How To Paint Mazda Soul Red 46V…

How To Paint The Trickiest Color In The World 46V #46v #mazdasoulred #howto

[@jimserhant7741]

They call it Soul Red Metallic for a reason. You must leave a piece of your soul in every paint job to get it correct. Definitely Not for the faint of heart or amateur. Beautiful work.

[@ShanPrez]

Every time I see this beautiful color on a Mazda I lose my mind! Absolutely stunning color 🙌🏽

[@mohammedcohen]

...me too...

[@robertsigler1615]

We saw it for the first time at night, and it was dirty. And even dirty in the dark it was gleaming.

[@AJapaneseDream]

Incredible work man. As an owner with this exact paint I am scared shitless of damage because there aren't enough people like yourself with this attention to detail.

[@kandyman5315]

Thank you

[@robertsigler1615]

And if you can find the right person, will the insurance cover the additional required cost to get it right?

[@jimt3409]

You are more than the kandy man you are the kandy master. 👍👍👍

[@kandyman5315]

Appreciate the support 👊

[@markfoster7564]

As a Miata owner, with many friends with Soul Red, the matching of paint after collision work has been very “hit or miss” . You seem to have a process that works! That outcome looks fabulous! I’ll be sure to send a link to the Miata community!

[@kandyman5315]

Thank you 💯 😊

[@Turboy65]

This is by far the best red on a production car of the last decade. I want someone to spray some guitar bodies in it for me.

[@mohammedcohen]

....I STARE at that color when I see it parked somewhere...the most glorious red on the market so deep that if you don't hold onto the ground you'll fall into it!!!

[@kandyman5315]

Agree 👍

[@steelresilience]

I work at Mazda Toyota Manufacturing in Alabama. That Soul Red Crystal looks good at all times. Day, night, dawn, or dusk. Frickin beautiful.

[@kandyman5315]

Yes it does 👍

[@robertsigler1615]

We had an MX-5 in Soul Red. Magnificent color. I was always afraid that it would get damaged and need a repaint because I KNEW it would be almost impossible to get it back to factory perfection.

[@mcardlepm]

Phenomenal work. And you really want "mind... blown!" with this color, look at it in bright sun through polarized sunglasses!

[@billbliss2500]

I was very happy that Brian from Paint Society did a video where he kind of helped a little on the red Ferrari project where He introduced you to his people on his channel. I was happy seeing the work that you did on that and seeing some of the custom work you’re doing like on this car. I must say you’re a fabulous painter and really take pride in your work. I really respect that!

[@8m617]

Casually interested in auto paint but never gone past rattle cans (YET!). I’ve always loved that Mazda red (not the car) and wondered what was up with that paint. Now I know! Thoroughly enjoyed the process, skill, and extra steps. Subscribed and plan to watch more vids!

[@achromaticwraps]

been spraying candys for a while and man, that was a tricky blend but you executed it so well. Excellent work.

[@n.elliott9122]

Absolutely love your work brother man. Your attention to detail and the way you explain all the steps is outstanding. Thank you, man!

[@kandyman5315]

Thanks for the support 👊

[@bryanfischbach2043]

Painted my 2000 s10 race truck this color used matrix mpb lv with Ag-40 euro clear...my father in law has been painting since the early 80s and it kicked our ass... super tricky color. Walked out the entire truck like a candy paint job.and it still acted funny. Over all great paint job but completely different look then the mazda cars look.

[@lukepotter5863]

Got a pic? Sounds awesome

[@beemabuildbodystylingrepai1934]

Cool video buddy on our system it’s the normal base then tinted mid coat then clear coat havnt don’t one for a few years now but the first one I did was pretty exciting to do.people say how scary that copper base looks on the normal candy panels lol 😂 great tips for us all buddy and quality as usual 👍👍👍

[@user-ll2en3cu7j]

Great job! I just wish there is somebody as good as you in the Philippines that can do the 46v. Thats just awesome!

[@ivanskorup6523]

Love it! love learning from the best in the trade thank you for the up load

[@kandyman5315]

Glad you enjoyed it!

[@nick3795]

Great artistry, your results are fantastic. Good to watch, thanks

[@jimmycocks]

Nice tip with the transition tape to keep the shape. Never thought of that, Appreciate it. I do the same thing with taping off my blends. Old timer showed me that yrs ago. Makes blending so much easier. Few years back axalta switched from a seperate mid coat to a clear dye... few drops all you need. No more dye back

[@ntonytay]

Always looking great man. Back to the days when this color first launch, its a night mare to spray. In our paint system, its not tinted clear for the candy, its just binder with concentrate red which makes it alittle easier to spray. But man, u do a great job with any paint system. 👍👍. Btw, appreciate if you can teach how to do a soft edge masking on your knees. I tried alot of times and it just didn't turn out straight enough the edge 😅

[@leviscott8519]

Damn, you made that look easy! Thank you for the pro tips Brother!

[@colingater2743]

Really enjoyed this video, great explanation thanks very much.👏👏

[@westfield90]

Much respect. Nothing beats experience.

[@cristiansanchez3787]

Gran trabajo t quedo perfecto no cabe duda hermano eres un profesional le tienes amor a tu trabajo 👏🏼👏🏼

[@juanmata2433]

Awesome job Kandy man. I’ve always done the clear blend before the kandy. Either way still looks amazing!

[@kandyman5315]

Appreciate it Juan 👊

[@dcloder]

Fantastic explanation of what you needed to do and a beautiful result.

[@jeffdickson125]

A+ man. Incredible technique and explanation as well. New to the channel and I'm glad I found it. Cheers

[@kandyman5315]

Thank you glad to hear

[@bradsrestorations1085]

Excellent work and instruction!

[@kandyman5315]

Thank you

[@PhilsArtDotCom]

Beautiful job. That red is SICK! Respect from Texas.

[@kandyman5315]

Thanks!

[@sttm1283]

this was new to me. the candy is in the clear. always was in the belief that candy was layed after a base and then clear..... life is too short to learn new stuff :D

[@kandyman5315]

👊👊

[@joshuashattuck9267]

Great work bro! Autobody painter of 24yrs here PPG for life! Envirobase is great product no complaints its great for collision work. I still go back to dbc for overall jobs . Keep up great work brother!

[@kandyman5315]

Appreciate it

[@charliepepper3601]

Gorgeous color

[@holliscolbert6933]

Awesome work!!👍

[@thistledewoutdoors3331]

Silkkens red sealer definitely helps this color process as well as fords RR...... The Acura NSX is a nice little color as well

[@soundslikebstome]

Masterful job brother.

[@simuncelic7420]

Clears tend to fade when more coats are sprayed is something different with tinted clear. I never sprayed this kind of color.

[@donaldo7656]

Beautiful paint job.

[@richgurl624]

I have a Mazda 3 Sedan in this color and truly I say, this color truly turns heads 😎 I love it!!!!

[@kandyman5315]

I totally agree!

[@pd9888]

i would never buy this color. i've heard for some accidents, insurance will total the car- the paint is that expensive and difficult to correctly lay down. this thing had a ding on 1/4 of the door, and half of the car ending up getting painted !

[@mohammedcohen]

...that color is my absolute favorite!!!

[@pd9888]

great work. I've heard these are a royal pain, you did a super job. that's the only way to be, top quality, there's enough hackers in the world- in every industry. Thanks !

[@mephistodream1]

Great video! Thanks

[@fulltiltboogie5321]

Hardest to paint??? You made it look simple!! You are an artist.. great job. Thank you

[@kandyman5315]

Appreciate it 👊

[@GE.1962]

Absolutely beautiful job Kandy Man! I have a soul red mazda, and as nice as it is, I wouldn't get it again, chips too easy. Just today a car in front of me kicked up road debris and it hit my pass door and chipped it. I'm not happy.

[@jerryvikla3925]

Excellent job! The 2 happiest days of my life were the day my wife bought a Mazda with 46V and the day I sold it! I read after I got rid of it that Mazda had some paint issues with it chipping, not sure if that is true but the hood was so full of rock chips that I almost repainted the front clip.

[@edjackson4389]

They're beautiful, but unfortunately you give up some durability with pretty much any 3-stage paint. That includes pearl whites. They're a little easier to chip and more likely to fade if it's a color in the red family. Also, Im sorry to say your wife may be a tailgater. That's the most common reason for excessive rock chips in the front bumper and hood. Driving too close to veihcles in front of you. Especially semi trucks. No offense, just relaying the facts. Im sure your wife is a lovely person.

[@ThatZwassup]

@@edjackson4389tailgating or not the rock chips are inevitable. I own a 22 MX-5, it’s my daily and being from Colorado means a ton of elevation changes. I swear I will be in the far right lane going the speed limit and a semi 100 feet a way in the far left will throw a random rock chip on my hood with the winding roads like I-70 and I-76 here. Throw that in with so much traffic and everyone blowing by you going 90. 15k miles in and I’ll probably have to get a respray soon if I don’t end up wrapping it instead

[@hobbyautobodyfun9315]

Well now I know why they call you the candyman . Your color matching candies. Nice

[@gtuttle4]

I definitely learned something today! Amazing!

[@kandyman5315]

👍👍

[@user-yb2tp4qf1r]

And I had problem matching BMW alpine white 300 🙂 Awesome paint job.

[@cozza819]

Lovely work to see.

[@adfreeviewer9005]

Phonemenal job ! Thank you for the video

[@samg5543]

yes, lose that blend on the high, convex spots over the wheel wells! helps a ton

[@BMfixit]

Love to see somone doing it right. Way to go

[@kandyman5315]

Thank you!

[@olafvanleuken6101]

Nice, im in love with tis coller ❤

[@Kustompaint2026]

Phenomenal work!!!!

[@kandyman5315]

👊👊

[@shawnaguirre1690]

Clean 👍 awesome job. Painter and cameraman , 👏👏

[@kandyman5315]

Thanks 👍

[@mohammedcohen]

ALWAYS take pride in your work!!!

[@Lee-mn748]

Outstanding job.👍

[@kandyman5315]

Thank you

[@Enduro-Life]

The amount of information being divulged by Kandy Man is really appreciated, a true professional in his field.

[@kandyman5315]

Appreciate it

[@JohnWD40TC02]

Beautiful colour and a beautiful finish on the 46V Kandy Man you make it look so easy, I've done this colour once and it came out fine but for some reason the mid coat isn't a true candy in my scheme but it's a basecoat binder with a couple of transparent tinters to get the candy effect, came out looking nice though👌🙏👍John UK

[@kandyman5315]

Thanks John

[@HackMasterBlaster]

In ultra BC8 it’s a clear basecoat with a red toner. Usually water based systems will use tinted clear not so much with solvent.

[@edjackson4389]

@@HackMasterBlaster I use PPG Deltron (solvent based) and most candies I fix use tinted clear basecoat as the candy layer. Only a few colors are the exception. This Mazda 46V and Fords RR, and few others use the tinted clearcoat method he's demonstrating in this video. So, you never really know til you pull up the formula. As beautiful as they are I despise these colors. Insurance companies rarely pay enough to compensate for the extra labor and material cost associated with these candies.

[@HackMasterBlaster]

@@edjackson4389 I sprayed PPG Deltron at one shop and you are correct, they do use clear for mid coat but in most solvent systems it is not the case.

[@juhis6969]

Really awesome result🙏

[@kandyman5315]

Thanks a lot

[@charliepowers5265]

That was a great job.

[@ryannichols8315]

I'm curious why there's a difference between ppg and Sherwin on this color. My system calls for a black sealer. And use the black sealer and number of base coats to determine how dark you color will be. And I am definitely a fan of the darkest 46v. I painted my Abarth this color when 46v first came out. It looks great but I added a little copper over my base, just a drop coat. Unfortunately it made it brighter, and I regret it, although it does looks amazing. As a custom painter I like to make my cars have that unique color. My dream job besides painting custom cars custom colors and designs would be to create colors for manufacturers that want to venture into flashy colors.

[@tjrenegade9807]

Thanks for posting this, I have the same car and color...

[@rafalkronig505]

Super good mate 👍

[@kandyman5315]

Thank you 👍

[@vasiliskaradimos]

Master paint job... 🎉🎉🎉😊

[@kandyman5315]

Thanks for the support 👍

[@linedog19delta]

Outstanding . WOW .

[@DaveInCanada081]

Awesome👍✅️

[@mattdamiron]

New subscriber here binge watching all your stuff, I use glasurit 90 line waterborne paint they really make this color so easy to spray and match sprays like any tri coat I would love to see you and paint society colab and try out the product and give it a review

[@kandyman5315]

Thanks for subbing!

[@KdAB-mo4hv]

I knit the clear back in also. A lot smoother transition

[@kandyman5315]

👊👊

[@neilgunns8391]

I love that color. Wanna paint my Busa that color.

[@timmygiles9554]

Great stuff

[@mitchellferre1652]

This color looks like a nightmare to match. Well done.

[@ingeniousmechanic]

Man that's solid

[@miguelangeliranzoarroyo9585]

Maravilloso .... Estupendo...

[@TheAnonymous1one]

Great video very informative

[@kandyman5315]

Glad it was helpful!

[@kingsway731]

My paint manufacturers formula for this has the candy mixed in the clear base like a pearl tricoat. I couldn't get it to look right until I started putting the last bit into my first coat of clear and finishing like this. I hope this might help someone

[@bernardkroeger4045]

Well done again. I really like your positive attitude to life and work. If it's worth doing once, it's worth doing right.

[@kandyman5315]

Yes! Thank you!

[@wbdl62]

Samcrac's Stepmom told me to come here. She was right as always. Always loved this color, didn't know that it is so tricky to get.

[@kandyman5315]

Thanks for coming

[@jasonb8569]

Thanks for sharing I've been adding your tips into my daily routine. When you're spraying Envirobase do you use blowers in between coats of base?

[@kandyman5315]

No just turn up the heat a little

[@themadlads1231]

Does anyone know what song he uses in the background? Sounds dope, also good job man on the paint

[@976charlie9]

Why not run the base along the entire side (accept the top)? Beautiful work.

[@michalkarkowski4322]

you are amazing !

[@kandyman5315]

Thanks for the support

[@lex.cordis]

Amazing job. Very impressive blending. I have a guitar I would like to paint like this. How could a regular Joe like myself acquire the materials you used for this paint job?

[@kandyman5315]

Check out your local ppg store

[@lex.cordis]

@@kandyman5315 Thank you.

[@alangross2277]

Awesome job! Is the Mazda Machine Gray Metallic, another three coat paint, the same process or is it easier to blend?

[@kandyman5315]

Both difficult

[@marcussantiago4816]

Car is badass!!

[@jake.7213]

Hy. I have a question for u man, i love these color and your work is excellent. My question is that when u are spraying these colors u use the same colors just more coats or do u use different colors in each coat? I am a nooby in these kind of thing but i want to paint my car like this.

[@kandyman5315]

This is a 3stage paint ground coat, kandy ,clearcoat hope this helps 👍

[@salty6pence672]

God I love that color. Hey you did it in 2 stages. i thought it was 3 layers? An light absorbing flake layer, a fine aluminum flake layer and then the pigment layer.

[@kandyman5315]

Yes this is a 3stage

[@Matchlessoriginal]

Great work! What technique do you use to avoid mottling in the candy stage?

[@kandyman5315]

Dv1 gun is great help overlap and walk the panels

[@dreamlab311]

I have a CX30 in this color and I dread ever having to match it. I'm saving this video just in case.

[@kandyman5315]

👍

[@dazmills99]

Nice work, I paint this quite well using tinted clear. Shade used is key and percentage of tint/clear. Have you painted 51k rhodium white yet? 😨 this is my new nemesis 😅

[@kandyman5315]

Not yet thanks for the heads up👊👊

[@mds3955]

I love this color Mazda 46V soulred metalic, May I know what is your base color (orange silver color) before candy color. Thanks. I have paint this color but it is very difficult to get the right color. It usually view color from the side does not match good. Thanks.

[@kandyman5315]

Salmon pink

[@chilltify]

Nice

[@kiethholland3650]

This is exactly how i prep snd paint

[@ShofiaMirfad]

Nice job bro.. Anyway, how much ratio for your 2021 clear : vm 4350 before you using regular clear ?? Really Appreciate it 👍

[@kandyman5315]

Depends on how much you need computer tells you

[@JuanPerez-dj3bh]

Nice job

[@kandyman5315]

Appreciate it

[@mds3955]

Hi, Kandy Man, I really like your work on painting this car with 46V Soul Red Crystal. I'm also working on this color in Indonesia but I'm having difficulty, sometimes the first layer isn't dark enough, I add the next layer and it will be darker. Is it true that this color uses paste? Thanks.

[@kandyman5315]

I'm not sure each paintline is different

[@Old-dog-jams]

Man this gives me booth envy lol

[@northwestoff-roadopportuni7176]

Yeah budddy 🎉

[@iversonjcameron]

I want this fir my 22 GR86.....41v or 46v?

[@javiermercado5221]

Your going to love 100Line

[@kandyman5315]

💪💪💯