K20 swap dropped in! Wiring tutorial 1-13

[@6piston26]

Finally someone going the extra mile and going into depth!!

[@michaelgranville1733]

Best k swap wiring for EG that I've seen thanks for the video

[@gen3family305]

Best I’ve ever seen so far

[@gen3family305]

When you pull in the old engine harness ( those 3 ends) do you cut them off

[@ACGarage614]

Thank you man. I tried to be thorough.

[@ACGarage614]

Greg Nembhard you talking about the old shock tower plugs?

[@ACGarage614]

Greg Nembhard i just pulled them through and tucked them where the ecu normally sits

[@gen3family305]

Thanks v-much so is it ok the cut them out of the car

[@pasmuis]

ELD is your electronic Load Detection.

[@mattm2411]

explained charge harness good. thanks for video

[@Serpentis666]

Thanks for making this video! Helped me out quite a bit with the power wires.... much appreciated man!

[@jimhiscott2918]

This is why i went full fueltech and kwik wire. My alternator is one wire, no ELD

[@raymarklim6642]

Thank you for sharing this. Two thumbs up!

[@brokebrothers1848]

your videos are very helpful!

[@ariesvang6231]

Is the oem harness pretty much plug n play? Do you have to delete/remove any plugs from it or modify anything on it?

[@atiserrot]

did you change the chassis harness under the dash to one from a manual one ?

[@highonlifex7419]

I have a 00’ ek & wanted to do a k20a swap.. I can just buy the engine & transmission, hasport mounts, Ecu & fuel lines & it’ll be set to drop in? I was gonna get the k series level 4 afterwards

[@ACGarage614]

iRecklessGodd 25 yea. Just make sure its not a accord or tsx transmission

[@oUnknownSnake]

hows your swap going? ive been seeing a bunch of k series for cheap, just need some more information for when i do mine

[@abukawsar5357]

Hello sir. I need some help. Where I find k20 ecu diagram.

[@jamesrich2456]

What did you do with the old engine harness when you brought it inside the car?

[@Kiret123]

what about wiring in the reverse light?

[@beanb8156]

Nice love the video keep them coming

[@ginobocanegra263]

Best video out there ❤

[@kzgarage1697]

Great video lots of info

[@ericg1149]

Thank you 👍🎯

[@Noooci]

nice work. Keep up 🤞🏻🤞🏻

[@stinky15552]

@Aaron Chaoumphonekeokiengkai Thanks for the being in-depth just find your page got your self a new subscriber here.

[@creambuilt]

Love the tutorial. Got yourself a sub. 👌🏽

[@h23gsr10]

Bro my fuel pump wont stop priming lol did i wire wrong?

[@jeremyperry8047]

i cant find that hole for 02 sensor

[@eloyflores3231]

Hey Aaron do you have ig ? I wanted to ask you some questions about the wiring and fuel pump thanks !

[@ACGarage614]

Deliciousnesses

[@666Mr.T]

wheres the rest of the vids 2-13?

[@gbaxter5285]

In the middle of doing a k20 swap into a eg civic engine etc in mounts on 2 Ecus wired up with the loom but there’s 1 big spare plug on the loom it fires but won’t start any ideas?

[@rubenske091]

Cool channel

[@ACGarage614]

k24BeN thanks

[@budjesus88]

Where did u pull those first 3 wires- green -red green-orange green yellow.? Not the ecu side but the other

[@ACGarage614]

Bud Jesus what brand harness are you running?

[@budjesus88]

Ktuned tucked harness

[@ACGarage614]

Bud Jesus im not sure what wires you’re referring too. I only know those wires are on the ecu side. Not the driver side.

[@budjesus88]

Aaron Choumphonkeokiengkai the 3 wires u connected together u said check engine light codes n something else where did u pull those wire from

[@budjesus88]

Aaron Choumphonkeokiengkai send me a message on IG Budjesus88

[@JourneyDreamMovement]

ok and you k swap and keep the auto transmission for this swap?

[@Rouyat]

I planning to plant a K24A1 from a CRV manual in my Civic EK. Do you think I can use the harness for the swap?

[@flaboi404]

a bro wat state r u in ... if u in my area i pay you to help me on my kswap

[@santanaarmand]

I'm big fan of your videos, how much u charge to do a K20 swap on my eg d15?

[@ACGarage614]

Brian santana it depends whats needed to get the car finished. What parts are purchased etc

[@gsrturbo3786]

What conversion harness did you use. K tuned or hyrid racing?

[@ACGarage614]

Gsr Turbo ktuned

[@gsrturbo3786]

@@ACGarage614 gotcha

[@angelgarcia8396]

Do i use my original wire harnes? 99 ex harnes. I have a gsr swap but want to go k serious?

[@ACGarage614]

Angel Garcia if you go k series look for a 02-04 rsx type s harness

[@gsrturbo3786]

Does the k tuned conversion harness come with the o2 sensor connector or do you have to hardwire it in?

[@ACGarage614]

Gsr Turbo i believe it comes with it wired already. You will have to confirm with ktuned.

[@joshuadoe9541]

Had to put headphones on to hear lol

[@ACGarage614]

Jonis yea i was a noob when i was making these videos.

[@joshuadoe9541]

@@ACGarage614 Haha it's all good man still good info

[@MrRevto9k]

How did you wire up the coolant fan connector?

[@ACGarage614]

MrRevto9k dont need it if k pro is being used

[@MrRevto9k]

Aaron Choumphonkeokiengkai No I mean the fan motor power connector. Did you use the stock EG one?

[@ACGarage614]

MrRevto9k stock fan plug. Just exteneded

[@marior9077]

Where did you get the firewall plugs? Anyone have a link for those?

[@ACGarage614]

Mario R www.hondapartsnow.com/genuine/honda~plug~air~conditioner~91631-sr3-000.html

[@ACGarage614]

Mario R www.hondapartsnow.com/genuine/honda~grommet~washer~hose~91617-sb6-000.html

[@bseries8826]

My dude must be Lao or Thai with that last name 😅

[@ACGarage614]

B Series lao

[@zrrz8792]

Harnish

[@JDprospect]

Man i thought my last name was hard, you Lao?

[@ACGarage614]

Chris TOE Pher yes

[@kouher770]

Was this done with a oem rsx engine harness?