Just a taste of some of the work we do in the shop!

I wish we could always be building cool hot rods in the shop all the time but that is just not the case. So here is a taste of some of the other work we do!
================================================================================
Rivet Nut Tool link
amzn.to/49taDDn
Rivet Nut link
amzn.to/469eWko
*As an Amazon Affiliate, I earn from qualifying purchases.
================================================================================
🔔 Subscribe for more / hardcorefab
Visit our website: www.hardcorefab.com
Visit our TeeSpring Store: hardcore-fab.creator-spring.com/
Thanks for watching!

[@RedDogMotorsports]

Can't always be glitz and glamour. Gotta pay them bills. 😅

[@HardCoreFab]

Sad but true!

[@johnmccanntruth]

Thanks for brining us along, that was a nice sign design.

[@vicgustafson8514]

It's a good thing to have side work to fund the builds. I like seeing the real side of the Utube business.

[@bradeastham5494]

That’s a monster of a sign appreciate the work that goes into it.

[@HardCoreFab]

Thank you!

[@normabrawner4881]

Great job you do Awesome work.

[@MarkSmith-ru7lu]

there's a lot of car videos out there it's nice to watch different things being made after all you a fab shop so why not lol love them signs thanks

[@mackhopper]

I love when you say, “we are going to step out of the norm,” as you stand in front of that maniacal clown mural. LOL Not a car build, but still cool!!!

[@HardCoreFab]

Lmfao I didn't even thank about that but yeah...

[@RuggedArtistry]

I very much enjoyed this video. I'd like to see the finished product after it has been installed at night with the lights on. I'd like to see more of the rust repair on that 80 to 86 Ford truck bed as well. Keep up the good work!

[@HardCoreFab]

Thanks! I'll see if I can get a picture of the sign when it is up. I have no idea when that will be since I am not doing that work. As for the rust repair, it is now all done, and we are just looking at hours and hours of sanding to smooth the rest of the truck out.

[@jeffs4690]

The reality of life have to pay the bills. All your work definitely quality be it signs, small projects, or the big builds!

[@HardCoreFab]

Thanks!

[@hankpugh4980]

My favorite videos are your metal fab. I would like to see you do a roll cage like you did with the ATV you built. May not be for everyone but how you layout and bend round tube is so interesting. Especially the layout and how you figure where to bend and fit the pieces together. I helped build quite a few hobby/ street stocks and drove many years ago but we bent crap on or around anything we had access to. We were knucleheads back then but thats how we taught ourselves. Im a geezer now but sure enjoy fab videos.Continued success and I enjoy the Rust Life channel too.

[@HardCoreFab]

Thanks Hank! I've tried to do some tube bending videos and it is hard for me. I mostly just eyeball it and I don't have any fancy tricks or tools really. So on video it looks like I'm not really telling the truth about how to do it. At least that's the way it seems to me. That was a while back maybe I can do better now at explaining. I'll give it a shot again one of these days.

[@hankpugh4980]

I sure understand and respect that. I would imagine that would be quite tough to explain how to do it and and show how its laid out after your above answer,you just know and from past experience. You just kind of figure it out.@@HardCoreFab

[@rickm5806]

Great job Anthony! I am currently building a Studebaker Truck Rat Rod, and the rivnut tool has gotten me thru a lot of the "what the heck am I gonna do here" moments.

[@HardCoreFab]

Thanks! Yeah handy for sure!

[@impalaman4546]

Great video thanks for sharing 👍

[@HardCoreFab]

Thanks for watching

[@cadillacdan3404]

I kind of need to get one of those tools it's been on my list

[@HardCoreFab]

Handy for sure

[@gregorycatren3442]

You could also use those to make a bad ass fence

[@HardCoreFab]

We have done some of that as well

[@chuckster6513]

Hey Anthony, Nice for you to have a plasma table that big to do large projects. My pop rivet tool is like the first rivnut tool you showed, it requires some serious finger strength when you do large or metal rivets. I have seen a few videos where guys used the "Unnamed" style tool, they seem to be awkward to use. I have a Rivnut tool that uses a common 3/8" drive ratchet and works like a champ with minimal strength required to pull even a steel nut for up to a 3/8" bolt.

[@kencornine8787]

Great job man! Can’t wait to see you guys at the Bad Apple Bash in Daytona!!

[@HardCoreFab]

We can wait to finally get to check out your show!

[@DependableAutoTruck]

Great video as for me i like seeing what it takes to keep a shop going when between videos. i have thought about getting a plazma table and try cutting for people haven't checked around yet to see how many they are in the area

[@HardCoreFab]

If you can make it work in your area I say go for it. There is a bit of a learning curve but it will change the way you build almost everything in the shop.

[@johnkranz4004]

Very nice work Antony

[@HardCoreFab]

Thank you!

[@RusThompson]

We have to pay bills so fun stuff is put aside. My shop is full of small concrete drums, now comes assembly. I haven't touched my Impala in close to two months. I'm frustrated

[@HardCoreFab]

I get the frustration!

[@garyparker2969]

I Personally Would've Added a Waterproof Strip Between Frame & Back Panels. Very Nice Work Otherwise Brother God Bless 🤗 Gary.

[@HardCoreFab]

That will happen after the paint

[@garyparker2969]

👍👍

[@hailrazr786]

cool

[@user-nv1sz3ld4x]

Anthony,the plasma work was of intrest.I have been using an air operated rivnut gun,works well,they are around aus$70 here.

[@HardCoreFab]

Hmm cool I haven't seen a air operated one.

[@kennyphillips8603]

Good video. Help me see what your work life really is. Not j7st out building cool stuff

[@HardCoreFab]

Thanks 👍

[@chrissweet6298]

WoW never nowed Al dat 💤