Kaabo Mantis Pro Tyre Change

[@PauloFernandes-myTeam]

TY!! if you remove the right arm (only two screws), it is much easier

[@basincut100]

Thanks a lot for this very clear and detailed tutorial. I have a Mantis Pro on order so this will be very handy in the future I’m sure. Would love to see a review of those new hybrid tyres on and off the road if you get the chance.

[@schlooonginator1227]

Rub babt powder on tube before reinstalling to help prevent pinch flats. It allows to tube to slide about rather then stick inside.

[@esrider7765]

I find it helps to have a little pressure in the inner tube to stop it getting trapped by the rim.

[@leeschmidt5822]

Thanks ES - will try this next time. Cheers

[@timpriestley8997]

Brilliant and informative video man....thanks - how do you find the hybrid tyres? Ill change from roads to these in a few weeks, wondering what you think? I didn't want full off road tyre so got these also

[@leeschmidt5822]

Hi Tim, thanks for the feedback. We would definitely recommend the hybrid tyres. Basically we didn't notice much (if any) drop in performance while on the road, but did notice a significant increase in performance when taking them off-road....so it seems like a no-brainer to us! Cheers

[@Kamikazekman]

I'd also put a little blue loctite on those wheel motor hub screws... just in case.

[@leeschmidt5822]

Yep, this is a good tip - agree with this. Cheers

[@brianmcmanus4286]

Thank you.

[@MarjjorieDawes]

Can you put these 10x3 ones on the Kaabo Mantis Solo? Or only the pro? Are the tyres different or just number of motors

[@microsoft1665]

bro my motor doesnt move after removing 6 screws. help me plz. 4:13

[@Maykay1312]

U removed the wrong screws or didnt pull it hard enough

[@microsoft1665]

@@Maykay1312 i solved it by hammering flat screwdriving between the rims. it was really stuck.

[@kaleb5897]

thanks bro

[@BurstSenpaii]

Question what if you have a tubeless tyre?

[@phil3306]

Then you won't need a tube

[@itimebomb89]

The Allen screws on my were insane tight and had thread locker on them. I stripped two of them and had to weld my Allen wrench on to them to get them out. Terrible idea from the factory.

[@paatz04]

mine too... I ended up buying a 450mm breaker bar. was very easy with that.

[@whynot0969]

What size Tyers are they, cause I got told by the scooter place that I can’t put off-road Tyers on? Even though in the Controll settings, it has 2 different Tyers sizes🤷‍♂️🤯

[@kudosgear773]

They are 10x3 - kudosgear.co.uk/collections/kaabo-parts/products/10-x-3-hybrid-offroad-tyre-for-kaabo-mantis-pro-mantis-10

[@whynot0969]

@@kudosgear773 thank you 🤙👊

[@firstchoicecp]

I've got the kaabo mantis 10 duo, I have the stock 2.5 road tyres, if I upgrade to the 3" tyres do I need new extended fenders or anything or is it a straight swap?

[@leeschmidt5822]

It's a straight swap on the Mantis 10. Cheers John

[@natebice7375]

👍

[@PHHussler]

Nice

[@punyaphonteangtongkum5957]

👍👍👍🙏🙏🙏

[@jesusisoursavior2682]

i hear there is anlot of problem on mantis after 500mile

[@SemultipliqueX3loquemedeseas]

what is the air pressure of the tire (8.5 inch)?

[@jesusisoursavior2682]

yes its true

[@108mtsan]

I rode my mantis pro for 1,600 miles already. No issues and no flat tires yet!