JRL 2020c how to install the new updated top housing

[@oscardelatorre4542]

My clipper just broke same issue now i need to order part. Thanks for video will be helpful in fixing mine.

[@barberlouie_2112]

Yeah message them they should send it for free if it’s the old version

[@christopheralexisalvarezbo6517]

Where shall I message thems as I live in the uk? Thanks

[@barberlouie_2112]

I’m in the US i don’t know if that’s ok with u

[@rocfl59]

Fast to the point, good vid !!!

[@barberlouie_2112]

I appreciate that bro 🙏🏻

[@C.chillx3]

This video helped a lot appreciate you

[@barberlouie_2112]

I’m glad my video help u out brotha

[@MobileProBarber]

Hey what’s up man thank you for this video it was very helpful! Did the same exact thing to mine. But the cutting blade is giving me trouble it’s moving up and down a little bit. you have any problem with yours?

[@barberlouie_2112]

Yea I think that problem has to do with the lever they a lil play room like if it gets loose over time

[@CarlosSandoval-fp5bz]

Hi, I wanted to ask you where I can get that part, it's because the one for my jrl machine was damaged and I haven't found it where they sell it

[@barberlouie_2112]

JRL website sells them

[@christianderamirez2748]

I’ve had the housing replaced on two clippers and they broke for a second time.

[@barberlouie_2112]

The new updated housing?

[@jonathantatis]

how can I get that I have the same problem but I have no way of how to buy because I don't see it for sale on the page

[@barberlouie_2112]

Message them on instagram and tell them

[@Rezamajedi]

It sounds still loud after you replace the cam follower

[@barberlouie_2112]

Threw camera clippers always sound loud than in person

[@geliooblendz3369]

I did it bro but my lever stopped clicking how do I fix

[@Mike-hy8cs]

Does the spring snap in place with new housing? I was having trouble putting mine in

[@barberlouie_2112]

Mine didn’t snap it place

[@najeebrasheed8438]

After taking screw out the back to put new updated piece in. The new updated part is not going in flush like your showing. How did u get it in flush like tht

[@barberlouie_2112]

I leave the screws loose and once I make it flush I screw it tight

[@franciscomikael403]

I can't loosen the blade screw because it's too tight, any tips?

[@barberlouie_2112]

Which screws?

[@franciscomikael403]

@@barberlouie_2112 the ones holding the cutting blade, the two biggest. the one on the right doesn't come out and I'm already afraid of ruining it.

[@barberlouie_2112]

I use a small power drill to take mine off

[@franciscomikael403]

I will try, thank you. congratulations on the work

[@barberlouie_2112]

Thank u I appreciate that 🙏🏻

[@joseduran7862]

can anyone advise me on how or where I can get these replacement parts?

[@barberlouie_2112]

You have to message JRL on Instagram

[@gilbertosauceda7614]

Donde puedo comprar esa pieza para mi jrl

[@barberlouie_2112]

Manda le mensaje a jrl en instagram

[@gilbertosauceda7614]

Me podrias ayudar con el link o como y como se llama la pieza

[@barberlouie_2112]

@@gilbertosauceda7614 instagram.com/jrlusa?igshid=YmMyMTA2M2Y=

[@gilbertosauceda7614]

Muchas gracias buenas noches

[@susanoestevez4058]

where do i have to buy it

[@barberlouie_2112]

You message JRL on instagram

[@igor10carioca]

Hi bro, where can i buy this update?

[@barberlouie_2112]

Just message JRL on IG and tell them u want the new updated top housing for the jrl 2020c and they will ask for your order number

[@ethanmcphie6417]

You didnt show how the blade goes on

[@Dominicreviews]

In your opinion, which clipper is the most quiet?

[@barberlouie_2112]

JRL I haven’t had a clipper that has been quieter than jrl I’ve never own a pair of gamma clippers but I know ppl that say there not quieter then JRL

[@Mike-hy8cs]

@@barberlouie_2112 jrl is definitely the quietest. The gamma mythic and ergo are pretty quiet also but they are definitely a little louder. Even the jrl 2020 trimmers are real quiet. Great for kids. I have 2 1 zero gapped and the other backed off to use on small kids that move.

[@Dominicreviews]

@@barberlouie_2112 I purchased the JRL2020C. First ones were garbage build quality. Got a replacement and so far so good

[@barberlouie_2112]

Yeah the updated the housing on the jrls the first gen were braking fast

[@Dominicreviews]

@@barberlouie_2112 My gripe is that I can't zero gap the clipper. Once I do, it makes the Wahl guards rattle. Which is annoying as I like to use my clipper to remove the bald line. I hear that the gamma fusion blade fits in it?

[@jonathantatis]

Please

[@jonathantatis]

Hey

[@barberlouie_2112]

Hello

[@franciscomikael403]

I can't loosen the screw because it's too tight, any tips?

[@michaelserrano8339]

Go to the gym 😂