K SWAP GUIDE to your HONDA!

STORE : damnitboi.bigcartel.com/
PATREON: / hondastreetgarage
GET 5% OFF AT hybrid-racing.com use code "HSG"

[@brittonbrumitt]

I wanna do a kswap, but I'm trying to figure out who's money to use. 🤣🤣

[@HondaStreetGarage]

Best response I’ve ever heard! Lol

[@brittonbrumitt]

If I could sell this damn 98spec TypeR swap I could damn near get everything I need. Lol

[@stinky15552]

@@brittonbrumitt shouldnt have any problem selling it put it on marketplace and share on your IG

[@brittonbrumitt]

Update: typeR swap to be sold and picked up Saturday... Mark, you ready to Kswap another Integra? Lol

[@Bluekbizzel_gaming]

You and me both 🤣

[@extremesupreme4813]

Beginning of video: 00:20 Transmissions: 03:40 Wiring: 05:37 Clutches, Flywheels and Axles: 07:17 Shifter and Shifter Cables: 10:00 Temperature Sensor: 10:54 ECU: 11:37 Fuel: 12:13 Exhaust and Headers: 12:53 Cooling: 13:19 Mounts: 14:05 Closing: 14:53 Did a great job on that video btw.

[@Beezy_Builds]

Mad informative brother will be referencing this when I start my build

[@Colonel.Penguin]

Same here

[@michaelpalmer3694]

Very helpful, in the process of my swap now, many things you mentioned caught my eye an changed my plans

[@mustanguycm]

Thanks for the simplicity of this video. This is just what i needed. Good luck on your channel 👍

[@Busydadgarage717]

Awesome information. Not even half way through video and rethinking the idea to move from B to K in my EF.

[@zacharymccauley5345]

Mark back at it again with the good info

[@ralstoncarolissen4222]

Awesome vidz!!! Love from South Africa 👌

[@ADHDGOTME]

This video is so informative!! Thanks a lot thinking of doing a kswap soon

[@BruceLee-xp5fc]

Had to tell my girl I gotta watch KZbin when I saw you uploaded

[@WhatTheHe11isTHAT]

Absolutely fantastic video. Very informative and exactly what I've been looking for. Thank you.

[@garyweber195]

Great info on this vid. I’ll be using this many times more. Thanks for the video

[@righty-tightybuilt548]

Can you do one on H F swap guide into cd5 obd1/accord chassis.? That be the end of my worries on finally pushing through with my first swap since this video was so informative 👏 👌 👍. Almost want to k swap just cause this was so in depth. Definitely keeping this video in the saved archives

[@dudeman7157]

Man I miss my 05 type S. Clubrsx was lit back in day! Very informative video, gonna save it just in case.

[@jimhiscott2918]

Mark. Talking about my all time favorite car ever. I was in love with his 2 door coupe. Most beautiful car ever built in my book.

[@DevonishMurphy]

Damn dude I appreciate this info big time it’s hard finding these trans though I’ve been looking for a few months now

[@Brok3n_54]

just copped a k24 tsk enigne with about 50k on it ! cant wait to build this video will deff help me out!

[@trueno76]

It’s like you read my mind. I have a jdm b16a and due to new emissions rules in my county it won’t pass an emissions test due to it being obd1, rather than convert it to obd2 I would rather just put a newer motor in. So I decided to sell the b16a and use the money towards the swap. Thanks for making this video man!

[@minibikelife1062]

The right way to bleed the coolant system on a K is with a coolant vacuum purge and refill kit. First attach the kit to the radiator and it sucks all the air out of the system. Then 3-4 gallons of coolant in a bucket w/the vacuum refill hose in it. Turn the valve and it will suck up all the coolant from the bucket, done.

[@kazkirby9able]

Great information great video 👌🏽

[@Rodrigo-xb1dq]

Thanks for the info!! I appreciate you

[@BLUE-K]

Muy buen video Me gusto mucho tu informacion esta muy completa 👌

[@Rick-fs3ki]

Cool video thanks for the info 👍🏼✅💯

[@arsiega]

If I manage to do a K swap in the future, consider this the video where I got the most relevant info from.

[@kevinblain2896]

Great informational video

[@dylanschomer6301]

Patiently waiting for another video

[@brysonhatake1643]

I'm finally caught up bro. Good shit

[@bseries8826]

Don’t forget the pilot bushing for the auto k24

[@tommylyeah]

Doin' God's work, bro, many thanks.

[@jeffwilbert5073]

this video deserves at least 10x the amount of views it has…

[@toki89666]

Today I realized, man I haven't gotten a notification for HSG in forever. Where'd you go man? You alright?

[@charliekim577]

Very informative!

[@DirtDude117]

I would love to have a K24Z3 with a turbo in my caged RX8 track toy. Collins happens to make an adapter but the issue would be keeping CAN conversion for the RX8 body module.

[@fspecperformance]

Heeeeee’s baaaaaaaaaaack👀

[@Aantisocial80]

gracias for the video help to me alot 👍👍👍

[@luisfigueroa8149]

Great information 👍 what o2 sensor are you using for your swap?

[@grahamnostalgia1]

This video was hilarious, informative but hilarious

[@DrivenFilmsPhotography]

This is great. Now to source parts and a decent shell :)

[@jimmyescobar4518]

Going to build a prelude around this video

[@rndm7907]

u thing thiss will be hard in a 4th gen prelude

[@hersonvalle]

I’m learning 😮😊

[@josiahgagne6529]

I got a 2004 ex coupe, and the head gasket just blew. Any recommendations for an engine swap? I've read that any K series would work but I'm trying to get more information. This video was super helpful, thanks to anyone that responds!

[@Lukemasonmedia]

Me and my buddy are talking about going half and half on a build and he’s about to buy a k20A3 and we’re gonna do the A2 can swap, we just have to figure out what we’re going to put it in. This will be my first time ever building a car but he’s done Honda’s more than anything so we shouldn’t have too much trouble.

[@CoverCatz]

Hey Mark this is the other Mark down in Alabama. I know it's been a long time since I've talked with you but we just got a 2007 Honda Accord, because let's face it, Honda is the best thing on the planet. Recently got a check engine light on the interstate, then the car started surging as in rhythmic and in time. So you let off the gas pedal and ease back on it and the rhythmic surging tends to subside. P codes: P2646 rocker arm actuator control system performance/ stuck on (Bank1) Pending Then one other: 61-1 battery voltage malfunction Current So I reset all codes, cleaned both battery terminals put it back on the interstate and no problems as of yet but I wanted to bounce back to the one and only code that I got, the p2646 . What could be the culprit there?

[@got2bgotti10]

Great Channel keep the videos coming....would you know which Spark Plugs to use on a D15B Vtec not a d15b7 🤷‍♂️?

[@sleeks9939]

NGK

[@puertoricanboy100]

Every time I watch your videos its because Lazy Man Garage, I hope he's well.

[@masonscott2341]

you can use a PRD ecu as well

[@zealinbarden3942]

Doing lots and lots research before I make my final decision. I just wanted to know is the K24A JDM with the 3 Lobe 200HP good for Cali legality and is it just as difficult/easy to install

[@thompson_fishing_adventure3865]

I recently did a k swap in my em1 . Everything worked fine until I pulled my intake mani . I put everything back together and now my rpms don’t work . Any idea ?

[@stephenimsong3462]

Looking to k swap my s2k but realizing this video is catered for every other Honda 😅

[@ewergarcia6401]

Thats awesome man so less headaches it’s a k20a2 with ep3 5 speed transmission and 02-04 rsx wires.??

[@jdmfans6078]

very informative video but can you tell how much would be the swap the cheap way?

[@jonathansalgado9194]

About to pick up a wrecked 06 type s for 3500. Plan to part it out after as well(keeping the swap). . I know it’s got the k20z1. Is that a drawback?

[@probong2053]

i dont know much about engine swaps and this may be a stupid question. here it goes if i wanted to put a k24a2 into a ef 1988 civic thats carbureted not fuel injection does that complicate the wiring harness? since im removing the engine i would assume not but when it comes to wiring i have no idea if the ef civic being carbed will affect anything. please feel free to explain yourself on every lil detail. ( i have no idea what im talking about or doing i just know i have a strong urge to put a k24a2 into my lil civic :)

[@MrPerrells]

I’m here to find out 🚀

[@zenithFTW]

Very nice video! I may be a little late to the party, but i hope i can ask you a few questions. I drove a CRX when i was younger, then bought a civic 88-91 which i planned on having some fun with. Alas i had an accident at work, broke my back and ended up in a wheelchair. I definitely want to have some more fun in a Honda before i cruise down the highway to heaven. Anyways; due to my situation, I'm limited to an automatic gearbox. Since (understandable) no-one wants an automatic K-swap, i can find very little information on this online. Do you happen to know if for example a K-24 automatic into a Civic EG would be possible at all? if not, a k20? Or would automatic just not work at all? If you happen to have some knowledge, information, or links on the subject, would be highly appreciated!

[@BruceLee-xp5fc]

Dont forget your need intermediate shafts from an rsx type s to work with most axels ... learned that one

[@Redhawk0117]

Thought theTSX intermediate shafts work as well? For the K24 swaps at least

[@BruceLee-xp5fc]

Redhawk0117 I asked a couple swap axels vendors and they said only rsx type s intermediate shaft will work ... which sucks for me cuz I bought a manual tsx one

[@WeezyNinja420]

I’m doing a k24a swap in my 95 Honda Accord and I know he already mentioned the transmissions but what would be the best transmission to use 🤔

[@tek9834]

recently bought a used EM2 119k miles as my first car i plan on enjoying it as it is and doing some small upgrades (coilovers, wheels, seats, etc) but once the mileage gets to high forsure plan on k swapping and will be going to the junkyard with my buddies for some parts of the build.

[@swollysxpw2025]

perfect! what about throttle bodies and or cables?

[@trevorlocati4341]

How to run PS and AC in EG Kswap? I have been searching top and bottom on forums, FB, personal contacts, KZbin etc. to figure this out. I am ordering my entire parts list this week to complete my car. This is the final detail I need to work out. I want to run the DC5 AC tuck kit running with KTuned EP3 pulley. Would the hybrid racing PS conversion kit work with DC5 tuck & KTuned EP3 Pulley?

[@jdm.symbiotes]

Ive been piecing my kswap over the last year but im also doing a rod/piston turbo k24a, while refreshing extra type S trans with synchrotech carbon master rsx 6 speed rebuild kit and lsd im guessing ill be 12-15k in parts buying 99% of parts new.

[@VintageTechRepairs]

Would like to swap a k20a2 in my ep2 at some point

[@cityconference5130]

I wish they made an high performance automatic trans for it

[@Robertwells596]

A buddy and I swapped his eg for about 100 bucks. lol the best thing to do also IF you have the space is buy an rsx and just part it out and keep what you need.

[@kidistight]

DAMN IT, that intro now makes me want to listen to a Mega Man soundtrack.

[@Max_ellis74]

I’m thinking about taking a integra shell and a 2015 Honda Civic si or a rsx type s and swap it in there. I want a k series engine that revs the highest. Can I use that ecu, and shifter clearance be a issue?

[@sacrabear]

Im running a crv passenger 36mm Axel on my Kswap. No problems there

[@quinnhudgens7729]

THANK YOUUUUUUU

[@chrisvigil4492]

Hey man you doin chip burning I really need a chip burner for my b20 v thanks for the help man

[@johnendlich6744]

Good video...

[@juanamador3384]

I have a K20A DC5 Type R swap going into me EG Hatch will I need to buy a whole new wiring Harness ? Or can I use the one it came with ???

[@stinky15552]

@13 HSG 13 Took me yeah half to get parts for my k-swap. 96 teg k20a2 5 speed. just got some stuff to tidy up but it runs and stuff I need a Type R Front end and I want get some ARC goods

[@divindeep]

When he said they run hot, how hot ar we talkin. I’m tryna swap my 97 civic

[@stinky15552]

@@divindeep you want it to be like 190 normal temps. I used a Koyo K swap radiator some ktuned hoses and I have swivel thermostat housing. I wouldn't be too concerned if it hit 205, but I would start worrying if it was getting in the 2-teens or 220. My biggest issue was bleeding the system trying to get air out took a little bit.

[@flukeDC4]

Does anyone know of a k swap fuel rail i can run standard high pressure FI rated fuel line on? All of them seem to be A/N...

[@unpluggwithpreston]

Will the PRCECU work with 02/04 rsx type S harness plug in play?

[@mikenugget95]

K series legends

[@diegogonzalez7279]

Jezz is really worth it ? I have a DC2 a EG6 and a Accord that swap head has a lot of fun in the Kworld but I keep mines B series having fun with big boy B20 Seems that I’d have about 10 k it would be a fun swap for sure

[@righty-tightybuilt548]

Hey I know your a super busy guy and I am a nobody but hope I get my message to you.. I am in process of wanting to do my first swap on my 95 honda accord ex. It was auto but I did a manual swap myself. I am clueless to the harness part I know I have a obd1 car so if I go with a obd1 swap will it be plug and play? If I go obd2 f20b or h23a which I really want to do.. what will I have to do to my wire harness to plug into the motor? And what else would I have to do? I heard i need to convert the distributor to obd1?? How would I do that just swap it out to a obd1 dizzy?? Or can I wire it up from my stock harness to plug into the dizzy? What else is there? I am so close to getting a h23a1 block with h22 vtec head.. I really want to learn how to do this myself.. I learned the manual swap myself and it works great. But there was no wiring.. so it was easy..

[@Gabesterr]

I know the k20a3 is an economy one but it’s still pretty good? Or should I just look for a k20a and k20a2

[@blakejones2411]

I live right off Rutherford rd, seeing if you have a spare b18b crank for sale. Building a turbo LS VTEC

[@cheezeballer9]

What would you recommend for a boosted awd build

[@psementalist]

Awesome this is going to be good

[@pepinsklappedcivic8833]

What if I picked up a free k24A4 and I’m planning on swapping the head doing a k20 head what trans and ecu would I use there also would you recommend me to build it ?

[@AutoBodyEverything]

Question…. On my k-24A2 swap the engine sits low as you may know, so without even lowering the car, the cv axles are already at an angle and I feel that they might be causing some kind of vibrations or just funny business with driving characteristics. Almost every suspension component is new and 90% of the bushings are newly replaced so there is little discrepancy when filtering out what is making what vibration. The steering wheel feedback is very minimal and almost no feedback at all which odds are good thing. Is there anything that swappers do to help get the cv axles as close to 180° as possible? That’s for response in advance.

[@HuuTonyTran]

I have a Automatic Honda Civic EK4 1998. Can I put a K24 Silver Top Engine from a Honda Accord Euro while using my old existing Automatic Gearbox from the Honda Civic to connect to it ? Or do I have to use the Automatic Gearbox from the Honda Accord Euro and put that inside the Honda Civic instead and will it fit ?

[@frankycn]

What if I love kseries shells, what would you recommend for my 04 rsx gallo 12 or gallo 24??

[@bignengsadventures3086]

So I have a complete Rsx typeS with 6speed transmission and ecu for my 98 integra. What else would I need to get?

[@julz9272]

What about a 03-07 accord k24 manual transmission?

[@renatoperez8792]

Any information on TB, intake manifolds and the crv head mount?

[@pigeonsil240sx]

neighbor k24 swapped eg but bogs out when you rev up.any common issues you seen?its a tsx k24/kpro harness and i think hondata kpro ecu i think he said from 02-04 rsx base model. after scanning it had o2 codes/coolant temp and i think it said "communication network" as another code

[@kaderaqq1350]

need to find a rsx type s now

[@mykolcarlos725]

What up man?!? Haven’t seen anything new From this KZbinR

[@hakanerdem780]

Did Honda put the rsx type s transmission in other cars? In germany its very hard to find rsxes or rsx transmissions

[@xSiC84]

My next car will no longer be a new car. I am tired of all the tech and want the reliability that a k swap will offer. Basically building a civic from the ground up with mostly oem pieces. My biggest concern is not all the parts and aftermarket pieces I will need as those are everywhere. My concern is buying a engine and trans from some where I can trust. :( I am not in any kind of car group and do not know of any local shops around other than 1 that do this type of work. But kswap is in my future !

[@99mustanggt09]

Not even going to mention the tsx 6 speed trans lol don't blame u tho but that's what I have so that's what I got to use haha

[@jchuck8601]

Should be better just to buy a rsx or a tsx 07 😘😘 I had one till I was in a reck... #Good times

[@ezrayoung1485]

I'm thinking doing the swap on my 1998 3000gt sl

[@ThisReckless]

What about K20A and K20A3 can those be used with the PRC instead of the K20A2?

[@chevonne209]

Hi I have a Honda stream 2005 with a k20a1 engine when I turn the AC on and start going uphill the temperature gauge goes up what could be happening

[@abranorozco227]

So in my case I already have a fa5 but also picking up a Teggy I would love to slap on the k20z3 motor and kz3 trans would I need anything different or Can it all just be direct fit