K40 Laser Tips & Tricks

This is my Top Ten of tricks i have learned over the years working with the K40 Laser. Some of them i use every time i work with the machine.
You are very welcome to leave your tricks down in the comments below.
If you like what you see, please subscribe and ring the notification bell to get notified everytime i upload some new content!
You can also support my channel and become a
/ mancaveeffects
Link to my WebCave!
bit.ly/38qOJWi
Join the Mancave Maker Vault at the new Discord Server:
/ discord
Social Media Links:
Facebook: / mancave.effects
Instagram: / mancaveffects
ManCave Effects Webpage with free downloads : bit.ly/2VAvdgX
#MancaveEffects​ #K40Laser #Tricks
Music by:
Royalty Free Music from Epidemic Sound: goo.gl/jlJWJO

[@georgechambers3197]

I use Coreldrae X8 and the plugin works great. Also in the manager you had on the screen on the right you can click on the eyeball t0o turn off the object instead of deleting it. Thanks for the video!

[@MancaveEffects]

Oh really, thats good to know! Thanks!

[@kortt]

I like the home cloud idea. I've been using Mega cloud service for laser/cnc since my machines are in the basement and I design on the 2nd floor of my house :)

[@DueyMiller-rk9dr]

For cold environments for your k-40 add an aquarium heater and this temperature controlled switch. Inkbird-Itc-308-Temperature-Controller-Thermostat. Put both the aquarium pump and the aquarium heater on the hot outlet of the ink bird and set the temperature to 15c with it coming on with a 1° drop.

[@K40Keller]

Interessant...

[@nikketrikke]

hello what the setting to cut 1 millimeter PC polycarbonate? i need to pass many times at high speed and low power or what? because the Pc tends to curl up

[@Muckylixx]

hey maybe a other solution for problems with the usb communication is to operate the k40 with a Raspberry pi. I have always probs with engraving pics, coz of the poor connection via UBS it came always to line shifts. Since i mounted a raspberry as control computer this problem is over. Simply i mounted the Pi inside the k40, installed linux, k40 whisperer, an usb stick... i controll the Pi via remote desktop and wifi... just the computing power of 3b is slow...better use a pi4.

[@MancaveEffects]

Interesting, i only had this issue once, could it be your mainboard? 🤔 but how do you connect the Pi with the k40 mainboard?

[@Muckylixx]

@@MancaveEffects normal, via usb cable...same way like you do it with your pc... the corel plugin and k40 whisperer just sending G-code to the k40... in my case does this the Raspi... Windows background operations disturbing the uninterrupted sending of the G-code. A G-code which his unfortunately different to the industry standard...

[@glennmartonic6376]

wow....use whisperer.....make your life easier and more accurate....been using whisper since came out....was the main reason i then wanted a k40.....laser draw...corel draw.....forget it.

[@K40Keller]

Du bist doch auch sehr in der K40 Laser Sache. Könnte ich Dich zu einem gemeinsamen Projekt, einen Talk, überreden?

[@MancaveEffects]

Das könnten wir mal machen!

[@K40Keller]

@@MancaveEffects 🍻👍🏻