JUICY DRIPPING LEMONS| Shrink Plastic & Resin

#Shrinkplastic #jdiction ＃プラ板
Hey Everyone! Welcome back and happy 2022!. Let's make some juicy lemons with shrink plastic and resin! Super easy and beginner friendly project! Make all kinds of citrus accessories by varying the colors! I hope you try it out!
Helpful video: Shrink plastic 101: • Shrink Plastic for Beg...
Affiliate links are marked with ✦. If you use my affiliate links, I get a small commission to help support my channel at no cost to you.
✦JDiction UV resin: jdiction.onlin...
10%off coupon code: AMYMADE
✦Shrink plastic amzn.to/3Hj3abs (I sand it myself using 320 grit paper)
✦Posa: amzn.to/3od622p
✦Alcohol marker: samzn.to/3GfrppR
✦Soft pastels: amzn.to/3HhNHbQ
Buy me a cup of "resin" to help me support this channel: ko-fi.com/amymade
Instagram: @emii.alchemii
Tiktok: @amymadee
[e-mail]
My Shop: www.emiialchem...
IMPORTANT NOTICE: Please ALWAYS use resin with proper precautions including wearing proper PPEs (glove, mask, respirator etc) AND working in a well ventilated space. I recommend getting a hold of the SDS (Safety Data Sheet) info that every resin company has available to the public (by law). This has all the info about the resin you are using including the precautions you need to take and first aid care. Watch my resin safety video for more info: • RESIN SAFETY | Importa...
Music: Epidemic Sound
www.epidemicso...

[@readintoit917]

Once again you do things in such a unique way! I watch your videos and think, "Yep, she Amy-ed that Thang!" You are now an action word in my mind.

[@AmyMade]

🤣

[@ahngele28]

I love how meticulous and careful you are when you're creating. That's why everything turns out perfectly!!!

[@QueenAltaria]

The lime colored marker you added to show the lemon juice packs inside is... *chefs kiss*

[@cherrycordiaI]

Too cute. I have lots of shrink film lying around and I bet my sister would like a pair of these to remind her of the approaching spring.

[@iekika79]

Aww I love these!! I love anything lemon!! They turned out sooo cute!! ❤️🍋

[@josie8896]

Great video! Love the drip idea, they're so realistic!

[@diabanyncarrasquilloescale741]

This is so beautiful!! You are truly inspiring!💜

[@melissazimmerman4208]

This one is my favorite of yours so far 😍

[@lindatoews5265]

Just so impressed by you and your willingness to share, your awesome

[@AmyMade]

Thank you so much?🥰

[@dowarnette]

Really cute with the drip.

[@chitowntexan]

So realistic & pretty 😍

[@MileyonDisney]

Awesome! They look so DELICIOUS!

[@lazycat26]

Wow awesome. really like it.. 🍋💛✨

[@kellyjean4981]

I love how you used a variety of colouring mediums. Do you like the us resin you used? I have the same brand but haven’t used it yet. The last brand I used had a very strong odor. I always love to watch your videos!

[@AmyMade]

Thank you! So far, I like the resin. Low viscosity and low odor resin compared to other brands

[@iwantmy_sk844]

Wow!...the juice!💦 (👏😊) . . .Amazingly simple, but AMAZING nonetheless! You go, girl!

[@elzamiller]

Thanks Amy I really enjoyed. Sonny in Kentucky

[@demiwithers]

So satisfying and lovely to watch,, i love your craft videos they taught me how to use resin :]

[@mirinconcitofelizclaudiaco9146]

Wow beautiful

[@jiajia6872]

Hi Amy,I am your fans and love to watch your video, I saw your shrink plastic videos and find you used different sealer in different work. wondering ‘how do I choice the sealer ?’ 🤔 (recommended brands, function etc.) Really want to know, thank you for ur help!

[@AmyMade]

Any sealer that works with plastic should be good!

[@potathoe1170]

These are so cute! Yum!

[@Frouza21]

this is an amazing work!

[@rashemechester9035]

Super cool 👍🏾

[@BexEtcArt]

❤❤❤ I used to use shrink plastic years ago but I used lucky squirrel brand but it’s gone bust. Can you recommend one that doesn’t warp the image when shrunk? Ty xx

[@AmyMade]

I use Grafix shrink pladtic

[@siddharthlal4183]

It looks so cute and beautiful! I love it and I'm going to try this!! What is that thing you used in the cure part?

[@AmyMade]

Thank you! I used uv resin

[@Kyttii]

This was so cooool

[@giovannaluisalima4397]

So cute

[@carolstewart1704]

Hi Miss Amy!! I love all of your videos and rly appreciate that u out so much time and work into helping us by making and posting them🥰 I was wondering if u could help me 😅 I made some shrink pieces recently for bits for a shaker.. um first I wanted to ask bc I have the sanded side kind also.. do u recommend using the outline/marker on slick side then flip for coloring in... The. What side do u bake upwards? 🤔 And then.. I'm hoping it was just cruddy weather but I spray sealed both sides before allowing to dry and then added uv resin but they still started to pull off 😭 I'll probably try with mod podge nxt round but was rly hoping the spray would work for me 😓 I used... "Rust-Oleum universal advanced formula clear durable topcoat high gloss" holy cow what a long name 😅 tysm whether u can help with this or not!! 🥰😘

[@AmyMade]

Hi! If you’re using permanent marker, it’s better to do it on the shiny side so the ink won’t bleed through the fine scratches. If you’re using paint marker as an outline, you can do it on the sanded side. However it really depends on the look you’re going for. Outlining and coloring on the different sides will give the piece a 3d effect. Regarding your sealer, Make sure it has dried completely and make sure the resin has cured completely. Also, with the sealer, light coats is always better than a couple thick coats

[@carolstewart1704]

Ur awesome!! TYSM! I just got my first set of POSCA pens! I rly like the both sides coloring look and I'm thinking I must've sprayed too much or the weather inhibited it's drying more than I thought! 😅 So wonderful of u to help me!! 💗💕

[@lalameans4376]

Hi 👋 love ur work...do u put resin in both side? 🤔 tks 😇

[@Pom88pom]

Amazing

[@JPSkyeBlue]

Super cute! Does the UV resin yellow over time?

[@mbg7966]

Ssooooooo cute❤️❤️

[@Odolwa2]

do you find that resin tends not to bubble in the way that mod podge DM bubbles? with DM, it appears smooth and clean going on (literally no visible bubbles), but when it dries, there's tiny little dimples here and there which are apparent as tiny tiny bubbles on the surface. also with DM, it never ever EVER covers the edges of my shrinks, it always has this unfinished edge.

[@andreaciaternasrobles]

Hola cuanto mide al inicio ?porfavor 🤗

[@thefun1711]

Will mod podge acrylic sealer work?

[@AmyMade]

Never tried that one. Always good idea to test it yourself on a small sample before using it on your project

[@johnendordevilla5155]

hello, your videos are really helpful, i just have a question tho w/ regards to the sealer used before applying the resin. is glossy clear good? or just the flat/matte one? thank you

[@AmyMade]

Thank you. It really doesn’t matter which finish to use 😆

[@johnendordevilla5155]

@@AmyMade i see so as long as i apply clear spray , putting resin will definitely stick right? thank you so much

[@AmyMade]

It would stick better.

[@johnendordevilla5155]

thank you very much! :)

[@emopulluza3602]

Quick question: what kind of varnishing spray did you use?

[@AmyMade]

I use ones that claim to bond to plastic.

[@emopulluza3602]

@@AmyMade Thank you so much! 🙏

[@Mikabellaa]

What did you use to add the shimmer?

[@qtgrlhl]

Hello! Could you share the title/artist of the song in this video?

[@rebekahrhodes9512]

Do you need the light to help cure them or can they air dry?

[@AmyMade]

This one is uv resin so you need the curing light

[@rebekahrhodes9512]

@@AmyMade have you tried resin that doesn't use UV? Are they not as good for the shrink plastic?

[@gingergurko594]

What UV lamp and flashlights do you use?

[@AmyMade]

I use a 6w nail lamp and a uv torch

[@user-eb5uz5qx3g]

@AmyMade what size would you say your lemon print out is?

[@AmyMade]

I didn’t print them. I drew them. I believe they were about 1.5 inch

[@user-eb5uz5qx3g]

@@AmyMade I was referencing the black and white lemon print, that you put the frosted shrink plastic over top of before drawing with color. I tried ( am still getting used to ) the grafix white for inkjet, it's pretty interesting. I have some random brand of frosted and like you say it's not very nice bc of how they sand at the factory. It also doesn't go through the cameo very well at all. Would you say grafix brand is a good choice for cutting machines?

[@AmyMade]

Oh ok. Yea the image was 1.5 inch. To cut with a machine, you’ll have better result with a new blade. The problem with random brand is that the thickness of the plastic may vary. I just got one and it was thicker than what Im used to and my machine didn’t cut it as well. Grafix is alright although the last batch I purchased weren’t as clear.

[@gingergurko594]

What sealer do you use?

[@AmyMade]

I used an acrylic sealer spray. Brand: Tamiya

[@lindatoews5265]

Just so impressed by you and your willingness to share, your awesome