KAIWEETS KM-601 CHEAP-O Multimeter Review & Teardown!

[@willgilligan7605]

Did I miss the TRMS measurement? Kaiweets appears to be upping their game. What was the wire at 18:45 that sorta looks like a shunt?

[@bsahomeimprovementcontract2951]

Very knowledgeable on the aspects of the working condition of the multimeter which does a lot for the price and I believe it is well-made Bsa Home improvement. Contractor definitely is a 4+ rating.

[@KeepOnTesting]

I agree 💯

[@leononinckx5430]

At 16:34, what is going on with R52 ? Seems the resistor is damaged? (next to the R005 resistor)

[@KeepOnTesting]

That was another KM-601 PCB used for the Teardown.. it was originally in a multimeter that DHL destroyed during shipping. 😵

[@ericchang7706]

I never would have expected Kaiweets to be so innovative and try to do something so radically different. I hope some sort of visual current indicator becomes standard on all future meters; it wouldn't take much to change the font color, style, make it blink, etc whenever leads are in the current jacks.

[@KeepOnTesting]

So true...lots of innovation on the KM-601..! KAIWEETS did a great job with this multimeter !

[@CliveChamberlain946]

Darren, your video productions just keep getting better every day! Nice finesse fellow 🇨🇦 bro!! Is there any chance Banggood can scare you up a few of those cheap component testers so you can do a shootout comparing bang for the buck?

[@KeepOnTesting]

Many thanks! Yes, I'll definitely be reviewing more component testers 😀👍

[@CliveChamberlain946]

@@KeepOnTesting FYI - Wonderful reference tech video was just put up on the TheHWcave channel. It's called" " #108 Building and testing an eBay Transistor Tester kit " he's promised an update on firmware updates later. C Ya!

[@krisea3807]

Which one you would suggest among HT118A and KM601 ?

[@danielwittmotorycle6541]

Kaiweets KM601 vs Kaiweets HT118A?? Cheers

[@mux000]

i will never build a 50€ multimeter with broken continuity mode. do they fixed this issue on KM-601S ?

[@MANINDERSINGH-bw4ms]

Darren sir while checking dc voltages in smart auto mode when set is in off position,it may show resistance mode then if sudden voltage comes then it harms the multimeter or meter immidiate change to voltage mode after resistance mode.secondly if capacitor open or weak then what kind of votage it shows ac or dc or show error(in micronta multimeter error comes like blinking display with sound) give damage to multimeter.also explain 6000 count with 9000 count difference.thanks

[@KeepOnTesting]

I experienced no glitches in SMART MODE.. the multimeter performed extremely well! 9999 counts is simply a higher resolution display, allowing for more accuracy!

[@MikeGillett58]

Thanks for the review, I did not know anything about this line of equipment until now.

[@KeepOnTesting]

Great stuff ! It's a big field.. lots of choices.. KAIWEETS is one of the best in this price range!

[@dusanstevanovic9125]

wow, just wow, a first smart multimeter i really want to buy, thank you darren for discover this little Kaiweets, also name of meter is cute, like sweets :D

[@shaunmorrissey7313]

That's quite nice, I'm not normally into "smart" meters, they tend to be a bit slow, I can Vouch for the quality of KAIWEETS leads, I have just bought a set and very happy with them. Looking forward to the next KAIWEETS review😀

[@KeepOnTesting]

You and me both.. this definitely takes the SMART meter up a notch 👍

[@derektodd4126]

Am definitely interested in this one. What is maximum resistance on this puppy?

[@KeepOnTesting]

I don't blame you..max resistance is 60MΩ

[@mdzacharias]

I picked up the Astroai version with a 70% off coupon deal plus 4.00 off from Amazon. Total cost: 17.99 with free next day shipping.

[@KeepOnTesting]

Steal of a deal Mark ...! You must have one heck of a horseshoe collection 😀👍

[@mdzacharias]

@@KeepOnTesting I got one of the 6000 count version of the HT118 for 14.49, missed the 4.00 extra coupon. Got a second one for 10.49. Both with free freight. Didn't need them but who can resist?

[@samdeur]

bin looking at Kaiweets and Aneng.. Have to say as a newbie i'm a bit overwhelmed.. Does anyone know if there is a comparison chart or a vid that compares all these affordable multimeters. Still have to look at other vids you made like the ST600Y

[@housinit]

Hey Darren, great review! By chance, do you think you could start shorting the leads on diode mode so we can see if there is a continuous beep when shorted in diode mode? The way some Fluke meters behave. Still looking for a Cheap-O that does that. Thank you Darren! Still loving both my Aneng AN8008 and Kaiweets HT118A, but no continuous beep on diode short. Thank you Darren!

[@KeepOnTesting]

Definitely will do Luis ! Btw, no continuous beep while shorting 😀

[@yambo59]

Hey where did ya find that white stand, is that a stand for a cell phone-???

[@Nazmi_PWM.C]

When measuring voltage, it keeps the last read value in its memory for a short time when the connection is disconnected. This is an undesirable situation.

[@mrlaw711]

After three weeks the KM601 is perfect. I needed a replacement set of "leads," and the Kaiweet's support team is second to one ...they sent me what I needed and more. I received a better response from the support team than you do on a new car, or new appliances at Lowes, or just about anything I've purchased in the past ten years that required contact with customer support.

[@KeepOnTesting]

Awesome update ! Kaiweets support truly is second to none. Glad they took good care of you!

[@TheRadiogeek]

Kaiweets extravaganza week. I’m digging that display, but no stand? Maybe the leads should plug in the top of the meter and move the power button to the side? Nice review! 👏🏻👍

[@KeepOnTesting]

So true...sweet display! Why do they think that SMART meters don't need tilt stands...! 🤪

[@barrykery1175]

As soon as I saw the first video on this multi meter, I ordered one post haste. For what you pay for this multi meter, you get a fabulous tool. There is just so much you can do with it and what a great display. I have no complaint about the lead location. You aimed the plugs down so you could not lay the meter on it's back. I aim the plugs up and have no issue what so ever with them. Yes, my Fluke has the plugs on the front face of the meter and that is nice. The plug location on this meter is no big deal for me. I never saw it as an issue. Good video, thanks for posting it. Barry

[@KeepOnTesting]

Thx Barry...definitely one great multimeter and what a gorgeous 😍 display! 👍

[@hayzersolar]

i just got my km601 today love the look and feel of it.

[@KeepOnTesting]

Great stuff Marc ! Enjoy...absolutely love that multimeter!

[@stevedebeukelaer1424]

Darren that looks a very nice multimeter will be sold as habotest ht 116 as well. You forget to test capacitance mode

[@KeepOnTesting]

I purposefully left out capacitance to keep video length close to 20 min. Cap test passed with flying colors.

[@jasoncarloni3573]

Love this meter I've had one for a month or so ideal for vehicles and quite accurate

[@KeepOnTesting]

Great to hear Jason!

[@mattstroker]

I *really* like it and I really want it but boyyyy.... That continuity mode delay.... Ouch. Even the stand and glare I can forgive them. But that's delay means I need to use another meter for that in a lot of use cases. Did you already find out what the total screen-on time is before the batteries run out? And the fuses, are they the beefy sand ones or normal glass fuses?

[@KeepOnTesting]

Fuses are ceramic 6x30mm good quality. You have about 75 hrs of display time so no worries there. Other than continuity..this is one great multimeter!! 😃👍

[@SevenDeMagnus]

Hi. I my Kaiweets KM-601 just arrived (it's the rebranded Habotest HT116, not sure if they have the same build quality). Is it really like that when it's in Auto/Smart Mode- if I measure a capacitor, it automatically uses the Ohms which is wrong coz' that's for resistors. Also is this acceptable tolerance, they're capacitors that were slightly used (just minutes) but they're not exactly branded: 1) 330uF but it reads 348.4uF 2) 100uF but it reads 93.52uF 3) 470uF but it read 480.9 uF 4) 33uF but it reads 38uF 5) 680uF but reads 1.024mF (milliFarads) *I'm not sure if this capacitor is still working even though it's just slightly used 6) 100uF but reads 93.51uF 7) 1000uF but reads 988uF For the Resistor test (the bands are starting from the left are: yellow, violet, brown and far from the 3 is gold, it's chunky resistor used for discharging): 470ohms (+/- 5%) but reads 472ohms I did initially use three 1.2v Eneloop recharchegables but that didn't seem enough voltage, I switch to fairly used AAA non-rechargeable batteries which had this charge 1.5, 1.5 & another 1.490v (batteries are now at 1.490v X-D after a hour of use) What's the best AAA battery for this? Eveready's non-rechargeable lithium ones or rechargeable lithium from 1.5v non-branded chinese rechargeable lithium (Kaizen brand= it's seems it copied Smartools)? Thank you. Please advise if I should refund this if the readings are too far from the values. God bless, Rev. 21:4

[@KeepOnTesting]

The readings look good 👍 Capacitance is never spot on but it's definitely in spec. Btw the Smart/Auto mode doesn't work in Capacitance hence the resistance display. Battery wise, my favorite is the Rayovac Fusion (Alkaline)..they last forever..won't leak and have lots of power. Keep the multimeter..it's a good one!

[@TRONMAGNUM2099]

Nice 4/5 is high praise from you. I like the manual override. I usually don't like Smart meters, but throw this in manual mode, and you have a nice large display. As I get older and having Diabetes, the large display comes in super handy.

[@KeepOnTesting]

Agreed, that big dual display is a dream come true...even in low lighting conditions the clarity is incredibly good!

[@boonyakornthanpanit7656]

This Kaiweets actually change my attitude towards the smart multimeters!

[@KeepOnTesting]

Me too 😀👍

[@electronicengineer]

Hello Darren! Thanks, as always, for your always spot-on and "fluff-less", professional reviews of the barrage of test gear available today. I personally am not a big fan of "smart meters" however, this Kaiweets meter has me reconsidering, what with a dedicated Auto Power Off bypass switch which is just simply AWESOME! Too many digital VOM manufacturers' meters seem to always shut off on me right while I am in the middle of troubleshooting, and I find myself getting "time out" meter anxiety... Really! If you know what I mean then you have probably been there yourself my friend!. I end up rushing to troubleshoot a circuit because I know that any second the darn meter is going to beep and turn off on me. I really despise that and here KAIWEETS is showing all of the other manufacturers: Hey! that Auto Power Off feature is really flipp'in annoying at times and "lets make it EASY to deactivate it, right... Why not? I am tempted to get one of these little beauties JUST because of this SUPER thoughtful and useful feature. Honestly, the power consumption of these newer VOMs is so low, the APO feature should just be OFF by default, and be a feature that the user can activate, if they are that worried about the $2.50 worth of household batteries, getting depleted a little sooner/faster. Hey, just my $0.02 opinion buddy. I hope that you are doing well Darren and thank you again for this valuable test equipment evaluation service, which you provide for all of us. Love ya man! Fred

[@KeepOnTesting]

Thx Fred...wow I totally agree with you ! METER ANXIETY...I should do a VENT OF THE WEEK on that ! 😮👍Appreciate your enthusiasm...Keep On Testing!

[@bhushan9066]

The glare of the display can be easily tackled by applying a cutout of matte tempered glass which will not only prevent smudges but also protect it from fall damage. Continuity can't be improved though. Amazing video and production quality from you, hats off! 👌 Also, why does the Kai Weet? ..... because it cannot Tweet! 😂

[@KeepOnTesting]

Muhahaha 😉 Thx my friend 👍

[@cyberhawk99]

What is the original display screen made of .. plastic or glass?

[@thienanpham7466]

Thank you for another detailed DMM review !!!

[@KeepOnTesting]

Thx my friend!

[@kennethrodney4678]

Man i am so glad you are doing a Kaiweets week on their multimeters i think they are the best!! I have been longing to get man sweaty little hands on their HT118A multimeter for the longest time, thanks for the review Darren keep it up buddy.🤘👍

[@KeepOnTesting]

Thx Ken..KAIWEETS make some good stuff 👍

[@electronics_hobbyist]

Sometimes u need to wipe your lead tips with rubbing alcohol, I don't know if when they molded the leads if it ends up coating the tips with some clear insulated material, everytime I buys a new pair of test leads I usually wipes it with rubbing alcohol and it cause a fast continuity response

[@KeepOnTesting]

Great advice 👍

[@electronics_hobbyist]

@@KeepOnTesting yup yup, I had thrown away some leads in the past thinking was the leads at fault but u came across this youtuber,,think kiss analog and i saw him cleaning it and I decided to try that and soon realise it does wonders 😁

[@gman917]

Another SOLID 4 stars! I purchased a UNI-T UT123 you said the same thing about and it lasted 3 months, I replaced it with a PlusivoDM101 $9.99 meter that I rate 5 stars because it's still working!.. lol

[@KeepOnTesting]

Yikes what happened...? My 123 is going on 2 years without missing a beat.Solid dmm.

[@gman917]

​@@KeepOnTesting kept eating batteries--almost always showed batteries were 1/2 dead even though they were new..it wouldn't turn on unless new batteries were installed.. finally the dial just stopped going to the correct setting. real fun time...

[@KeepOnTesting]

@@gman917 Yikes, sounds like something was shorted.. sorry to hear it wasn't up to snuff 😮

[@gman917]

@@KeepOnTesting that's what I thought, gee great minds think alike...lol

[@chahestan1]

It will be helpful for us if you are going to provide the multimeter price as part of review. And is the price a part of rating?

[@KeepOnTesting]

I try to mention the cost if possible although it can be relative to your geolocation. Normally it's not one of the rating criteria unless the price is phenomenal but that's rare. Usually all the CHEAP-O MULTIMETERS are in the sub 50$ US price range.😀👍

[@MikeGillett58]

I really like the case, I tend to be hard on my meters with the leads getting sloppy in the connection, this becomes my number one fail point. (As well as breaking the screen), I like the way this looks, far more like a phone, place to put the test leads. Since I don't like to carry too much extra stuff around, it falls out, I have to shove it someplace the thermal couple will probably get lost, so when I go to test that thermal glass heating oven I am building I will have trouble finding it. Cable management, different banana plugins, every device having different leads. I will get organized one of these days when someone designs something extremely universal.

[@KeepOnTesting]

That case is definitely a bonus..rugged and lots of room for "stuff" !

[@juanbravo5504]

No mide resistencias de menos de 1 ohm porque?

[@dirtrider88]

6:52 its a 10000 count meter. its showing 9.98. shouldnt it be showing milivolts?

[@KeepOnTesting]

Multimeter was in DC volts, not in the mV range, so the voltage displayed was correct.

[@yambo59]

Over time curiosity got the best of me since my last comments below and I bought this meter a few weeks ago-- on mine the continuity seems noticeably better than the example in this review, hopefully they made some improvement in that area. However the NCV on mine is about the same but I dont place any faith in 90 percent of multimeter NCV functions anyway. It does feel well engineered and well built, doesnt feel cheap and gotta love that color display, but I also wish the jacks were on the face of the meter and not out the bottom

[@KeepOnTesting]

Oh dang I knew you had the KAIWEETS itch bad! Glad you're happy with it. Great all around dmm and pretty tough all things considered.

[@samdeur]

update: i found a comparison on the KaiWeets webpage went looking for the KM601 scrolled down and there was a comparison chart.. ;-)

[@KeepOnTesting]

Oh yea ! Thx for the update .KAIWEETS did a really great job on their website 👏

[@pikricky]

I use the HT100 voltage tester and it's excellent,was thinking of getting one of their smart meters but there are so many to choose from its hard to decide which one is best,love your reviews

[@KeepOnTesting]

Thx my friend! My favorite is the Kaiweets ST600Y thus far...incredibly vibrant colored display, loaded with functionality and great performance! kzbin.info/www/bejne/hGHCgamAhpdpkNU

[@pikricky]

@@KeepOnTesting Thanks for the recommendation,I think I will go with that as you can keep it in the case and still plug in the leads as apposed to the 601 where you have no access to the on/off button or lead connectors because they are at the top and bottom of the meter so you have to take it out to plug in or switch on and off

[@radius.indrawan]

What a start for KAIWEETS Weeks! 🤩 The APO button is genius! Great job KAIWEETS. I also love the diode test beep, but hey, does it also beep when the leads are shorted? if it does, then it would be a nice puppy for short-circuit hunting. 😁

[@rickoneill4343]

Just watched the review. Great to see you also hit on the points I mentioned. I also noted the ncv is very poor. I had high hopes for this meter. Look like I need to get a brymen from Dave.

[@KeepOnTesting]

Hi Rick. All things considered still I think it's a great multimeter nonetheless..especially bearing the "smart" label. It's not a Brymen no doubt but a worthy contender in the CHEAP-O Realm. 😃👍

[@rickoneill4343]

@@KeepOnTesting totally agree for the price hard to beat.

[@franckzr2]

Really nice video, thanks for your time. Long life.

[@KeepOnTesting]

Thx Francois 👍

[@SevenDeMagnus]

Thanks again for this. Is this type of "smartphone" multi-meter colored LCD the size of a smartphone's screen considered high-drain, mid-drain or low-drain when it comes to energy consumption? Keep up the amazing kindness, heroic virtue of diligence and variety. God bless, advanced happy Easter.

[@andrebalsa203]

I am still not convinced by the "smartphone-like" format of these multimeters. The display is certainly nice (apart from the terrible glare), but that's basically it. For now, I'll stick with the more "traditional" DMMs from Fluke, UNI-T, Aneng, etc...

[@KeepOnTesting]

I love my traditional style dmm as well but if you can get over the smartphone style concept it's actually a pretty sweet setup.

[@bhushan9066]

It would certainly happen in the future that smartphones would include multimeters in them or vice versa and I'm all in for it. Imagine you're watching this channel in a multimeter!

[@bamaboy6207]

nice upgrades kudos to kaiweets!!

[@phillipw2493]

Nice for like you said on the go and pocket size

[@KeepOnTesting]

100%

[@simscoordinator]

That Kaiweets multimeter looks cool!

[@KeepOnTesting]

Oh yea!

[@three-phase562]

Nice review, pretty interesting meter with some quite good specifications given its price. Thanks for taking a look at it.

[@KeepOnTesting]

Thx for watching 👍

[@AiOinc1]

Interesting meter from Kaiweets there I'm not used to seeing the "smart" form factor Oh! And the frequency counter does duty cycle too. I wonder how accurate that is? It could be very useful. Should do like the old MotorWeek videos - "Hits and misses" with comparable products for the price point

[@KeepOnTesting]

Thx for the feedback 😀 👍

[@yambo59]

An impressive design on Kaiweets part, as often the NCV needs much improvement, the continuity as well and that power button is badly placed, too easy to hit it when not wanting to. But - even though I usually dont care for smart phone style meters this one really shows big steps forward in this type of design, with just a few tweaks in the right places this can be a top contender.

[@KeepOnTesting]

This series has totally changed my mind on SMART TECHNOLOGY...these are impressive multimeters!

[@MikeC-nl3vu]

Another great review Darren! I have the same meter in red under Astroai brand. Nice little meter for sure. Some negs are continuity def slow and lead jacks on the bottom. Also, I reached out to them to see if I could switch display to always show Fahrenheit instead of Celsius but was told you can’t change that, Fahrenheit only shows when in temp mode. Overall it’s a really nice meter.

[@KeepOnTesting]

Thx for the update Mike.. 😀👍

[@farlusberner8986]

It cannot be changed to measure only in Fahrenheits as other sites measure in Celsius.

[@AubreyKeck]

definitely a step up from the HT112B.

[@KeepOnTesting]

😀👍

[@tanishqbhaiji103]

I could sure use a kaiweet clamp meter.

[@KeepOnTesting]

Clamps are good.. especially KAIWEETS!

[@samdeur]

Just subscribed to your channel. impressive work.. Thanks for all your content. i'm Comparing the ST600Y with this KM-601. First google Search i did landed me on Durability matters and he says that the ST600Y is a scaled down version of the KM601. the KM601 costs 44,17 from the Kaiweets aliexpress official store so not to bad the ST600Y 35,25 not a big difference. The KM-601 is 50% cheaper then something like the Brymen BM235 that's 86 euro.. and i'm just starting of and wanted to look to upgrade from My Lidl multimeter .

[@KeepOnTesting]

Welcome aboard! 😉👍both of the KAIWEETS are very good multimeters, I do prefer the display of the ST600Y but the 601 is still the King. Btw, HABOTEST HT118A is also a very solid choice although it's not a SMART multimeter.

[@johnboyd1167]

🤙 Looks nice and compact ... now to create a universal stand for all make and models 🤑

[@AnanusBananus]

These meters Look so fancy nowadays.

[@KeepOnTesting]

I'm telling you..they are getting better looking by the second !

[@gieauto7175]

It is nice but even my cell phone drives me up the wall when accidently touching the screen.

[@kahlid-ataya]

4:00 i see you 😎

[@KeepOnTesting]

Boo! 😃

[@koonley]

KAIWEETS! But I notice there was no capacitance test?

[@KeepOnTesting]

10/10 no problems..Just negated from the review because of the video length..😀👍

[@koonley]

Sweet!

[@imun1ty]

Great review thanks

[@KeepOnTesting]

Thx my friend 👍

[@LordFpv]

Woow,great multimeter...i like it :) Thanks for review 👍👍👍

[@KeepOnTesting]

Great stuff! 👍

[@dj_sorra8605]

Identical to Hobotest HT116

[@donparker9856]

Love Kaiweets week!!!

[@KeepOnTesting]

Cheers Don !! 👍

[@danadarya2983]

I have the same (Gvda) multimeter this, Is a great quality and accurate device in, Reading voltages.

[@qolbunsalim5188]

I sometime considered to buy this gadget like multimeter. But then I was also thinking about its robustness, especially its big screen. Screen could be cracked in a tool bag or dropped on concrete. Multimeter is a tool to help my work, i need it strong n ready when i need it. I already have cats that sometime i think they are bosses at home. No multimeter boss.

[@KeepOnTesting]

Keep it in the case and even your cats won't scratch it 😀👍

[@electronone5219]

Kaiweets is so sweeeeets. So far, I have the Kaiweets HT118A which is like the Habotest HT118. For the price I think it's a good meter. Thanks for the review. Please register me for the contest.

[@KeepOnTesting]

Sweeeeet! Done ! 😀👍

[@parlenkow]

I buy one i am happy with this meter

[@KeepOnTesting]

Excellent!

[@rodsofgod6863]

Kaiweets my God what a beautiful name!!!

[@KeepOnTesting]

😀👍

[@SevenDeMagnus]

Hello Darren Walker channel friends. Could you use Energizer Ultimate Lithium AAA batteries for this amazing KM601 multimeter? Also could you use rechargeable lithium batteries like VapCell 1.5v AAA for this? Thank you. God bless, stay safe.

[@KeepOnTesting]

Hello my friend...yes to both. Although rechargeable batteries probably won't last as long as regular. 👍

[@SevenDeMagnus]

@@KeepOnTesting Thanks. Create a new series for 2023 and beyond wherein you modify the subcomponents (maybe better branded caps, OLED, shielding, proper grounding) of the insides of the gadgets. Start the 'Make it Way Better' series with the amazing KM601 :-) God bless, Rev. 21:4

[@KeepOnTesting]

@@SevenDeMagnus That's a great idea. Thx for sharing. KM601 is definitely amazing!

[@SevenDeMagnus]

@@KeepOnTesting Yup. Btw, I painstakingly bought Energizer lithium batteries (they seem hard to get, it used to be in drugstores- must be the battery shortage), it seems more alive and may even be more accurate and a little bit longer range in the NCV function (it can detect things through the plywood it couldn't before, some switches like the Philips have panels that too thick though, it can't detect it- I hope you find an elegant modification for its NCV :-) By the when when do you remove the batteries, how many days in storage before you remove the batteries to keep it from leaking and draining? Also, Linus Tech Tips went back to corded security cams (coz' it's tough to recharge batteries if there are a lot of security cams), what improvements that's still affordable will you improve in their design (perhaps it can be used on multimeters without soldering for those who don't go out of the field): kzbin.info/www/bejne/mIXTfIBqaLubraM Thanks :-)

[@SevenDeMagnus]

@@KeepOnTesting Hi, happy Lenten Season & advanced Easter (the most important day of all). This could be an example of a gadgets modification series (best to put it in a Playlist so it's continuous while we do projects it's playing) you could create for 2023 into the end of the 21st century 2077: 'Paano Lagyan ng Range, Min/Max at REL - Delta Relative Function ang Zotek ZT102 Digital Multimeter' on the channel 'DIY Pinoy Teknisyan'. The Zotek ZT102 mod there, I'm not sure how he figured out where to solder the wires & where he got the idea but he turned the US$10 ZT102 (recommending to review this coz' of it's huge modification possibilities) into a US$25 to US$30 multimeter. :-) It's like he overclocked a 3.5Ghz to 7Ghz to 10.5Ghz and it looks cool too w/ those Game Boy SP tactile switches, like Mad Max 2, like cyberpunk. God bless, stay safe, see you all in heaven as Revelation 21:4 describes.

[@guateque1718]

I will stick with dumb multimeters for now BUT these smart meters are improving quickly.

[@KeepOnTesting]

Fair enough 😀👍

[@Basketball7200]

A nice looking multimeter!

[@steph2211]

Love it just love it 👍

[@KeepOnTesting]

Yeaaaaa baby 😀👍, you know you WANT one !

[@steph2211]

@@KeepOnTesting that would be a dream.

[@atharhashmi5762]

very nice good work my life best rivue ever seen im ompress

[@KeepOnTesting]

Thx my friend!

[@jeremyhodge4249]

Kaiweets km601 has been great I love kaiweets

[@KeepOnTesting]

Agreed, Kaiweets is awesome 👌

[@rickoneill4343]

I have yet to see your review but I also have this meter and I have to say this. Beautiful display but the continuity mode sucks. Even with good gold probes and meter set to continuity mode not auto. If you do cell and computer repair avoid this one. Needs a stand. Flashlight is weak. Probes on bottom are ok but I think I prefer them on front especially with no stand.

[@KeepOnTesting]

All valid points 👉 Really miss the tilt stand !

[@computersrepaircotesaint-l7407]

perfect reviews thx

[@KeepOnTesting]

Appreciate it 👍

[@mauricepetit9986]

I love Kaiweets!!!!!

[@OKBAOK]

👍🏻🙂 Thanks Darren for the review, another barabing baraboom!! ✌️😀

[@KeepOnTesting]

Hehe..Much Thx!

[@kcuhc84]

KAIWEETS is an anagram.

[@akcoord9615]

best one but still not full smart

[@evelyn.abegab06]

I love kaiweets!!!

[@KeepOnTesting]

Oh yea!! 👍

[@kianposerio644]

I love kaiweets

[@birdost12345]

you happy me happy :)

[@bhushan9066]

Professor, how did you create the Powerpuff Girls?

[@rjblank2003]

Calling the meter Cheap O is probably frowned upon by the company.

[@KeepOnTesting]

Not really..it's actually a good thing! Why spend more than you really need to..! CHEAP-O Multimeters have been a lifesaver for many and it has absolutely nothing to do with quality or performance! 😃👍

[@peterhughes9903]

awesome

[@krzysztofg2025]

👍

[@bhushan9066]

Kaiweets 😉

[@c.s_C.S399]

Give me tha kaiveets

[@KeepOnTesting]

😀👍

[@c.s_C.S399]

O no kaiweets spelling mistake