Junkyard K20Z3 Teardown & PAINT!

[@jaymckinnon8844]

You could build a open shed / open garage so the cars can stay covered and would last longer

[@imtiredtoday]

Exactly my thought, I'll try to scetch one...

[@fuckngreat8955]

Something like a carport

[@TheNinjaMonkey43]

I was thinking this too

[@dallas4616]

Do something like nightride did lol

[@Bucked3]

I funny how we all thought the same thing for him lol

[@jacobcotriss6264]

Day 4 of suggesting Robbie to use MPC Motorsports hardware to finish off his beautiful bay with beautiful hardware!!❤️

[@tommylyeah]

⬇️⭐

[@maxinhooo9679]

Miss the "Robbie Repairs - and Emerson does it" times...

[@aaronmclaughlin2963]

Yea

[@mikaylaracz3342]

It always makes me nervous watching you work in white like I barely wear my white CC hoodie cause I don't want it dirty lol

[@1012Mrjesse]

Dollar store oven cleaner, I’m telling you, best degreaser I’ve ever used.

[@thodore1]

Yesss ! Taylor Ray talked about that in his video yesterday 😂

[@michaelruzzanojr1766]

Facts da

[@CharlezMalasana]

Yeah but you also have to clean it kinda fast. It leaves white stains if you let it dry for too long

[@1012Mrjesse]

@@CharlezMalasana I’ve never let the stuff sit for more than like 2 minutes at most, but I used it on some custy ass 7.3 powerstroke stuff that was layered in like literally 1/8” thick grease and it came off with ease. Especially more so if you can use a pressure washer as well

[@CharlezMalasana]

@@1012Mrjesse I feel you. I completely agree with that, I just wonder wtf they use on it and how toxic it is that it works so well 😂

[@Diablothein]

Out of Context quotes: "I totally thought I was getting like a 3-incher" - Robbie Ferreira

[@jimmywait74]

Bro that's so big that's totally not what I thought I was getting

[@yamilmelendez2667]

I liked the part where he said I dont want anything to pop unless I make it pop 😂😂💪🏻💪🏻

[@ionutanghel2849]

Check the head also because the part of the cam that you found damaged is actually the part of it that goes in the head caps...

[@ryanmorse4507]

There are steel carports that a company comes and builds in a couple hours. We have 2 and they hold up great in the harsh VT winters.

[@ConnorTierney]

Would love to see you build a car cover or shed or something like that

[@FRKahs]

Maybe you should build a small roof with some concrete underneath to protect the cars next winter.

[@bdot6100]

You should definitely do the k20a2 (typeS) oil pump since you already got the engine apart

[@skatejames]

Pretty sure the a2 and z3 use the same pump. They are almost identical engines unlike the a3 and z2 etc

[@bdot6100]

I had a k20z3 and it comes with the same pump as k24a2. Which is different from the k20a2

[@NovaZocket52]

With vtec there’s a pin that connects the lifters valve thingies... just look up donut media’s video about it

[@ViktorJ0van0vski]

Yupp those guys are teaching me a lot more than school does hahah

[@maxpeck6872]

The pin that your talking about basically engages the big middle lobe

[@NovaZocket52]

@@maxpeck6872 yeah I was tryna say that but I kinda forgot words 😂

[@scarab4655]

Imagine hitting the dislike button on one of Robbie's vids smh

[@daviddougan652]

Robbie getting everyone through the pandemic 🤙

[@Sneekyy.]

There's... A pandemic?? I've been too busy watching Robbie's vids I hadn't noticed wha?!

[@RAYtheram]

Your new content is heaps better than when you had the shop. You seem happier and showing more diy

[@lukelegg9915]

according to the vin the car was damaged in 2009... its been sitting for a while lol

[@mitchellsricemobile7668]

It’s also says it was a coupe

[@lukelegg9915]

@@mitchellsricemobile7668 2008 civic si manual coupe, 2 liter 4 cylinder I believe I saw

[@nedwhiting6033]

You should do another build series, this time with an outdoor carport/snow cover. Like a 3 bay garage with open walls and a sloped roof just to keep the snow from falling on top of the cars and provide shade in summer.

[@Dark-qt6te]

About the VIN thing, in some places, like Romania (where I live) you can't register a car if the block and chasis VIN numbers don't match so a lot of manufacturers put the VIN there

[@LuisAgabo]

On Honda engines like the b series the vin number tells you what Honda model the engine came from

[@stevejohnson2648]

Love to see it Robbie!! I’m in the process of rebuilding my 22RE in my 87 yota pickup. Love seeing you do the same sort of thing!!

[@DailyDotaTV]

Pause at 7:33 for a small lesson about vtec. the camshaft has 3 lobes for each valve. the outer 2 lobes push the outer 2 rockers under the camshaft for the short valve travel. as soon as you hit the vtec, oilpressure will shift a small pin and connect the outer two rockers with the inner one. the middle lobe is a lot larger than th outer 2 and pushes the vlave much further down. the more travel the valve is doing, the more air/exhaust flow you have. that results in more powa baby.

[@burnzzy3164]

Yes robbie!!! engine looks u real dude cannot wait for this build to start coming together !!! #staycomitted

[@NITSUD89]

The bottom stuff on the head is the "Rocker assembly" the cams push on one side of the arms and that actuates the valves, when vtec engages it locks all of the intake rockers with oil pressure. With that cam damage just use some emory cloth and smooth it out... It will be just fine especially for your particular build. If you were going for HIGH hp id say just grab a set of cams

[@keifer430]

You should store your cams and crank shafts vertically. They can warp!! Just an FYI!

[@Flavbean]

Glad to see you finally called G16! You won't be disappointed

[@joewhetstone3557]

You know man I’m storing my cobalt ss in my driveway with a tarp on it and seeing you have the genny and jasmine out just chillen in the snow without a tarp makes me feel way better about Storing it outside Thankyou!

[@zackkant6278]

PURPLE POWER! best degreaser ever!!

[@ethanrainsford4251]

Put some asphalt down there might grip up better than the dirt and seeing this k swap get built makes me more motivated to save to k swap my del sol

[@mihailpetrovici5044]

Damn, k swaped del sol?

[@NovaZocket52]

I have a del sol with a d15 I’m probably gonna b swap cus it’s cheaper ( I think)

[@ethanrainsford4251]

@@NovaZocket52 yeah i guess it would be but for what i want which is 200wheel an stock k24 with bolt ons would seem to be just right for me as i want something thats not a ballache to drive daily in traffic i was thinking about doing a b20 bottom end with a vtec head but by the time if done all the work and spent the money to build the engine i think it would be cheeper and more sensible in my oppinion to just do a k swap each to there own i guess

[@ethanrainsford4251]

@@mihailpetrovici5044 yeah aha would be amazing considering how it feels with a d series already

[@ethanrainsford4251]

Plus going on that the k24 will have a whole lot more torque too

[@McHenry_01]

Do a cement platform and bolt down the car garage top thing to the cement and just add similar tin walls to make it more of a sturdy structure

[@maikenpham1631]

Have the machine shop check the cam journal on the head where you found the scored cam

[@pinytenis420]

There is two cam lifts on one camshaft when rpms are high enough the ecu will allow oil to pressurize the roller rocker under the cam to allow the 3 roller rockers on one cylinder to become one big roller rocker with a pin allowing for the higher lift of that middle cam giving you the BWWWWAAAAA

[@eliasswierczewski186]

The progress thing is huge I think Robbie, that’s a fantastic idea. Really only organizations like gears and gasoline, throtl, and such can afford to wait for parts and perfect video opportunities because of all the people and projects they have. LOVE THE CONTENT MY MAN!!!!

[@craigscott02]

For the shelter with the snow just built an open area with a room ! Still open but roof overtop to prevent snow

[@rastapoepr]

One of your best videos in a while man! Keep this going progress is what the people want to see. I love seeing what you do keep it up bro!

[@CalebCutler]

Yo rob! Why don’t you just pave the driveway and plow it in the winter! That would be very convenient

[@TheBLDZRR]

Garage16 represent! Rick's the man

[@Cam_3019]

Build a carport for storage. And if your changing the cams you might as well upgrade them and your valve springs etc

[@MJ-qc1kw]

I’ve built my own. Fill a 5 gallon bucket with cement and have a 4x4 bracket in it, bury it just under the ground for whatever you size you want of each car, and repeat for however many cars you have. Just have all the front facing 4x4s to be taller than the back to have a sloped roof and boom. Pretty simple

[@017garage9]

Hey I did construction we used a sepific plastic mat and some carports also the portable garages you can have a person who cover boats covers those the same way

[@notverystealthy9165]

Robbie I’ve said this many times before. You are so under rated. I can see you blowing up major soon! Keep at it bro you are an inspiration. 😌

[@boostedlsej8401]

How VTEC works: oil pressure is allowed thru a solenoid to push a pin from an outer rocker arm to the middle rocker. If you look at the lobes you can see the difference in lift. P.s. get drag cartel drop in cams.

[@SERGMOTIVEGARAGE]

piece in the block is a coolant diverter, nice job 👍

[@jadenslackbrz2748]

Get a tin or metal canopy open garage thing where there is no walls but there’s a metal roof and metal posts to hold it up

[@KNZRauto]

black looks awesome but only problem is that it'll be soaking up wayy more heat than usual due to the emissivity.

[@MattytheKillaMilla31]

Robbie you’re an inspiration. You and Birdy always want to make me go and work on my car (bugeye wrx) and just stay motivated. I thank you for that. Edit: make sure you have bare metal where the starter bolts on so you have a good solid ground

[@smoothlover073]

You should put in car port that you can put on insulated tarp walls for the winter and remove or open them for the summer. Big enough to park 4 cars in it on one side and 3 on the other on into a L shape in front of the garage.

[@PedroMcMahon]

what about digging up and putting in geo thermal heating in the drive area outside the garage.

[@Nate6133]

also i would check the flatness on the head with a straight edge before you put it in. unless you take it to the machine shop.

[@not_flvcko]

Get some OEM 06-08 TSX cams. Those are the most aggressive OEM cams. Also recommend those since you are keeping a stock valvetrain. With aftermarket cams you’ll likely need to upgrade valvetrain and tensioner.

[@philipgagne1852]

V Teck killer cam! Setup get it!

[@tylerdonovan670]

You got to get that snow back as far as you can when you start blowing so later in the winter you have room

[@KiffW]

Build a lean to, a roof that goes over where the s10 and the genesis go and it’ll keep the snow off the ground and off the cars. Doesn’t have to be crazy big or anything but enough to keep th snow away and just be persistent with snow removal. :)

[@eddiebreelz4226]

Nice color combo on the motor.....

[@qmspeed208]

Ya someone’s def been in their that headgasket looks brand new ,and cams Probky are scored from oil starvation when the pan was struck

[@Sumo197m]

You could build a permanent structure as a car cover and have the ground be gravel with cement piles in the ground that you could then attach posts to and a solid roof

[@Cowger]

You should make/ get an open garage with a slanted roof like what they have at some apartment complexes it would help stop weathering on the cars and would last longer than other car covers

[@Caessr]

NEW VIDEO LETS GOOOOOO!!!

[@Saponiboy227]

I forgot the brand we’ve had our shelter for years now, but where the bottom frame rails lay on the ground, dig it out so it’s level, steak it down as you would normally, then cover it all with concrete and boom you’re done. In NC we get hurricanes, severe storms, and occasionally tornadoes and that thing hasn’t moved AT ALL keeping 3 cars safe

[@Saponiboy227]

Also add gravel to keep the whips out of the mud/dirt/snow.... we don’t need rust fam

[@NateDogg887]

Man that intro was so sick!!

[@kaleb4184]

Don't take my word for it, but I'm sure that part you were asking about on the head is the lifters that lock when vtec engages switches from the tamer cam profile to the larger, more aggressive profile. correct me if I'm wrong though

[@yamilmelendez2667]

Engine looking sick broooo

[@sethoeser510]

Keep up the good work homie!

[@AFXGaming]

Yo robbie, you could try building a little cheap ass lean tube to park your vehicles under, it would keep most of the snow out, and keep the sun off the paint too

[@TheOnyxRanger]

Wasn't expecting that color combo to look as good as it does, ngl. Sick.

[@Slim_Loaf]

This thing is going to be dope, can't wait to see it driving around

[@jacobkh]

That looks nuts

[@richierich9866]

Oil pressure goes through the rocker assembly pushing a lock pin that make the rocker ride on the bigger lobe of the cam. BRRAaAppp

[@the_1n0nly30]

Can’t wait to see how it looks once it’s done

[@JakeSullivanMedia]

Not sure what the temp is in your garage but it's a good idea to run a blow torch over any aluminium you plan on painting, helps the paint stick. Looks fun tho dude

[@noahtorrez1072]

Get an RBC manifold 70mm throttle body, port manifold sense your always looking to try new things , get some aftermarket cams sense your already looking to get some and a type s oil pump. Possibly drag cartel for cams

[@aaronmclaughlin2963]

You could build an open fronted shed for the cars

[@MarAnthem]

Build a second garage, specifically for storage only. Supply heating to it as well and boom. It won't be too expensive and would make life way easier.

[@TheCarnager]

You built a spray booth, now you could make a car shelter outta 4x4s! Stay committed! You got this!

[@porterscotty1]

Robbie please consider doing the k24/20 build on this motor, I’m in the process of mine. You’ll enjoy it 10x more!

[@porterscotty1]

And also get some 06-08 Acura TSX cams 👍

[@apoxis8467]

such quality... nice man

[@sebastianoliva1990]

Build a 2 covers, a 3 car one and a 2 car one, and you can use metal sheets on the sides and top

[@PT82]

Stick a K24 steel sump on it. You’ll buy a little clearance and it won’t smash to bits if you hit it on something.

[@harrykauf3741]

Build a carport and close it off on 3 sides so the snow doesnt blow in from the sides, and then your cars would stay away from the snow, or you just hang a tarp on all the sides to close it off enough

[@jordanengen3932]

Can't wait to do this for my s13 engine

[@subiefan8797]

Build a half-garage style thing for next winter

[@brandonford4877]

Would the can have clogged from low temps ?

[@symbik6189]

They sell car shelters with metal roofs & sidings. Unsure how big you can get them tho

[@Nevi_Savage]

Would you ever do a rwd conversion with the civics??

[@tdoucette8281]

For you cars you should built something like Taylor rays garage with beams a roof where there will be no snow.

[@alwaysgonewrong1711]

Hey Robbie idk if you mentioned u got this in your older video showing all the parts but you should get a k24 oil pump saw these guys make 600 hp on stock engine with a k24 pump on 30 pounds of boost lol idk if it’s totally safe but this ek is going to be a beast

[@stylecrew8962]

What’s the brand of the rust paint you used in the engine bay??

[@JoseHernandez-qq8so]

Robbieee!!’ K24 cams !!

[@charlesgendron9082]

Shipping container could be an option instead of the floppy snow shelters

[@kyler_tj4554]

“it smells like if toto grandmother smoked a lot” it’s probably hurt oil

[@AFXGaming]

Aluminum oxidizes, so a layer of aluminum oxide forms on the surface, same thing happens to my rims lol, I gotta polish them with mag polish every year to keep em fresh

[@SKRTskii23]

The influence you get from Casey is off the charts. 😂 That's probably what makes ur channel stand out!

[@SMD-si7fm]

Who?

[@ollyboy2001]

Courtney.....lol

[@ViktorJ0van0vski]

Damn thanks for making my day better Robbie with the upload ✌️

[@dillannokes5206]

“Snow that’s to frozen into ice to snow blow” time for a metal edge snow shovel and some ice melt 😂

[@TooDiffRell]

What size is the crank pulley bolt?

[@jorgeantonio2809]

Yall got snow and a huge body of water 😳..

[@ZedJ2xU]

Port & polish mah dude ❤️

[@milosmiladinovic8404]

Hell yeah brothaa

[@Slumjacob]

Damnnn bro it looks hella good

[@TDLDIY]

What Paint did you use in the engine bay?

[@midwestjapan1716]

What you should do with that area where the cars are is put concrete on the area and basically make a small parking lot

[@OhhSooQuiikk]

Depending on the welds, I’d say the oil pan is probably stronger than ever 😂😂