LLY DURAMAX GETS EVEN LOUDER... AND FASTER! | HSP DELUXE MAX AIR FLOW BUNDLE |

[@JWMontoya]

"JWMONTOYA" at HSP will get you 5% OFF! CHECK OUT THESE VIDEOS THAT HELPED ME OUT: Y BRIDGE INSTALL: bit.ly/3q3D2Im AND bit.ly/3uFFjNp TRUCKMASTER INSTALLING HIS HSP DELUXE KIT: bit.ly/3b2IM0D HSP THERMOSTAT HOUSING INSTALL: bit.ly/37WDeTq

[@dccarmona7275]

Where u get it all the parts ? U have any website or store specific?

[@antnope3042]

Hey, just wanna let you know you bought the wrong thermostat. The high temp one is supposed to be a higher temperature. You were supposed to buy the low temp thermostat that is the one that you want.

[@duramaxfocused2112]

I was just casually watching and I was like hey that’s my video lol. So cool to see it helped you out!

[@JWMontoya]

Good stuff brother!

[@nemesisn4sir242]

Podcasts and audio books are a godsend to staying calm while mechanicing!

[@mrmotofy]

Just some helpful info on the job, some is LMM specific but very similar Most of those vids you see, are older models the, LMM have all kinds of stuff in the way. The coolant line in back to heater core is 5/8" ID and can be a Gates 18743 U formed The coolant line down there is 1/2" ID and a Gates 28460 is a formed 90 deg for about $9 on Amazon. I used 5/16' fuel line also but the sharp bends kinked the hose. So as a good recycler I found an aluminum pipe that was attached to something that fell off under the truck one day. It's a 5/16" OD pipe so a little pipe bender and trim to length and slide into hoses keep em from kinking Y bridge bolts are M6-1.0x25mm flange bolt. I always like to upgrade to Grade 8 when possible The Turbo is simpler with a 6 pt 17mm swivel/flex socket from a kit in stock at Autozone #62-850 $20ish. The Ybridge bolts are easier with a 1/4dr flex extension in a 2pc kit at Oreilly's

[@xDannyBeats]

Just picked up an LLY dually. Super clean too

[@SR-tc9gd]

Good info. Love the LLY content. My LLY will soon have the HSP kit and Ryan’s 66mm turbo. Can’t wait!! Under hood light kit will be awesome.

[@thelifeofmatt0306]

I did the same thing when I installed compounds. I take tube backwards and MAF sensor backwards. Who knew air was only meant to flow over that thing in 1 direction lol!

[@Zach_Handle146]

Needs to be a relocation kit for those wiring harness clips haha. So obnoxiously located

[@florianreinhart6438]

Man the whole truck looks awesome love the new HSP set up

[@mondo9.2.5]

cant wait for the L5P to be whistling loud and proud

[@zackk695]

If they don’t provide you with an oring they could simply provide you with the factory oring. Either way you should be putting a new oring on that Y bridge

[@shaunmcdank1871]

I was wondering if the port on the pipe coming off the y bridge is just supposed to have a plug in it? I noticed theres not a sensor or anything to go in there and im getting ready to put mine on.

[@willbutts2567]

I’ll say it... I’d take the LLY over the 2020

[@6_Literpapi]

Lly and ls3 yessir 😎🤘🏽

[@dsmoke919]

Just sold my 2020 and got a 06 lbz

[@DrSnuffles]

@@dsmoke919 I’m literally doing the same thing. Selling my new f150 to go buy a fucking Lly 😂😂. I’ve always wanted to build a cat eye so while I can get the most out of my truck imma go buy an old cat eye.

[@ozziecrosby2092]

Absolutely!!

[@maryhoffman2547]

Inherited my farther in laws. After dealing with tractors and the new crap.

[@jp_followme9079]

Dude I’m putting mine on today but replacing turbo and engine wiring harness and rebuilding everything! Going to video it and thank you for your videos man

[@foxgdsmck]

do you know or have you done anything for the head gasket? would you do the head gasket or recommend just going ahead and doing the job just for assurance? i just got a lly and know the issue; but aside from the head gasket/stud and egr delete; it should be a bullet proof?

[@CCCC-tq8yo]

Where did u get the red plastic by the hood latch that's usually black

[@JWMontoya]

Just painted it

[@ramsandrzr3706]

Nothing better then wrenching on your truck while listening to the radio/podcast 👍👍👍

[@JWMontoya]

Yessir 👍

[@sosajojo08]

The truck looks sweet good job I've been following you for a couple of months now it's good to see you build that truck I am learning a lot by watching your videos thank you greatly appreciate you and truck master Keep up the good work I also have LLY Dooley 05

[@kdolezal7]

Will you have check engine light after this?

[@dmaxxd94]

What’s the lift and wheel & tire set up?

[@notyouravaragesavage1776]

Awesome video extremely informative and well put together. Much love Brooo

[@zackk695]

I pulled up your name and see videos but nothing on the removal of the emissions/EGR

[@ZackSway6.6]

2 grand for some piping and an air filter, crazy

[@jaydenturner9404]

I watched the same video in installing my hsp y bridge so helpful

[@MrGetToIt27]

I need that for my LBZ! Finally got it lifted

[@DuramaxKev]

Sounds awesome. Will be slowly doing the HSP pipes on my LML.

[@hardass912]

I did the entire HSP kit on my 16 LML....LOVE IT!!!

[@Heywoodthepeckerwood]

@@hardass912 I just ordered their Max air flow kit for my 14 lml. Can’t wait to slap her in.

[@hardass912]

@@Heywoodthepeckerwood ...you will not be disappointed

[@3gguy]

What hood liner do you recommend with three metal heat shared?

[@jp_followme9079]

Ready to hear mine with KC whistle turbo and hsp max air flow

[@rockinwitda6]

What happened to HSP twin turbo kits can’t find them on their website. From Canada is their a new law where you can’t do it anymore or something

[@aidanmunoz4681]

Where’s the blocker plate from?

[@zackk695]

So is all this legal? Hate to go try to get inspection and it not pass and have to put all that back on

[@sznghost]

I know im 2 years late on this but your truck was running warmer because the mishimoto high temp tstat is for trucks that are in colder climates and have issues warming up, such as mine. Mine maxes 180 in the winter and they run more rich when cold losing mpg. A low temp tstat would probably be better, make sure to look at temp specifications

[@sznghost]

Wow haha i didn’t realize you already corrected yourself. Sorry for the mansplain

[@redbeard5894]

Can’t wait to see the next video ! Good stuff , I need to the new thermostat housing from hsp for my truck

[@Camden-y7i]

I know this video is old but what brand radio are u running

[@builtbyme]

Love that lly content, keep grinding bro. 💪

[@VirusX_TTV]

What’s the mpg after getting this done?

[@specops1903]

Probably negative

[@cadeancealiff2229]

Keep these videos coming

[@technicaltrucking8704]

what kit is this? can u provide links to items

[@carsonsteeley1039]

hey man i just bought a lly and he has a sct 100hp tune he runs on the truck daily. is that okay?

[@nathanbills9428]

Is this stock turbo

[@mromero982]

Send me the kit you installed I can’t find it on the website

[@MGMCLL]

Hows the camber 1:52

[@Subi_doo]

Does that couch cushion go back on the couch when your done?

[@JWMontoya]

Lol no, I use it strictly for truck stuff

[@Subi_doo]

@@JWMontoya on another not, I just ordered a 2021 GMC Sierra 3500hd crew cab long bed AT4 with the L5P duramax, will doing the inter cooler pipes, and turbo mouth along with an intake get it the turbo sound back? I miss that sound the new diesels don’t seem to have

[@catalystsg645]

What color did you get ?

[@bigal50239]

Trucks awesome. 2 questions. What’s your exhaust set up and are you still on stock transmission

[@JWMontoya]

5” straight pipe and yes stock

[@lawrenceheinz2679]

Did you have any issue removing the upper rear left bolt from y-bridge? It’s the one behind the metal hose. It usually binds on the front of the turbo. Most have to cut the head off of the bolt. But most don’t admit to doing that. What did you encounter??

[@JWMontoya]

I used the flexible extension. Removing the bolts were actually all easy

[@mrmotofy]

Major pain on the LMM, have to loosen Turbo and pry to drivers side to get it out. In case you need one the bolts are M6-1.0x25mm flange bolt, I try to go grade 8 when possible

[@shawnmartin1841]

I am looking to do what you did on my 2005 silverado 2500hd so is HSP the product you recommend or something else

[@mrmotofy]

SDP has a better Ybridge or check Pusher

[@Girthimis]

Are your wheels 14 wide? Or 16?

[@micah6182]

What radio is in the lly, and does it work well?

[@hs2158]

Hi buddy, what can I do with the codes ?

[@ozziecrosby2092]

What kind of fuel mileage are you getting now?

[@joemills9878]

Have you had any issues with trans since adding all the upgrades?

[@darrelldevilder5706]

Have you removed the factory fuel filter with a kit while running the lift pump ?

[@JWMontoya]

Not yet. I plan to later

[@dequancoley14]

what stereo setup is that?

[@ELKOBRA03]

How much are the power gains 💥?

[@adamger12]

That rumble sounds so good!

[@sean7554]

Bought a 04 Chevy with an LLY as a project. Going to be buying the HSP Deluxe Max Airflow Bundle. Just not familiar with Duramax. Does that kit come with anything that deletes the EGR. Cuz I don't want to buy something that I'm going to have to take out later to delete anything having to do with emissions from that kit. Actually, that may be a stupid question. Considering you took some EGR stuff out in the video. I'm just going to go ahead a call them. Just heard LLY's like to overheat. Just want to get around to getting the truck breathing easier. Maybe upgrade to a better radiator. After that, I think she'll be alright.

[@mk7_nate970]

They took the y bridge out of the kit now for some reason

[@ozziecrosby2092]

@@mk7_nate970 .... Did they lower the price? Lol

[@mk7_nate970]

@@ozziecrosby2092 yea not buy a lot tho shits dumb I think it’s the epa on their ass Wc fab did the same thing with theirs can still buy the one with y bride off of other sites

[@ozziecrosby2092]

@@mk7_nate970 ... Yep. I bought the Y bridge about 2 years ago. If I remember correctly it was around 600 bucks. Made a huge difference in horse power.

[@DMAXROB]

Here in 2024 and I just paid 28k for a mint LLY in Texas

[@wolfx-wf7ku]

Just got my LLY zf6 in Cali for 9k.. mint.

[@DMAXROB]

@@wolfx-wf7kuI live in Cali and I sold my 04 FE9 lb7 for 20k for buy my LLY and maybe i should say my LLY in pristine, the original was ocd with it. But if you paid 9k that a good deal tho

[@smoknZ918]

Any dyno numbers for your LLY?

[@isaccmartinez6533]

How much was that kit?

[@theunknowntimkill1666]

How much hp are you pushing in the lly?

[@mattshufelt7670]

What did you use for a up pipe

[@JWMontoya]

Deluxe kit comes with uppipes

[@justusone1]

HELLO THERE MY WIFE CONVENCED ME TOO MOVE TOO CAL I HAVE O6 LBZ WITH THE CONVTER AND EGR OFF MY O6 GMC I HOPE IT WILL STILL PASS THE SMOKETEST IT ONLY SMOKES WHEN DOWN ON IT THANK U ALL FOR MY CONCERNS

[@dirtydirtbikeboi7394]

Where did you get your turbo from

[@JWMontoya]

Ryan’s diesel service

[@migs8428]

Is 16k a decent price for an 04 gmc sierra 2500hd 210k miles body looks clean nice red color leather seats 9/10

[@JWMontoya]

Yup

[@aronarreola7691]

Do you use a fuel rail plug on your lly?

[@JWMontoya]

I did not

[@therealsebastianarizpe1812]

Love the vids too!!

[@isaccmartinez6533]

Where’d you purchase this kit from?

[@JWMontoya]

HSP

[@bennunez6927]

why not just pull the turbo seems it would be faster or cause of lack of gaskets to replace if you were to rip one

[@johnthompson5409]

Went to find the parts and parts list...?? Found Nothing but tee shirts..??

[@sznghost]

Great video!

[@ronsearles3352]

Another banger!!!!! 💯

[@11Reaper9]

You did good lad!🤟🏽🤟🏽

[@jaredkempski]

EPA watching this like 👀 “....write that down, write that down!!!”

[@JWMontoya]

Write what down?

[@jaredkempski]

@@JWMontoya the Bluetooth egr cooler 🥵

[@jaredkempski]

Just messing with ya man Bc like it’s illegal lmfao guess it’s more of a Facebook group / forums joke

[@JWMontoya]

GM ran out of stock for me to get a replacement one. I was forced to do it

[@jaredkempski]

@@JWMontoya I hit a speed bump in my 6.0 and my egr fell off so weird

[@clintonpeters2801]

Inspiration. Love my LLY. Want to keep it as hobby, but they take a lot of attention. Plus……. I’m 57 yrs old. 🤦‍♂️

[@nyjoff-roading1184]

Stuck between blood and candy red for my victory red truck

[@sosajojo08]

I have a 2005 LLY My first diesel truck and I will never, ever sell it. I love my dirty mamax

[@fellers1983]

Help me! I have made this comment on truck masters page without any response...I have the same intake set up on my lly and it spools so slow.. that pulling into traffic is dangerous and hsp said that because I bought the mouthpiece with the intake it is actually a lbz mouthpiece and intake.. you can not buy a whole lly intake and mouthpiece and they would just sell me the intake tube but then I would have to get a stock mouthpiece... never was that mentioned to me when I bought the freaking thing and that is a lot of money spent..

[@JWMontoya]

Check for boost leak or your Mass air flow sensor might be on backwards like how I first did it

[@ronkirkham3410]

Free video man I've had a couple D-Max trucks I'm more of a 8.1 L big block guy but I'm looking into picking one up. This one's like good into the point about the product so thank you again. Look forward to seeing more about the under hood lights. Any other input is greatly appreciated, God bless

[@JWMontoya]

Check out my newest video. I have more info on the hood light

[@itzhamm9592]

Looks sweet brother!!

[@ThatGuyJayDub]

I get why alot of people love the Duramax but I can't lie my detroits not the fastest but it does sound really good and I don't have to worry about any emissions at all :)

[@smittys19daytona]

I know your young and are pretty focused on the looks and sound, it would have been nice to see more of the install and ultimately power before and after . it looks like a lot of work and money to dod it just for looks and sound and and now open to the smog police...

[@dsmoke919]

Where is this as a whole kit

[@JWMontoya]

I don’t think it’s available anymore

[@Brendon6.7]

What turbo you get ?

[@JWMontoya]

RDS 64mm

[@MsSkaterfreak]

Don’t throw the headlights away. I’ll buy them for my LLY I’m sick of my tinted ones! Let me know I have PayPal lol.

[@roderickdixon2428]

Looks good bro..... love that lly

[@lummaxjrlocklear7404]

Can't wait for the l5p 67 turbo

[@JWMontoya]

I will not be doing the stealth 67

[@tw8644]

Need a L5P down pipe install. 17-19. No where on KZbin!

[@rolandomartinez9299]

Wish I had ur truck😩 yk I live in ga😂

[@YoArteeSon]

The valley of tools under the y bridge.

[@omarcalzadillas7461]

Man beautiful

[@jamesherald5050]

Had to get a new phone someone stole my other one. So what I miss

[@jtwarrenjw]

I miss the LML 😪

[@clintonpeters2801]

Did my pvc reroute off your vid. Amazon piece.

[@samtuccelli384]

i joined at chapter one

[@joseg2477]

Notification squad 😈

[@rolandomartinez9299]

RIP - Iron man

[@ramggxduraggx9204]

Lemme have them headlights lol

[@andrewlawrence1169]

Really dumb they don't provide a new seal honestly.

[@spittinblack2228]

First comment