New Channel: www.youtube.com/@Just_Print Buy it here: geni.us/yFt7uJ Recommended: geni.us/JustVlads
@StatMnd2 жыл бұрын
I watched this video maybe 20 times before I put my printer together, the information you shared is invaluable, especially the bed leveling. That alone solves so many problems.
@XanderNotZander2 жыл бұрын
Tip for any new users levelling your bed, for any big adjustments to the bed move whole sides so two wheels at a time and then only do fine adjustments one wheel at a time, this will prevent your bed from warping and twisting and creating an uneven surface
@Coffeefullcup Жыл бұрын
Thank you KZbin algorithms. This was in my list of videos today. I'm a 60+ newbie taking a plunge into 3d printing. Happens that this printer should arrive in about 40 hours. Thank you this was the clearest informative setup I've seen. I'll be reviewing this many times and have it handy when I get it in gear and assemble it. Nice job thank you.
@keilarangel56972 жыл бұрын
Bro, cannot thank you enough. You got me setup and printing in no time. Thank you for this video! Have a good day.
@heinzpilot2 жыл бұрын
Best video yet on assembly! Thanks! Ordering mine today. My first 3D printer.
@andrewsobek23862 жыл бұрын
Thanks for the video! It's extremely helpful for setting up, tuning and running the LK5 Pro, so much so that a beginner like myself can get it printing! I noticed numerous parts of the video were outright not even in the instructions whatsoever, including the axis tolerance adjustments, adding filament, how to use the printer UI, etc. I think these is what takes the LK5 from a cheap knockoff to an inexpensive but usable printer. Therefore, it's sad that the instructions skip these. Also, the instructions do a pretty poor job explaining how things go together (I'm a Mechanical Engineer and it still took 3 tries to get past step 1, with just the instructions mind) with weird pictures and plenty of chinglish! For your extrusion issues, I recommend checking the wire connection at the extrusion motor. Mine was poor-fitting, and caused numerous no-printing issues. I wonder if you are hitting some issues with poor extrusion motor connection yourself!
@Chris-pd4gz2 жыл бұрын
Thank you very much! I'm having the exact printer, but I'm an absolute beginner in 3D printing. It helped me quite a lot to get my machine started and perfectly leveled.
@rivetingsteak59882 жыл бұрын
How does it go with 3D printing!
@Chris-pd4gz2 жыл бұрын
@@rivetingsteak5988 Hey there, pretty good! I'm very impressed by the printing quality and especially by the print bed. As mentioned in the video, the parts are released effortlessly after they've cooled down. Just keep in mind to go slowly with your speeds. I think with a second z-axis stepper it could be more stable. I've attached a bl-touch to it and replaced the stock cooling duct. I'm glad to have this printer! It's an absolute recommendation for that money!
@Chris-pd4gz Жыл бұрын
@High Octane Hi there, Check out, if all the screws are tight. Then check if your end position contact needs to be adjusted. ( z- axis ) Last step is to check your rolers from your bed. The ones underneath the bed. Therefore you find plenty of tutorials on KZbin. Just search for rollers adjustment or end contact adjustment, etc. And don't worry, 3D printing is a lot of fun, but you gotta learn a lot too, to get everything running smoothly. Good luck! If you have any further questions, just text me. If you want, I can do some short clip for you, where I show you my printer and how I fixed those issues. Best regards!
@cvltxmedia2 жыл бұрын
Dude.... I can't read and I can't pay attention WHEN I read, so I thank you LOADS! I just followed your step by step guide. I know you just read it and stuff but I'm a super visual person so thank you for being here with this.
@JaboodyEnthusiast2 жыл бұрын
It took 4 months letting this machine collect dust in my room before I realized I could get help on KZbin 😂 thank you man
@oldfart832 жыл бұрын
Thank you very much. Brand new to 3D printing. You video helped me set it up. Was lost without your help Just finished my whistle. My printer came with fan cover, which is now printing. Just wished you had touched on Fan Speed, Feed Rate and Nozzle Flow settings. 82 years old so not some young techie.
@julianuga Жыл бұрын
I've been running my elegoo neptune 2 into the ground for the past few months and it's high time I get another printer. I bought this one since I wanted a larger scale printer. Comes in the mail in a few days. Can't wait!!!!
@lanthanien10 ай бұрын
Thanks for the walkthrough. Answered some questions I had before giving the printer a try. Seeing the results you got is encouraging.
@alberdw19853 жыл бұрын
FYI that Processor said ATMEGA 2560 that is an 8bit processor
@tspaziovirtuale36152 жыл бұрын
Thanks, today I built my machine with your help. Still it needs bed levelling but overall it seems ok Thanks
@ChrisMeans2 жыл бұрын
Great video. Watched it a couple of times before I tackled assembly. Very helpful. I also purchased a Logitech C920 camera to capture the renders...any suggestions for a good mount (3D print or otherwise)?
@jaymevanderwege Жыл бұрын
Great information and very easy to follow. Thank you for this video.
@BurgerKing-jg2ek Жыл бұрын
I'm thinking of getting this thanks!
@TheOuterDrive Жыл бұрын
Thanks man!
@s8nlx6613 жыл бұрын
Surprisingly impressive
@jojohnny4386 Жыл бұрын
Congratulations for the videos are very nice You can have the octopus file,! Thank you
@glendever90933 жыл бұрын
I’m totally new to this, what about the computer connection? Is there an disk to adjust or design?
@noeygarza65223 жыл бұрын
Just Bought the Longer LK5 pro, coming in today from Amazon. 7/18/21
@robertavalos55842 жыл бұрын
How has it held up? I just finished assembling mine and printed the whistle. It came out great.
@OscarOliu3 жыл бұрын
Gotta tell ya, originally didn't like your reviews, but after looking at so many, you really are one of the best reviewers.
@makewithmegma3 жыл бұрын
I want that rocket😂😍👌🔥👍
@Conceptsexplainedsimply3 жыл бұрын
Where do I learn what to look for and what settings to change so I can get my prints to be super nice? I just bought the LK
@madness68043 жыл бұрын
i wish i had a 3d printer they are so cool
@peter55433 жыл бұрын
Thank you so much for this video!
@apache-0verkill2 жыл бұрын
I'm new to 3D printing. This is the first printer I ever bought. Right off the bat, nothing sticks. There is overflow from the nozzle as it is loading more filament. It just doesn't stop flowing! I was able to print the filament guide that came stock but anything else nothing sticks to the bed. Any thoughts that could remedy this issue?
@TheKatz2u4 ай бұрын
Where does the filament guide, detector and coupling go? It's all in one bag and no where in the instructions, one item looks like a little switch.
@alonsotristan3938 Жыл бұрын
Thank you
@melannieworld3 жыл бұрын
I just got this printer did a test and the first layer coming out is thick, it making it hard to separate the whistle from the first layer. Any advice on how to adjust that? I broke the whistle try too..
@Skully8998 Жыл бұрын
I got the new model of this on the website and some of this stuff is totally different. I gotta find a new video.
@virtualspaceoft35012 жыл бұрын
Some said this printer has some heating hazards like over heating and so I am in the moment of building and benefiting from your video. How can I check if there is a potential heating problem? Do I have to go all the way to try days of print to figure it out if that happens to me or my printer has the same issues? Do you have some suggestions thanks I can share that review that I saw in the amazon lately I really feel confused and upset because I like the machine a lot but I am not a expert to figure out potential failures.
@ClovisX Жыл бұрын
I bought the longer LK5 Pro a few months back and today I finally had time to assemble it last week I got everything together with no problems easy stuff, but I have A big Problem. (Please Help Me) Problem: Step 6 says the Z-axis limit switch installation height is flush with the upper edge of the white label [[Problem is there is no label on mine!! I need to know how high the Z-axis limit switch is supposed to be from the bottom of the left side of the gantry because "there is no label" I will subscribe to anyone that helps me get this information because I have yet to get a reply from customer support on this matter. you can send information in mm or inch.
@Tech______8 ай бұрын
For some reason mine struggles with small stuff idk if its the settings or tempheratur or humidity
@soundlife4128 ай бұрын
Hey does anyone know why I keep getting the Error 4 bed max temp error after start up. It’s brand new. I checked all the wiring and it looks fine
@jvegazorro Жыл бұрын
Hi. I want to buy this printer and at the same time a Kit to duplicate the Z axis. I have seen several but I don't know the length of the vertical screw of the Z axis that comes with the machine itself. Could you tell me what the measurement is to buy the correct one? Thank you so much. 😀
@miketrotta93448 ай бұрын
Watch out!!! The metal clips will potentially destroy your bed heating element! It just happened to me after 1 month and only removing the glass plate 3 times! I just soldered a jumper wire to limp by for now. Print your own clips. Immediately remove your metal bed and look underneath!!! Trust me!!!
@jasenking40922 жыл бұрын
I followed you on the assembly of the LK5 pro and I did everything like you until it came to printing. I am unable to print anything 3 hours after finishing the assembly of the printer. I can not get anything to stick to the bed. I tried using the default settings. I have no idea what is wrong with my settings.
@virtualspaceoft35012 жыл бұрын
Have you figure out the problem? just curious
@RedCrafting1013 жыл бұрын
I want to get the ender 3 pro
@Quadd12343 жыл бұрын
Which one is better between the two?
@RedCrafting1013 жыл бұрын
The ender 3 pro is more for if you on a budget but if you have the money then the LK5 Pro is better
@mikeyboy31752 жыл бұрын
OK. I may be missing something but I have absolutely no idea where to put the SD card. Where you show it you might as well turned off the camera
@5lumpgotti2 жыл бұрын
I need help . Everytime I home it it goes up and doesn't move to the left instead the PLA comes out and tells me to Restart the Printer .
@ChrisSmith-il5qe Жыл бұрын
Just started using this printer and I have no idea how you pull your prints off so easily. I have to fight to get mine off. What did you heat your bed temp to? Did you put anything on the bed before printing?
@regis18763 жыл бұрын
Hi thanks for the review. I have the same printer. I am a beginner in 3D printing. I have problems with the rafts. They stay sticked and I can't remove it. Can this have something to do with my filament ? I am using Tecbears black filament
@chrisstearns87733 жыл бұрын
Can it print PLA+ ? And what other filaments can it print
@itsTHEFIREDOG2 жыл бұрын
I noticed in the settings that the fan speed is at 0 .... do I need to turn that up at all? or should I leave it on the default setting when doing prints
@StatMnd2 жыл бұрын
atleast 70
@anomicxtreme3 жыл бұрын
I just ordered mine, 3rd video I seen that mentions lack of the 2208 on the extruder stepper. Is the individual drivers changeable on the mainboard? I'm going to see about upgrading it.
@chrisstearns87733 жыл бұрын
Can it print PLA+ ? And what other filaments can it print
@rhamrzayi4233 жыл бұрын
yes easy print pla+
@dantheplasticman97422 жыл бұрын
Thanks for the video, I followed the steps like you did but I'm having an issue. My filament won't stick to the print pad, can you provide assistance to get this sorted out? I tried to print the included cube file and wound up with a glob of material around the extruder.
@itsnachodaddy2 жыл бұрын
its been a month so hopefully you figured it out, i just expierenced my first print as well, same issue as yourself, but I pumped up the nozzle temp to 210 and the bed to 65c. It came out perfect and im having better results on my next prints as well.
@cobraninja29683 жыл бұрын
I purchased one
@BoramorGamer3 жыл бұрын
i am going for the Biqu b1 :)
@DK_19813 жыл бұрын
Wonderful Video!!!!
@Jeff756843 жыл бұрын
Can you do a review of the ender 3 max
@JustVlads3 жыл бұрын
Coming soon
@presidentvampire19393 жыл бұрын
where can you get the file for that rocket please?
@yurushii2 жыл бұрын
I love this video!! Thank you for this!! I'm getting this as my next printer!! Is this the original or upgraded version?
@keilarangel56972 жыл бұрын
He's using the original. PLEASE get the upgraded version. If you don't, among other things, you'll have to order a new cooling fan assembly to get the job done right. Or 3D print one.
@yurushii2 жыл бұрын
@@keilarangel5697 thank you. My baby is using stock parts and it's printing well. The only thing I've changed was the nozzle. I'm printing out the thunder tank right now!! Yeah BABY!!
@nathanxcz2 жыл бұрын
very helpful!
@Snailmailtrucker11 ай бұрын
Is it true that this 3D printer doesn't print Carbon Fiber Filament ?
@mementomori83372 жыл бұрын
What size filament does it take ? I haven’t been able to find the answer to that
@yurushii2 жыл бұрын
Same as the ender 3. 1.75mm. All of your ender 3 upgrades with tubing, springs, metal extruder brackets, etc. fits on this machine. Question answered. 👍🏾
@RCjunkie3 жыл бұрын
I went to Cura 4.8 and can not find the longer LK5 pro, help
@killz52283 жыл бұрын
Can you review the Anycubic Mega X
@combobreaker132 жыл бұрын
How do you unclog the filament tube on this?
@MikRUSSIA2 жыл бұрын
Привет Влад! Выложи пожалуйста ссылки на модели игрушек. Тоже хочу напечатать такие! P.S.: Твой сайт не открывается :(
@gillandro22 жыл бұрын
I am curious... i had a sculpto 2 which had a scaler in the app for it.... i was printing an optimus prime at 185%.... how would i scale with this one?
@mikedixon15282 жыл бұрын
You should be able to scale using whatever app you use fir splicing. Cura for example has a "scale" option in the bottom left when you are setting your splicing options.
@luisgamboa49863 жыл бұрын
I’m having problems leveling my bed for my ender 3pro any suggestions?
@dehamilton79783 жыл бұрын
Try the chep bed level g code
@chrisbiggers28622 жыл бұрын
I printed the whistle first, as you did. Tried three times before getting it to stick past 5 minutes. After I got past that issue, every time the ball in the middle gets halfway, it breaks off before the print is finished. Any ideas how to remedy this issue?
@Loksmiff Жыл бұрын
Did you figure out why this was happening?
@chrisbiggers2862 Жыл бұрын
@@Loksmiff I didn't. Sold the 3D Printer. Too much of a pain in the ass.
@nickmeskens30623 жыл бұрын
Hey could you do a Wanhoa D12 review 😀 I have one and would like you view on it 😊
@natedogfisher9408 Жыл бұрын
My printer is only able to level on one corner.
@f.johnson22473 жыл бұрын
2 or 3 times, I did something or tried something you mentioned, then, immediately afterwards, you said "No, actually, I just realized it needs to go this different way." That is a real pain. Could you please edit out the mistakes and do-overs? Examples at 16:19 with the wiring. Otherwise, very good.
@jaspergeerdink41073 жыл бұрын
Can you review the cr 10 V3/V2 plzzz
@wrld3D3 жыл бұрын
It's not completely up to him. It's partly up to company's.
@synta_ Жыл бұрын
So question yu dont really need a computer for this. All yu need is a USB for the files to print.
@LegitLeeVelez Жыл бұрын
yes you only need the computer for the g code files that you would get from cura when it is done slicing the stl file and then put that file on to the sd card and put the sd card into the printer. I hope that helps you and answers your question.
@robertzawasky545 Жыл бұрын
my screen actually not lighting up on try 2 lol
@stoklasajiri24263 жыл бұрын
nice printer but dont have dual Z ..
@kenny84983 жыл бұрын
Are you still using this printer?
@quantummagazin50403 жыл бұрын
one question, how many printers do you have at home ? :D are you collecting all China 3D pritners ? :D
@theidiotbros41292 жыл бұрын
I counted all of his videos that have 3d printers in it he has 88 3d printers Not including resin 3d printers
@ThatWraith2 жыл бұрын
So many out of order steps and using screws wrong..
@dylan-nguyen3 жыл бұрын
FYI this is $60 off on Amazon rn.. $340 😳
@natedogfisher9408 Жыл бұрын
My printer will not level
@Sebazzz19913 жыл бұрын
8-bit board and Marlin 1.1.9 in 2021? What a load of rubbish this printer is.
@themountain593 жыл бұрын
well...it depends on the price and the performance . Not everybody needs 32bit board
@Sebazzz19913 жыл бұрын
It is just about performance (although that can also be thought of given the Cura 4.7 and higher maximum resolution settings). 32-bit boards have generally more flash space and RAM.
@Mrshane288 Жыл бұрын
Unit is junk. Owned 3 weeks and many things are popping up. Finishing long prints is a crapshoot. Bed adhesion the same. Honestly the first few prints were ok but after that the horrible quality of thus machine has begun to show itself. Im in the midst of working to get a refund.