K Series Swapped 350Z Build Drift Car Build

Thank you for watching,
If you learned anything from this video.
Please consider following for future content!

[@gouinloud5850]

Congratulations guys, as far as I know this is now the third k swapped 350z. Hoonigan being the first and me being the second, now we have a third :). I've been collecting parts and researching for the swap for years now, If you have any questions feel free to shoot me a message.

[@gouinloud5850]

Hope you guys can get the stock pan to work, I tried a k20 pan with the cross member notched out but couldn't get the engine to sit where I wanted. I ended up using the tf works rwd pan but It has small issues clearing the sway bar. The way I have the motor mounted now, it has about an eight of an inch in between the pan and bar which rotates away.

[@2FIRacing]

If you're willing, I'm researching this swap as well and I'd love to pick your brain about how you went about doing it. Do you have an IG?

[@aidchristensen2000]

hey dude, i hope im not to late to comment. im really wanting to do this swap but theres no content on it. is it worth it in your opinion, my z has a blown motor and i wanna get her running... i just dont wanna put that vq back in her.

[@gouinloud5850]

@@aidchristensen2000 honestly man I couldn’t tell you just yet because mine still isn’t completely done. I’m still saving to order a harness from wiring specialties as well as a few other things. The engine is properly in the car so there’s really only electrical work and some small things left

[@ThatBustedVQ]

Seen a k swap bmw dct combo in a 370z on FB, and a few others with k swaps like a g35 sedan and 350z on Facebook as well. I’m surprised they haven’t developed full kits for this chassis yet like the LS and JZ

[@carloszapien9296]

the MR2 EPS can be ran as on/off I am waiiting on my buddy to bring his EF sedan over so i can wire it up. I have all the supplies to do and offer harness kits as well.

[@bike-hubanother1]

I had the J 35 in my hatch

[@craighendrix9719]

Wow Dennis looks different lol

[@cracklingice]

It really does suck how the k series engines can be dirt cheap and plentiful unlike the D16Z6 I need for my del Sol Si. But then the cost to install a k series engine is like 4 grand between axles, mounts, shifter, cables, electronics, AC and PS lines (it's a street car not a race car).

[@marshmower]

It's not 2003 anymore. I'd grab whatever would be available to do the deal. Time is the enemy here. Used parts MIGHT save you a hassle. I do not claim to know one single thing about swaps. Except things come in phases. It would be a nightmare to buy all the parts except for that one thing and then it's discontinued before you get the bones to buy it.

[@VRDIRTY]

Randomly stumble upon this video and found out you laos!? Subbed haha

[@dareansonesath2887]

Awesome video thanks guys

[@TboneWertman]

Very cool!

[@DatMuslimDad]

What motor mounts did you use

[@daskamu]

Where has dyi Mike gone???

[@randallbennett7608]

I am currently swapping a j35a4 into my 2005 infinity g35 coupe.....any thoughts?

[@TamarrionMartinez]

I honestly want to do the same thing.

[@randallbennett7608]

So far it's not terrible....I just couldn't do a K it needs to stay a V6 in my eyes......just a lot more simple of an engine, these rev-ups....damn! Gotta love honda for simplicity

[@TamarrionMartinez]

@@randallbennett7608 which is understandable plus a k20 could never make the torque a j35 does. Where have you had the most trouble with your swap?

[@randallbennett7608]

@@TamarrionMartinez the wiring. Trying to make everything work (with updates) damn can-bus

[@sopretty43vr]

what trans are you using?

[@puertoricanthug2012]

This is a J series not a K

[@roycelt9694]

Hey guys I got a name for the car k z 🤣👍🤪

[@sonyaanna4679]

HELLO ,BEST CARS ONLY ITALY ENGLAND GERMAN USA CARS , BUT NOT JAPANESE , BUT I LOVE JAPANESE PEOPLES. ;) 1 🇯🇵

[@royalracingtechroyalracing6128]

🛠👌🙏❤

[@dk_thejoker1733]

first comment

[@gb361TX]

@DEADBEATGARAGE