Just a small comment about the bubbles on your radiator. Loosen the radiator cap to equalize the air pressure. Try that technique on another crack if it should happen again and I bet you there won't be any bubbles. UNLESS ... It's kind of the same effect as holding spray paint can 3 inches away from what you're trying to paint( bad idea)because you're going to get runs/bubbles👍 So hold can farther away from radiator so the spray doesn't bulk up so readily. And for heaven's Sake clean that surface extremely well beforehand. Okay so I guess it was more than comment LOL. Thanks for the tip and using your car as a guinea pig so I didn't have to 😎
@3o5maniak2 жыл бұрын
You have to spray various coats. You spray once, then again, then again till you build a nice thick seal. Do not over spray or you will cause water drops or bubbles.
@miguelperaza66153 жыл бұрын
Don't be afraid to shake can for 5 whole minutes ! Then it will work ! 💪
@lovetrump10887 ай бұрын
This product will never stand up to the pressure and heat over time. This Flex Seal product is "not" intended for pressurized systems or heat applications like a Car Radiator. Because it says for Leaks...does not mean it works on a Pressurized Water cooling system.
@snodgrassgerald23525 ай бұрын
yeah i have a tiny pin hole on the the top plastic connector hose. i'm use JB water weld
@joecox99583 ай бұрын
that's what I think also
@DebSant8944 Жыл бұрын
Directions say to shake can WELL B4 USE! No offense, but 1-2 quick shakes was likely why didn't dispense correctly. Awesome idea for fixing the pos Apple cords that ALWAYS break on EVERYBODY! Tyvm for the radiator video. Husband needs new radiator & I thought about seeing FlexSeal ad on tv & told him to try it but he's still lol at me! Beats spending $100+ labor!
@chur15032 жыл бұрын
Start your car and see if it still leaks from beginning to the end ?
@joecox99583 ай бұрын
not only temp there is a pressure, so I doubt whether it works. hopefully there is update or other can also confirm it
@jsmith3964 Жыл бұрын
Fiberglass layer pad and seal 4 times still holding
@joecox99583 ай бұрын
OK thanks for JRobling's update: Flex Seal doesn't work!
@ChrisHarbison Жыл бұрын
FLEX SEAL DOES NOT WORK ! TRIED IT TWICE ON SAME RADIATOR.
@upnorthvlogs2 жыл бұрын
How did it work on the radiator thinking about using it on the Polaris ATV
@JRobling2 жыл бұрын
My follow up video explains it does not work. It gets too hot and makes the flex seal too soft
@norman71797 ай бұрын
@@JRobling I suspected that !
@1994CPK3 жыл бұрын
How's it holding up after 3 months?
@JRobling3 жыл бұрын
Watch my follow up video
@yanaaj58223 жыл бұрын
Man I don’t see no follow up video just tell me what it is
@JRobling3 жыл бұрын
kzbin.info/www/bejne/Y4vdZ5mop6uBrLc
@jeffreyb6165 Жыл бұрын
I have seen a couple of cases over the years where a radiator was leaking at the crimped seam where the plastic connects to the radiator and it was just a matter of re-crimping the aluminum tabs to tighten everything up. Of course I've never been that lucky.
@mahrez5244 Жыл бұрын
My man thank you for sharing this
@briandalton60772 жыл бұрын
Hey I have same thing going on with my cavalier so the next your car was fixed with that you use they please let me know if did your next then I will buy me somes of that
@anthonymendoza59543 жыл бұрын
That's what she said
@indubitably4243 жыл бұрын
Jb weld!!!
@gc-cabaldoleonaldjhonpaulc7313 Жыл бұрын
Won't work. Once you put it back the leak will come back because of the pressure.
@Sneeezzyy3 жыл бұрын
Shake the can bruh
@cpt.j9751 Жыл бұрын
Yeah, it was pissing me off.
@JorgeReyes-lj8db10 ай бұрын
A gonna try it
@alanterenceshaw2691Ай бұрын
Great!
@sotheamam12442 жыл бұрын
Hi..im cheap too
@timothythomas2685 Жыл бұрын
Bad idea
@MondayMotorvation4 жыл бұрын
Hmmm
@nathanwesley64223 жыл бұрын
Hot air intake lol
@timothythomas2685 Жыл бұрын
I was wondering how he figures that hot air is better than cold or cool air?.. Dense air mixes better with fuel than hot air
@mightypyro31727 ай бұрын
You sound like Ryan Reynolds
@alarmr12692 күн бұрын
Keep radiators new. Don't repair them. They can blow up in your face without warning. kzbin.infoNGF5Achm32Q?feature=share