HOW TO BECOME A SPEEDCUBER

A guide on the best way to enter the world of cubing, and eventually become a legendary speed cuber!
Cube ► JPerm RS3 M 2020: speedcubeshop....
Complete Speedcube Recommendations ► • The Best Speedcubes [2...
SpeedCubeShop ► speedcubeshop.com
Using the code "JPERM" supports my channel and also gives you a discount on your order.
Timer ► cstimer.net
Beginner:
2x2 Tutorial ► • Learn How to Solve a 2...
3x3 Tutorial ► • Learn How to Solve a R...
4x4 Tutorial ► • Learn How to Solve a 4...
5x5 Tutorial ► • Learn How to Solve a 5...
Special Tutorials:
3x3 One Handed ► • Rubik's Cube: How To S...
3x3 Blindfolded ► • (New) How to Solve the...
Advanced Tutorials:
2x2 ► • How to Get Fast at 2x2
3x3 ► • Beginner + CFOP Method
4x4 ► • How to Get Fast at 4x4
5x5+ ► • How to Get Fast at 5x5...
Facebook ► / jpermcubing
F2L Algs ► bit.ly/bestf2l
Patreon ► / jperm
Merch ► teespring.com/...
Algorithm Trainer ► jperm.net
Written Tutorials ► jperm.net
Special thanks to these generous Patrons:
Erika Greggs, Dio Brando, Patrick Flückiger, Eric Kau, Cubing for Eternity, sanjay, tim rossetti, Lv.99 Mastermind, kubesolver, Asteroid, Ivan Marinkovic, Gregory Martin, Jan Strohbeck, KingParity, Bhop lol, Ryan Penkala, poidpd, Nikhil Apte, Seth Crouch, Matthew Dugan, neelabh, Vini Villeda-Rosa, ePicuBer14, Antonio Bonessi, Will, Alex Lengacher, Klára Németh, Jill England, Vince Xiao, Mauro Caffaratto Grandes, Priyam Brahmkshatriya, Aaron Morales Dolich, Shayan Gupta, MELISSA J CLAGUE, Arav Trilokekar, Albert Cinca, Bruhath B, Nakano Kyohei, Leszek Gawron, Chris Bonnello (Autistic Not Weird), Petrified, Benjamin Force, James Moore, Dmitri Shabes, Csaba Daday, Amay Saxena, Edan Maor, Takeshi Yanagita, Jane Qiao, Michael Mendoza, Philippe Schwartz, Derek Wong, kyle, Poor Junior (We All Can Relate), JC, Dominic Klyve, Jason Murray, Andy Henline, Bob Brantner, Declan Manning, Michael P Deslippe, Hoang Nguyen, Stanley Wesley, Murtaza Azad, Fuzzy Sanders, Cubing Madness, Mark James, Spencer Gray, Tom Blanco, John Adams, Jochen Bauer, RedKB, Fred Strauss, Rick Lush, Letin, Chris Cobb, Allan Chochinov, Martijn Schiedon, David Brown, Taco, Mike Sampson, Rob Peters

[@JPerm]

Leave a comment if I left out anything important! Edit: the only non-speedcube lube I'm aware of that works well is Traxxas 50k or anything similar. I don't think there is any common household item that works well as lube unfortunately.

[@raycuber6153]

Thank you Jperm, you have helped me get sub-20 with The Rs3m 2020 ( Bought it after I watched the review! ) Anyways, thank you!!

[@guilherminhookkk]

ok

[@oliver.hrn7]

no

[@neoglazier2813]

Maybe the captions but otherwise noice video

[@AnunayMintoo]

K

[@v1nzaro]

I think you missed that F2L is gonna make you slower at first but once you get good at it it'll make you so much faster

[@JPerm]

Yes I forgot! It's very important for new learners to understand so they don't get discouraged.

[@vybzcubing7272]

@@JPerm yeah

[@Ryan-fj5vq]

I remember it took me twice as long with f2l at first then beginners then after a month only there was improvement over beginners

[@combustbanx]

it's way better to be slow with a good good technique that to be fast with a bad technique

[@ZeroMirrorr]

my F2l is still slow and its been months. Still averaging at sub 1. Yeah sub 1 minute. Although I was 1 min 20 so I guess you could call that "progress".

[@grossarl1]

the fact you actually said ‘that’s my *biased* opinion’ is actually wild. most youtubers can’t accept stuff like that and it’s good to see someone with some integrity

[@inseminggd]

And the craziest thing is that he could have gotten away with it, cause i think its a great unbiased answer as well. With a setup cube you get to know the difference between a lubed and an unlubed cube (once it dries out), that way you can tell if its worth it for you or not. I can speak from experience because when i started cubing i thought lube wasnt worth it, until i got some lube (and it wasnt even a good one)

[@Rabarbaraaa]

Hi! Im 15 and and i first started to learn how to solve a cube in 6th grade. After that I just quit but then I met a dude that is like on national level of speedcubing and now I’m back into it! I average at like 45 seconds now and your tutorials help so much so I just want to say thanks and continue doing what you do jperm!

[@theautisticturtle4817]

Same I'm just no quit part and I'm in 7tg

[@TheHispanicUsername]

Same here except the quitting part hasn't happened, and instead of national record type stuff it's state record stuff and i'm also in 7th grade (12 yrs old)

[@Ecsaqt]

I'm in 6th grade and I also average 40 seconds

[@destinkuiper]

Is a nexcube to good?

[@JaysonPL]

just wanted to ask but after 1 year, did you made progress on solving the cube faster than your average?

[@pianopianist5709]

My RS3M 2020 arrived yesterday, and I LOVE IT. It's sooo smooth. And it corner cuts slightly over 45°, and it's the *best* cube I've ever had

[@realcopoolman]

Cool, i got it too. But the fun thing its my first speedcube 🤣

[@pianopianist5709]

@@realcopoolman Haha same, it is my first speedcube too, it just got a stripped core. I probably (disassembled?) it too much, don't make the same mistake as I did

[@realcopoolman]

@@pianopianist5709 lol

[@realcopoolman]

@@pianopianist5709 well i have my cube for a week and got it lubed,i disassembled it but it was ok.

[@pianopianist5709]

@@realcopoolman Yeah but don't do it a lot, I used to do it once every 5 days and it got a stripped core within 6 months

[@natpur1gaming410]

Speed cuber Timestamps 0:00 - 0:20 - Intro 0:21 - 0:52 - New/Better Cubes 0:53 - 01:15 - JPerm’s Recommendations 1:19 - 1:40 - Speed Cube Prices 1:41 - 2:09 - Other Fun Puzzles 2:10- 3:08 - Should I Get Better Cubes? 3:09 - 4:48 - Timing Apps/ Products 4:49 - 4:54 - Stack Mats 5:01 - 6:11 - Lube/Lubricant Recommendations 6:14 - 6:21 - JPerm’s PromoCode 6:22 - 8:23 - Cubing Methods And Solving 8:24 - 8:55 - Competitions 8:56 - 9:16 - Trying Blindfolded Or One Handed 9:17 - 9:33 - Outro/Credits

[@v1nzaro]

*timestamps

[@xzoxxPlays]

thx

[@allthesith9616]

Thanks!

[@caydawg4893]

I love people like you

[@v-rex5715]

I started getting back into cubing 3 days ago, forgot how much fun it is! Your tutorials are really helping me get better at F2L, thanks J Perm!

[@clubcubing3723]

Good for you!

[@Danoxii]

That comment is a year ago i wonder how you are now

[@sweetysureka1573]

Yay

[@nikhilkotturi7682]

I just came back few days ago after 4 years and even back then my personal best was 45 so need to work on it

[@fyve2806]

same here, gonna comeback soon with 2x2x2:) Edit: It's been 2 yrs and how are u?

[@DanaYi13]

Me watching this video: "hmmm yes I definitely didn't know this, but I'm still thoroughly enjoying the video as always" :)

[@kscuber5865]

Hi Dana!!

[@5tuffz]

Same here! Been cubing for 5+ years now, but still learned something new

[@JPerm]

Dana you should get a 4x4 it's really easy to learn since I know you can do the 3x3

[@vybzcubing7272]

@@JPerm yeah Sir, she should

[@foolishkai1822]

@@JPerm ive tried to learn the 4x4 but its a lot harder for me to learn than the 3x3 for me. Ig its different for everyone but ive tried multiple times to solve a 4x4 even though i got the 3x3 in a day

[@InstantKarma-xt8zt]

My first ever average at a competition was 36 seconds but then when I learnt beginner CFOP (cross on bottom, beginner f2l, beginner oll and beginner pll) I decreased my time by 12 seconds in 4 more competitions. Highly recommend learning it.

[@kairebernjak3550]

Me: Is speedcuber Jperm: HOW TO BECOME A SPEEDCUBER Also me: still watches video cause its Jperm

[@advier01]

now im speeder speed cuber

[@juns5979]

dude it's Jperm

[@5tuffz]

He makes such practical videos

[@TesserId]

@@5tuffz I'm officially addicted to them.

[@justprobus64]

@@TesserId yes

[@nameless5053]

F2L is like the graph of the function *y = e^x* It starts slowly but then suddenly goes up really fast. Same with F2L, at the start you're slow but with time you get much faster

[@countryballsanimationsandm5362]

YES!

[@junker5461]

ye

[@coolguybraydan2758]

exponential growth

[@dabmachine1]

more like cuberoot x or ln x

[@gurpreetkaursethi1971]

​@@countryballsanimationsandm5362 you are cool

[@colinwxiang]

HELPFUL TIP: If you don't have a stackmat timer (like me) then you can hold the two ctrl keys to start the timer. It works a lot like a stackmat. Like so others can see!

[@KiWi220]

but where will we drop the cube? on the laptop screen?

[@colinwxiang]

Sorry, I didn't think about this. I use a desktop instead of a laptop

[@KiWi220]

@@colinwxiang yeah it works well for desktop sorry if my comment hurt you its a nice idea

[@zenhunter3552]

Nice tips

[@Lohipohi]

@@KiWi220 probably

[@Enavoid]

I find it really useful to learn other methods/events like One-Handed, Blindfolded, Roux and ZZ, so you have a better general knowledge about how the cube works. Before trying Roux I really couldn't do slice moves, and after trying to learn some EG-1 algs for 2x2, I learn a lot of useful fingertricks! Roux and Blindfolded teached me quite a bit of wide moves, and One-Handed... It's a completely unique set of Fingertricks, and it developed my pinky muscle memory so much! I haven't tried ZZ yet, but I'm pretty sure it's good for learn when an F2L case (usually) needs a rotation or not.

[@fliprpo4914]

It’s fucking impossible

[@KiWi220]

@@fliprpo4914 no it's not

[@wafatanzeel1503]

can you say that again but in english pls

[@joshk147]

Learning the beginners method and cfop was what originally hooked me into cubing so learning new methods or events helps keeps me interested

[@cupstackingkid907]

can you make a video on 2 sided pll recognition? Not just basic things like when the headlights are on the left, but being able to recognize from 2 sides from any angle. I feel like there’s a lack of videos like that on KZbin currently either way great video as always, and congrats on 500k :)

[@1akirasan1]

There is a very good tutorial on KZbin. Search "2 Side PLL Recognition Guide (Simple)" or "YE8VCt8QsAc". It helped me a lot, especially with cases where there is no headlights or blocks in sight.

[@Bubbletubb]

You could probably do this yourself, just do a lot of solves, and when you get to PLL just stop and really think about what case it could be, if you need to pull up a PLL case pdf that could help. Good luck

[@helenzhao2926]

I got told "do f2l intuitively and ended up making my own f2l method with a combo of advanced and begging such as putting the edge and corner into the bottom layer simultaneously without having to pair them up. However I think I have a much slower method to get them into the top layer in the first place as I'm not very good at recognizing patterns. Currently still working on it with an overall ao50 of 56.34 seconds

[@HelloEatsLead]

I do my own method of crop and I get sub 20 solves keep practicing !

[@livingpicture]

It seems to me that F2L is probably the easiest and most intuitive to learn to do it quickly. I'm not too worried about cube rotation, making the cross on the white side quickly, but I am very interested in learning the OLL & PLL steps of CFOP. On the other hand, I doubt I'll ever really take up speedcubing, which is probably why I'm not too worried about trying to speed up. I'm sub 2, and pretty happy with that, and it's enough to amaze my kids! lol! Even though I won't take it up myself, thanks for all you do to make speedcubing accessible to the masses! :-)

[@yosua0]

Sub 2 would surely amaze anyone on this planet… 😳😂

[@HuyNguyen-ll9gz]

Sub “2”

[@unnamed5338]

sub 2? is that a new world record?

[@rohanprabhudesai9394]

Sub two minutes I think

[@Plant_btw]

Im pretty sure he means 2 minutes guys

[@shelleylambert7546]

Hey there my friend. My name is Josh and although I'm not a cuber I enjoy your videos and thought you deserve the praise. Your statistics and research is very good along with your delivery of information. I like watching your unboxing videos and my wife and I zen out sometimes to them. Wish me luck because in the future I plan to comfortably solve my own cube. Take care!

[@shashisharma2049]

I have learned 3x3 and 4x4 blindfolded from you. Really Thank You Sir.

[@jperm2344]

sir?

[@MaximMarkiw]

I started cubing in the summer and everything you say in your vids is 100% true. You helped me improve and I thank you for that

[@ipaqcrazy]

I literally learnt almost everything I know about speedcubing from this legend. Like seriously full cfop and ortega was a nightmare before I saw this channel.

[@wolfcubing5848]

I literally bought the 4 puzzles he mentioned that would be easy to solve right after my 3x3 what the heck

[@JPerm]

I've been watching you. 👻

[@wolfcubing5848]

@@JPerm I am terrified

[@aleontecristian9260]

@@JPerm i did same actually, what a coincidance😮

[@vinayaktyagi1001]

he _knows_

[@gamingjedi52]

@@vinayaktyagi1001 you mean he *knows*

[@proalgcuber198]

Hey Jperm, I doubt you'll see this but, thank you so much for the videos you have made for the past year, thanks to you i was able to improve so much, i went from a 4 minute best single to a 12 second best single in 1 year, thank you so much.

[@lawrenceandrade2622]

I'm newbie but I can done within 1 minute and 40 seconds

[@lawrenceandrade2622]

Can i be more faster?

[@proalgcuber198]

@@lawrenceandrade2622 wdym

[@unnamed5338]

@@lawrenceandrade2622 of course

[@isthe3573]

@@lawrenceandrade2622 yes, just practice cfop or roux. it makes you slower at first but you will be 2x faster when you are used to it.

[@sagniksaha9956]

Okk Got it JPerm , I am done with the beginners , solve the cube sub 40 secs , now my goals are CFOP , One handed and blindfolded eventually.

[@MatthewLiuCube]

2:00 I'm not the only one that noticed that J Perm was waving at the Mirror blocks, right?

[@officialveerbajaj]

Wow good catch!

[@Karlenk0]

I cant unsee it now

[@bigdoge]

Your not alone.

[@SparshVaish]

You're not alone

[@videoawesomeness5234]

nope, i saw it too :D

[@aaronwang9817]

"Leave a comment if I left out anything important!" In the video, you mentioned how weight 5 can slow down the cube, but newer cubers may not understand the importance of slowing it down (they may think faster => better). This may dissuade them from buying the best lube. I guess you could explain why slowing down the cube is important in the description/pinned comment?

[@aaronwang9817]

:sadlife: editing a comment removes auto-removes hearts just went to fix my grammar lmao

[@lumina_]

L

[@spyder2290]

4:31 He beat the world Record!

[@alizafar5038]

**DISCLAIMER** The cubes NEED to be paid actors otherwise this won't work

[@shortmemeguy248]

I found a similar vid kzbin.info/www/bejne/aJSkp4iaaLunnac and also nice 420 likes

[@okeydoesstuff1105]

Lol

[@guatemalaballmappers8989]

@@okeydoesstuff1105 😂 LoLyou so funny

[@xAntisune]

@@guatemalaballmappers8989 lmao what

[@OmicronGaming]

4:33 2.19 3X3 REAL NOT CLICKBAIT

[@sinpi314]

Verified youtuber with only 1 like :O

[@rivql428]

Are u a cuber?

[@Someonex017]

Omg Omicron Is A Cuber?

[@sinpi314]

@@Someonex017 ikr‽

[@diamondgamingstudiousmrdgs]

You a cuber?

[@SJTAZ1]

I’ve just got into speed cubing! Watching your videos have inspired me to give it a try. Now made the next step and ordered the JPerm RS3 from speed cube shop. Just realised I’ve forgotten the discount code😊😢 love the videos keep them coming!

[@TheCoderBroOG]

I was literally watching an old video of yours and then I get the video notification of this video. So now watching this one :)

[@colinstorm2892]

7:40 that looked so satisfying tbh

[@ankushkumarmaity9785]

Learn oll and you would get satisfied in every solve

[@parth5579]

Congrats on 1 million subscribers and the very first curbing channel to hit it

[@nname8243]

not gonna lie, at first I thought this video was going to be like the "how to practice effectively and improve faster" video and wasn't expecting a "serious" video

[@zakiabintang7045]

It's not april 1st that's why it's a serious video unlike the other one

[@incidius_X]

I started with like a 1$ rubik’s brand that someone gave me and I moved to even a very budget speed cube and it felt so amazing I can’t imagine what something like a GAN 11 M pro would be like

[@bubbles13244]

It's actually not like it's God mode. It's good but it's not like super good

[@bubbles13244]

I am Main it, but like the budget cube i had was not like way worse than it

[@Malumcomcom]

Can’t believe a fan timer is not the most expensive😊

[@Malumcomcom]

Sorry, gan timer😅

[@gamerpig4077]

It is actually

[@AxerTheAxe]

For anyone still watching this, the JPerm RS3 M 2020 is totally worth it. Exceeded my expectations.

[@gamegadget880]

Legends always click on J Perm's videos faster than they could solve a j perm.

[@QuantumQber]

What's a jperm🙃

[@bigdoge]

@@QuantumQber ...

[@QuantumQber]

@AJ Hauter it was a joke sorry

[@andyflips1766]

I average under 40sec on a Rubiks brand speed cube so I feel like I could probably get down to a average of like 30 on a actual good speed cube

[@paarthpradhan198]

@@andyflips1766 and that's the misconception of people, good cubes can make a difference but not a way big difference. Trust me I was sub 35 myself on "Rubicks" cube then I switched to Jperm RS3M 2020 and was expecting to get sub 28 but I was getting almost same result. Unless your rubicks brand cube really really sucks, I don't think you will be able to get sub 30 on good cube WITHOUT PRACTISE. Actually I noticed for the first few days I was faster on my rubicks brand cube than on my rs3m because I wasn't used to it or basically I didn't have it's practise. So if you wanna become sub 30,practise that's it nothing else but yeah you should probably look into buying a good cube for sub 30 because it's difficult if you're not expert at cfop or other advanced techniques.

[@raycuber6153]

2:00, Who else noticed he was waving his hand 😂😂

[@tejas8008.5]

yep!

[@michael_soria]

I got my jperm moyo rs3m 2020 today. I am new to cubing and am still very slow. I have one method that takes me 2:22 minutes. But one day. Thanks for the videos. I am watching them all the time. So I can be the next max park. To bad I am 43 yrs old man that’s a cop. Haha

[@surendragautam6720]

Fact: H perm is called a H perm as you perform h perm and then upside down the cube and the perform it again you will get a H design on lateral faces:)

[@realTPerm]

@H Perm 9 LOL

[@vanisa_ray]

After learning the 3x3, the best cubes I can suggest you can learn are the 2x2, 4x4, pyraminx, skewb, and mirror cube. (And trust me, the skewb is also a piece of cake! You just need to memorize one algorithm and apply it throughout!) The really enhance your eye coordination and help you improve in cubing. 🙂

[@nasdfigol]

Also skewb teaches u a different perspective because of its silly turning, meaning you 100% will learn new finger tricks

[@Chureki]

Jperm: “There’s no such thing as a cube that’s TOO good” Meanwhile, the Gan 14: 😏

[@mewtu5817]

The gan 14 is not good

[@Chureki]

@@mewtu5817 good point

[@rocklee5090]

Casually solves a cube in 10 seconds while explaining meanwhile my cube remains unsolved for months

[@apo6664]

3:35 i use the : ruwix timer And it has all your solves , average It has 2×2, 3×3 , 4×4, 5×5, 6×6 , 7×7, pyraminx , square-1, skewb Crambles and it shows all the 6 faces scrambled 👇 if it was helpful

[@FlashyEdits555]

Just realized that I used the same timer!

[@gamingbuildingandcubing5644]

4:00 i used to use twisty timer on my tab too but if youre not aware then cs timer is also now available on phone and you can add a shortcut to home screen at which it will just be like an app and thats what i use now.

[@abelarda]

I just love how concise your videos are, I've been watching them all afternoon. No better words to describe. Exactly what I need! aaaa

[@Menezia]

0:24 bro just pulled out my cube 💀

[@selors8396]

this is so funny, this video was recommended to me right after my first speedcube came in the mail. used to use a rubiks brand that taught me how to solve the cube, but i just upgraded to a GAN and it significantly improved my time.

[@christian3145]

You're not a real speedcuber until you *won* a giveaway. yup I'm not a speedcuber

[@arnauolivemarcos5555]

Me neither

[@notmyname8443]

Insert sad cuber noise :(

[@5tuffz]

Dont be sad, you don't always need the newest cubes. Be content with what you have and the ability to cube at all!

[@christian3145]

@@5tuffz definitely! but I wouldn't mind to experience a win even with the cheapest cube out there.

[@5tuffz]

@@christian3145 items won't buy happiness 🤣 but I see where you're coming from

[@gauthamgopinath3362]

I hope this gets recommended to everyone so that many people will join the cubing community.

[@xyz_cubing]

His solves are so satistfying!

[@minerobloxer1gaming663]

0:55 Shameless plug

[@mr.flossgd2686]

i randomly stumbled upon this video in the prosses of waiting for my RS3 M 2020 to come Lol

[@mynameistperm9031]

Same, I also was waiting for my rs3m 2020 to come and stumbled upon this.🤣

[@mantic53]

5:09 THATS MY ONLY CUBE AND I WAS USING IT WHILE WATCHING THIS AND U GO “this is just some random cheap cube” CMON MAN

[@BiffHorrific]

Hi, recommendations please: I want a larger nxn that is like a 6 in difficulty and an 8 in fun (out of 10). What is better out of 5x5, 6x6, 7x7, 8x8 etc? Thank you.

[@JPerm]

For me the most fun big cubes are 5x5 followed by 6x6. Usually smaller will be more fun as you'll adapt to the turning style more quickly, and it's hard to skip a cube size.

[@TyperMarlinGames]

Definitely 5x5. 6x6 is when it gets a little bit less fun to speed solve, in my opinion.

[@vybzcubing7272]

Who recognized, that he waved his hand in the mirror of the mirror cube.

[@A590Gaming]

Time stamp?

[@benkucinich5755]

i did

[@Mangojuicelover456]

@@A590Gaming 2:00

[@magusperde365]

Never learned to solve a 3 by 3 and bought a puppet cube because youtube has showed me cubing videos for no reasons and its concering.. but your channel is nice so bought with code bla bla but see me in like 20 years when I have solved the puppet cube lol. It makes for a great toy to just randomly play with though lol. I got all the corner solved two times and had to retain myself from opening your excel file then

[@eljavi1648]

WHERE IS THE PYRAMINX TUTORIAL??????? REPLY FOR HIM TO NOTICE

[@kostasam5]

Reply

[@awexchocolate]

bro i bet at the time of this video he barely knew how to solve one himself

[@walmart211]

Yes I learned how to solve one from a very low quality video

[@tancwei7944]

ColorfulPockets *solving a cube* Judge: My legs are hurtin man’

[@المنسف]

thanks j perm my life has changed when i first got into cubing its my favorite thing to do i learned how to solve because of you 😊😅

[@shshjkl]

Im at sub 25 average at struggling as hell on learning look ahead ( i know i have a lot other things to.improve too). One of the main issues is actually focusing on looking for other parts while putting into slot (even tho i dont need to look at it). More frustrating is that i struggle with figuring out my 'progress' in it. Simetimes pairs like pop up just in front of your eyes so you dont really need to do anything special to 'look ahead', but sometimes they hide on the back etc. Hence its difficult to measure whatever i get better or simply being more lucky.

[@ishan9665]

In the description, “dio Brando” has been listed as one of his patrons

[@fruity_colal2092]

XD

[@cool_indeed]

I going to start cubing bc it sounds cool and I found facts about cubing. Fact: corner twisting is not cheating if you did it not on purpose you can corner twist it but beware most non cubers think that cheating even know I did not started yet I do know that is a fact

[@thecubingconnection]

Me: sub 25 Jperm Uploads for new cubers. My Brain: Just Shut Up and Watch it

[@SparshVaish]

I accept, this is the same case with me 😛

[@cubingnetwork2872]

Hey J Perm, I want do a video on m KZbin channel about your channel history. However, in order to do that I would need to show clips of you videos? Can I do that without you suing me for copyright?

[@JPerm]

Yup! I personally don't issue copyright notices when people use clips for their own content.

[@crift3vil731]

Hey

[@cubingnetwork2872]

@@JPerm So, is it Ok if I show a 5 minute video of clips of your videos throughout you channel history? I will give you credit.

[@ellaalan01]

1:56 he is saying "hi" to the cube. you can see in mirror blocks

[@juns5979]

9:28 *Jperm telling us how to be real cubers*

[@ShadyBut2]

But it's the last 3 second

[@ShadyBut2]

But funnier

[@JLCubing]

Hey J Perm, Cubehead Apologized to you about the Cubehead vs J Perm thing. NOW HE realized that you put a comment under that video. he made a video about it.

[@edenschannel101]

Shush

[@Geoifay]

I recently got upgraded from a Qiyi Warrior to the RS3M V5 and now I can tell how much of a difference there is from a non-magnetic and magnetic cube

[@ephraimsension]

let's be honest, who didn't start on Rubik's brand.

[@splashnoy]

me

[@JanetheFlautist]

I started on a mini cube then went to a rubiks and learned f2l on it then moved to a RS3M 2021 which is my current main

[@JonathanAufderheide-ln8pr]

@@JanetheFlautistWhy are all these replies so recent? This comment is 2 years old lol.

[@Specter05624]

Me

[@JanetheFlautist]

@@JonathanAufderheide-ln8pr idk

[@noel6187]

Have good editing skills and paid actors ;_;

[@anubhavisneha6897]

Haha yes lol

[@AnunayMintoo]

Lmaoooo

[@pk251]

uh, no. and that's for youtube and not even true

[@justprobus64]

@@pk251 he plays fortnite so he typed the wrong thing

[@noel6187]

There is always "that one kid" on a funny comment...seems like there are 2 on this one :(

[@InfinityCuberRS3M]

even though i have been cubing for a while and have all the stuff you suggest, i still love this video, its just so good

[@renjunsriceroll]

me watching this when i cant even solve a rubiks cube normally : interesting

[@ballaarnold8255]

Me watching this with a GAN 11 M pro in my hands be like: oh wow

[@jack---]

same lol, im not that good at cubing but i bought one cuz why not

[@bradyven]

My POV: I’m 9 and I have small hands and my mom won’t let me buy a $30 cube 😢

[@ummekulsumtura3716]

I recommend you the YJ ZhiLong M 3x3 Its 50 milometers and its quite cheap

[@snøwy_cl]

Just get rs3m 2020, I use it and I get sub 20

[@46221A]

@@ummekulsumtura3716its too expensive

[@46221A]

It's like 5 dollars too much

[@46221A]

My mom only gives me 1 cent per year

[@angryh9392]

I didn’t know that dust could have catastrophic effects on cubes. I was very confused on why my RS3m 2020 just started performing worse, i have only had it for about a week and it’s getting really dusty in there

[@nikobellic2869]

Clean it!

[@angryh9392]

@@nikobellic2869 yes I have, I worked wonders until it needed to be cleaned again.

[@paarthpradhan198]

@@angryh9392 store the cube in a dust free environment or best just keep it in its box when not in use, another advice I'd give is use less lube because it's fragments can get stored in there and appear to be dust. Another advice can be to disassemble the cube less because that too can affect it. And finally, clean cube once in 2 - 4 weeks. After cleaning try your experience without lube for a while because I cleaned my cube just yesterday (at first it was lubed) but now I feel like the without-lube cube seems better than the lubed one (I have RS3M 2020)

[@Plant_btw]

@@paarthpradhan198 i heard from some other comments that if you dissasemble the rs3m 2020 too much the core gets stripped

[@anayakhan7969]

Ellooooooo! Ur not gonna read this but tysm! U got me into cubing and I enjoy it SO MUCH! it’s rly interesting and fun:) I thought cubing would be boring and hard but u explain it soooo wellllll. Thanks!

[@jameschea.]

How to become speedcuber: don’t use a rubiks brand

[@nxrphoenix978]

Lol

[@5tuffz]

You can still get amazing times with them! I can almost average sub 10 with it!

[@angelicavarone8709]

I get sub 0 with It and the belt metod

[@Howhungry1234]

Angelica Varone I get sub -69 with rubik’s brand

[@skrimp9622]

*Tymon laughing

[@limeuc3526]

I just watched cubeorithms one

[@ReverseBurst]

It’s more of a joke

[@french7515]

The Moyu cube you recommended is absolutely amazing

[@dylan2.066]

I cant get lube because it is ilegal to import liquids from other countries, can anyone recommend a lubericant witch you can buy at a store that wont damage my cube

[@ibie27]

Hold up... PETROL?

[@1976kanthi]

Is it? I get lube from speedcubeshop.com and I live in India.

[@lionellthesman3060]

Hmmm try going to like an rc car store or a hobby store and find traxxas 50k or 30k or 10k if you dant find traxxas and find a notner brand its still gonna do good. example(factory team, hudy etc)

[@dylan2.066]

@@1976kanthi its only in my country that i know of

[@1976kanthi]

@@dylan2.066 oh ok

[@CubeforFun]

Now we have a big problem: 12 minutes ago 11 views 680 likes 316 comments

[@ibie27]

Supa haut fire: Sike, you cant just use Wrong Number KZbin: haha, numbers go brrrrrr

[@ezrahadwi135]

No, thats not the problem, J Perm didnt upload some stupid method for a month 😢

[@sworshplayz2840]

dude a for a view to count you have to watch a video for 30 seconds, you're very original by leaving this comment.

[@ibie27]

@@sworshplayz2840 woah, imma get my friends channels some views

[@ramyagandhi2688]

this is the best channel i have ever heard!!!

[@CubeforFun]

How to become a speedcuber: Cube instead of doing your homework.

[@md.asaf-ud-doula4132]

Or do cubing homework

[@crift3vil731]

Yes

[@crift3vil731]

@@md.asaf-ud-doula4132 maybe

[@BradCounter]

Almost first... how is everyone first.

[@CharleyCheno]

because yt doesnt verify

[@BradCounter]

@@CharleyCheno yeah I know but like I saw 5 people saying they were first.

[@CharleyCheno]

for multiple people it shows "no views or 1 view: "kzbin.info/www/bejne/pXrOmZqXnNuloKs

[@5tuffz]

Stop giving a shit about who is first. Just enjoy the vid

[@LukiTruki]

@@5tuffz tru

[@georgeevangelaras]

Usually what i do is use a qiyi timer and writing the times on a paper and typing them in to cs timer after i finish

[@Hitz_val]

I am fastest as possible but still not first😭

[@faeandtired7195]

Bought the MoYu RSM M 2020 on your recommendation! My speed cubing adventure begins proper!

[@TheAviationist1491]

My brother has the gan 14 maglev uv coated.

[@Mia-sx3bi]

Now, I‘m hoping my mum lets me by this stuff. I am really serious about making this my actual Hobby, I‘ve never spent a day without solving and parciticing the beginner method since I learned it. Wish me luck

[@jinxy6]

I started with the cube I found in a store and since your the best yt of cubing which make tutorials I solved it and it’s really bad so I got an rs3m

[@Bravenewwood]

You should promote your tutorials in the description THEY ARE THE BEST

[@iqber201]

I learned cubing from you and now I am sub 20 thank you sir

[@FlusFlus]

My average was 35 secs when I said to my mom that I wanted a better cube for Christmas instead of the rubiks brand, she was surprised cause she thought that rubiks is the best brand but its actually really bad, it may be the original but they sould make better 3x3

[@gabraelnorrisAK]

I got a QiYi speedcube box a few weeks ago, but I started with a Rubik's brand, went to YJ Yulong V2 M, and now I have a GAN 356 M.

[@AngelPlayz_II]

J Perm: Not only are OH and BLD really fun, but they're also incredibly impressive when you show other people. Yes, 'cuz solving a Rubik's Cube in under 30s isn't enough.

[@eliasujashvili7113]

You waving in the mirror made my day!

[@THEROYET]

I just became a lot more happier because my cube just got featured in your video! And it's the 4 dollar one! 🙂🔥🌚

[@coby_not_kobe]

J-Perm you should make an updated version of this video now so that they can know about the gan 12 maglev and gan 12 leap

[@Ph4ntomlol]

Quick tip there is an app that is called finger timer, which emulates a stackmat timet and is amazing for a start, it gives you random scrambles and records your Ao5