Kaiser Willys Dana 41 44 rear locker install CJ2A CJ3A M38 CJ5

[@tomralls2766]

You only used the large washers, got that now. I am moving slowly on this project. Thank you for putting this video to gather. Getting the axles out was a challenge as I did not have a hub puller or a slide hammer. I over came with some out side help.

[@geoffreyclark2805]

Seth, great step by step installation, and explanation of different type of differentials. Can't wait for front diff. video. Thanks, Geoff.

[@battlejack1863]

Thats alot less work than starting over with a conventional locker and changing out gear sets! I like it!👍

[@greywolfwalking6359]

Awesome class teach.. Thanks 👍!! No questions at all..that's how thorough a job you did!! Easy- peasy!! 👍🧙‍♂️🐺!!

[@redeyecafegarage7484]

Thank you! 😊

[@greywolfwalking6359]

@@redeyecafegarage7484 👍🐺🧙‍♂️🦊👍U R WELCOME !!

[@J.A.M.M.208]

Seth takes his hobby into the stratosphere...congratulations on that skill. Many greetings to your family over there in Pennsylvania... how are Andrea and the children?... greetings from Chile

[@redeyecafegarage7484]

Thank you. We are doing well. Merry Christmas 🎄

[@davewinstead4834]

I am glad that you made the video. All of the videos on KW site is really a gloss over video. This one is detailed

[@redeyecafegarage7484]

Awesome! Thank you for the feedback and I’ll glad you liked it!

[@sweetmeat4248]

Great video. Simple, quick, clean and very informative.

[@redeyecafegarage7484]

Thanks!

[@KenKen-nv8hd]

Great instructions Seth, as always

[@redeyecafegarage7484]

Thanks Ken!

[@LetsBuildaWillysJeep]

Nice video and to the point 👍

[@redeyecafegarage7484]

Thank you!

[@amcjeepmancj7]

Nice work Seth.

[@redeyecafegarage7484]

Thank you James!

[@cpwatching5647]

Well done! Thank you. I have a 58 CJ5 thinking about lockers. Take care.

[@redeyecafegarage7484]

Excellent. Have fun!!

[@amx19733]

I’ll be ordering!!! Awesome review/install!!

[@codyaverhoff6828]

Awesome video! Take Care

[@nomex1996]

Great video Seth!

[@redeyecafegarage7484]

Glad you enjoyed it! Thanks!

[@oscarpuente2029]

outstanding!

[@redeyecafegarage7484]

Thank you kindly!

[@WillysHellToad]

Thanks to you!!

[@JMo268]

I installed one of these lunch box lockers in the front of my jeep. I did not do the rear because i understand they lock under throttle. So if it's in the rear you have to remember to coast on the street when turning.

[@redeyecafegarage7484]

Nope… I just drive like normal. Coasting through all turns is pretty much impossible with normal driving.

[@JMo268]

@@redeyecafegarage7484 thanks I appreciate that info!

[@justintomt]

My gap is way out of spec, do you know where I can get thicker thrust washers?

[@redeyecafegarage7484]

I’m working on some answers for you. I have used ones from other axles around here. I always hang on to them for that that season. Kaiser does sell replacements. I’m trying to find out what thickness they are. You can stack them too if the math adds up.

[@justintomt]

@@redeyecafegarage7484 thanks for trying, I came up with some John Deere shims at work and ground out the center hole a little bigger, worked perfect.

[@redeyecafegarage7484]

Great! I’m glad you found a source. I’ll still post my findings because I’m sure you’re not the only one with that question. Thanks for the update!

[@heyyoubuddy6749]

Hi buddy how are ya? I really like that you teamed up with Kaiserwillys to make how-to videos, and offer a discount code. While watching this videos I noticed you have spacers and vented disc breaks on ole’ sarge? Is the a Brendan’s garage set up? Did you use a 2psi valve on the back circuit as well as the front? I’m thinking I miss a video I don’t remember watching install that? Thanks for sharing God bless you and the fam. Have a merry Christmas!

[@redeyecafegarage7484]

Hi! Thanks! Yes I’m super exited to be working with Kaiser Willys. The disc brake kit is my own custom setup. I documented it on my Instagram page and the Cj2A page forum. I run the stock master cylinder with the residual valve removed. You don’t need anything else. They work great. That’s what I run on both my Jeeps! 👍

[@heyyoubuddy6749]

@@redeyecafegarage7484 cool thanks can’t wait to get going on my Jeep

[@randallstewart8487]

How noisey is it in a normal flat surface turn when it ratchets?Thanks for the great video!

[@redeyecafegarage7484]

They all seem to have a different personality… both my Jeeps are very quiet when turning but I have friends with the same locker and it’s noticeable

[@randallstewart8487]

@@redeyecafegarage7484 I know they have to make some noise when ratcheting,just wondering!Thanks!

[@laggardpahadi]

Great video, and how to activate the locker?

[@redeyecafegarage7484]

Thanks! It’s an automatic locker. Once installed it does all the work. No activation needed. 👍

[@nimeshvala1793]

Locker price pls

[@tomralls2766]

The washers that came out looked dished. Did you hammer them flat, or get new ones? Getting ready to lift my M38 to start the disassembly. I really like your videos, they are lots of help. Thank you Tom

[@redeyecafegarage7484]

The spider gear washers are dished

[@walterrote5528]

Where can I get .040 shims? Clearance between the halves is .185 instead of .170 max. Stock shims are .030

[@bmstowell1]

What is the torque for the axle nut?

[@redeyecafegarage7484]

150 ftlbs is the number you will hear a lot… but you have to get the cotter pin in so once you get close to that torque watch for the hole to line up. Honestly I use my impact gun and I can tell when it’s tight enough and then just pop the pin in. 15 ugga duggas 😜

[@AppalachianBlueLines]

Do you have to have a full float kit to be able to use these lockers?

[@redeyecafegarage7484]

Nope these work with any of the 10 spline axles 👍