CATIA V5 - SURFACE TUTORIAL | MODELLING A SPOON

[@veeramallusatyanarayana8787]

I want to mention steps one by one to complete diagram 1) draw top view in xy plane 2) draw side view in zx plane 3) create points in zx plane at specified diatance 4) draw arc using three point arc and join to points 5) click on sweep, select reference plane, select on 'creat extrude', and then select profile, and guiding curve. 6) repeat above steps, except the guiding points replaces reference plane. 7) after completion this, join the sweeped surface which was done in above steps. 8) extrude the top surface, click on split, join and extrude and press on 'other sides' option 9) right click on extrude and press hide. 10) go to start option, mechanical design , part design and add the thickness to profile by click on pad. 11) finally, go to tools, hide, click on all planes, all sketches. 12) thus you get the required spoon, which you want to draw.

[@mohammedabduljawad3682]

Kamran bhai how you have taken 20 distance in front view of 40 radius curve

[@saketchoudhary2335]

Nice guide, thankyou!

[@arifmartoyo]

Thank you...

[@KamranYunusDesigns]

You're welcome!

[@mbaskar0033]

Thank you bruh usefull

[@KamranYunusDesigns]

Thanks for the appreciation. Please like share and subscribe 😀

[@sua.4976]

thank you for the video! i've done the exact operations as you do however i cannot achieve join operation, there's a connexity error between sweep 2 and sketch 4. how can i solve it?

[@KamranYunusDesigns]

That should not happen, but I guess you’re missing some steps maybe extract or something. Just keep trying or do one thing try to do it your own way without copying. Anyways a subscribe n share will always be appreciated ☺️

[@likhithkumar7124]

instead of 31.2 put 31.42 while taking plane

[@MostafaAntam]

How i can find this spoon design 2D

[@deekshithl3758]

can u please share the drawing

[@KamranYunusDesigns]

make sure you like share & subscribe :) grabcad.com/library/spoon-238

[@sakthivelk3896]

i m having difficulties while splitting it shows error as i click join and extrude what should i do

[@KamranYunusDesigns]

Please check for join and make sure your extrusion covers the whole join surface. I guess u must have missed some part in sweep operation. Check and let me know 😀

[@arifmartoyo]

Thank you..

[@KamranYunusDesigns]

You're welcome