Jumper T18 PRO 🔥1st Look | How to Bind the 5in1 | Upgraded Gimbals

[@Okabae]

Can you guys compare it to the Radiomaster TX16s which is supposedly better than the Jumper T16 Pro... how does it compare to the T18 series?

[@rcoops58]

Have you tested to see if models can be moved from T16 to T18 via Companion or otherwise?

[@wurisupit]

Hi , Thank you for your video is helping me to understand di remote, buat what I dont get it is, How to change power output while Im using R9 built in modul ? cause ive been observe on internet, this R9 built in can be reach 100mw-300mw, but I dont find how to change it

[@grim2149]

Hi, but does the T18 pro have the Access protocol? I can not find. thz

[@OinTaylor]

I like you guys and your videos but I have to say that seems a little strange that you will say they did not include a touchscreen because the touchscreen support is not there yet and it's likely to be janky when it comes out but then you say the 915 MHz module will probably take a couple updates before it really starts working properly and you're okay with that... ?

[@graysonhobby]

Think of it like adding the flux capacitor without mr. Fusion. Basil

[@cappy0815kanal]

Can you say something about the different DSM2/DSMX modes? Have some troubles with connecting a micro receiver

[@davevipe]

This is not a touchscreen ready right? The radiomaster tx16s is the touchscreen ready and waiting for the firmware open tx 2.4.. still jumper sucks...

[@Stashmanfpv]

Grayson Hobby - the scroll wheel is kinda' wonkie. It overshoots, or undershoots its target at times... Jumper had sent me a .bin for a software upgrade to fix, but where do I place that .bin? In the FIRMWARE folder of the SD Card?

[@garys3418]

Honestly if I had known the touch screen was going away I would have pre-ordered the lite ver. instead of the pro. Kinda bummed

[@scottyd035ntknow]

The Lite is the one to get. Still has Hall Effect, has an external 2.4ghz antenna instead of a non dual diversity internal antenna and costs the least. Crossfire beats the hell out of R9 anyway so the 5 in 1 is a non issue.

[@turtletime705]

On the t18 pro is there a mod to have the throttle self centering for rc car/truck use

[@TechieMillennial]

So it won't work with r9m access right? Are there even non access r9m receivers?

[@trnkillomn8592]

Hi, its possible to add bluetooth transmiter (like hc-06) for use with mission planner for android ? Thanks

[@calibermix8159]

oui

[@trnkillomn8592]

@@calibermix8159 thanks but where to weld the hc-06 (or 05)?

[@ramjet0011]

Hi sirs I'm just new to this and I got my t18 and I'm having a problem on how to bind it with my betafpv 85 pro, plus I can't seem to add a new model to the t18 (or I just don't know how) so please I need help thank you so much.

[@jagercowmaster]

Grayson hobby i need ur help in the special mode y i cant find arm mode

[@chriscottell6854]

How do i bind the Jumper T18 Pro to the Traxxas summit?

[@JohannSpringsits]

Hi I bricked my Jumper T18 and repaired it with DFU but now the SD card does not show up the same like theT18 on Desktop But the radio starts normal what is wrong must I make another update or what

[@alessandrocoppola3081]

Hi guys, I have a problem, I buy T18 and R9mm reciver, but binding doesn't work! How can i resolve?

[@jeffgrave]

No one is mentioning if this radio has "fail safe" mode? SO I can pre program a radio setting if the radio loses communication to my receiver. Does the T18 PRO have this?

[@graysonhobby]

it has fail safe for 2.4ghz as of June 2020 - We did a video on the T16 FailFail - it an opent tx / multi module feature, not the radio.

[@sleepyheadfpv1507]

Got mine today! So freaking excited! Just the look and gimbals sold me. That radio is sexy.

[@abdulduriya2251]

Which is the better buy Jumper T18 vs radiomaster Tx16s ?

[@crazychange5635]

I was hoping for internal charging. Kinda of disappointed or cordless magnetic charging.

[@scottyd035ntknow]

Bob's battery mod. 100x better than USB charging anyway and you can power a Crossfire full size module from the radio battery using it.

[@MT-Vintage]

Hello ! I have consulted some information from users, they said that the upcoming TX Jumper T18 pro has a touch screen. But now T18 pro products are sold due to faulty screens, so OpenTx does not support firmware for touch use.Is what they say true? Thanks .

[@DemoPwr]

Jumping ahead of the game. I'm a happy owner of the Carbon fiber version of the Jumper T16 Pro V2 w/hall...I hope that Jumper have done all their homework to get these awesome radios to perform at the highest degree. It's been 2 years since I purchased the Jumper T8Sg Plus Hall that bricked on me, hopefully they changed the game. Cheers!

[@brod5352]

Hey Guys. Is there a problem with the charging upgrade I purchased for my T16?

[@bluesquircle2102]

Can the t18 connect to d8 receivers?

[@JJJJJJJJJJJZZZZZZZZZ]

Jumper t18 or radiomaster..?

[@calibermix8159]

same junk

[@DavidReynolds-kr6yh]

Radiomaster is definitely going to be better.

[@calibermix8159]

@@DavidReynolds-kr6yh Jumper hardware looks better but the electronics have always been flawed

[@dronedownunder652]

Radiomaster...as soon as they dump a 5 in 1 in it and fully support it with OpenTx.

[@brianmar8850]

Does anyone know if the internal charging mod from the t16 works on the t18?

[@scottyd035ntknow]

Probably not but Bob's battery mod does. And its way better.

[@metoo3918]

What mod? I thought the 18's all have internal charging.

[@CorruptName1]

Why has nobody mentioned that the "LS" and "RS" are backwards. I noticed this on first power-up. In the software, they are correct but on the faceplate they are backwards.

[@rcoops58]

Mine will be here Monday. Can't wait. Thanks guys.

[@zmanphx]

Futaba uses panel antennas on their T 6K without issues.

[@calibermix8159]

apples to oranges. Futaba is not Jumper.

[@scottyd035ntknow]

@@calibermix8159 Yep... and funny how these guys are making fun of Futaba in the beginning... like... Futaba is pricey but they are light years better quality. That said... I'm not paying $2k for a transmitter unless I'm actually flying competetive.

[@calibermix8159]

@@scottyd035ntknow I didn't say Futaba was the best quality ever made because they also use cheap components I was just comparing the reliability of the antenna or RF link to Jumper

[@pierstaylor7780]

Good video but my r9 didn’t bind with the t18, really frustrating

[@graysonhobby]

We had it working, you need to look at the firmwares

[@spyder000069]

Hope they come out with a usb-c charging upgrade. Radiomaster figured it out.

[@slider9780]

i can't bind T18 pro jp5in1 with my jumper R900

[@matthewschillawski6594]

Mine came today. Turn on says No SD card. doesnt load any ideas?

[@FlyingBuzzard]

Ok maybe you have answered this before, but looking back I did not hear it so I will ask it here, WHAT is the Difference in OPEN TX and DEVIATION software?... I ask because some of these Jumpers are using one and some the other... ( note I use the original Jumper T8SG [ Black& Silver one ] it has Deviation )

[@GBoniFPV]

They are both software to run your TX . They are both open source software. Deviation also started the multi protocol project. That is why earlier Jumper are running the Deviation firmware. The 5in1 or 4in1 module are based on Deviation multy protocol software. You can actually directly download the Deviation firmware on most Devo TX.

[@kevindodson7886]

Do u still have them in stock

[@parker1ray]

Its now late 2021 and the new T18 Pro V2 has a touch screen!

[@bm51879]

I have a 32 gig at home will that work ?

[@SandeepSingh-wr5fh]

Jumper 18 pro or frsky x9d se 2019 which one??? Anyone

[@DavidReynolds-kr6yh]

As much as I like this one, I’m still glad that I preordered the radiomaster, as it seems to be a bit better quality overall, and with the internal charging, and no touch screen, means it’s behind the game.

[@DavidReynolds-kr6yh]

Plus the additional cost is another reason why I believe I got the better radio.

[@scottyd035ntknow]

@@DavidReynolds-kr6yh True, the value is great. There have been a TON of issues with the RM QC wise tho... hope yours is fine. From ppl already having to do roller wheel mods and install a louder speaker to switches not working...

[@kevindodson7886]

Jusy wish my original t16 hallsensor worked

[@Hexa8]

It's great video I been in market for new radio so which one I should go FrSky ,jumper,radio master,could not decide which way to goooo

[@graysonhobby]

Radiomaster as of Jan 2022

[@Hexa8]

@@graysonhobby appreciate the quickest reply ever I got that's awesome👌 Any specific model you like to mention and I believe open source and compatible with many receivers

[@jrb8081]

Great video. Ya'll are great guys with a great hobby shop with great service.!

[@n8zfpv]

yep, just get rid on the trojan on their website

[@ajosepi1976]

I purchased my T16 mainly for a future robot build that more than 16 servo channels could be enough to justify getting a T18. I saw there is a possibility of 32 channels with the right receiver, but that is all I have seen. What 32 channel receiver works and could be used to control 18 - 20 servos with some of the other channels used for other things like lights and Arduino input. I see very few people using more than say 8 or 10 channels tops so information is slim.

[@Mikeylikesit1968]

just use two 16ch rxs

[@fpvhead4312]

when will the T18 ship

[@Stashmanfpv]

Now! 🎯 Mines already in the mail w/ tracking. It's comin' buddy. 😎 ✌🏼

[@stevemann6082]

nirvana already has touch screen, its ok but i prefer having a key input option.

[@NoiseBoysGarage]

I’ve tried to contact your custom service and still no help. I’d like to continue to be a customer but not this way .. not without help

[@anthonycanthaveit8844]

Nirvana has a open TX with touch screen...

[@franknicholas5399]

USB-C charging - Actually USB-C is a standard and there is a standard/certification organization. It just means either they they don't know what they are doing, or they don't want to pay for a single chip USB-C charging solution.

[@calibermix8159]

I vote for the first option. the charging system for the T16 was a deal breaker

[@chriscottell6854]

Shame u can't slide ur phone into the side or bottom of the radio for touch screen.

[@dronedownunder652]

Great review guys. I have a T16 and also had nil ribbon cable problems however their deletion in the T18 is very welcome. That said, I use 18650s in the T16 (as I have heaps) but the T16 churns through them pretty quickly which means you are regularly taking the back off to charge/replace them. With all those lights I can't imagine the T18 will be any better on energy consumption. To not have external charging on the T18 Pro is a WTF moment! Yes, I know there will be an upgrade kit in 3-6 months but to be honest I will just wait ! As i said, great review, really enjoy your reviews.

[@graysonhobby]

Thanks for the honest feedback!

[@Stashmanfpv]

Not sure why internal charging is a bonus? I mean, I dont charge my lipos in my kwads or aircraft... I feel safer taking my batteries out to charge, as I like to keep an eye on 'em, but thats me.

[@dronedownunder652]

Because it's easier. Also mucking around with the leads and connectors in the battery bay is fraught as they are pretty frail.....the connectors on your quads are XT30s or XT60's maybe....much more robust?

[@MissingNumb]

My t16 (pro v2) charges my 18650's fine internally with a usb-c cord from my low amp output pc jack. All the kids whining about it not supporting high amp charging via "USB-C Protocol" kind of miss the point in excluding it. Jumper has no idea what kind of battery your gonna rig in there. End users could be putting in a dangerously low c rating lipo or lion and putting a lower amp "trickle" charge board makes way more sense from a business perspective, as well as moral should there be a loss of life. You want it badly enough, buy the cheap chip and engineer it in there yourself. Buy first, cry later is always the adage for industries and companies this new, especially in fpv. I flew a $30 Flysky I10 for years before I decided the t16 was worth the jump into a serious tx. I was lucky enough to be in the market after it was fully revised and can understand the buyers remorse. Yet even early production T-16s are leagues above the more costly x9d standard of days past. Where's the innovation there, frsky? Same radio for years and years nothing majorly improved, not price dropped. Also the people upset on ribbon cables are really the true "Karen's". Aside from the qc problem of pinched cables during assembly, ribbon cables on fixed, non moving components will pose zero reliability problems. Y'all better be complaining to Samsung, Apple, TCL, the phone your using right now, all the makers of any electronic device your using with a screen. Y'all misinformed trolls messing with these solid guys livelihoods in a sense, and I don't appreciate that man, Basil and Will run an amazing business! Aloha brothers from Hawaii and keep flying high guys!

[@dronedownunder652]

@@MissingNumb good rant, not sure what it all means, but good for you !

[@rydfree]

You can't just say the internal 2.4 ant doesn't give any less range , you have to do a proper range test comparison . I've watched a couple good reviewers that have shown that it does have less range than the comparable radios with a standard stick ant . I am skeptical of that short (2.4 style) external ant they are using for 900 MHz . Antennas for 900 MHz are generally double that length . Without a touchscreen and internal charging this radio should cost no more than last years T16 Pro .

[@DK-hs3oz]

Howdy, Thanks for the info. Please consider editing in some in focus footage of the radio internals, and performing some voice over in addition to your live commentary. That said, thanks for the look inside, and the honest info on the brand and product.

[@scottyd035ntknow]

There is 0 upgrade to this over the T16 hall except for no ribbon cables. Which is actually a big deal. No touchscreen, no internal charging and the 900mhz is... yeah... My 16 Pro Hall is still working 100%, never had a ribbon cable issue and hoping that I don't and the new ribbon cable fix is good. Plus a single internal antenna because the external is taken up by the 900mhz. T18 Lite is the one of these to get if you get one. I'd be really pissed if I ordered the regular or the Pro honestly. Get the Lite if you get a T18. And I am probably going to get a T18 Lite because I hate thew way the RM looks and I'm going to move my Bob's battery mod from the T16 over to the T18.

[@tomgarrett7567]

Wow you can’t get Rssi or a fail-safe with r9 nice half a job done jumper

[@frizzle101101]

why is no one talking about the non pro gimbals, tbh dont care about rdc90

[@eggfpv7291]

Please do not charge any battery in your transmitter in the first place.. bit of a gripe on people that want internal chargers. You dont charge your lipo in a plane or quad do you ?

[@Mikeylikesit1968]

Do you take your battery out of your cellphone to charge it. You must be a newbie cause back years ago thats how you charged the batteries in your transmitter

[@calibermix8159]

@@Mikeylikesit1968 LOL it must be another old fart that pull the battery out of the hatch for charging

[@n8zfpv]

yep, true for lipos. But most of the users are using cheap Li-ion 18650s. They are safe.

[@Freebird_67]

My T16-pro v2 was worst $180 I've ever spend.

[@n8zfpv]

i bet my ver1 was worse. Didn't keep time, battery error, even replaced it internal battery, followed by the intermittent keystuck error. Even replaced the suspected MDL board with 3 new ones boards + ribbon cables.

[@Freebird_67]

Sorry but I won't buy anything even related to jumper again.

[@n8zfpv]

ditto

[@henvan8737]

T20 in the pipe line

[@GTARC_au]

I'm glad they left out a touch screen. Stick to buttons and rollers Jumper... Great review guys! 👊✔👍🍻

[@calibermix8159]

you will regret it on 2.4

[@vuhuynh9706]

I like you guys. But it is clear that you guys are playing defense lawyers. Coming up with far reach excuses for Jumper misstep with the release of the Radiomaster. Charging more and giving less. I would not be surprised if Jumper releases the Tx20S Pro with touchscreen and internal charging next month.

[@jimkehoe6495]

they have mine too? bullshit. not in stock

[@alancarter8396]

I learned absolutely nothing about the transmitter. Usually your videos are guide informative but not this time.

[@Freebird_67]

That's definitely not the correct antenna for 915mhz. Not even close.

[@graysonhobby]

That's the same style antenna that came with the frsky R9M

[@gmivisualsjason3729]

I'm not a fan of this radio....I think it's overpriced with more negatives than positives. RadioMaster is the bomb... But I really enjoy your videos