Kalibrgun Cricket receiver disassembly

[@Jumetrog]

Very helpfull on how to put back in the hammer. Is just what I searching for. Thank you.

[@mikaelsaarinen9716]

Thanks for helping, I do all kind of services for airguns.

[@airgunsgto5551]

Mikael Saarinen hi how can I take the think of the think hi dint

[@kmhusain52]

Thanks for sharing this experience.

[@henk9115]

Nice and tanks from the Netherlands

[@eddo5617]

No no no! Do not drill the hole on the other side!! The pin will come out! Get a dremel scores the pin lightly, and use a small vise grip (not needle nose type) pull it straight outward. Once the long pin came out you will be able to sneak the plate out. You can replace it with a new pin, new pin can be found on ebay.com. 2.5mm OD pin. I hope it helps!

[@ilpavo1983]

many years have passed since your comment but I try the same to ask you a question, sorry for my English but I'm Italian and I'm using an online translator. be able to make a video to make me better understand how to extract that pin? or post me photos? I have to remove that plate at all costs ...

[@mahersamman7692]

Hi can you show me how to extract that pin in pictures or a video Ill be very grateful thanks

[@BlueHW100]

nice tutorial and helpful too !

[@luojakeluo7494]

helpful

[@chphoo]

Thanks for sharing. It's really helpful

[@mahersamman7692]

Hi have you managed to get that pin out for the plate and if so how thanks

[@Moby14632]

Excellent video - nice camera work. Guessing you must be an engineer of some sort - exacting in your details - I have 3 son-in-law engineers. Anyway, wondering if you've found a way to remove the sliding plate that's causing all the "rough grinding" noise when cocking....? My Cricket BP has it & I'd sure like to get that plate out to smooth it up somewhat. Thanks in advance & ATB, MobyMyste in KS

[@PeakyBlinder]

Couldn't you buff that slot in situ, if held to the right, you could polish it as far back as the pins as the right side of the slots is what would be under pressure when cocking, Only thing is you would need to clean it real good. Top vid btw 👍

[@russinbaja]

The part you show as not being removable is broken on my Cricket. As far as I know Kalibr does not have a warranty. Any suggestions? I would show a photo but am not able to here.

[@ommando]

Can the installation of .22 caliber barrel instead of 6.35 caliber barrel

[@eddo5617]

Do not try to heat the aluminum breech! Which it won't work with your normal torch anyways!

[@antj211]

My cricket will not cock. I believe the search isn't engaging. Can you make a video with details how to fix?

[@tilakrawal4986]

How to remove that slide plate ..??

[@auat4725]

Hi. I am Vietnamese, I love what you are describing. But in my country they banned to buy that. I would ask if you have size drawings about it. Thank you.

[@mikaelsaarinen9716]

Whats that tool which you use to pull out the axel? And where I can found that? Is it elecromagnetical?

[@4speed71]

It is just a little flashlight with a magnet on the end. Any magnet should work unless yours was installed dirty or tighter than mine.

[@Osmar__Sosa]

4speed71 Can you please give me your mail, I want to make you an inquiry regarding kalibrgun cricket, me is [e-mail]

[@vanquyet5252]

Hello ! I verry like your videos! I wanna buy this one! Can you show me where is buy it! Just this part , not full airgun ! Sorry because my eng so bad! Thanks !

[@ilpavo1983]

many years have passed since your video but I try the same to ask you a question, sorry for my English but I'm Italian and I'm using an online translator. be able to make a video to make me better understand how to extract that pin? or post me photos? I have to remove that plate at all costs ... please :-(

[@Osmar__Sosa]

Hi, I want to make an inquiry, regarding breech of kalibrgun Cricket .22, please you can give me your mail to attach some images.

[@wuguoming77]

有人能翻译一下吗？

[@mikaelsaarinen9716]

Thanks for helping, I do all kind of services for airguns.