cfop

[@rebronjames6315]

I am colorblind and have problems with color/pattern recognition. Is there a way to get better at this or is there a cube with really defined red/green/orange colors or a color scheme that works better for colorblind people?

[@molybd3num823]

if your cube is stickered, you can get stickers with colors that tpu can distinguish

[@JKKoh-pq9nj]

Hey Dylan, don't know if u would see this but i was hoping u would make a tutorial about how to solve a mirror cube with all the face being pictures (meaning the pieces is a mixture of multiple colours/paterns). I know how to solve a regular mirror cube but I just don't know how to orient the directions of the pictures so that it appears back to how it was. Thanks.

[@sujachintha3195]

I just got a sub 20 but I use a rubiks brand cube so should I get a new speed cube

[@ajbiffl4695]

An idea for a challenge: go from an unsolved state to an only-double-turn-solvable state (so all opposite colors on both sides), and maybe to add a layer of complexity go to an only-double-turn-solvable state where at least one of the sides has a specific pattern on it

[@rokasrokas3716]

i started cubing yesterday and the best i did iz 1:33 but thats mostly because i got lucky.What shouldi do or learn

[@cubebeast6479]

Like your new timer

[@RainbowDashShadesOfApproval]

I posted this on adifferent vid, but.. I'm new to cubing. Is there any good suggestions on a nice smooth cube? Every one I've owned were basically the old school ones that always lock up and were hard to turn. Note: I went on to speed cube shop and currently have the cosmic GAN 11M Pro in the cart. The page says I'm qualified for the free express delivery, but the delivery selection does not reflect that. How do I get the free shipping applied? And, is this a good start or should I look somewhere else?

[@robloxgabe3160]

I think start with something cheaper like rs3m to see if you like magnets or not or like the feel

[@robloxgabe3160]

Or gan 356 M if you like customizability and/or need a gan cube

[@robloxgabe3160]

Just my opinion if you wanna start big start big

[@RainbowDashShadesOfApproval]

@@robloxgabe3160 fair enough, I'll look there when I have the money

[@jacksondunivan4034]

Hey Dylan, I was wondering if you can make a vid on how to solve a square-1. I and many others will appreciate it if you can

[@yesitsarmita2722]

u solving the different color scheme is me solving in front of my family. love your vids :DDDD

[@cubiksrube1219]

Love the arctic fox timer😍

[@arghofootballzz2520]

Following since 2018, take love from Bangladesh

[@Aarush241]

Can we appreciate this timer it’s beautiful

[@123dontdoxme]

can you solve the 10x10 into a 5x5 like you did with the 4x4 6x6 and 8x8?

[@RIP_BLACK_MAMBA]

for the five sides just do your regular solve but when you finish your OLL just stop

[@davidthedvd3144]

J perm you should do a challenge where the cube gets worse and worse and you have to solve it

[@ojasdreamgaming426]

Your new timer is supper ultimate cool in looks

[@gla6417]

jperm: so matematically solving corners takes 0 seconds, also jperm in the next challenge: does the corners inatantly

[@Ghhcrcgvuhyvgf]

can you please do a skewb tutorial 👌 i cant find a good tutorial and you do the best tutorials

[@Mr_Spaghetti]

KZbin: Hey check out this Rubik’s cube video. Me: KZbin, it’s 2am and I’ve literally never watched a Rubik’s cube video before. I’ve never even solved one. KZbin: … Me: Okay you’ve convinced me, start it

[@Kosmiczna]

my first speedcube had that colourscheme, it was SUPER fast that when i switched to the cube you recommended, the Rs3 M 2020 i was kind of sad that the cube wasnt as fast as my old one and that if you made it looser so that itll be the same speed as my old speed cube itll be really flimsy, but unlike the old speedcube i own it had really good corner cutting. I wouldve liked a faster cube tho