JRW - How to set distributor timing on 3.0 Dodge 6g72/Rambling/Hooning a 5 speed swapped Caravan

  Рет қаралды 3,388

Jerry Rigged Wrenching

Jerry Rigged Wrenching

Күн бұрын

In this video I loosely explain how to set the timing on a 6g72 aka 3.0L powered Dodge. Then, I go on to rant about my 5 speed swapped Dodge Grand Caravan and do a 0-90 pull. The important info is in the beginning, and if you have any questions please ask and I’ll do my best to answer them.

Пікірлер: 14
@Mortimusmoose
@Mortimusmoose 3 жыл бұрын
This guy is one of my heros now!
@Jessesquarebodytube
@Jessesquarebodytube 2 жыл бұрын
Thanks so much!! I have a 93 spirit with that engine and I can use all the info I can get!!
@Jessesquarebodytube
@Jessesquarebodytube 2 жыл бұрын
That exaust sounds bad ass!!
@invujerry
@invujerry Жыл бұрын
@@Jessesquarebodytube I just saw your comments here and on my Vanna video lol, glad to be of help!
@InventPeace1
@InventPeace1 2 жыл бұрын
Good video thanks. Yeah the timing by ear method is (as I recollect), to turn the distr until it speeds up, then bring it back down gradually to just the point where it begins to slow down; it will run fairly good that way), of course timing light is best but as this video's author states some things run better at 16 deg rather than 12, the 12 may be to meet emissions standards ?
@invujerry
@invujerry 2 жыл бұрын
Probably for emissions and it’s a safer compromise than having to run 93 octane at altitude to prevent knocking. As far as I know, this engine doesn’t have a knock sensor.
@Danny-ow7hl
@Danny-ow7hl 2 жыл бұрын
I put a m90 supercharger on mine. Had to put her at 25° timing to get her to run great.
@alextheromanian
@alextheromanian 2 жыл бұрын
I messed up and forgot to mark the rotors orientation while replacing the distributor, wires and plugs. I managed to drop it in in a position where it starts up right but it idles slightly too rough for my liking. Rougher than before. I’m fairly certain its in the right position but I’ve never messed with degrees or anything. What do you suggest?
@invujerry
@invujerry 2 жыл бұрын
I’d unplug the coolant temp sensor, and get it started, maybe with a friend to help rev it for you. Start twisting it, one way it will idle lower, the other higher. Once it will idle on its own, turn it off, plug the temp sensor back in, and go for a drive. You can get it close “by ear”. I ended up at about 16 degrees of timing by ear which the van runs great even on 87 gas.
@garage79r
@garage79r 3 жыл бұрын
Wouldnt be so loud if you let me put a damn turbo on it ;)
@invujerry
@invujerry 3 жыл бұрын
Turbo going on is easy. Fuel system is the hard part 😂
@crushed2543
@crushed2543 Жыл бұрын
I want a walk through of this and I also wanna five speed a lebaron
@crushed2543
@crushed2543 Жыл бұрын
Because I don't understand does the spinning of the cap twist or the whole thing
@invujerry
@invujerry Жыл бұрын
@@crushed2543 there’s a lock bolt. When you loosen that, it allows the base under the cap to twist.
Motor Chrysler 3.0 V6 Distribución Change timing belt.
20:00
Carlos Parra Cortés
Рет қаралды 135 М.
When A Gang Leader Confronted Muhammad Ali
11:43
Boxing After Dark
Рет қаралды 8 МЛН
Violet Beauregarde Doll🫐
00:58
PIRANKA
Рет қаралды 48 МЛН
He bought this so I can drive too🥹😭 #tiktok #elsarca
00:22
Elsa Arca
Рет қаралды 44 МЛН
Oh No! My Doll Fell In The Dirt🤧💩
00:17
ToolTastic
Рет қаралды 13 МЛН
王子原来是假正经#艾莎
00:39
在逃的公主
Рет қаралды 25 МЛН
How Ignition Timing Works: Vacuum and Mechanical Advance Explained!
6:18
MSD Performance Ignition
Рет қаралды 341 М.
Mitsubishi 6G72 V6 Timing Belt Delica L400 Pajero Montero
23:15
Project Addiction
Рет қаралды 12 М.
WHY DO THEY KEEP MULTIPLYING??!
18:04
wonderful world
Рет қаралды 218 М.
BMW E28 Restoration Part 5 Body restoration and finishing
1:37:28
How To Replace Timing Belt Part 1 95-97 Dodge Intrepid
16:31
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 97 М.
1993 PLYMOUTH Voyager 2WD
0:18
YAC Auctions
Рет қаралды 1,1 М.
Violet Beauregarde Doll🫐
00:58
PIRANKA
Рет қаралды 48 МЛН