Just using my saw

  Рет қаралды 262

Anderson Woodworks

Anderson Woodworks

Күн бұрын

Пікірлер: 5
@Kewlosh
@Kewlosh Жыл бұрын
In woodworking and carpentry, hand saws, also known as "panel saws", are used to cut pieces of wood into different shapes. This is usually done in order to join the pieces together and carve a wooden object. They usually operate by having a series of sharp points of some substance that is harder than the wood being cut. The hand saw is a bit like a tenon saw, but with one flat, sharp edge. Hand saws have been around for thousands of years. Egyptian hieroglyphics exist depicting ancient woodworkers sawing boards into pieces. Ancient bow saws have been found in Japan. The cut patterns on ancient boards may be observed sometimes to bear the unique cutting marks left by saw blades, particularly if the wood was not 'smoothed up' by some method. As for preservation of hand saws, twenty-four saws from eighteenth-century England are known to survive. Materials for saw blades have varied over the ages. There were probably bronze saws in the time before steel making technology became extensively known and industrialized within the past thousand years or so. The most popular material for handles of hand saws is applewood; in the early 1900s 2,000,000 board feet of applewood were used annually for this purpose. Sometimes cultures developed two main types of saw teeth: the cross cut saw teeth and the rip saw teeth. These cut into the wood using different mechanisms. Wood is composed of many long cells running length-ways. Thus, crosscut saws have sawteeth that are usually shaped, often with a metal file, in such a way that they form a series of tiny knifelike edges. The wood cells are contacted by the knife-edge of the tooth and cut. Rip saws, on the other hand, are usually shaped so that they form a series of tiny chisel-like edges. The wood cells are contacted by the chisel and 'ripped' apart from the bundle of other cells. It is common that people do not recognize the difference and use saws both ways. However, a rip saw is much faster than a cross-cut saw when cutting with the grain but leaves a very rough cut, often with splinters on the surface, and has more difficulty maintaining a straight cut when cutting across the grain. The cross-cut saw can cut in any direction but is much slower than needs be when cutting with the grain. The development of saws was also affected by several factors. The first was the importance of wood to a society, the development of steel and other saw-making technologies and the type of power available. These factors were, in turn, influenced by the environment, such as the types of ores available, the types of trees nearby and the types of wood which was in those trees. Finally, the types of jobs the saws were to perform was also important in the development of the technology. Among Basques and Australians, traditional hand sawing has generated rural sports. The Basque variant is called tronral.
@andersonwoodworks9631
@andersonwoodworks9631 10 ай бұрын
Wow
@Kewlosh
@Kewlosh Жыл бұрын
I’m glad I “saw” this in my recommended feed.
@Kewlosh
@Kewlosh Жыл бұрын
I “saw” my mommy kissing a man that was not my daddy this morning.
@alexpinca2163
@alexpinca2163 Жыл бұрын
I'm here before this video blows up
The New Age Of Woodworking
46:23
Pedulla Studio
Рет қаралды 523 М.
Expert Woodworking Tips: From Design to Finishing
15:06
5-MINUTE REPAIR
Рет қаралды 6 МЛН
ЗНАЛИ? ТОЛЬКО ОАЭ 🤫
00:13
Сам себе сушист
Рет қаралды 3,7 МЛН
小丑揭穿坏人的阴谋 #小丑 #天使 #shorts
00:35
好人小丑
Рет қаралды 29 МЛН
CAN YOU DO THIS ?
00:23
STORROR
Рет қаралды 44 МЛН
A type of sanding block that can be tensioned
10:03
Ohyo56
Рет қаралды 308 М.
I Built an Automated Saw Blade Sharpening Tool
13:22
Well Done Tips
Рет қаралды 388 М.
THE BEST DIY WOOD steering wheel video (And it cost $0.00)
15:28
StoneFace Garage
Рет қаралды 335
Maple and mahogany Bookshelf making
36:49
GR Woodworking
Рет қаралды 476 М.
Melting Copper Wire Into a River Table
16:53
Burls Art
Рет қаралды 1,9 МЛН
Woodworking Tricks You'll Actually Use || Up Your Woodworking Skills
23:58
Bourbon Moth Woodworking
Рет қаралды 355 М.
HYDRAULIC PRESS VS MOST EXPENSIVE TOOLS
36:40
Crazy Hydraulic Press
Рет қаралды 128 М.
Hand tool tutorials; buying, restoring and sharpening a vintage saw
20:24
Shaker End Table Making - Hand tool woodworking
21:26
GR Woodworking
Рет қаралды 165 М.