Juki MO-6816S threading video - SewingGold.com

Threading a Juki MO-6816S 5 thread serger.
We make a mistake in the video threading the safety stitch looper. We do go back and fix it later in the video.
sewinggold.com/product/juki-m...

[@al_rabeia]

Thank you very much. The video is more than wonderful and the photography was very excellent. Thank you, the best people in the universe 😘

[@sallycole8880]

Thank you for this video I could never have threaded this serger without your help I will be watching it over and over

[@Sewinggold]

Excellent!

[@michaelsrowland]

Did it not come with threading instructions

[@brhananguse8676]

Thanks you very much❤❤❤❤❤

[@beckym5215]

I can’t get the machine to pick up the “bobbin” thread (the first one I threaded). I have watched and followed your video - any suggestions what I might be doing wrong?

[@dixieleigh070]

same

[@TPSerna]

It would be great if you show the MO-6843S threading procedure !!! I just purchased a 6 thread JUKI industrial and the manual does not include it.

[@geovanitorres9377]

Excelente, muchas gracias por la explicación

[@bertiesretroboutique562]

Oh gosh so helpful!!!!

[@peggybauch2718]

Great Video - Thank you

[@Sewinggold]

Glad you enjoyed it

[@aht4965]

The video is very helpful. LIKE 👍👍👍

[@Sewinggold]

Thank you! Cheers!

[@shoshanna4024]

OK so when you’re finished with the outside looper thread where do you place it so that it connects to the needle and makes the safety stitch that’s a tad confusing I can’t get mine to create the safety stitch

[@FashionProfessor]

Does this machine only create a 5 thread stitch? And a 3 thread stitch? Does it do a four thread stitch?

[@simoneswantak814]

This video is an excellent resource, can you do a video on adjusting the differential feed? Thank you!!

[@cdiran]

What do you mean by adjusting the differetial feed?

[@HumaniteAmour]

Bonjour Merci Steve

[@Sewinggold]

You care most welcome.

[@sallycole8880]

Is there a link of how to use the four threads alone without the straight stitch?

[@Sewinggold]

You cannot do a 4 thread stitch on a 5 thread serger. If you remove the left needle you can do a 3 thread stitch.

[@sallycole8880]

@@Sewinggold thank you. What about the chain stitch threads? Do I have to pull out all the threading? Is there a way to leave at least that back one that is hard to get to somehow still threaded?

[@bahiyahadderly8622]

how do you know what the correct thread tension is?

[@unfltrdpassion]

Really interested in this machine for when I have heavy fabrics. Can the safety stitch width be adjusted to be sewn closer to the chain stitching? Can the Heavy 50H models work with medium fabrics also?

[@Sewinggold]

The chainstitch width cannot be adjusted. The 50H will sew just fine on medium material. The 60H is really the heavy-duty model. The 50H I would consider medium.

[@sweetstrawbies55]

Hi! Can you make a video on how to change the needle? Thank you!

[@kyu7438]

Very nice viedeo, Does anyone here can recommend me a Brand for overlock sewing thread and how thick the thread Should be, thanks.

[@happygocrafty]

What are some reasons you’d want a safety stitch?

[@Sewinggold]

Stronger stitch, stronger seam.

[@michaelsrowland]

Can the presser foot be lifted 10mm?

[@cpcjam9447]

Hi Steve, HELP!!!! I just got a new serger like this but the thread for the outer stitch tension is so much that it keeps breaking and does not sew. Any ideas on what I might be doing wrong. I followed your video and the threading is exactly as you demonstrated.

[@Sewinggold]

When you slide the thread through the tension it feels tight?

[@mazzm9841]

What tipe of threads want to put?

[@spstrock]

Curious as to the maximum needle size and thread size that can be used. I have seen references to using 69 with 16/18's. Curious about 92 with maybe 20/22's. Thank you

[@Sewinggold]

I would use size 16 at the most on this machine. Depending on the type of thread, T70 would be the largest. I would stick with T45. Bonded thread will not work well in this machine. We do have an MO-6716S-FF60H that can use up to a size 22 needle. It can use the heavier threads. We have used T70 bonded nylon in it.

[@Thuraya2021]

Just used my machine for the first time and it’s going in reverse Mo6814s any help would be great

[@2010stoof]

Can this be run as a 3 thread as well with just the inside needle? No safety stitch?

[@Sewinggold]

Absolutely.

[@emmarivera8295]

Para qué tipo de trabajo es

[@gazalsandhu6534]

Hi can you please help me to resolve reverse serge problem in this machine. I think I pressed something on system near power.

[@Sewinggold]

Check the motor rotation. It should run clockwise.

[@padminiram926]

Hi Steve

[@Sewinggold]

Hi