Jtag Tutorials #27 How to fix a Bad/Corrupt Nand Flash

[@88tontos]

Smartest thing I have ever taught myself how to install QSB's to my rgh's. Saved me countless hours with nand corruption.

[@ireapertv4483]

I corrupted my nand following your video to update to latest dashboard. Good job. Thanks

[@Isaacganz]

His guides are outdated, I unfortunately bricked my own system today following his guide as well. I'd recommend following Mr. Mario for a safe way to update/install rgh

[@robbwinter8564]

Any way to fix the nand if you have no dumps whatsoever just the CPU key?

[@illililililillli]

Reply if you need help still

[@seb-m]

i need help with something like this

[@AjitBhattAV]

Hey. I have my CPU Key but not a backup of my NAND. Any Help?

[@AllureisDED]

can u help me my console will boot into xell then it will black screen and i will get all the white letters and codes. but then it will say " trying to make sense of uda, lets assume its fat" then nothing else happens :/

[@AllureisDED]

+Im Simples never mind i fixed that. but now it turns on but i dont have a screen it just shows "no signal" on my tv screen. any suggestions?

[@hockeyrr1238]

do you know how to fix it?

[@azyn4158]

Have you fixed it I got the same problem?

[@azyn4158]

How did you fix it???????!?!!?!?!?

[@asmircar1]

what if you dont have backed up nand ? because i dont have it....

[@TubeUser705]

same here i have e79

[@modzpop]

Seamus Ritson then your fucked lol you have to send it to someone to fix it with soldering shit in and getting the nand info

[@JusDevin]

Modz pop WHO?!?!?!i got same problem

[@spicyspaghetti5009]

yeah seriously HELP!!!

[@TubeUser705]

i did and flashed a donor nand to it

[@Need4beans22]

you boy... you don't know how i love you... you saved my rgh so many times with your tutorials thank you so much

[@jakejordan38]

I patched my dvd drive to devkit.. i figured it would spoof my region, anyways i try to boot my rgh up in xell or even with the power button ive tried EVERYTHING any help?

[@TheKillaaahGaming]

my xell loads but the thing is that i cant get my cpu key through there never i think its becuase of my hhd but it does not extract the file or anything or do anything it just stays the same

[@unknown-wp2co]

My rgh says no signal on my tv when it turn it on and it won't even boot the xell or Xbox logo when I turn it on

[@adowtv7672]

unknown same For me

[@VZVelocity2hi]

Means that your console is bricked

[@zexiffy7792]

unknown bricked

[@VZVelocity2hi]

Itz Swagy whats wrong with it

[@babyboybae5636]

@@VZVelocity2hi is there any fix to it? Or is it irreversible?

[@oXxDarkShadowxX]

I deleted my bootanim.xex, so it won't boot into Dashboard. But I can still boot into Xell. And I don't have a back up of my orginal nand. Please help.

[@nathanhodges9273]

Shady did you ever fix it?

[@ollisterr9551]

Ok i have fucked up big time! So i bought a RGH when i got no expreience at all and the first thing i do is update the dash like you do on a retail... yeah i know i fucked up big! But then i got help i learnd about Xell and we tried flashing it with Xell... Failed so i bought a matrix nand flasher of ebay for €3 and i cant get it to work cant boot up Xell and i forgot to save cd key and that shit! :( Please Help! I got a Phat Xbox 360 with a RGH 2.0

[@MODDEDWARFARE]

When you bought the RGH the seller should of given you a CD with the CPU Key and original nand dumps on it. You can use them to build a new freeboot image using XeBuild GUI then flash it to the console using a JR-Programmer or Nand-X. The console should be already exploited so there should be no need to install another glitch chip on there.

[@ollisterr9551]

eh... I bought it off a website like ebay and he wasn´t the first owner and he didn´t know anything about it. So i dont know what to do! :(

[@franksfusionnutition9540]

Custom buy a new one

[@antton235]

So my friend has Slim with rgh and he updated it years ago and just gave it to me. I have no cd key or anything and the console wont go to dash or xell so is there anything i mean anything i can do to fix this ? I live in Finland there are no modders here i know who could fix it.. so if i can learn to do something and again anything i will do it my self

[@illililililillli]

Perseen Reikä Poliisi Message @XBLNoob on instagram

[@lifesloretalks]

I load into xell, I have all the files. Xell just does it's normal thing, and stops at "EHCI bus 0 device 1: vendor 4B25 product 7A00 : Mass-Storage Device." I'm not sure what to do! I just bought this usb, and it worked the first time, but I didn't have the necessary files, so I had to redo it, but not it wont go past that last line.

[@benutzerize]

Idk i got a Corona RGHv2 4GB I think i flash my nand bad. My Xbox just got a Red dot on the Power led If i use Rawflash like the tut my xbox shut off after executing anyone could help me out? Sorry for my english im from germany :P

[@sunrise9108]

hey guys, im getting a E71 error and i know why... because i downloaded a corrupt xbdm.xex file to run neighborhood and the xbdm.xex was corrupted which caused my console to give E71 error i can boot in normally once i remove my hard drive.. but of course.. i cant do anything without a had drive... anyone know how to fix it???

[@illililililillli]

Hey, still need help? I make RGHs, just reply

[@AFLAMSTORYTIME]

i dont have dvd drive how i eject this dvd to fix this nand corupt

[@jordan5165]

i have the exact same issue

[@TheXxashcfcxxable]

I flashed my nand normally and everything and when i went on xell it started doing something to the updflash or whatever and i powered off half way through and when i power up the fan goes really low. Xell doesnt boot but the rgh falcon itself does. I have a backup but i wanna know how to make xell work. Please help

[@SumAlot1]

right my xell freezes half way through its boot up thing ???

[@ipilllsv8891]

after i got this to work the first time i tried updating my rgh again and the same thing happened. also when i tried using rawflash again to reflash my nand through xell it didn't work it just stays at the screen saying waiting for controller etc. need help!!!

[@ToXiCMODZ47]

i have a squirt 360 chip and i have a programming cable out the back what could i use to program my nand?

[@Moxhification]

Anyone got a Rawflash v4 download?

[@CODYRIOT]

www.logic-sunrise.com/forums/files/file/4577-rawflash-v4/

[@jerbilourimi358]

My RGHed xbox360 slim seems to boot only after 3 or 4 hours cycle. Im not sure what s causing this, however when it boots I get like 5 to 6 boots within 15 seconds. Could this method solve the issue ?

[@pranshuchaturvedi3041]

xXModdedWarfareXx when i put usb in xbox and start with eject button........ blue screen of xell does come but it says that nand features not allowed or somewhat like that....... please help thank you

[@chinmehh]

hello Master. I tried to update my jtag corona slim 16mb nand x360 and got a bad flash for some reason which I am not really quite sure of. i got an E 79 error and looked up to this tut. My console is actually still able to boot into xell. So I Dled raw flash and I still have my original dumped nand. I followed all the steps, got all the files on the root of a Fat 32 2GB usb stick. then I booted x360 to xell, plugged in the USB, then it read it. But unfortunately, after that word executing something, instead of showing a whole black BG and those numbers, my screen just blacked out showing nothing, and that's it. I presume after the execution, the process was just terminated. Im so confused why. What could be the problem. please help :(

[@natemaane3653]

VERY IMPORTANT GUYS! LISTEN UP! YOU DONT NEED TO WATCH THIS GUYS WHOLE VIDEO ALL I DID WAS USED A blanklaunch.ini, put it on a usb, plug into xbox 360 and boot up. put launch.ini in root of stick. that is what you need. just go in. transfer new ini over and re setup plugins. then take out usb. and next time you turn off xbox 360 and boot it up, it should work.

[@atlasmods3735]

I can't even dump my nand. It says "SFCX Unsupported type B-0". Do you know how I could possibly fix this and/or what is causing the problem?

[@lamdra8262]

hey @MODDED WARFARE, ive got a question about my jtag, my jtag seems to be not booting or turning on at all not even the xbox logo appears, just asking do you know what the problem may be?

[@Moeke050]

5:05 My xell stops loading at : fat Mount uda0. It happened before the corrupt nand tho. So is it possible for me to use it through xell?

[@FuZaHGB]

Xell is quite awkward sometimes. Mine doesn't work if i have a wifi dongle plugged in or if theres more than one attatchment plugged into the console.

[@Moeke050]

+VideoCubes | FuZaH well i figured it out after a long time. I have a flased driver attached. I unpluged it and it worked. But is very anoying to open up my xbox all the time >

[@FuZaHGB]

Wessel Van Der Wiel Yeah, that sucks :(

[@luisalbertoarenasaraya4579]

My Xell Reloaded boots but it says TFTP Package send error . Any idea what that means, why that happens and solutions ? Thanks beforehand

[@nickferrara2120]

I flashed a kv with flash 360 it finished then when I went to restart xbox it wouldn't restart. Went into xell and tried to flash backup and it didn't work. Now I can't boot into xell. Will this tutorial fix it?

[@Cameron051296]

I cant even open up j runner i keep getting an error saying jrunner.exe will only be compressed after closing the application using it, and cant extract jrunner.exe? Help please.

[@xStayCurious]

Xell doesn't load anything past, "EHCI bus 1 device 1: " etc. It just loads to that and then stops. I have both the nand (renamed) and the files on the root of the hard drive and still nothing. Does the drive HAVE to be formated as fat? Mine will only format as NTFS, though I have the option to format it as exFat windows always gives me errors when I try to. Anyone have any thoughts?

[@ethanyeethan7617]

I haven't got a corrupted nand, I just don't have a backup that has boot animation.xex on it so what do I do?

[@itsvengeance8204]

I'm sorry I know this video is old but I'm currently struggling with finding raw flashV4 but I can't find it anywhere? please help f possible

[@kaidenharrietha]

Hey guys i just fixed i was having the same problem of most of you. HERE IS THE FIX. My situation was a bad nand flash, I reflash my backup, put the updflash. bin on usb stick with only that on it. Boot up Xell and it will flash to that. I turned off my xbox after it finished, unplug power cord then plug back in and update was installed! Make sure to unplug usb before booting up your xbox! hope this helps

[@GamerScottYT]

Yo know its an old video but im just wondering if this is what i need to fix the issue im having where i cant delete data or save data on my xbox or if i need to find a diffrent video

[@luisalbertoarenasaraya4579]

Is Xell Reloaded related to activating DLC and have games? Sorry if that ? is dumb but IDK why my XB360 doesn't read my USB game but Aurora still works

[@blockbusteryo]

You make the most detailed Jtag tutorials on youtube, you should have a lot more subscribers than you do keep it up mate. Also do you have a TTG account by any chance?

[@itzsparky]

i have a corona v2 RGH and my xell wont read my usb. so how can i fix my bad nand flash.please help Also it stops at fat mount uda0.On the the xell Reloaded. does anyone have any idea what do

[@mattsimpson1190]

Please help, what do I search in google to find the cord I need to buy and plug in the coloured ports?

[@OCAVTYS]

I only get the error when I update to the dash (16756). I can go to 16747 and it works just fine. But, when I update to 16756 I get the e72 error.

[@GamerCorbett]

hello moddedwarfare, i have a RGH2 Tinity Slim i Enabled somthing in dashlaunch follow your tutorial on how to setup like once i restarted the console i relised my rgh wouldn't boot. and tryed xell and that wouldnt boot either. I looked up and it sayed u have to reflash nand with a Jr Programmer so im following this tutorial and i get a error 'Flash Config: 0x00000000' What is the problem? Thanks Jay

[@Staylejk]

Hello, so i broke my consol with an update with xebuild 17489, i follow the tuto xell, but when he load the flashnand.bin nothing happen ( Corona 4gb, Rgh 2.0 ) please HELP ME :'(

[@LanaNader2007]

plz help my dvd key shows ???????? when I go to xell and now all game played from disc xbox says it's movie

[@ironmetalmodder5699]

Xell on my RGH is stuck at Fat mount. Wont go beyond that and tried 2 USBs. Both have been Fat32 format.

[@minemodderdalton558]

Hey Sir, I tried to flash my kv to my nand using flash 360 and all it says is SFC_iNit Failure: 0x00000003. Please help dude I really wanna go online!

[@xLuckyModz]

what if you couldn't get the backup?

[@llRandomPersonlll]

+xLuckyFX™ | Modder and Designer your fucked m8

[@c2l27]

Hey @xXModdedWarfareXx....I have my flashmp.bin and also cpu key but my rgh doesnot open at all even when pressing eject botton..I need help please help me

[@HypedHDx]

ok xell works and I don't have access to my backup because the hard drive on my pc crashed and I had to system reset the whole pc would I still be able to fix my falcon rgh?

[@riblue8967]

When Xell goes to run Rawflash v4 my monitor comes up with "No Signal"

[@survivor1566]

Did u ever find a fix?

[@survivor1566]

Ever find a fix?

[@survivor1566]

@zFields i fixed it a while back, not too sure how but ik i fixed it thx anyways tho

[@anthonylavielle3973]

I put something on my dashluanch as plugins now it won't boot up with power but I can go thrue sell menu but is gets stucks as Looking for files on local media and tftp does that mean I have to reflash the nand

[@nickferrara2120]

Little late but just put a blank flash.ini file on USB stick and boot it regular with power button

[@koukilfs]

does the dash kernel you backed up on matter?

[@bradfordnelson1252]

You might want to add a note over this: I was copying stuff from usb to hdd (homebrew and application folders)...using xexmenu and didn't realize that I pasted xell into the root of my internal hdd. It would finally boot/glitch after like 8 hrs then wouldn't for like another 8 hrs. I started combing the internet looking for answers. My chip is an acev3 for xbox 360 e corona 4gb. I had read if it's solid red light with no flashing green on the chip it could be the xgcpu getting ready to rrod. Ok this matched with symptoms because my case fan took out and rrod. I swore though as soon as I caught it I had read enough about rrod and shut it down unplugged it and ordered a fan w/led fan mod. Got it and still problems didn't dissappear. I began researching error codes. Other than the first failed fan/rrod, I had no error codes. Like other users on several forums, I could remove the hdd and it would boot. I cleared the content/cache folders...same thing...removed plugins from dashlaunch...same thing...I took my 360 apart began troubleshooting sata cables, power, led fan mod....finally flashed my nand...I did learn how to successfully flash it! But to the same problem...last time I got it to boot I decided to backup my hdd to 3 Tb usb...formatted the hdd...and HOLY SMOKES IT BOOTED GLITCHED...POWER OFF...BOOT/GLITCH ×5 ...as I was going through my USB:\HDD1 BACKUP\ folder I realized I had xell in the root of my hdd. 12/12 boot/glich under 2 minutes each time! I am betting half the user post I read did the same thing!

[@bradfordnelson1252]

All it would do is give a black screen with no green light on the chip. I had read if it doesn't boot/glitch in 5 mins it wont. If you have used xell you know it can take way longer than 5 mins to load...so people push the power button....it will keep doing the same thing with xell in the root of hdd1 with no error codes and no blinking light on modchip...or controller and nothing but a black screen until you remove xell from root!

[@bradfordnelson1252]

I had even used xell to try and flash my nand with rawflashv4 in the usb pendrive with xell (the entire time the prob was xell in my hdd1 root)...I wound up using jrunner to build my dumped nand and simple 360 nandflasher to reflash it.

[@bradfordnelson1252]

Ok should we help other users? If we don't the modchip/repair buisnesses might make money but if you spent $400.00 on a rgh and it had these problems would you be recomending rgh/jtag to friends? It's giving the chips/buisnesses a bad rap...perhaps something in the xell readme.txt too!

[@5300trilla]

Bradford Nelson *ok so how do you reflash your nand bro?*

[@HastyRhombus760]

It might be a good idea to make an updated video to include RGH3. Love the work please keep helping the rest of us!!! Plus all of the tool links are dead at this point. I cannot find Rawflash V4 anywhere to download.

[@user-dt4qi5qm1p]

When adding the Stealth Ninja files, I forgot to reflash and rebuild my nand. Now all I'm getting is a message saying system will continue to reboot until I reflash. How am I supposed to reflash my nand, if I can't access Neighborhood, Xex Menu, Or anything else?

[@DeezNuts-jh1hh]

+Dylan FuckOff I had that problem how come you acces xex munu

[@connor12568]

+Dylan FuckOff You need to launch without plugins, you can use a USB with a launch.ini without plugins and put it into console. Or turn it on via power button then press eject button, it usually works after 10 tries. If you need more help just reply.

[@ExVaporr]

xXModdedWarfareXx I can get on xell but I don't have a backd up nand or the dvd help please?

[@thefallen0891]

i accidentally deleted my flashdmp.bin is there a fix for that? without taking apart of my rgh

[@jonahp5589]

I turn on my Xbox and it's black screen but boots into xell... I did the flash raw with original named and it always stops after listing the devices and ends and mass - store below ff :Xbox controller.. Don't understand. What's your email I'll pay you if you help me fix it

[@xmxsmodzzmason5115]

I don't get anything i have a RGH falcon chip one someone sold me a bad kv so now i need to send it back bc i can't solder well i can but i don't want to burn my motherboard

[@VrhoAirlines]

Hello! I think i damadged my nand... i forgot to put coolrunner back to normal mode :P how can i check if it is damadged? The console boots and it shows rrod :(

[@ttgben5786]

Yo, I get an E71 Error, and when i do the xell method, my usd stick dosnt reconise the RAW FLASH, I have my default nandflash.bin but it wont search for it. It happneed when i put on xbdm.xex for Dashlaunch. HELP ME plz, Ill give you 2 KV'S

[@camsince5191]

if i did this do i have to remove the chip before flashing ????

[@flairr3547]

where can you buy the jrunner programmer v2 kit

[@mickytm6010]

what wire do you use to connect your jr programmer v2 to your PC?

[@kjtrwarhead]

what happens if we turn the xbox off as its trying to write the new blocks? Because xell wont even load.

[@R07ishere]

If you don't have xell then you need to manually flash it with the jr programmer.

[@kjtrwarhead]

Can I have xell reloaded on a stock nand image?

[@AcHr4f360]

I had a e71 error and my 250 gb hdd got screwed after updating the dashboard to 16747 and I had to replace it with my external hdd .

[@lukeferreira3812]

I got my RGH done and it is constantly freezing and takes for ever to get to the loading screen, I don't have a back up of the nand what can I do?

[@5300trilla]

MyWolfMods CheifWolf *how you use a donor nand and make a new one bro?*

[@jrzwee5493]

Xell boots but i dont have a back up of my nand, can someone help me where to get annad

[@huzaifaamin3064]

Wait so the games that were on the xbox will they still be there

[@jrzwee5493]

Okay i found my nand backup and installed it and it said shut down now so i did, left it for 2 minutes and now it wont power on at all

[@lohantoy2428]

hey I can launch into xell but it stops at * trying to make sence of uda, let's assume it's fat any ideas how to fix this? please help

[@DoitDavo]

I HAVE THE SAME PROBLEM RIGHT NOW any idea how to fix it?

[@matinator2267]

I flashed my backup to my console through rawflash, but every time I boot up the console, I get a error 71 message. Help please?

[@matinator2267]

Nevermind. I flashed it again for the 7th time and it finally worked.

[@SullyCortez]

Need help.. my console is bricked. Will not run xell, or read the hard drive, or boot up into stock nand since i have a dual nand system. 2010 320gb Xb Slim trinity mobo RGH 2. When i went to restart the system after flashing the nand it just forever sits there and doesnt actually turn on......

[@2012tunchi]

Sully Cortez i have the same issue

[@SuperLiamb123]

We need help badly help us!

[@2012tunchi]

he explains how to fix it in the video

[@SullyCortez]

akeem thoams its not quite the same exact issue..... and i tried just about any and all methods

[@luiskaba3246]

any solution for xbox 360 header is wrong with trying to read nand

[@andreascharalambous6589]

Hello, will the same tutorial work on nand of xbox one? I have the e100 error which can be fixed by fixing the nand.

[@SuperLiamb123]

Andreas Charalambous only rgh or jtag 360s

[@my11stur]

Hi! I want to flash the JTAG to the newest dashboard. But when i go to dump the raw to file it says some error. Can i continiue to update or not? It says * rawdump v1 started (by Swizzy) game:/flashdmp.bin opened OK attempting to read 0x1080000 bytes from flash... I SFCX: Bad block found at 0xA1 block 0xA1 seems bad, status 0x350 NAND Dumped! :D Completed after 13 seconds Pres any key to exit! Is here something wrong or can i continiue?

[@splashwc274]

i don't have a backuped nand....What do i do?!?!

[@dontdie_yt2644]

got my xenon here semi bricked i guess turns on but doesnt boot i dont have a nand i am able to solder it and do whatever it also never booted xell

[@Brando-n3t]

What do I do if I don't have that backup

[@rayanouldsadsaoud2843]

Hi man if i do this tutorial,can i update my dashbord(i see the tutorial of dashbord but when i try to dump the naud with the programe they say there is a problemme) Rgh2.0 corona V2

[@ojbj1]

Corona v2 and v4 weren't the best for stuff

[@rayanouldsadsaoud2843]

yeah....

[@xmxsmodzzmason5115]

My rgh doesn't have a small usb where do i find it

[@daniellelumakeky5482]

Can I do this method on Xbox360 Slim Corona 4GB? Recently I did something wrong and now can only boot to Xell.

[@wearnur9972]

Yes, it works with all consoles.

[@tdtoast1527]

my xex menu won't install correctly!!! help I have a rgh and it powers on but I can't install the xex menu because it is saying its currupt

[@connor12568]

+XeCute Voltage If it says it's corrupt then I'm afraid you don't have an RGH lol.

[@connor12568]

What video?

[@connor12568]

I see the "help please" one. You're using the wrong version on that video, it's 1.2 not 1.1

[@connor12568]

The console you show.. Just because it has LED's doesn't mean it's a JTAG. I really think you don't have one.

[@p3o0]

my xbox 360E been have red death error E79 Can you help me plz

[@lBubblezl]

Hey moddedwarfare, I flashed what I'm assuming is a bad KV and now I get nothing when I try to boot my RGH2 (I believe). The coolrunner rev c chip is always red and blinks green once then that's it. I can get into Xell but it always gets stuck at the part with TFTP servers. I don't know what I need to do to fix it, so I thought you might and would be able to help me out? *EDIT* Nevermind, just did this first thing in the vid (swear I did it at least 5 times before) but either way, it worked.

[@anthonylavielle3973]

I have the same problem how do I fix it

[@Roug3e_Bunny]

wonder if this will fix my guide freezing my console...

[@imintense8935]

Is it possible to fix a bricked console?

[@nickmeskhi9147]

My working backup file has bad blocks and doesn't flash anymore , how bout that

[@ItzMrFuzzy]

i cant boot into xell :( please help

[@kenan3500]

so I need j-r programmer v2? or a nand x?

[@reaper57abvbg]

tubzg - backup channel It doesn't matter. Both will work just fine.

[@mikethorbjornsen7501]

is the updflash the same thing

[@XeXEclipseFTW]

I flashed it with the usb and it still came up with error after

[@michaelmuniz1410]

I lost my nand will this still work

[@DWMXenonx]

Raw FLash Link is broken

[@fuckingcutyourwristsandble2245]

I have no idea how to get a new nand i have no back up but i can go to xell

[@SuperLiamb123]

Can someone help my rgh wont boot up at all it wont go to dash or xell and the inside light is just red and wont change help please

[@SuperLiamb123]

SuperLiamb123 | Stream with me! and I lost my backup I just recently dumped my nand is there a way to get it back?

[@Moeke050]

I have the samething. Do you know how to solfe it ? Pls tell me. Thx

[@SuperLiamb123]

Mine just turned on today I dont know what I did its working fine now Just give it about 1 month its what I did

[@Moeke050]

SuperLiamb123 | Stream with me! Well i have figured it out. Next time open up your console and unplug the driver. just pull out the cable is enough !

[@SuperLiamb123]

ya I unplugged it and took out the hdd then put it back in and I guess that did the trick

[@mcallihan100]

i updated my xbox with the retail nand.. so it acts like a retail now, but it seems like it has liveblock

[@illililililillli]

MCGaming Is it a banned retail nand?

[@sankalpdash4774]

How can I contact u personally.. plz I need help..

[@user-lb9kv3xq2y]

I have a Corona v6 rgh 2.0 i brick my nand because I wanted to update to kernel 17502. What tool do I need to buy? Ps: cell don't work, I need to open up my xbox 360 E

[@user-lb9kv3xq2y]

+cory Andrews problems?!

[@fiscvault6857]

i think you have to open it and write it back

[@user-lb9kv3xq2y]

+RGH/JTAG kid done this, she is back in live :)

[@princenaveed8131]

I've got the same problem Don't have any idea what to do

[@fiscvault6857]

take it to the weeknd modder(search him up on youtube)or take it to eazieRGHcustoms

[@jukemods607]

it sais tring to make sense of uda lets assume its fat can you please help

[@OrdinarySimonTheJoe]

Is it ok if xell dose not load

[@ahmadsebbah1369]

Hey great vid, what's the the name of the intro song?