Arrma Typhon 6s Upgrades (Wider, MX28 Belted Badlands, Rpm Bumpers)

[@JoshSmith-ne2gw]

Can you drop a link for all the parts needed for this conversion???

[@Refer_jack]

Fr

[@mrtambourineman6107]

No, look 👀 it up yourself bro, you'll learn more in the long-term. If you don't know what parts they are, you probably shouldn't be installing them on your RC vehicle!

[@mrtambourineman6107]

Also, where does it end if someone is telling you what to do step by step?? You will want him to come round and hold your hand while you install them next!! 😂

[@virdi1992]

You're actually such a loser, dude. Big deal if the dude wants the exact parts....​@mrtambourineman6107

[@fiatfixie4344]

That RPM bumper is one of the best things I've put on my Kraton.

[@Hungrybird474]

I agree 👍 and a 3drc wing mount after I broke the first one . Both screws broke inside the shock tower

[@ReadySetRC]

Build came out amazing! You have no idea how many times you had me looking at another Typhon😆 Thanks for the shout out too👍 That tease got me thinking🤔

[@JasonPerrinRCVlogs]

Thank you. I’m pretty excited about this one. Widening it really changed what the typhon is. Wish I would have done it with my prior Typhon’s. Probably would have not sold them. I’ve been watching eBay for the Corally parts. But I don’t see any ads with the updated parts. Might just have to purchase off Corally’s website, or HRP.

[@Sc2greenst]

New to the hobby. Love that you're doing content like this. Helps us new guys who aren't gear heads. First RC is an outcast 4s v2. Thinking about changing out the stock hubs to HD hubs and this helped a lot. The commentary is on point, was thinking about getting a Typhon 6s for my next car and I think this video may have sealed the deal. Keep up the good content. Every time my bell is lit up I'm hoping it's one of your videos.

[@JasonPerrinRCVlogs]

☺️ Thank you.

[@savagex466-qt1io]

@@JasonPerrinRCVlogs What are CBD's ? I know what a dog bone is but I googled it and can not find anything about CBD's

[@DeejayPozE]

​@@savagex466-qt1ioCVD's man. I'm probably way late but thats what they are called!

[@urbanarborist1160]

The little RPM rear skid plate is a must keep in stock item for all the Arrma vehicles! Thank you for highlighting the fact that so many Arrma parts are interchangeable. Thanks for another great video Jason 👍

[@gihonda127]

I put the Kraton front bumper and attempted a triple jump with 6s. The bumper weight endowed and even at full throttle to push the back down, I nose dove and broke many parts, about $130 ish. I like the look you have on that one!

[@kaosr.c]

Looks brilliant mate Best thing i did to my v5 typhon was making it truggified !! It just rips and its solid

[@yonicozac]

The EXB Talion bumper is a smaller version of the Kraton bumper, suits the Typhon better

[@themajorceo]

Link???

[@1964rider]

Hi, I just bought a Typhon 2 weeks ago. My brother got me infected with rc cars. So much fun to go nuts with it. Just watched your Video. Would you mind posting the P/N‘s you used for the wheel hubs? Like what axle and such… Just to keep myself from buying the wrong stuff twice. 😅

[@FilthUD]

That looks so frickin good. I have a Kraton EXB but always wanted a Typhon. Gonna have to pick one up

[@mitsumike714]

I think I would enjoy a video of you going through all of your "mess" and organizing it

[@frederickgrassie3383]

I am really new to the Arrma stuff, very old Fox rc user. Ordering the Typhon tlr, and was wondering if you will furnish me with all the part numbers so I can ordervthe correct parts. Thank you. Wonderful videos.

[@kevingalea92]

Now that looks amazing I love everything you put on that baby

[@riccardogiorgetti4907]

Is it possible to link the upgraded parts so we can find them easily? Thank you

[@q60nyc90]

Hey can you send me a description of the parts witch KRATON also ? Thank u

[@shawnscott9704]

Can you start listing part #s for things you change? Would help a ton

[@RCRoads]

Wow man! I love you workshop. You did such a good job on the video. Your 6s Typhon is really dialed in. Thanks so much for sharing all these great mods. 👍👍

[@goingrc]

Looks awesome! Still has the buggy look with a lot more presence. 👍 The RPM bumper is a great addition. Perfect for snow bashing. Saved me many times already. I chose not to remove the stock bumper. For the new parts, lemme guess, Canada, snow... You're making a skiing Typhon next 😁

[@mikeguzmansr]

What parts do we need exactly to do this upgrade. I’m trying to source them now and I’m having a hard time finding the correct parts. All kraton exb parts? The red hex’s are kraton 17mm so we don’t have to use the adaptors for the prolines since our hex’s are 12mm? The axles I’ve found. Still unsure on the front spindles and rear hubs. Thanks 🙏

[@harald_hans]

Very cool - thank you for the video ... Can I ask for a link for tires and adapters ? I also can not find the front bumper at RPM ?

[@rcaddictgarage]

Now for the run video👍. I did something similar to one of my newest builds.

[@frederickgrassie3383]

Jason, I want to use those same tires, but what parts exactly? Kraton has a few versions, exb and v5. Could you give me part bumbers?numbers?? Thank you.

[@GreatLakesRC]

Love what your doing with your Typhon 🤩🤩

[@JasonPerrinRCVlogs]

Thanks dude. Super happy with how this is turning out.

[@danielkroeze8218]

Good luck with those belted badlands not coming unglued.

[@mikerainey3847]

Great video! Really appreciate you sharing your knowledge. Your vids are a little longer than most but packed with tips. Keep up the formst

[@mikerainey3847]

Sorry bout that! Keep up the format. I look forward to the shorts

[@austin515]

Definitely looks cleaner without the RPM bumper but I refuse to run mine without one. Has saved me so many times.

[@BeautyBeastRC]

Definitely agree! I like the kraton non exb bumper as a compromise 🤣

[@4WheelRC]

Awesome truggy:) Holy negative camber in the rear - hows tha rear react with all that going on? Love your vids - Cheers from ON

[@brianrozell1059]

What all is needed to do this conversion?

[@Hungrybird474]

Hey Jason . I was thinking of a 3s typhon since I like how the granite is . What do you think ?

[@CrazyRogue230]

quick question, why do people struggle so much with tyre ballooning? I've never used belted tyres but I've also never blown out a normal tyre and I do have 6s rigs, outcast included.

[@Hacsta]

Hi I am in the process of buying a new Traxxas Sledge. I am not going to use it for any bashing, all I want to do is set up some racing cones down at my local park and race around them. After watching this video I am thinking maybe I am better off just buying a Typoon 6S and put some bigger tyres on as you did. Do you think it would be faster and more race capable, more fun?

[@ridingtom9891]

Hello. I followed your build to do mine. But the rear outer cvd are not correct. Too short in the rear. The front worked great. What did you use for the rear outer cvd’s. Please help. Thanks.

[@crlewww30]

new to this channel and man let me say you have some sick badass RCs. new subscriber here dude

[@JasonPerrinRCVlogs]

Thanks.

[@xXB.FunkXx]

On 6s they blow off💥. Doesn't matter what glue, who glued it or what you wrapped around the inside and glued. 6s and they explode.

[@toocold1464]

Great video could you tell me which kraton hubs you used for your typhon

[@rctezluh42069]

i had so much fun with my typhon truggified today!! upvoted!

[@freeman9048]

Go v5 typhon too, my favorite for sur this buggy is awesome more than everybody can expect

[@mikeguzmansr]

Which hex adapters did you get just ones that fit any 2.8 tire?

[@ryand4786]

Great video , and left us with a cliffhanger for next week 😂

[@JasonPerrinRCVlogs]

🤣😂

[@mrtambourineman6107]

That's a beauty mate! I have the TLR 6s version, and people might think I'm mad, but I've never ran that on 6s battery power! Even on 4s the thing goes like greased lightning 🌩 TBH I think the typhon 3s is even a bit too fast for me, I use 3s power, but only at 75% throttle. More control = more fun to me 😊

[@gihonda127]

Do you have the part numbers for the bumpers, and do you know if the bumpers will fit the 3s Typhon? Good video, and I enjoy taking time watching your vids in helping me with my own RC fun.

[@NoLeakz]

Awesome Shop! Thanks

[@chrisdale2625]

I assume those tires would work on my 3s typhon as well cuz i have 17mm hex should just bolt right on i hope ?

[@urbanarborist1160]

Yes sir they will... 👍

[@wysiwygbebe]

What is the model or item number for the front bumper?

[@deanag8457]

i have that bumber on myn6s and its awesome. it really protects and i can climb trees now 😁

[@mrtambourineman6107]

Can you bash with the typhon with the new better tyres?

[@michaeldmarshalljr7080]

Could you post the part numbers that I need to do this mod! Thanks really like it,want to upgrade mine!

[@djfacebones8621]

I see that hpi racing sticker

[@tonysmith7989]

Since widening it. Try the Mojave Dboot fortress tires. Great grip raises it a little, more soft landings and you will never lawn dart as the tires with little effort will pull the front up. I run mine with them some times and had to trim the shirt of the body jus before the rear wheels, enough not to really notice, and I still have fun without widening yet. Check out Rich duperbash Typhon on Dboot fortress tires. Not to many have tried and the ones who have are saying it's a new beast. I'm now doing speed runs with the Typhon.

[@ethansalus5688]

Part number for skid plate and bumper??

[@jessewilliamson2408]

That front dogbone should fit on your typhon . the typhon outcast and kraton all have the same front center dogbone

[@jaysonrovers]

Hi, Parts list numbers? As a few have asked I see in the comments section.

[@rcarty419]

Omf my parts make they look organized lol!!! Loving my 3s typhon. Whet paddle tires your running?

[@Acornejo02]

Are the Kraton parts from exb or regular 6s? Idk if it'd make a difference 😅 I'm fairly new to this

[@cafub2650]

Hubs from Kraton 4s

[@MrSrtman18]

@@cafub2650i wonder will,the kraton hubs work on a 3s typhon?

[@FAKE-NAME]

Are you in Canada? If yes where do you order arrma rcs and parts from? Arrma site wouldnt let me buy anything just usa sales only. I ask if your in canada because of your comment at beginning of video.

[@lowblueranger]

Which wheel hubs are you running, narrow or wide 17mm?

[@WilliamJames-h4l]

Kraton hubs, from and rear.

[@WilliamJames-h4l]

And hexes

[@iamme2522]

Looks fantastic

[@shuster1921]

That thing looks Sweet!!😍

[@maximeWIP]

where to get the wil

[@Dos_Rc]

Nice 👍, I have the same arrma pit Mat in my shop

[@BeautyBeastRC]

I was kind of disappointed with how easily my mx28 non belted came unglued on 4s. You've made me want the Belted ones now though 🤣

[@JasonPerrinRCVlogs]

Hopefully they hold up. It’ll be a few months before I can really start running them. I still have a few months of winter left.

[@russr]

helpful for dirt track racing?

[@WilliamJames-h4l]

Definitely not.

[@mrtambourineman6107]

Where are all the otjer Typhon vids bro??

[@ethanlagrone7322]

Hmmm might be on your way to constructing the ultimate rc car making almost all your others obsolete?

[@JasonPerrinRCVlogs]

Funny you say that. A part of me wants to sell a some of my cars, and focus more on just a few. The Typhon is going to be a blast.

[@JustKeepLivingFPV]

Would it be cheaper to buy all the parts for a rc from Jenny's rc and build it myself? 🤔

[@cafub2650]

Nope

[@JustKeepLivingFPV]

@Cafu B needed this 3 weeks ago lol the trucks built. It was a blast. I have put direct hopups on. Spent a ton of money.

[@cafub2650]

@@JustKeepLivingFPV lol Sorry about that.

[@kennetcastillo7740]

if you add up the cost you quickly realize it's cheaper to just buy a new rtr

[@edwinlomonacofoolsend]

Would have been nice to have a parts list in the description.

[@DSC1320]

You definitely aren't the first. I've had this setup for 3 years. And posted on the arrma forums

[@dirtbike9003]

A Jenny’s team corally 6s combo?

[@gerardosoler8935]

Very nice 🤘

[@WilliamJames-h4l]

To much traction, it will tear up diffs, diff cups, axles, if you get the non belted badlands, when it pulls a wheelie , which it will, they will ballon as big as saucer plates, I’ve already seen what these tires will do to a typhoon 6s. Tires are to heavy.

[@johngallo7383]

DAMNIT MAN!!!! IM TRYING NOT TO SPEND MORE MONEY ON MY TYPHON!!! Now I gotta get the Kraton hubs and Prolines for my Typhon cause that just looks AWESOME!. You suck...Thanks for the vid.... grr. 😁😂👍 I got the bumper from RPM and the Skid plate. They Are nice touches.

[@JasonPerrinRCVlogs]

No problem. 😜

[@Mikey1962]

Nice build, I want to add a bumper to my Typhon 6s,that background music is pure torture on the ears, way too much of it over and over again. I hit the mute button but then miss when you start talking. Perhaps change out the background music/noise every now and then so its not so annoying, boom click boom click over and over.

[@angelpaul4824]

Not the music dude come on talk its cool brother good job peace dude have fun

[@angelpaul4824]

Build talk while build its not that hard

[@lestercunningham6497]

You talk a little to much, i get it if your actually working on something but you just sit there and talk, ehh sry not for me