My jig arrived to Dallas, TX ten days after placing an order. The quality of the jig is superb. Craftsmanship is outstanding. Put it to a test sharpening my chef knife and the results knocked my socks off. There is no way I could have achieved the same results sharpening by hand . Great tool and thank you Mr. Kadlec.
@krosiamakrosiama84834 жыл бұрын
U
@ВалерийБудагов-е7ь3 жыл бұрын
Ф
@hvwj863 жыл бұрын
I’m skeptic. How much was it?
@michaelmnmnguyen9 күн бұрын
Thank you Michal, This is the best jig I have seen. I love how it can take a standard size stone and not those tiny skinny ones. Thank you.
@KrvPatejl3 жыл бұрын
zatím nejlepší tip na vlastní výrobu, perfektní provedení, motivoval jste mě
@Metsger6 жыл бұрын
Got my sharpening jig roughly 2 weeks after purchasing and now use it since a few weeks and I'm happy that I bought it. Thanks Michal for this great tool and the fast delivery
@make_it6 жыл бұрын
You are welcome my friend, thank you!
@JohannesSchmitz6 жыл бұрын
Got it as a Christmas gift for my mum. Works super well, especially with larger knifes one achieves incredibly precise results. I recommend to start with a stretched bar and work with the stone towards the knife as you move along the edge. So basically push the stone in the direction of the knife. It is also shown in the video. This prevents the stone from being damaged by the plade as there's more control when the tip of the blade is reached. Also it is necessary to check and readjust the angle after the first stroke. Begin with a slightly larger angle then after the first stroke have a very close look at the blade and lower the angle. Repeat until it is perfect.
@sheilaharrison65906 жыл бұрын
Johannes Schmitz m
@agcrawford6 жыл бұрын
Sheila Harrison ¡
@OneMoreGrave6 жыл бұрын
You have created quite a nice sharpening jig. I'm impressed. Thank you for showing us how you created it.
@rblaclewell5 жыл бұрын
I am amazed you still have all your fingers!
@tinkmarshino7 жыл бұрын
I made something similar for my use about 35 years ago.. but you have made something that made me go... oh heck! why didn't I think of that way!.. well done my friend.. well done indeed
@make_it7 жыл бұрын
+tinkmarshino thank you very much.
@BO-kh1iz Жыл бұрын
Nice craftsmanship and beautiful design. I was looking for something like this because I still want to use my old stones. Do you think the stone holder would lose stability if one would build a frame for the stone which would hold the stone on the sides? So that you could just flip the stoneholder around instead of removing the stone and reattaching it for using the other side?
@muscletone087 жыл бұрын
Got the jig delivered to Australia with no problems. Fantastic product and waaaay better than some of the more expensive sharpening jigs i have bought. I especially like the fact that you can use full size sharpening stones (just make sure you use similar thickness stones tho). Gives you fantastic razor sharp knives.
@vladonweb16 жыл бұрын
Muscle Tone Just asking, how much did you pay for jug with shipping to Australia? Thanks.
@0zhiph0p6 жыл бұрын
Yer same. Price plus shipping to aus
@kapulu62596 жыл бұрын
Just got mine today. Wife’s making me use it for her scissors first before I can use it on my stuff. Looks beautiful, very smooth action love it.
@kapulu62596 жыл бұрын
Totally worth the wait. I think Christmas and the fact that I’m on the other side of the earth was the factors in the wait.
@make_it6 жыл бұрын
Hi thank you for your information, there was also many customers before the Christmas, so many shipments was little delayed.
@suff657 жыл бұрын
jig delivered today and straight tryed ...never had such a sharpest knife as now.5 Stars .well done dear Michal.
@agcrawford6 жыл бұрын
Mario Menardi bbb
@marekwozniak7290 Жыл бұрын
Najlepszy ze wszystkich pomysłów.
@jameshoffman1842 Жыл бұрын
The thing I really like about this jig is that it uses stones instead of sandpaper …👌
@opasworkshop83737 жыл бұрын
Beautiful job Michael you make such wonderful products.
@make_it7 жыл бұрын
+Opa's Workshop thank you my friend, its nice to hear from you.
@make_it7 жыл бұрын
The price is EUR135 for the jig, it is delivered with the 1000/3000 stone. The rocommend combination: Knife sharpener - 135 2000/5000 stone - 50 Leather block with paste - 23 -------------------------------------------- Total EUR EUR 208 plus shipping cost (Europe EUR - 20, USA, CAN, ASIA, AUSTARALIA, Malaysia ... EUR 65)
@The_Joker_6 жыл бұрын
Michal Kadlec Where can I buy one?
@tonyserafim92376 жыл бұрын
I’d like one. How do I buy one from you? I’m in Toronto.
@MsBode1236 жыл бұрын
I would like to buy one of your sharpeners with stones how can I email you
@MsBode1236 жыл бұрын
Michal Kadlec I would like to purchase one of your sharpeners with the stones how can I contact you directly
@make_it6 жыл бұрын
MsBode123 you can writee e-mail kadlk@seznam.cz
@johnjude26852 жыл бұрын
Do you sale the build plans? Nice job ,earlier I got bugged from pointless noise but like your finish Thanks and thumbs up
@m435673 жыл бұрын
Have used your jig for several years. It's really good. I fall down on the sharpening technique - like Which stone will give me a burr? How much to use every stone? How many stones in a sharpening set? What's the angle for sharpening scissors?
@johnjude26852 жыл бұрын
Stone holder if it fails, Stone might be broken.. " But Big Thumbs Up" love your project. Great build Sir
@CarlosMoreno-mr5me10 ай бұрын
¡¡BRAVO!! FÁCIL Y SIMPLE, MUY BIEN AMIGO.
@MarkWoodChannel6 жыл бұрын
It's a large version of the Lansky sharpener, very nice work.
@erenates6183Ай бұрын
Very nice product my friend, thank you. How can I buy this product?
@wertfreund24806 жыл бұрын
Ist's a *great* piece of workmanship Michal !👌 If You're willing to listen to my advice: If You slit the holes of the "jizzle-like"clamp- that fixates the blade/knife to the wodden block ist's easier to fixate broader blades. It would also be nice if You grind a square 40x20x10mm deep into the wodden block to hold the blade with an N52 neodym magnet the same size. The advance of the more narrow whetstones, which originally came with Apex are just about 20mm wide, so You're able to sharpen koncave internal rounded blades like karambits or hand-scissels. Also is a smaller wooden stone-holder-block lighter and easier to move with less weight esp. on curved knive tips =>less pressure to the edge and tip of the blade. The quality of Your product is *way better* than the Chinese or even Lansky ones 👌👍🙋 I'd *love* if You're improving Your product to *all sizes* => width => of whetstones 20 - 100mm=> needs to slim the wooden stone-holder-block to 25mm and a carved in 60° phase into the middle of the steel stone-brackets .😉
@billk56312 жыл бұрын
What kind of oil do you use for the leather strop? Great job. Thanks
@jachconi3 ай бұрын
Do you still sell these? Wondering what the cost is? Shipped to New York
@michaelbyron9688 Жыл бұрын
Are you still selling the jig? If so, what is the cost? Price to US?
@martinblazek71994 жыл бұрын
Co tak ještě vylepšit držák kamenů pružinou? A nebo i držák nože? Dát pružinu tesně před část co drží nůž, aby bylo snadnější upevnění nože? Pokud bys toto vylepšení použil, klidně bych se přihlásil o využití prototypu č.3.😉👍🏻
@CarlosMoreno-mr5me10 ай бұрын
¡¡BRAVO!! FÁCIL Y SIMPLE.
@garlandremingtoniii13385 жыл бұрын
Michael I want to buy one! Tell me how much in American dollars $ and how and when can I??
@kerstinserna98514 жыл бұрын
Very Nice. I world live to but One of your super tool. How much It cost ? thanks
@fredberry1342 Жыл бұрын
Do you sell these sharpeners or maybe the plans?
@ToddAndelin7 жыл бұрын
It doesn't get any better than this.
@bibliothequenibras90074 жыл бұрын
what is the angle of sharpening
@abdoelka16714 жыл бұрын
Nice job, how much this sharpner??
@yetoburnukoglu9084 Жыл бұрын
How can we order your Jig? Do you ship to Canada? Can you provide a quote?
@gunlokman6 жыл бұрын
Great - I especially loved the cup of coffee bit!
@JesusmoranBarber3 жыл бұрын
Se pueden afilar tijeras de peluqueria de esta manera?
@mogulsmoke2428 Жыл бұрын
Are you still selling the jig? If so, what is the cost?
@annap35205 жыл бұрын
witam ,jest możliwość zanówienia u Pana takiej ostrzałki jaki koszt i czas na zamówienie z góry dziękuję i pozdrawiam
@АльбертДобрыйтатарин4 жыл бұрын
Отличная работа,аккуратно всё!,молодец.👍
@williamspence50295 жыл бұрын
Price please for complete set including leather strop, shipping to Scotland very busy chef who takes care of his very expensive knives thank you. Can wait till Jan if it helps.
@make_it5 жыл бұрын
The J&O knife sharpener EUR 140 1000/3000 sharpening stone included, than my recommendation 2000/5000 sharpening stone EUR 50, polishing set EUR 23, shipping EU EUR 20. All together EUR 233. I still can send within 2 days, anyway 3-5 orders/shipments flying out the door every day so it is hard to say haw long my 2018 stock stay available.
@williamspence50295 жыл бұрын
Ive just watched a new blog for your metal mark 2 version , sorry to be a pain how much for that one plus the same sharpening stones. Thank you for your time.
@BBBYpsi5 жыл бұрын
excellent job making this jig.
@youbetterwatchout27454 жыл бұрын
Hi what is the Price for this lovley Produkt
@cheryljason96173 жыл бұрын
Well hella bells I'd rather pay you than some wicked edge big company... look like I'll be getting a early Christmas present lol thank you sir
@juanayala85873 жыл бұрын
Buenas noches amigo podrías ayudarme con el nombre de la aplicación que usó para el móvil y medir ángulos Y gracias de antemano
@JuanAguilar-nv6lu5 жыл бұрын
Dear Michael Thank you very much for yours videos. Please if its possible, show us your workstation and yours machines in a next video. I´m amanzing for the quality of yours devices.
@bratsk_rulit4 жыл бұрын
Tell me the length of the board on which the knife is attached?
@basdekemp6 жыл бұрын
Hi michal, very nice product. Can you advise the height from the from the jig when all is mounted? Thanks
@adelinoalves49325 жыл бұрын
O aparelho está muito bem feito e o Sr deve ter mesmo muita confiança pois arriscou colocar o dedo bem à frente do formão (?). Com a quantidade de ferramentas que possui, mal parecia que fizesse má figura.
@LS34382 жыл бұрын
Are you still making these?? I would like to order one
@sergei85155 жыл бұрын
Хороший станочек. Талантливый человек, талантлив во всем. Лайк! 👍
@steann16 жыл бұрын
So i only need $2,000 worth of equipment to sharpen my $20 knife... doh ! I am kidding... enjoyed every minute of it.
@make_it6 жыл бұрын
More than $2000 - :-D
@steann16 жыл бұрын
Michal Kadlec .. i am jealous.. but love it.
@lepoloo3 жыл бұрын
What is the price of such a jig? BTW good job!
@31acruz Жыл бұрын
the guy sells the jig yet never tells you how much it is or where to get it. incredible.
@Max-uz8ys7 жыл бұрын
Verry nice jig. But what is the price in Euro or Dollars
@qamarulmajidi80353 жыл бұрын
can it sharpen curve surface nife
@Tungmoto6 жыл бұрын
It looks so scary everytime you use the table saw. Please make something to push the wood instead of your precious hands. Anyways, I love the design.
@shaggyda27587 жыл бұрын
Thank-You for sharing,very nice detailed video! you did`nt spend 20mins telling us, how you got started!
@marekmagyar51197 жыл бұрын
aku maximalnu dlzku noza je mozne nabrusit bez toho aby sa noz musel presuvat ? a co ohybne noze na ryby? mozte vyrobit siroku zakladnu aby sa noz neohybal pod tlakom brusenia?
@make_it7 жыл бұрын
Díky dlouhému ramenu se dají brousit nože délky okolo 300 mm bez přestavování, Vodící tyč s držákem kamene je dlouhá 70 cm! Co se týká filetovacích nožů, tak bych Vám mohl spíše udělat pod nůž podložku, jenž by se upínala společně s nožem a zamezila by tak jeho prohýbání. Kdyžtak mi písněte na kadlk@seznam.cz a domluvíme se.
@nicolasm32175 жыл бұрын
Bonjour. J'adore ton système d'affutage, simple, le seul coût ce sont les pierres japonaise sont son extra, mais j'ai pas bien compris la texture rougeâtre que tu as mis sur la pierre ? Merci Bye
@cyranozimmermann31184 жыл бұрын
nicolas M il n'a pas sur ses pierres, mais sur son cuire. Il a accroché un bout de cuire a une pièce de bois et la pâte rouge qu'il met est de la pâte à polire, c'est pour bien finir et avoir un tranchant rasoir
@جوجوحسين-خ6ض4 жыл бұрын
Your work is very beautiful, professional and professional, but can I ask you for a request? I want the name of the application that I use on your mobile phone in the size of the semicircle to determine the required degree. Thank you
@PecanLane7 жыл бұрын
How well does this jig handle smaller knives such as a paring knife? What is the white paste on the leather? I would like to order everything and sent you an email.
@mulisha03516 жыл бұрын
white paste should be a buffing compound
@BellaGamtosStebuklas7 жыл бұрын
Hi Michal, I'm living in France and would like to order your knife sharpener with two waterstones and leather block with paste.Please, can you tell me what is the brand (and model) of waterstones and leather paste sold with the jig ? Thanks !
@geirarnetangen45716 жыл бұрын
Very nice sharpening system. I would love to buy it, but if i can't be used at 10 to 15 degrees it is of no use for many of us with japanese knives. Please tell your customers the work range of your system. So sorry it seems not to fit my needs.
@make_it6 жыл бұрын
Standard 14 - 30 degrees, with extra part 10 - 30 degrees
@geirarnetangen45716 жыл бұрын
Thank you for your prompt answer. So how much for the extra part(s) in addition to the jig only.
@make_it6 жыл бұрын
extra short pipe just available to be delivered with the jig or as a extra part.
@farmerbrown20104 жыл бұрын
It's been a year since the last post. Are these jigs still available? Where can I get contact information?
@make_it4 жыл бұрын
Still available, just write me to kadlk@seznam.cz to
@marianbodnar54686 жыл бұрын
Dobrý den, systém Jig II je i k prodeji? Pokud ano, kolik tento systém vyjde a kde lze objednat. Děkuji za odpověď
@terryn39216 жыл бұрын
what's the best angle to sharpening the knife?
@saulcesaramaro74656 ай бұрын
How much is the jig
@dantemarasca4 жыл бұрын
Hola, saludos desde Argentina, muy bueno el dispositivo que hiciste, deseo hacer uno igual, pero yo usaría lijas de distintos granos, que es mas económico que las piedras, podrás pasarme un croquis con distintas medidas del dispositivo ?? muchas gracias
@garycopland-powell59156 жыл бұрын
How do I go about ordering one of your sharpening jigs? How much is it? And what would the postage to the uk be? Thank you
@make_it6 жыл бұрын
Thank you for your your interest in J&O sharpening jig. the EUR price is 135,00 (1000/3000 stone included), United Kingdom shipping EUR 20 Wish you to have some more sharpening stones? Let me to recommend you 2000/5000 grit stone for EUR 50 and polishing set (leather block and paste) for EUR 23 - optional Have you already your sharpening stones? The price for the jig without the stone is EUR 110. The stones are Taidea and the paste is Tormek brand. Delivery time about 2-3 weeks Paypal as well as the money bank transfer possible. Best regards Michal Kadlec
@TrojanHorse19595 жыл бұрын
Very nice! How much does it cost?
@corey6884 жыл бұрын
What range of angles will your jig adjust to ?
@make_it4 жыл бұрын
12 - 30 degrees
@jonathanwesselman15753 ай бұрын
How do I get the pieces ans parts?
@todosupervivenciaymas74293 жыл бұрын
Could you pass the measurements of this sharpener?
@ДмитрийВасильевич-ч6х5 жыл бұрын
Супер Точилка!!! Браво!
@bratsk_rulit4 жыл бұрын
Tell me the length of the pipe on which the hinge is mounted?
@make_it4 жыл бұрын
The dimensions at my patreon account available.
@panagiwtiskalampokas98085 жыл бұрын
hallo. can l order one? l live in Athens Greece. But l will know the price first. Please answere to me. Thank you
@tomaswiak36256 жыл бұрын
Hi Michal, congratulations to a fantastic Product. May I as what is the smallest angle you can adjust on your jig ? Also, which dimensions (length) of the stone fits to your jig ? Best regards from Sweden.
@obiorah14 жыл бұрын
That’s impressive, well done, excellent,
@72zygmunt3 жыл бұрын
Witam. Jaka jet cena ostrzalki
@habibariffin92676 жыл бұрын
Can i order one from you. How much it will cost. Im from Malaysia
@edwardmcallister56814 жыл бұрын
Would love to buy but I don't have a facebook account (and don't want one) so how to get one, that's the question.
@danielredondo109010 ай бұрын
Hola me gusto mucho tu video saludos cordiales. Daniel
@parsia13636 жыл бұрын
Hi my friend, how can I make one of those magic, coffee making boxes??? But seriously I love this video, great production quality as well as very informative. Please let me know if you ever decided to sell one of those jigs, I would love to have one and there is no way I can make one. Thank u and keep it up
@dokomato81615 жыл бұрын
How I can sharpen small knives? I guess it's not easy.
@make_it5 жыл бұрын
Have a look: m.facebook.com/story.php?story_fbid=388109495234532&id=142065553172262&sfnsn=mo
@dantemarasca4 жыл бұрын
excelente trabajo,te felicito
@lapualapua12486 жыл бұрын
Excellent system well done 10/10👍🏻
@BeetleJuice19806 жыл бұрын
Why are the scissor angle so different?
@joepatterson44154 жыл бұрын
How can I order one from you and what is the cost
@lonewolfdesignsbylarry5 жыл бұрын
Can this jig be used for setting the first bevels on a new knife using files?
@mavamQ5 жыл бұрын
I'm not a knife maker but have watched a lot of videos and have seen others use a 50 grit sand paper on a piece of wood in the jig to make the first bevel. Then go to 80 grit paper and then on to stones. Just cut a piece of wood the size of the stones and glue the sand paper to it.
@valentinzuchuat96497 жыл бұрын
Just got it today! Amazing job Michal!
@make_it7 жыл бұрын
+Valentin Zuchuat thank you Valentin, nice to know that the jig came to you. Wish you all your knives become super sharp.
@gerardoherrera47273 жыл бұрын
Parece que hicieron él vídeo más, para mostrar las herramientas que para mostrar la fabricación del afilador
@bodybuildingmotivation67345 жыл бұрын
I love this vid awesome no one better than
@karlorodriguez41445 жыл бұрын
Hola amigo buen trabajo.q medidas tiene el afilador q fabricaste.saludos man.
@tomedimov20036 жыл бұрын
Hi Michal i have emailed you to ask you how much will cost me your jig with shipping to Australia. I need just the jig i have sharpening stones. Thank you very much
@10000rambos6 жыл бұрын
So...wouldn’t the proper sharpness test for the scissors be slicing vegetables?
@tomtrahan64265 жыл бұрын
Do not have a Facebook accouint but would be interested in the pricing.
@donsegundo50125 жыл бұрын
Hi mate, what is the smallest angle that can sharpen?
@joharstudio15906 жыл бұрын
this thing is so satisfying
@tedkocot89876 жыл бұрын
Dude, cool project, but for the love of God! Push sticks!!!
@handledhandlehandlinghandler6 жыл бұрын
I spent so much time cringing, I got a cramp. Glad he can still count to 10.
@GuillaumeVachon5 жыл бұрын
He reached over the blade so many times!!!!
@RedDFuid892 жыл бұрын
I though I was the only one 😂. I nearly pooped my self watching an accident waiting to happen .