KaliberGun Cricket Regulator Removal, Disassembly, Adjustment and functions

[@thomaswhitmore2020]

This info is still helping us all these years later, thanks Ernest you really are a blessing to our sport. I recently acquired a Kalibrgun Cricket Compact .177cal in a trade and have been watching all your Cricket videos over and over and have been having a great time. If by some weird chance you ever decide to tune guns for public again I’d be honored to have you set this .177 Cricket Compact up for me.

[@fisherman4042]

Now I understand why my cricket leaks air through the regulator and I haven't been able to go hunting for pigeons for 1 year. I think I need to put new o rings on it🤔,thank you very much bro.

[@kmhusain52]

thank you very much ,this was very helpful to undersand the principle of regulators in general and the Cricket reg specifically .You are a great person to share all this knowledge and informastion with people who need to know.

[@MrKevinbrian]

Earnest, this is AWESOME information. Thank you SO much for taking the time to do it.

[@kmhusain52]

Thank you very much for this nice piece of work. Very simple and clear instructions. Appreciate you time and effort.

[@justovelarde3456]

Excellent video. Congratulations. A question, WHAT is the best regulator value for a cricket tactical II 60 in .22 caliber for 50 meters? Thank you so much.

[@MDCORPORATION]

Seguo, mi interessa molto

[@justovelarde3456]

@@MDCORPORATION 125 - 130 BAR.

[@Exziver]

Excellent job! Now I don't have to take mine apart to figure out how it works.

[@PeakyBlinder]

Such a shame fx caught you in there net.

[@chatinh7710]

Thank you for sharing your enthusiasm

[@jb8204]

Nice video.thanks

[@radumihai7419]

Do this changes with the "springer" bring more power to the gun?

[@ktu668]

Hi Great vid I done everything just like you say only used huma air reg when I put everything back refilled the gun to 100 bar to try there is no air going into the chamber pull the trigger just a click to air at all any ideas what I've done wrong please.

[@mughram]

Thank you for sharing this !

[@rodrigogsmj]

Congratulations on the channel. Some questions to help me out. Is this system the same as the one in the Cricket 2 WSA? Can I increase the regulator pressure just by opening that Teflon seat very, very slightly without needing to adjust the regulator plates? Thank you 🙏🏻

[@EzH0fm4nN]

Greetings from France Sir. If you come back arround here, just a quick question. My Cricket (carabine model but same mechanic I guess) has got a sudden loss of power. When I got it, it was shooting between 260 & 263 m/s. Now, it's only between 220 & 223 m/s. Any idea where the missing 40 metters per second are gone ? I can't hear any leaking. I was thinking about a problem with the regulator but well, the shots are well regulated, just like before when it was shooting at 260. Just, now, it's regulated between 220 & 223 instead of 260 & 263... I'm not sure what's happening. Your thoughts would be appreciated. Thank you !

[@AirgunBrasil]

Excelent! I have a question. I have a issue in my .25. First shot is about 232 m/s, second shot 252 , next 259 , 263 than reach 266 m/s and stay around that number. BUT.. if stop shooting for a while.. like 10 min, the first will be 250 m/s. That happens becouse the unregulated air keeps filling the chamber, I mean the regulator ins´t sealing 100%? It is oring problem or just a screw adjustment? Tks for the help.

[@kmhusain52]

It would have been nice to advise the approximate velocity of a 25 grn. Pellet change per a quarter of a turn

[@ernestrowe6974]

each gun has a different sweet spot , could vary from 870 to 920fps. each reg and spring preload is different from gun to gun so there is no set speed per quarter tune.

[@wewekokowe6887]

Hi Ernest, where would you install a transfer port restrictor, is there such out there. the same for a Vulcan. Any idea? thanks

[@MrLing13579]

How many pounds can the constant pressure valve of Cricket.25 be adjusted to?

[@rcnut26]

Hi Ernest - thanks for all your videos. I have the .25 cricket and fist shot after a fill is about 980 fps. Subsequent shots drop in nicely at 960 +/- 3 fps. If the rifle sits for over a minute the power comes up again. It seems like the outlet chamber is slowly gaining pressure. This is with new 90 durometer orings installed in the reg. The reg is set between 115 and 120 bar. Any thoughts?

[@rcnut26]

Spencer Johnson Actually, using your 1/16 punch trick, I think the reg was set higher. Anyway, the power creep up is annoying. Have you seen this before?

[@AnwarAli-to2dt]

Have good day sir i am from pakistan i have one qustion sir wher i found somr extra regulater for cricket .22 and how to polish tool can you say the name of polish

[@fisherman4042]

My cricket has an air leak, but I don't know which of the two regulators is failing😢

[@mandroit2011]

How many kg/mm ?, the disc spring constant for single spring' Tank You very much !

[@antoniodicappo403]

Hi, can you please give me the size of the Belleville spring washers? The OD the ID and the thickness of the washer. Please be as accurate as possible, thank you so much.

[@pilomas1]

Hola, exelente video, queria saber como dar mas potencia a los tiros a traves del regulador ó válvula. Saludos.

[@maxscrafts1161]

hi Ernest i have a sub 12 ftlbs 177 cal when i chrono it i get a fps spread of around 20 to 30 fps but get the odd 50fps spike for 2 or 3 shots any ideas of what could cause this

[@beretmp15]

Isn't it possible to sit regulator without the spacer? What would the numbers look like set this way?

[@ernestrowe6974]

can't vent hole wont lineup and the air tube will leak

[@tomiiwnl6631]

Hi ernest, excellent video I want to know what the best settings of the regulator washers as my cricket 5.5 has this (()) (()) (()) ((((( And walk in the 890 fps and I want a little more power, greetings from chile

[@danielesalvini2051]

To increase power How should the regulator be adjusted? Thanke you

[@ShayanQuanta]

Valve oring need to be removed?

[@ernestrowe6974]

you have a uneven seating, must lap a new seat on the delin adjuster

[@cuonganonymous7515]

anh ơi cho e xin bản vẽ thông số van điều áp được khômg ạ

[@2AirgunNerds]

What lube do you use in the regulator?

[@ernestrowe6974]

Super Lube Silicone Lubricating Grease

[@bullet68x]

Ernest Rowe Has the Super Lube replaced the Molykote 55?

[@ernestrowe6974]

(()) (()) (()) (())))

[@ShayanQuanta]

(()))) (()) ?