K24 Billet Coolant Adapter + Billet Swivel Thermostat Housing ( MAXPEEDINGRODS )

[@mugensohc2.271]

Idk understand why u still at 100k subs all these gems u be giving people for free and they can’t give u likes or new subs !! Your channel should be 500-800k subs bro !! Show this man some love and likes N subs where u attt !!!

[@victorwilks88]

People are selfish

[@mugensohc2.271]

@@victorwilks88 facts !!! Dude help me soo much watching his videos in garage

[@victorwilks88]

@@mugensohc2.271 the EF encyclopedia lol

[@byronsshop7493]

Here

[@YoungStatic]

i appreciate the support.

[@jimxiong04]

I believe kpro has a built in fan switch already. It uses the other temp sensor on side of head. Atleast on my kswap ek.

[@upfactoryracing4148]

Smooth! Sucks they don't have that manifold anymore because it is descent quality. Glad they thought of that piece!

[@probong2053]

Glad u found the hardware. Ive been in the same situation and ended up creating alot more work for myself.

[@tonyvang9012]

You should do a k20 oil pump on the k24.

[@Wfernandez93]

If im not mistaken the thermo housing sits inside the water pump housing and eliminates the the entire plastic housing

[@hcracer1981]

If it don't fit, make alterations. Awesome ingenuity again. Subscribed to see this one through including being at the track again. Can't wait to see the teardown of the k20!

[@drsvenoo]

Why not putting the k20 head on the k24 block win win ?

[@byronsshop7493]

I thought this was a popular thing for more power

[@YoungStatic]

k24 will make power. im boosting it soon so i rather not part ways with my complete engines to be left with unused pieces.

[@craigsbuc]

Man!!!! This video came in CLUTCH! I purchased a RSP intake manifold cut for a k20. I was literally about to buy a uncut one and came across this video. Appreciate the video and content. Definitely going to subscribe and use that code today.

[@kurtbrownjm]

Dana if my memory serve me correctly, the thermostat switch for K Series are located in the radiator itself, my 2004 Honda accord coupe k24a4 thats where it was located.

[@victorwilks88]

Progress is better than no progress 💯

[@franciscocollins6715]

In Idaho for k24s or K20 with 30,000 on it to go for like $400 to 500 and most of them have a warranty

[@franciscocollins6715]

K20 k24 30,000 MI they go for about 400 to 500 bucks with a warranty

[@petermport]

Next time just thread the coolent holes in the head, Then block the left hole off with a bolt (or use it as a turbo water feed) and the right hole run a AN line down to the thermostat

[@kaybevang536]

K series and B series are my favorite but D series and H series are very underrated every time I got junkyard hunting in Sacramento I used to see lots of H22s and H23s just sitting their

[@kaisslowtaco2320]

They don’t sell that water passage next to the intake manifold

[@caliboyz8314]

U are a legend bro u work with what u got ✌️🙌🙌🙏 .

[@hspeedpro577]

A 12 point socket works great with the tap set...

[@LuisMartinez-kg5hb]

Hell yea glad you are doing a head gasket and timing stuff. So I can see how it's done on a k series.

[@Saltwatersoul213]

I have a k24A2 the metal heater hose that connects to the coolant outlet was leaking so I changed out the seal for it and it still does the same thing. So you think the coolant outlet housing is bad or am I missing something

[@uncertifiedmechanics789]

Keep up the great work. I have learned allot more about Hondas since I've started watching your channel I hope nothing but the best for you and your family

[@Luisv951]

Dam I’ve been following this channel since static had 24k subscribers now it’s at 129k let’s keep going boi! 👍💪

[@caliboyz8314]

Good afternoon from iowa

[@TrevorHenderson-bf1kd]

It looks like the far right circle hole on the block is blocked off? That’s okay to block? I just bought a used IM for my k24a and it’s my first swap but it only has a hole cut out for the smaller hole on the block and the outer hole will be covered by the manifold. That’s fine to block and how it’s supposed to go? Trying to look it up but I’m not finding anything for it

[@goodvibezgaragebsg6789]

Thank you we need more k swap eg info also king

[@tommoon2700]

Hell yea man, stoked Everytime you upload 🤙👍

[@george.k24]

Dam i aint no lie Maxpeeding rods be making some good quality parts wish thay would send me some free gifts like that

[@sentree9857]

Weird, my RBC manifold bolts right up to my jdm k24a no problem

[@pakkawat_r]

After installing , What's problem?

[@brayaguilar3499]

How would you pick a motor at the junk yard if the car is not wrecked, 3 TSX’s at my local yard

[@YoungStatic]

you can try to bypass ignition and power up it up with a battery to seen mileage. otherwise run the vin for last recorded mileage to what ever service it had. rotate crank make sure it spins. pop oil pan to see if any metal shaving are present. pop intake manifold and exhaust manifold to see if there are any bent valves. check oil condition.

[@jeremynance2]

Hey boss man just reaching out for some help possibly with getting a intake manifold for my k24a1 ?

[@CraaaigV302]

Did the last motor have a type s oil pump or stock oil pump? If it has a stock oil pump no wonder it rod knocked and if u don't type s pump this "new" motor the same thing will happen u should already know to never Rev out or even run a k24 wit a stock oil pump period

[@YoungStatic]

Last engine is a k20a2 type s bud.

[@danstewart8218]

Man you really told Him!!...Shame you don't watch the videos so you knew he had a different engine...Take all that neg somewhere else...

[@CraaaigV302]

Ur a crown how is that negative trying to help help someone save a motor by recommending doing to type s pump on the 24 foh

[@9blockperformance948]

Did you watch the verse battle?

[@goodvibezgaragebsg6789]

That oven cleaner 🧐🤓 good ish

[@frosttwoheat7587]

Hey man any tips for newbie like myself? Plugged up everything on my k24, when it try to hook up the valve on the side of the rbc that goes in another valve right below the ps pump. My car will shut off and not idle anymore. Any idea what that might be or why that causes that?

[@millcitychris4303]

My 06 crv was running low on transmission fluid. So i bought some from the gas station. Not honda protect! So is that bad for my transmission?????

[@Parmeshxwn]

Did you just pressure wash water into your exhaust ports bruh😭😭😭 how tf did you get it out or dry it so it doesn’t hydro lock?

[@harryx6968]

I was considering buying that intake and have been looking for it in their website... damn.

[@YoungStatic]

It’s still cheap off of eBay though.

[@daveeezy619]

Looking good bro!

[@humbertoquiroz9894]

Love your channel bro

[@alvincamarillo4951]

Honda all day bro keep up the good work…..

[@JimBrodie]

That lump was a serious bargain. Hard pressed to find one here for under £700. Would you ever consider doing a bike itb swap for an n/a project in the future? It's the only thing i don't think i've ever seen you tackle.

[@YoungStatic]

itb arent my cup of tea.

[@JimBrodie]

@@YoungStatic Understandable, just thought to ask. They are hit or miss from what i've seen and a lot of work to get working right.

[@JuanCalivlogs]

Do you have any k24 engine and transmission for sell

[@JuanCalivlogs]

I will pay first

[@YoungStatic]

no.

[@JuanCalivlogs]

@@YoungStatic ok thank you I was just going to start building my car bit k24 are expensive

[@savuthyean8153]

S1 sweater 🔥🔥🔥

[@scottdoubleyou563]

Lovin these K swaps. But here I am, in Miami, stuck on stupid still wanting to build a B18C for a DA.

[@YoungStatic]

Ain’t nothing wrong with a B18c!

[@kaybevang536]

B series is a good starter build many people prefer B over K especially my simple ass 😆

[@TurboEJ-om1ph]

Hey looking for and header for my k ef any recommendations, I’m building a budget style car

[@YoungStatic]

Ktuned budget header 4-2-1

[@TurboEJ-om1ph]

Would you happen to have a link for one

[@Lej206]

The DBZ King Kai of EF Honda’s

[@ek4dr98]

Look n hard on steelies .

[@kennyman338]

K20 oil pump instead of the k24 one.

[@rickstyla274]

What a score brother..shout out to you and the famz take care bro..🤙🤙

[@macysmith9141]

👍👍thank you Dana!

[@anejohiggs5602]

Love the channel

[@jorgemata762]

Nice job 😎

[@franciscocollins6715]

The piece you cut off if you kept it could you make your own like that haha

[@cedriccope178]

Get it static

[@franciscocollins6715]

Just make your own little flange

[@jameser8851]

Bet you were rooting for bone on vs huh dana? I feel 3 6 mafia took it tho

[@Mr.Saephan503]

Must be nice

[@ningning57]

Wonder if that engine would fit a CRV hmmm

[@YoungStatic]

practically the same engine configuration.

[@ningning57]

@@YoungStatic now to find me a CRV with a decent body and go to town on it. Thanks

[@BIGMAN8435]

​@@YoungStatic When putting a Jdm k24 in a 05 crv l.what do I have to change over

[@josephdejesus8125]

Nice!👍

[@orbitalz7545]

No way u can pressure wash the valves like that😂😂

[@jamie-pt8gl]

💯

[@chef_dc5rx]

That -16 fitting for the thermostat is junk. Threads run too far up where it seals. Had to buy ktuned -16 for it.

[@mannyactual]

I have had same issues with those housing. I ended up sticking with the stock ones it was too much of a headache and nothing I did worked. Leaks everywhere.

[@banky9885]

#Dania u said it 👍🇯🇲

[@AZMarine78]

🤙😎

[@cingham8947]

You buy it Alibaba lol