HVAC: Centrifugal Condenser Water Pumps Not Reading Water Pressure (HVAC Pump Service/Maintenance)

[@roybm3124]

That place looks very well maintained.

[@izzybell11]

Great job as always. Interesting and helpful video. Well explained. Thank you JMT

[@steveweld5573]

Thank you for showing us around. It was really cool to see. Great job JMT!

[@JumpermanTech]

@steveweld5573 You're very welcome & thank you for watching! Glad you enjoyed it🤙🔧⚡️

[@JumpermanTech]

@@steveweld5573 Thank you!

[@mmorrison6775]

You do great work I myself have been doing HVACR for 40 years and still learning as well

[@robomaniac8]

I usually go 4 wraps on my Teflon but I see no problem with your method as shown. Good job as always jumper 👌

[@christopherbarrett6408]

Your videos are so educational and informative. Thank you

[@stevencossaboon3237]

Nice work Jumper Man, at least now you can see accurate pressure readings.

[@revzone3544]

I was taught to never twist a Guage like you do, only get it started a few turns then snug with a wretch so you don't damage the Guage internals by pushing or pulling on its housing..

[@scottmaz4063]

Well done JMT and happy belated Thanksgiving to you

[@j.b9346]

Great video, thank you… I like to date my gauges just so I know how old they are. Not sure what the manufacturer life spans are…. I probably wrap 3 to 4 times. I’m a tape and paste guy

[@geogreandraws1053]

This video dont count brother we need 2 more videos 😂 im not tryna wait a week to watch this 😂❤️

[@enjoylife5138]

Great sir

[@JumpermanTech]

@@enjoylife5138 Thank you & thanks for watching! 🙏🔧⚡️

[@coreyr8870]

I was taught that 2 wraps of Teflon tape was adequate.

[@matiastripaldi406]

I guess it depends on the clearance between the male and female thread, the wear on them etc

[@zekenzy6486]

Great job . Thank you for sharing. Have a nice weekend Thanksgiving

[@Tim.F83]

All the black pipe accumulate mud n junk and clogs up, especially those reducing elbows. Switching to brass helps with that.

[@JohnDoe-ej1lw]

Thank you JMT for great video..I just replaced gauges for CHW and steam at my plant in North Jersey... the learning never stops bro! You the man homie.. Keep you the great work bro!

[@jeepcherokeeguy5742]

We do those a lot as a millwright and align them it can be a pain. I feel your pain on getting wet it’s happened a lot to me. Awesome video bro keep it up.

[@JoseVega-cw7fp]

Nice info👍🏽

[@jonnymac31]

Right on. Snubbers can help lengthen the life of guages that dont have glycerin. Won't help with ports getting plugged though.

[@spacemanwithraygun3933]

Five turns but tight also.

[@sherwinalvarez7365]

Coming across the MB I saw Verizon hanging off that building with no tether working in the cell tower. Crazy. I figured that's where you changed that evaporator on that RTU.

[@romonek]

Debris in the pipe, causing so many gauge not to read. Are you going back to change all of them in 6 months.

[@chevboy4.813]

3 turns is the standard I believe

[@jimbeam275]

What if one of those little twist valves went bad?? 😳😳

[@roybm3124]

Turn off the pump and shut the pump discharge and suction.

[@edwardlowery6510]

does the tower have water

[@edwardlowery6510]

air separators,strainers condenser loop

[@edwardlowery6510]

pump motor inspection

[@thesilentonevictor]

👌🇱🇨

[@JumpermanTech]

🙏🙏🙏🤙🔧⚡️

[@edwardlowery6510]

that 90 is clogging it straight pipe

[@edwardlowery6510]

greasing is involved

[@edwardlowery6510]

if it’s directly from pump more is better

[@edwardlowery6510]

water has a hard time passing air

[@edwardlowery6510]

cavitation

[@ILoveKittys78]

😻💚💜💚

[@edwardlowery6510]

no reason for a 90

[@SergioRodriguez-og7oc]

Water right on the motor good job! #Local501

[@edwardlowery6510]

make up water feed