Juki DDL 8700 Table, Motor & Sewing Machine Assembly

Bob puts together the Juki DDL 8700 Table, Motor & Sewing machine assembly. If you worried about putting this set up together there is no need Bob takes you step by step in putting this remarkable system together.
This machine was purchased here:
www.ebay.com/itm/125937389340...
/ jangranny
/ janetteb59
Facebook: / janette.bradham

[@Shawn-oh6ul]

I'm pretty handy, but this assembly would've been impossible without this video, thank you!!

[@justthegoodbits1]

Glad we could help. Thank you

[@rociostasi6654]

Thank you for doing this. I just started putting it together and your video has been incredibly helpful. I contacted Juki as far as directions go and have yet to hear from them. I have a degree in fashion design and the sewing machines we used were these. They are incredible and probably the best I’ve ever used. I guess they know that.😂

[@justthegoodbits1]

We are happy this video helped you out. Thank you and good luck with your fashion career.

[@bizzlesnach]

This just saved me from going crazy.

[@juliefranck8510]

Bob you are so kind to take the time to put this out! I got a Juki 5550 for Christmas and we are getting a lot of help with this video on the 8700. I wish I could bake you a pie as a reward! Blessings to you!!

[@justthegoodbits1]

Wish you could bake me a pie too:) Glad we could help, blessing to you also.

[@iheartbridalcouture5989]

Thank you so much for taking the time to make this video. I couldn't see the manual I downloaded on my phone!! I was going to see if someone could print it out for me! But I took a chance a kind soul had made a video!! God Bless you two!!

[@justthegoodbits1]

Thank You for your sweet comment. We are very happy to have helped you. This is the reason we made this video. God Bless you too.

[@DasiaRoseCollection]

Omg thank you I just set up my juki 8100 using this video all the other videos was too fast, confusing etc I was watching your video and another video as I go and realized yours was the best . I'm sew excited

[@justthegoodbits1]

You are welcome, glad we could help. Thank you for your comment.

[@JimBeshears]

Thanks I just put my wife's machine together and needed a little reference help.

[@justthegoodbits1]

Your welcome.

[@rondaschafer7780]

Thank you so much!! You saved me a day of frustration!!!! I have watched several videos and yours is by far the best one!!

[@justthegoodbits1]

Thank you.

[@krishoward9448]

Great video. It helped my husband get my new Juki and table out together.

[@WordofGod-lz5oj]

Thank you so much and this video so much help for my own new swein machine for fixing.🎉️🎉️🎉️🎉️

[@pattime2laugh599]

Thank you for making the video. It answered a lot of questions pre-problem.

[@justthegoodbits1]

You are welcome.

[@KellzFox]

Thank you so much for this video! I would have never been able to put together my wife’s JUKIE DDL-8100e and table if it wasn’t for your video! AWESOME JOB!! Peace and blessings.

[@justthegoodbits1]

We are happy we could help. Thank you and peace and blessings to you too.

[@Joseywales414]

You folks did this video very nice & have helped so many people. Actually I watched this video before buying this sewing machine for my wife actually the 8700H. Life would be hard for me with out you doing what you did. Your really good with instructions. Thank You , Thank You, Thank You ,,,,,,,, I will look for your quality videos . Your good people , it talke time and patience to do this. - John, WV.

[@justthegoodbits1]

Thank you so much. It's true it took 8 hours to record this video and 4-6 hours to edit. It is nice someone acknowledges our efforts. Thank you for your comment.

[@brownsugarcoffee1]

I’m so excited I get my Valsew ddl-9000 Direct drive automatic next week. Thank you so much for this it really helps❤️😍🥰

[@thebrofessor8810]

Thank you. Watching you do it was spot on, but the tone of your voice to me makes your video perfect.

[@justthegoodbits1]

Your comment is the nicest comment we have ever received. Thank you

[@thebrofessor8810]

@@justthegoodbits1 You're welcome. After the video I ordered mine. I'm a retired Tailor and need a hobby and those putt-putt machines was taking all the joy out of sewing. Thanks again and stay safe.

[@jennyperson3217]

Thank God I found your video! I've been putting my 1181n together & never would've figured it out with Gold Star Tools video, lol. And there isn't a single instruction manual. Hope to get it completed tomorrow so I can try it out.

[@alyssaradcliff2317]

Thank you so much for posting this video. I got the Juki 5550N, which is nearly identical. This was so helpful!

[@PatsyClevenger0308]

I can't thank you enough for doing this video. I just got my machine yesterday and was shocked that it came with no assembly instructions. The table and motor were assembled but not the machine. Thank you thank you thank you!

[@ginadigiovanni1584]

Thank you so much!! I got these three boxes and I’m terrified of putting everything together! You made it look doable!

[@justthegoodbits1]

Thank you. It was easier than it looked just because there are no directions to follow and now you have this video to use as a guide. let us know how it goes. If you have questions just ask and we will try to help! Bob and Jan

[@beedhai]

Thank you so much for making this tutorial! It was very helpful, so detailed step by step and well done. You are a great teacher! We can’t thank you enough! Aloha from Hawaii 😊🤙🏼🌺

[@magdalenaVSdarkness]

Thank you so much for this video ! My JUKI came in 2 parts and your video helped a lot to finish assembling the machine ❤️

[@courtneyblock6795]

Thank you for doing such a detailed demonstration. This really helped

[@justthegoodbits1]

Thank you for letting us know it helped that is what we set out to do.

[@hablemosdefoto]

Thank you for the Video Sr. this help me a lot. now my wife is super happy with her new Sewing Machine

[@justthegoodbits1]

Jesus Santos, You are very welcome, I’m glad the video helped you out. My wife is also super happy with her sewing machine.

[@joaniefischer3941]

Great instructional video took me from start to finish. My sewing "room" is detached from my house, and I don't have internet in it. Took a few trips back and forth to cover every required step, (and a few to the detached garage for tools, as well), but I "got 'er done! Thanks so much!

[@raba2d723]

why didn't you just download the video using a youtube video downloader, and watch it on a laptop as you are assembling

[@keionnalee]

Thank you I been having trouble trying to figure things out! This is the only English video I could find 😭😭😭😍😍😍😍👍👍👍

[@jennyperson3217]

Right? How is that possible?

[@productstylistmarie6391]

Awesome tutorial!! I had to separate my machine from the table to take it home, so I didn’t have to worry about the technical parts. This was easy to follow! Thanks!!

[@justthegoodbits1]

Thank you

[@hoggpublishing4640]

Thanks Bob! Super good vid!

[@Cyrilmc222004]

Thank you so much ☺️ very helpful and useful.

[@cheryllemon9440]

You're a blessing! I have this machine, table, and motor on the way and will arrive soon. I wasn't aware of the measuring and drilling for screw holes, etc. Thank you so much for sharing your knowledge through this video. It's greatly appreciated!

[@justthegoodbits1]

Sheryl Lemon, Thank you for your comment. We too were unaware of the measuring and drilling for screw holes, etc:)

[@phyllismiller8097]

Same here, i didnt know i had to drill holes either

[@tadzlahle4839]

Thank you for this video, it helped me a lot.

[@wessamsaifeldin6715]

Thank you, it was really helpful ❤️

[@karenjenkins3431]

THANK YOU for your video!! It was such a huge help along with other mini videos I had to watch for things not shown in your video. Not having instructions with my machine I was able to put my machine together by myself with your help. THANK YOU!

[@justthegoodbits1]

So happy this video has helped you.

[@sulaiha2747]

Thanks a lot I enjoyed it and I loved it

[@genevieverubera6421]

Thank you so much for the video. It made it so much easier to put together my machine. I liked how you show the screws and where to drill and how to adjust all the settings. I Still have an extra piece that is pretty big, but I'll call the company about that one. Thanks again.

[@justthegoodbits1]

Thank you for your comment. If you can post pictures to our just the good bits facebook page we may be able to tell you where your extra part goes. facebook.com/justthegoodbits

[@anandgupta6650]

Very very thank you for this guide method

[@amrutharacha573]

Thank you so much!! This is the best installation video I found in the you tube, thanks for a detailed one.It made my job easy. The best part is your clear narration :)

[@justthegoodbits1]

Thank You

[@BuddhiniKanchanaEkanayake]

Thank you very much. This is a huge help.

[@Satwamassive]

Very helpful, thank you!

[@timw1962]

Thanks a ton for this!

[@justthegoodbits1]

You are welcome.

[@whocared..1128]

Great job, it does help me a lot . Thanks 🙏

[@Freyodic]

This video helped me so much .

[@philhuang3195]

literally saves me! Such a good video and guid!!

[@justthegoodbits1]

Thank you for your nice comment, we are glad we could help.

[@allegrasargent1513]

best video!!! instructions that came with the machine were useless...though I got a different table so had to find a different video for that. The knee foot lift portion was missing had to pause video just at the right time to see how it was done.

[@jhammond4344]

Good job!

[@justthegoodbits1]

J, Thank you

[@chhummeth]

Good job.

[@capesidesewing]

Thank you so much for this very informative video. Greatly appreciate it!!!!!!!

[@justthegoodbits1]

You are so welcome!

[@fantakanneh493]

Thanks I just learned something new here

[@soniaodize8853]

Thank u so much!!!

[@EdgarYac]

Thank you. You are the best.

[@justthegoodbits1]

Edgar Yac, thank you!

[@wessamsaifeldin6715]

Really thank you, thank you, thank you 💙💜❤️

[@doramedeiros2048]

Very grateful for this video, I purchased a 1181 and everything is the same except the turn wheel, which I found on another video, I was dreading putting this together, but with you video I can’t wait for it to come in now.

[@justthegoodbits1]

Glad you have found this video helpful. Thank you, for your comment.

[@juliamartin4141]

I’m expecting my 1181 soon. Can you link the other video for the turn wheel?

[@doramedeiros2048]

Julia Martin kzbin.info/www/bejne/n4rJhGmKd9Ojlbc

[@juliamartin4141]

Dora Medeiros thank you!

[@doramedeiros2048]

Julia Martin , your very welcome!

[@sihamtabib2308]

Thank you so much

[@ameliadiaz4308]

good instructions. thank

[@nobracobra]

i just received the 1541... waiting on the table w/casters... hopefully this is close enough to the assembly of mine tyfs

[@justthegoodbits1]

Many of Juki’s sewing machines use this same table. If you need help don’t hesitate to ask questions we will help if we can.

[@CB-hi7mf]

You have a way better video than that other guy.

[@kusumbohara7300]

Thanks

[@gramma9826]

Oh I purchased one for my Juki TL-2010 and it's wonderful. The only tip I could give you is make sure you are putting the bottom brace where you need it for your machine use. I am using the foot pedal right now and we should have put it in the back section and sadly it is in the front and has to be moved

[@justthegoodbits1]

You need to remove the sewing machine, then the table top, rotate the table top 180 put the table top back on and then flip the foot pad and put the sewing machine back. Our video kzbin.info/www/bejne/qWiken-XmbaMhLM will show you how to correctly put the table together.

[@eliastawete6020]

How much price these machine ranging? In USD help me please.. Thank you

[@andyvan5692]

nice video, but the setting of the height also depends if you are sitting or standing, and if you have a gas lift office chair, or just a set height dining room chair. ( as there you have to accomodate the operators knees, so the lower leg height is the important one in this case.)

[@justthegoodbits1]

Good point!

[@axa5005]

Thanks so much for this video! Do you have details on the motor - model & version? I have watched several videos for this machine and seems like there are different types of models that are compatible with it.

[@justthegoodbits1]

There is a link under the description box giving the machine purchase price and all the information about this machine. Here is information I copied from the listing: uki DDL-8700H High-speed Lock-stitch Sewing Machine for heavy material .ASSEMBLY REQUIRED, please note machine comes unanssembled **This model is NOT a walking foot !** ✅It comes complete with sewing machine table and Electronic DC Servo Motor 1/2 H.P, 1 PHASE, 110 VOLT, 0 ~3300 RPM (Model DMS-550), everything (drawer, belt, tools,lamp and instruction manual) brand new, paed boxes and never been used beforecked in seal The Juki DDL8700 H "Heavy"model don't have the walking foot mechanism in . ✅SINGLE NEEDLE LOCKSTITCH AUTO-LUBRICATION OF HOOK HORIZONTAL AXIS HOOK AND BOBBIN ADJUSTABLE REVERSE FEED ✅INCLUDES: Thread Stand Bobbin Winder Oil Pan/Knee Lifter 5 Extra Bobbins 10 Extra Needles Instruction Manual Screw Driver Machine Oil Table top (size 48" x 20") Heavy Duty Legs, Table Top,Clutch motor V Belt Hardware ✅ASSEMBLY REQUIRED, please note machine comes unanssembled

[@user-rh6td8ym8t]

Good 😯😯😯👍👍👍

[@danaschaefer6473]

Thank you for this video. My sewing machine didn't come with instructions. :/

[@frankjanvari8650]

hello very nice video please have the lady demonstrate using the knee lifter and foot pedal being used and some sewing please thank you very much.

[@justthegoodbits1]

We will be listing videos on the functions of this machine plus tips and will make sure to add the knee lift being used. To make sure you don't miss these videos click on the bell. Thank you for your comment.

[@JohnDoe-bf1fw]

Question: I live in a small apartment building. The walls between neighbors are somewhat thin, but do offer a fair amount of noise isolation. I want to get a Juki 8700. Would this machine be too loud for my neighbors?

[@justthegoodbits1]

Not at all, the Juki 8700’s motor makes almost no noise at all. The only noise from this machine is the stitching.

[@sherryv8409]

Do you have a video on how to put a motor together on a juki DDL-8100e. Mine didn’t have instructions

[@justthegoodbits1]

If you mean mounting the motor that is in the video. We have no experience putting the motor together. I hope that Helps.

[@LocalTravelr470]

Very nice. Sir my machine is taking cloth in reverse, when I stiching. Can u give me solution sir

[@justthegoodbits1]

Sounds like the reverse is stuck, work your reverse switch back and forth running scrape fabric through the machine. If both forward and reverse is moving in reverse oil may help. Perhaps there is a Video here on KZbin that will show you how to oil and fix your reverse, maybe you need to replace the switch.

[@CB-hi7mf]

I had to leave my belt guard kind of loose cause it was snug against the belt

[@user-qx6nl6mb1z]

Thank you! Is this 8700 N ?

[@justthegoodbits1]

8700 H

[@ngmnayak]

Good #jukiindia

[@conceicaocontee2805]

The belt that came with the machine is a M-39 and is too loose on the pulleys. Did anyone else have this issue and do you know what size is correct?

[@justthegoodbits1]

The size of the belt depends on the size of your motor pulley the link below is for the Juki DDL 8700 & H manual on the last page (12) gives the size belt for the different size motor pulleys used on these machines. www.juki.co.jp/industrial_j/download_j/manual_j/ddl8700/menu/ddl8700/pdf/instruction_eg.pdf

[@barbaradanko9603]

Hello can you tell me were you bought the Juki ddl - 8700 i looking to buy one thank you.

[@justthegoodbits1]

hello Barbara Danko, There is a link in the description box below the video. Thank you for your comment.

[@CB-hi7mf]

My bolts are sticking UP about half inch on the table what is up with THAT?

[@justthegoodbits1]

send me a picture showing the screws

[@davidhansen1478]

I'm (the wife, lol) thinking of getting one, so this has been very helpful. Do you do free motion quilting with it?

[@justthegoodbits1]

I removed the feed dogs and have done a quilted Halloween bag but I must warn you this machine is really fast and takes a lot of time to get the hang of it which I still haven't but when I do I will upload a video.

[@davidhansen1478]

@@justthegoodbits1 I subscribed so look forward to seeing more. I worked at a shoe factory a zillion years ago, those were super fast too. Of course, industrial. What's your normal sewing machine?

[@justthegoodbits1]

Juki TL - 98 QE a quilting machine and Singer XL 580 embroidery machine which i use for sewing only when I need a decorative stitch, zigzag stitch or button hole. The Juki TL - 98 does none of those.

[@JericaGilbertSims]

How far from the edge is the leg closest to the motor?

[@justthegoodbits1]

About 14.5" hope this helps. Thanks for your question. Sorry it took so long to answer.

[@stylingtips8766]

My machine head is not turning, how can I lift the head ?

[@justthegoodbits1]

It sounds like your head has froze up from lack of lubrications. Has your machine been sitting along time? The oil does not get to your machine unless it is running. If you have been using your machine then it may be the pump which pumps the oil up to your machine has stopped working. Oil your head and the fly wheel and if you can the shaft in-between. If that works then it is the pump if not you need to take it in to be serviced and fixed. Hope this helps and thanks for your comment.

[@moeakawi1826]

Please how can I know if juki 8700 original or fake ? Thanks

[@justthegoodbits1]

Oh wow, I had no idea this was a problem. I would suggest you buy from a reputable (good reputation) dealer. Do a web search (google) on the dealer or name of the company. If you can’t find any reviews at all perhaps you need to look somewhere else. Contact Juki and ask.

[@bhavnaparekh2295]

How many rupees this machine.

[@justthegoodbits1]

Around 54692.9125 INR Rupees Or $725.00 USA but prices fluctuate. Thank you. Link to buy in USA is in description box below the video.

[@fouziafirdousi8852]

What must be the height of the machine plz rply Previously I uesd old vidya sewing machine but since last two years I'm using juki DDL 8100 E model . Since then I have got neck and shoulders pain I think it's because of the machine and improper sitting chair Plz help me out of this Pls do rply what must be the height of machine as well as the chair or the stool

[@justthegoodbits1]

I understand where you are coming from I too had pain, mostly back pain until I purchased an adjustable chair with a back that pushes against my back. I found the perfect chair at goodwill of all places and gave my expensive chair to my husband for his desk. The legs are adjustable on your sewing table and should be adjusted to your own height. I'm short so how high I have mine will not work for you. Sit with your feet flat on the floor and your arms flat up to your elbows on the sewing table, with your back straight and arms at a 90 degrees flat up to your elbows on the sewing table top. Adjust your chair and table until you can sit in this way comfortably. You will need help to do this. I hope this help. Did you need us to make a video on the best way to adjust the sewing table?

[@fouziafirdousi8852]

@@justthegoodbits1 Thank you so much dear for this msg it's good if you make a Vdo on this Practically I can understand a bit easier Once again Thanx

[@ajsam1000]

Hello, I love this machine but recently my oil pump broke off, so I was wondering if you can tell me where the rubber joint is attached too, because that came down when the oil pump broke! Thank you in advance!

[@justthegoodbits1]

If you check out the link to our face book page maybe our pictures posted will help. If not post pictures of yours on the face book page so we can try to help. facebook.com/justthegoodbits/

[@Tip_top553]

Pac

[@precioushenderson7240]

Hello I have the same machine but I’m having a hard time setting it up. Is there a way you can put my machine together. My husband will pay you and we can drive to you.

[@justthegoodbits1]

I do not know if we are in the same area I am in the Charleston, South Carolina area.

[@elainebates6967]

But you did need to put oil to 'High' mark every time the oil is changed.

[@justthegoodbits1]

Have not changed the oil yet but when I will I will replace it to the mark given on the oil pan.

[@andyvan5692]

also your cameras autofocus is on the wrong thing ( it's focusing on the closest objects, NOT on where you are moving around, screws you are aiming at, etc. ) NEED to use MANUAL focus or AF mode 'S' for single shot focus.

[@justthegoodbits1]

Thank you for the tip will use in future.

[@rosalinaperez3137]

How much po high speed juki?

[@justthegoodbits1]

Juki DDL 8700 - 5500 Stitches Per Minute, DDL 8700H - 4000 stitches per minute. Thank you

[@izhankhan6872]

please machine ki price Bataye

[@justthegoodbits1]

$719.00 US Dollars. The link is in the description box.

[@educationnotes6571]

tell me price India

[@justthegoodbits1]

Around $720.00

[@nawazkhan5248]

Price

[@justthegoodbits1]

The link to where we purchased our Juki DDL 8700H is in the description box, we paid around $750.00 US dollars.

[@izhankhan6872]

pleasure Scooty price Bataye

[@justthegoodbits1]

Just under $800.00.

[@moziburmozibur7226]

DDL 8700 mobel Bangladeshi price

[@justthegoodbits1]

Here is the link for the USA listing, do not know the Bangladeshi price. Thank you. DDL - 8700H: www.ebay.com/itm/JUKI-DDL-8700H-Industrial-Sewing-Machine-with-Stand-Servo-Motor-LED-LAMPS-USA/142549580727?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

[@muhammaddaudsoomromdaudsoo6575]

اوریجنل۔جپانی ھی یا چائنہ۔پاکستان مین کہان سی ملیگی قیمت کیہ ھی

[@goheldilip4711]

Price

[@justthegoodbits1]

Check description box for a link.

[@taslimaakhi2225]

Price

[@justthegoodbits1]

Around $750.00 Link is in description box.

[@justthegoodbits1]

Taslima Akhi222 around $750.00 link is in description box.