JumperT16 Top Questions Answered | Jumper T16 Pro Bootloader - Does Mine Have it?

[@garyreinke5161]

Why is this hobby so difficult to setup a quad? Binding, protocols, software configs, modes, etc, etc. i have spent countless hours researching, watching KZbin videos. I spend more time in the setups than flying. These guys rock!

[@BigDFPV]

Basil saved me with my T16 Pro. The scroll wheel was messing up really bad, he told me to spin the ribbon cable around on the scroll wheel board inside the radio, well I did it and it works as good as new now. Thank you very much Basil for the excellent over the phone tech support. So if that happens to anybody else, just do what he said and you should be good to go. Took less than 5 minutes to fix.

[@ajosepi1976]

I 3D printed a battery cover that I modified from the 3D file on the Jumper XYZ website. I made a Y plug wire for charging externally. It works well. The best part about this TX is it is easy to modify. I would never do any of this with my DX9.

[@ttdriver7827]

Hello my t16 dont schow the internal HF module on the menue anymore do you know why this happend, i dont change anything on the Radio. After this i have Flash the Firmware to the latest version but nothing changes. The Radio is delivered in january also almost brand new . I hope you can help me. Gretings from Germany

[@johnmcdonald5008]

Hi! I have a bootloader i have bricked it really bad I followed JB 3 ways how to un brick it but to no aveal so maybe I would understand your instructions so if you can help plz do thanks?

[@vonSchwartzwolfe]

How well does this radio run basic DSMX and DSM2 receivers? I've got a large hanger all outfitted with them and in the market for more channels. the cost of the spectrum radios is just gone over the top for me.

[@DavidReynolds-kr6yh]

Ron DuBray , in the video they mentioned that some of the earlier versions had a problem with spektrum recievers, so by that I’m thinking that it shouldn’t be a problem with the newer version radios. I’ve got one myself and Ive now got the tbs crossfire unit in it, and I can change between those two and with the crossfire I can get some incredible distances. But even with the spektrum radio quads I’ve got, I’ve had no problems.

[@Erskines]

This was a very nice! Now my radio and module is up to date. But i still not get any rssi warning from my radio like Frsky Qx7 from xm+ in my drones. When plug/unplug battery from drones Frsky radio tells me "rssi lost/rssi recoverd" But my Jumper T16 pro dont. All audio files are ok on memorycard. Thanks for a nice guide.

[@michaeljohnson6473]

My Jumper came with open tx 2.3.2. My Spektrum receivers have a bug.. Even with extended end points turned on, I don’t get full travel in all channels.. I could only get it to give me %90 travel.. Is there anything I can try to fix it? Should I try to update it??

[@thegrafxguy1]

you guys rock, thanks for all the info on this radio, it's helped a ton!

[@graysonhobby]

wow, thank you for the kind words!

[@bobsterit2463]

Does the new OpenTx Companion allow you to made a backup of your radio?

[@alonzoellis6686]

You guys are great. Love your input to Jumper t16. It's a great radio with greater potential, such as a one shot FPV sys in that the screen is large enough to become the radio screen as well as the FPV screen that would be great. When I do order one it will be from you guys, because you do all the up grades before you ship the radio. or do you guys offer the upgrades.? Will you put Open TX on the radio as a paid service. I would want the radio to come with the best upgrades with Open TX.

[@matthew04101]

can i adjust the signal power output ?

[@stewartdavis8618]

Hi guys I'm know i'm being thick but which is the link to show me how to install the bootloader to my internal module ??

[@RickMaddoxSr]

Thanks for the video guys. Just got my T16 from you and love it.

[@graysonhobby]

Awesome! Thanks for the support!

[@jebrc]

So the module you sell now has the bootloader? I have the regular version I put the hall gimbles and the internal module but still need the bootloader

[@brokenfpv4601]

Are you guys getting them in stock today?

[@KelleyCycle]

Thanks fellas, I'm a brand new T-16 owner (version 1 red logo) and your videos are very helpful. I've just completed the update to OpenTX but there's one thing I can't figure out though.... I program my models as AETR but channel 1 on any RX I use (Flysky or Frsky) is controlled by the rudder stick NOT the aileron like I want. Why is that? What am I missing??

[@abghere]

There is a black and a silver version? Are they the same apart from the color? Don't see the selection on your web site?

[@graysonhobby]

The Black on has the 'Custom' Carbon Frame installed - all parts here graysonhobby.com/jumper-t16-pro.html

[@rogergravel6638]

Thanks great information i have a tattu 2500mah2s lipo in my jumper t 16 it fitted perfectly

[@graysonhobby]

Wow, great to know, did you have to modify the connector?

[@rogergravel6638]

@@graysonhobby No I use the balance plug it's the pack for fat shark google (with the led on the side to check the batt voltage)

[@rogergravel6638]

fpvqe.com/lipo/3010240-tattu-2500mah-2s1p-fatshark-goggles-lipo-battery-pack-with-dc35mm-plug.html

[@graysonhobby]

@@rogergravel6638 Oh that one! We have a better one on the way! :)

[@h2o-fpv623]

Guys thank u for the video. I made a mistake when I was updating my radio and I downloaded the wrong thing now if I download in another card the right firmware on the card I should be able to continue? Thank u for all the work u guys are doing for the community.

[@shenanigan3083]

Has the sight been improved It seems like it 👍🤞

[@karldunn1464]

Thanks for the great info Mine will be here this friday

[@graysonhobby]

Hopefully coming from GraysonHobby !

[@chjky60]

I need a motherboard for my jumper t16 pro, any help finding one?

[@graysonhobby]

absolutely, send us an email or join our FB Group and we can get you anything you need from Jumper.

[@chjky60]

@@graysonhobby email sent..Thanks.

[@shozabidelou9492]

Thank you! Your video saved me!

[@gsreinke]

Jumper T16 can be updated with Companion via USB with PC

[@ray4lsd]

Thanks for this vid, super helpfull

[@graysonhobby]

Glad we can help and thanks for watching!

[@frank17021967]

Very Thanks !

[@christesterman5004]

Sorry for this post Wil and Basil. But I'm getting pissed all of your past videos(15) have been on this damn radio. Don't you guys have any quads to review???

[@Mikeylikesit1968]

F Quads , they ruined the hobby

[@graysonhobby]

Quad companies do not like the truth when we converse with them about issues we find. They just like the "THIS IS THE BEST QUAD EVER" reviews which we do not do and therefore we no longer receive many new quads for reviews.

[@graysonhobby]

@@Mikeylikesit1968 reckless pilots ruined the hobby -Basil

[@christesterman5004]

Thanks for opening my eyes, Basil!!!

[@kellygrajek]

I think Basil might be ummmm taking rides to FL to get his supplies for charging his "batteries"

[@emilgabl9069]

Yes

[@gbro8822]

Thank you

[@graysonhobby]

Absolutely! Thanks for watching!

[@williewoolery4722]

Sorry I might have let a couple sailor words out. I apologise. It's how I talk but not!Ally not how I would write.

[@emilgabl9069]

Grayson videos are ok but they move to fast and are not good at explaining how things work...Shumi UAV...has a better channel where he explains how to set up expo, throttle shut off etc...

[@DavidReynolds-kr6yh]

emil gabl , no Joshua bardwell.

[@emilgabl9069]

David Reynolds yes...I forgot he is excellent. That is where I learned most everything! 👍🏽

[@graysonhobby]

This video was not a tutorial! But thanks for watching!

[@emilgabl9069]

Grayson Hobby I know it wasn’t...I was talking about your other tutorials. Guy with beard talks too fast. When I try to listen I have to keep rewinding to hear and see what u r doing in your tutorial videos.

[@72lonewolf72]

@@emilgabl9069 Who is Shumi UAV? I tried to Google that but came up with some Japanese stuff.