I have a JTE-15 and it works like a charm I bought it two years ago and it have never had any issues. Feed works perfect haven’t had a jam. Recommend 100%
@christianperalta77816 ай бұрын
Love the channel guys. I just got a JTE-15 and would love to see a how to disassemble/re-assemble and cleaning video for the JTE-15. Thanks in advance.
@Glockfairy4 жыл бұрын
My JTE-15 in sniper grey is currently being held in DROS jail, day 12 and counting. Can’t wait to have it in hand
@vladimirlacroix60737 ай бұрын
I've had my JT-15 for 3 years now. After initial hiccups that may have been my fault (I disassembled & didn't reassemble buffer pin correctly, didn't lube up first range trip) it's been smooth sailing. The like to run "wet". I initially missed having a bolt catch, but kinda got over it. Just keep them lubed & file corner of mag followers, smooth shooting over 4k rounds later.
@mikewhite84903 жыл бұрын
I have went out shooting mine twice and so far I haven't had the problems discussed here and mine has run flawlessly so far. It would be a real disappointment if I do run into those problems, keeping fingers crossed
@killerashtray13962 жыл бұрын
How is it after three months?
@mikewhite84902 жыл бұрын
@@killerashtray1396 Still running fine, will take it out in a few weeks to run a couple hundred round of 5.56 through it
@lrballistics2 жыл бұрын
@@mikewhite8490 Any issues six months later?
@yomangfoo14 жыл бұрын
had my JT-E 15 for over a year now and 2 thousands rounds in its ran flawless. My only gripe is the trigger guard edges are alittle sharp on bottom and cut into your middle finger and cause quite a bit of discomfort if you guys can round out those edges then it would be perfect and more comfortable. overall im happy!
@andrewroman49824 жыл бұрын
I haven't noticed that on mine yet, I'll try to look out for it next time i take it out.
@acemacc91994 жыл бұрын
So true!! i'm thinking of putting some sort of rubber or thin foam padding around the edges of it
@andrewroman49824 жыл бұрын
@@acemacc9199 after putting a few thousand rounds through mine, I see what he means. I found that just wearing some Mechanix gloves works pretty good to ease the discomfort.
@liquid73153 жыл бұрын
Yeah, same here, no big deal though. maybe I'll just let that part of finger build up callus , or like others suggest, wear gloves. Lol.
@JohnHilman19684 жыл бұрын
I'll just stay in NH and keep all of my AR's in Liberty (live free or die) mode.
@tylerrogers31562 жыл бұрын
The JTE has been rumored to no longer be legal in California based off of the featureless design… can you clear this up for me? I want to buy the JTE - 15 but I also do want to spend all that money just to get it taken away and then I’m out $1,500. Can you please clear this up for me?
@VCBP-4152 жыл бұрын
Whos gonna take it away?
@kylethegamingfile90652 жыл бұрын
Leave California
@ericu93972 жыл бұрын
@@kylethegamingfile9065 yeah no doubt. They take away your freedoms and people stay. Just don't come to Texas if you all are going to keep voting these idiots in office.
@ayoforyayo17212 жыл бұрын
I think they banned a different rifle that was considered not a rifle or handgun
@alexvargas3602 Жыл бұрын
I literally just bought one yesterday
@marlonnaidoo53024 жыл бұрын
Thank you for a great build. I just received my JTE model. What r the specs Flash Hider 1/2 or 5/8
@bobrodriguez54154 жыл бұрын
What's up with the differences in cleaning between Juggernaut Tactical JTE and the differences between JT-15 rifle.
@geo7803 жыл бұрын
None same milspec. The only thing that really matters is the barrel and BCG to clean.
@xxlinkman456xx4 жыл бұрын
I just ordered a JT-15. Does it come with the hellfighter pin installed from the factory?
@liquid73153 жыл бұрын
Indeed.
@11b4x64 жыл бұрын
Do all JT-15's built by JT have the flag embroidered on them?
@enriqueavalos4 жыл бұрын
what type of buffer does it have ?
@ulisessalas64204 жыл бұрын
Do you guys sell the kits for ambi bolt release? I bought one of your upper /lower receiver combo a couple of years ago and It set up for ambi controls but I don’t know what kits are compatible with your lower receiver.
@jons_collectibles_133 жыл бұрын
Just got a lower at my local store and purchased the upper on your website, I noticed you don’t sell any others parts?
@oFFthEwAll324 жыл бұрын
Does the jte 15 accept 233 or just 556?
@shotgunshell804 жыл бұрын
Stay away these guns are trash. I bought 3 then after receiving my first I canceled my other two orders. Selling the one I bought..
@bbingtube4 жыл бұрын
@@shotgunshell80 why?
@liquid73153 жыл бұрын
Both.
@buddyrebel_Garcia Жыл бұрын
@@shotgunshell80what about the lower receiver?
@HKX_ORANGECHICKEN2 жыл бұрын
Where can I see the new rifle? Been hearing about it from the Scholar
@recoil75132 жыл бұрын
Turners
@bbingtube4 жыл бұрын
Why does the JTE retain bolt release and the JT does not? Does that disadvantage the JT 15? How do you lock it back or release it?
@liquid73154 жыл бұрын
Good question. It was confusing me when shooting mine. I believe it is because of the hellfighter kit along with the magazine lock, another step delaying you from reloading quickly. After the last shot, the bolt stays ; At that point the hellfighter Pin will not work and you won't be able to crack open the action, a step needed for you to be able to release Mag. (P.s. after typing comment, I grabbed unloaded rifle with bolt already foward, Having an empty mag in , I can Push pin to crack, and release mag and put mag back in and close. If I first charge handle ,the bolt stays back , the gun does crack open but you cannot release mag with bolt back, you have to release it.) After last shot, you have to push the bolt release button (located on left side of gun, bottom part of button can be used to push it down after you charge handle, that will lock it back , the upper part of same button releases )once released , you will be able to push in the hellfighter pin, push that as it will crack open the action and thus allowing you to release Magazine. Reload a magazine , close the action , Then you charge the handle and it will be ready to shoot again... I wanna say that after putting in a new mag and charging the handle, I had to push the bolt release again, then it would shoot..
@bbingtube4 жыл бұрын
@@liquid7315 I figured out that JTE has Hogue Freedom Fighter kit and retains bolt release hardware, the JT 15 does not because the ambi bolt release is where the Hogue kit would bore. The mag lock on a JT 15 is different mechanism that replaces the ping pong paddle and linkage pin. So the ambi br is not operational nor is the paddle on left side.
@mikea3273 жыл бұрын
@@bbingtube so which one do u perfer after more knowing all of that?
@bbingtube3 жыл бұрын
@@mikea327 I like the option to reset to normal. My bro got the other one we love them both tbh... Might have gone JTE after knowing this all...
@joshpeters1563 жыл бұрын
@@bbingtube so could you put an armaglock and kingpin on the jt15 and retain everything? Bolt hold back etc
@Cacowninja2 жыл бұрын
Are you going to release that AR-15 with the lower trigger?
@Rob.on.a.carphone4 жыл бұрын
Is the JT-15 flash not legal for my JTE-15? Just bought one yesterday from Turners btw,
@andrewroman49824 жыл бұрын
"i bought it at Turner's" That's my excuse and i'm sticking to it, let the lawyers handle it while i enjoy some freedom. (just keep your reciept for it nearby lol)
@ravenmoonbow22624 жыл бұрын
Its legal
@WEST559SIDE4 жыл бұрын
Is there a option for featureless? I have standard size mags and want to use your featureless grip
@andrewroman49824 жыл бұрын
I have the featureless, the grip is one of the best (featureless grips) on the market IMO. Thordsen stock may be comparable but i've never seen one in the wild so i can't say for sure or not.
@MatthewBorg-o3zАй бұрын
208 Feeney Tunnel
@jaypilot63744 жыл бұрын
Can i use ambi mag release for jte15?
@carolinacerrato67672 жыл бұрын
Some segments in the video are stamped not adjacent to each other
@danielto30604 жыл бұрын
I got hellfighter pin. Where can I get the hogue freedom ?
@danielto30604 жыл бұрын
My bolt doesn’t lock back ? Is there a Piece I’m missing ? Or can I purchase something to make the bolt lock back with the existing juggernaut hellfighter pin ?
@WilliamJones-e7sАй бұрын
287 McDermott Throughway
@marlonnaidoo53024 жыл бұрын
Does any know diameter A2 flash hider 1/2 or 5/8
@SteveStew14 жыл бұрын
Is the jt better then the jte ?
@JuggernautTactical4 жыл бұрын
kzbin.info/www/bejne/eKDFaZt8qMeVoLc
@devilsdarlings51023 жыл бұрын
How are these rifles anybody have issues or anything? Just purchased my jte15 and want to see your options
@geo7803 жыл бұрын
My friend had a rought start when he purchase his JTE. It kept jamming and not working properly. Little cleaning and oil worked like a charm. But if you have a double feed, it is a hastle to clear because of the mag lock.
@devilsdarlings51023 жыл бұрын
Geo this rifles SUCKS I had a jamming issue and a trigger issue it wouldn’t reset it was pointless taking it to the range the only good thing I got out of this rifle was that it forced me to buy another one and I got a Daniel defense DDM4V7 and it’s my go to never buy a juggernaut
@geo7803 жыл бұрын
@@devilsdarlings5102 That sucks bro. My friend looks pretty pleased so far with his rifle...🤷 The no reset trigger issues is not that hard to fix. You just need to take the trigger assembly out and ligh sand it. Its a burr on the trigger thats preventing the reset. Daniel Defense is top of the line congrats on your new rifle.
@devilsdarlings51023 жыл бұрын
Geo it had a gas issue the trigger wouldn’t reset properly and the pins that hold the whole trigger assembly were always coming out or loose to where the whole trigger would be all out of position and I bought the rifle new it was just a pain I took it to get fixed but I never take it to the range anymore it’s not reliable good for your buddy but if u ask me I would never buy another rifle from them
@InfinitiV353 жыл бұрын
I’ve had mine for a couple years now and love it, I didn’t get any if the issues you’re describing. I just keep it clean and she cycles like a dream!
@highsecurityagent87782 жыл бұрын
Is it legal in NJ?
@s3ntin3l602 жыл бұрын
Probably not.
@highsecurityagent87782 жыл бұрын
@@s3ntin3l60 Thank you for responding.
@agathahailey6496Ай бұрын
54762 Lowe Trail
@behnam277811 ай бұрын
Ca is a joke lol
@QrtuiPkhfdyo-i2vАй бұрын
Roberts Station
@JohnReynolds-n6e26 күн бұрын
898 Aletha Green
@joshpeters1563 жыл бұрын
Can I put an AR mag lock on the jt15?
@TheBasedFarmer2 жыл бұрын
With some modifications to the maglock, yes you can. I have one on mine. You have to thin out the maglock on the back side so it doesn't run into the ambi bolt release before it's fully depressed.
@Lov3Hertz4 жыл бұрын
These poeple are scammers.. they have my money and won’t send part to my ffl and they claim they never got the ffl copy from 3 people
@falconeye5774 жыл бұрын
WOW, that is NOT California Compliant The Pistol Grip is NOT LEGAL in California
@98mvlice4 жыл бұрын
Pistol grip is indeed CA legal IF the rifle features the new CA compliant mag lock system which is what all non-featureless juggernauts sold in California have. Do some homework
@andrewroman49824 жыл бұрын
@@98mvlice boom, educated.
@liquid73153 жыл бұрын
@@98mvlice yup, you can also have a verticle grip , flash hider and adjustable stock.