2003 Mini Hatch 1.6L Petrol Clutch Replacement

07376369067
www.williamsmo...
Support the Channel and Donate:
www.paypal.com...

[@carlpentney1166]

My missus says, "why is he not swearing like you do?"

[@jonnysl6560]

THIS MAN REALLY EARNS HIS KEEP DOING JOBS LIKE THIS IN THIS WAY . MANY PEOPLE WILL NEVER KNOW OR REALISE . WATCHING THIS VIDEO REMINDED ME OF WHEN I WAS A LAD WORKING DOWN THE PIT . MY BEST WISHES GO TO YOU KEVIN . YOU ARE ARE A 100% GRAFTER .

[@WMCS]

Jonny Sl thanks a lot for the review... it’s always great to hear from a fellow mechanic... you’re absolutely right it is a tough job this ... as you would probably agree unless you pack a bit of grit it’ll be very hard ... so I take it you’re retired now ...

[@simonmorgan7981]

I've got to change my sons gearbox 2nd gear syncro has gone. I'm a hgv mechanic for scania,I would not do that on the floor hats off to you mate,going to get my mate to it !!

[@simonmorgan7981]

Stick to working in the workshop!!!

[@zwiftinglloyd9666]

I just did the same job and found this video very helpful but just to note to anyone doing one - there is no need to drop the subframe at all. Once you have the front end module off - the gearbox comes off and out the front with no problems.

[@WMCS]

Thanks for the input .,, 🍻🎄

[@croco33cristian70]

M8,you are earning your bread really hard.Congrats,wish you all the best!

[@ra-moto1482]

even when it's raining... you are so hardcore man

[@Bijou-Bob]

Nice work 👍👍 Ive got a clutch to do on my mini cooper R50 so watched this to pick up a few pointers with no bullshit attached I take it you left the steering rack attached to the column and subframe Cheers from a retired ex pro👍

[@SooperSkoots]

Kevin i have just bought a mini and alas the clutch is f----- and your video has inspired me to do it myself, only being a DIY mechanic and seeing an expert at work really has helped so much well done mate you really work hard and thank you so so much Kind Regards Mark...

[@WMCS]

SooperSkoots thanks mark. Are you gonna go for it then.

[@SooperSkoots]

@@WMCS I am mate thanks but i have also discovered that the head gasket may have gone too i am not entirely 100% on that yet but i did buy the car knowing there was issues and bought it cheap for what it is as a project, so the clutch is the first job when it comes, i will be doing it step by step exactly have you have done it, are you local to Warrington ha ha....

[@SooperSkoots]

@@WMCS Hi Kevin do you know if my car has a dual mass clutch it a 2006 1.6 cooper park Lane edition, as i am a little confused which clutch kit to buy many thanks Mark..

[@WMCS]

SooperSkoots it won’t have a DMF it should be a VALEO maybe at about £110 plus vat.

[@SooperSkoots]

@@WMCS your a star mate thank you for that much appreciated....

[@edwinschimmel1010]

Thanks for the Video, we replaced the clutch for the first time. It worked fine whit the video. Thanks. Ggz Edwin and Milan (netherlands)

[@thecluckanator]

this was fantastic, my thrush bearing is about to collapse, attempted to call you a couple of times, but goes to answer phone, sounds like your a busy man ill give it a go my self!

[@lbennett5297]

Kevin, this video really helped with a clutch change on my mini one. Thanks for taking the time to video it, much appreciated. Leon

[@WMCS]

l Bennett Thanks for the positive feedback

[@baweralpboga7832]

@@WMCS Mua

[@ageinhippie]

Zen and the art of effortlessly wrestling a clutch into total submission haha - A Wonderfully instructive video! And not one word spoken throughout! Excellent work sir! Very enjoyable to watch: 10 outta 10 :)

[@WMCS]

Thank you. Definitely a zen do attitude 🍻😁

[@danwood586]

Thank you so much for the video buddy very well done! Getting ready to do this on a 04 ever heard of a hole in the bell housing from the clutch

[@WMCS]

Dan thanks for viewing the channel. I hope the video comes through ok for you on the day ..,, de gassing the Ac system is advisable beforehand. I’ve seen a few damaged gearbox due to failed clutch system ..,, but some of the earlier Mini had a few issues with their boxes as far as I’ve come across.

[@joolzhud]

Great job looks a right ball ache, no wonder there’s so many at the scrappers

[@allanmanson4655]

Kevin, I never realised how much was involved in a Mini gearbox/clutch change. Watching your excellent video, I'm a bit intimidated by the amount of teardown/buildup. Must get me one of those Milwaukee guns though, they're the dogs bollocks.

[@WMCS]

Allan they are indeed. The good thing about the Milwaukee, I can control the Impact of the tool via my iPhone. They’re not too bad really these mini’s. It just requires a bit of patience.

[@EA69X]

Very Thanks. I love this clip. Love the way that you do!

[@jorgeherrera4194]

The dude got paid! awesome video

[@WMCS]

That’s it..🍻

[@vasilispapadellis8022]

Kevin..you must very courageous man to this. I wonder..have you ever been angry with such manufacturing madness? Anyway you are very helpfull.Be well.

[@chriscars3578]

Great video again Kevin brings back memories for me

[@patduffyforever]

Omg! What a job. Just bought an old mini n clutch is slipping, revs too high. I m shocked at the work involved🤯 Great video tho . Thanks

[@WMCS]

Are you gonna give it a go still.

[@patduffyforever]

@@WMCS just had friend look at it n he reckons Its not too bad yet n not too worry til it's worse. Hes done one before so will get him to do when it needs it. I think it's too big a job for me atm. Hes watched you do 3 different ones now too and loves how you took it apart to have easy access to fix part sparing hand damage. Am delighted that with ur vids and his handiness will make it affordable to fix as rest of car is mint. Thank you 🙏 💚

[@brendanbradyfan3589]

Big job but you confidently got there in the end although windy atleast it wasn’t raining

[@markusbrauchle4360]

Hi Kevin, nice video. What special tools should I prepare before? Where do I get such a jack and support frame? Thanks in advance. Best regards Markus

[@robyesidra9490]

Holy shit, you are great man. Really...it is second time I work in my shit midland gearbox, you are a reference.

[@simonsherwood7169]

Respect ✊ hard graft on the deck and outside

[@WMCS]

🍻✨🍻

[@KG-ei6yx]

This looking like way more work than changing the clutch the 03 Ep3

[@amberreinke2924]

Did you remove exhaust?

[@samuelsamuel2543]

Merci pour ta video et surtout bravo pour le chantier dans les conditions dans lequel tu la fait

[@sergiojimenez4850]

Que buen trabajo Amigo lo felicito

[@EssexSilvering]

Great video, .. I am about to do mine, shame you don't cover Essex as I would of got you to do instead. Thanks for sharing.

[@bajaclaws]

woah all that work to replace the clutch that sucks nice work al

[@mini_special]

Thanks a lot for the video. I appreciate the effort of making a video besides a repair. I am just wondering if you drained the transmission fluid but maybe you put it back off camera?

[@WMCS]

Even tho mini says lifelong oil. Always replace. MTF

[@johnkinnane547]

G'day Kevin what a pain the ass what you have to do just to put a clutch in it. You have to just about take the front end off. John PS can't understand the "thumbs down "

[@lezcomeon1]

How the hell do u get to the bolt under the manifold at the top 🔩🤔 and also my mini one 2005 as loads more pipes attached bottom right Aircon pipes etc. P. S so far so good with your video 👍

[@WMCS]

Thanks for the feedback..., mini one does has a bigger box and less room you’re right.

[@lezcomeon1]

@@WMCS had to completely drop subframe in the end 😩 but all back together and running sweet. Thanks again 👍

[@KG-ei6yx]

Question how fun is the mini coopers an also how good are they on gas?

[@RickalRenaud]

Impressionnant !!!!!! 👍👍👍

[@huntersbar]

Hi Kevin, should there be a gap between the clutch pressure plate and the flywheel after tightening the torq bolts to 20nm? Can't thank you enough for your videos and advice pal. 👍

[@WMCS]

Hi Martin... after tightening down the bolts. The main thing is the clutch plate shouldn’t move. There may be a small gaps but that’s from the clutch plate groove to allow air to flow through. So it doesn’t overheat.

[@victorvictor1805]

Great video, easy to follow.

[@nmo888]

Nice job 👍

[@KROUTCHY]

hi mate, thnx for the vid! what's the red stuff on the bolts? thank you

[@WMCS]

Hiyup.,, it’s red rubber grease.

[@bradley6638]

Blimey how long did it actually take? All in all

[@aftabazad371]

Brilliant job Kevin I’m thinking tackling myself Just one question? Do I have to separate the steering rack from the subframe Thanks

[@WMCS]

No you don’t. Really need to. Just follow the exact same steps. You’ll be fine. But keep in mind the gearbox is a bit heavy.

[@hermidiazperez2533]

good job friend

[@shawnhillsryourfaverealtor4152]

Thanks for the video bro, Greeat job !! im about to buy a 04 , and it comes with the manual trans, i just have to put it in !any advice on clutch replacement ?

[@WMCS]

Thanks. Pretty much as in the video. I know some mechanics takes off the subframe instead.

[@shawnhillsryourfaverealtor4152]

You just loosen the subframe instead of taking it out ? I have the front end off

[@rusbelhernandez4834]

Woww great job! congrats!!!!

[@robyesidra9490]

Nice job.

[@adek1707]

What is the approximate cost for change it in this mini ?

[@WMCS]

About 4 hrs

[@LLOPEZJF]

Great video !! ....GREAT JOB !!

[@romaynfremont]

Respect!!

[@WMCS]

✨🍻🍻🍻

[@johncooperworks7404]

salut tu sais comment débrider une mini one de 90cv??

[@carliernicolas2417]

dismantle the berceau cooper 1.6 2005?

[@MegaBartle]

It may be a mini clutch but BMW doesn't give back much change from 2k, just buy a Corsa and a cool pair of Rayban.

[@KevinSmith-cx2hh]

Thanks brother respect

[@walleyman9915]

Best !!!

[@jee2822]

Great video !!!!

[@THEREALWOSPS]

This won't work unless you disconnect the ac lines but if you don't have ac it's a plus

[@WMCS]

.

[@danielevans3947]

I got a cooper r50 can I follow the same steps

[@WMCS]

daniel evans yes exactly the same. I’m gonna do another video this week on a R50.. without having to degas the AC and without disturbing the coolant hoses.

[@danielevans3947]

@@WMCS when I follow these steps does it degas the air con then

[@WMCS]

daniel evans not on this one.. you need an AC machine to recover the refrigerant.

[@alejandrocalvo6398]

Yo lo hice sin desmontar la cuna

[@marcinwartecki7388]

I charge three hundred for this job

[@foxx318]

this car is terrible im sure is not your favorie car

[@millertimebmw]

I know from firsthand experience, recording while repairing takes 2X the time. And in the cold/ wind...., A+.

[@WMCS]

Thanks a lot for the feedback. Just had a look at your channel. You’re definitely right it adds a good couple of hours on the job ., especially getting the light angle right 😁✨🍻🍻.,, thanks for taking time to leave a comment

[@ZSnowman]

My brother, making this job seem so easy when it's not. God bless your heart for the effort.

[@Stravinsky14]

Wow, seriously impressive that you can change a clutch so quickly and not not even in a garage - on axel stands! You are a real craftsman sir- well done and thanks for the video. I read some garages charging 7 hours labour to change a clutch in a r50 mini!

[@WMCS]

Thanks for the support and great feedback.

[@misaelcano5576]

Hey brother if you’re still working on coopers I have a mini that r50 that I need to change the clutch on .. would you be willing to guide me through ? Obviously I’m willing to compensate your time and knowledge .

[@jonnysl6560]

I've subd. Least I can do , RESPECT

[@WMCS]

Jonny Sl thanks.

[@randomhk8634]

Hats down for this guy, seriously he did really good, now I know why mini cooper are so cheap and why mechanics charge high for its repairs, a lot of work

[@x-man4702]

Thanks for the video, did you have to remove the subframe?

[@pboperations]

In this video he only changed the throw out bearing not the actual clutch right? Forgive me I'm still learning

[@andamiro-z7i]

He' a vere good mechanic, I think it's amaziing.

[@mikepeugeot7344]

I have a 2006 mini one with 71k miles. It has a very heavy and stiff clutch. Apparently all older minis are like that but I'm not sure. I've always known modern cars clutches to be very easy. Is this normal or do I need to get it looked at? Thanks.

[@WMCS]

Get it looked at asap

[@patrickjmorgan]

What a bugger- but FWD cars have never been easy. A mobile mechanic earns his crust. Well done for filming this.

[@jacklambo7346]

Nice job did you remove the subframe or just drop one side of it

[@WMCS]

ryan lambert Just dropped one side about 2 inches.

[@Bombastic_Spastic]

You can do these without removing the subframe?

[@peterhavens1108]

Does this car have ac? Is there enough flex in the hoses to move the rad assembly aside like you do with ac present on the car?

[@WMCS]

Yes that’s correct. There’s enough flex.

[@mikefandango2296]

You’re a machine!

[@larryleisuresuit9584]

WOW!!!!!!!!!!!! LOL I was wondering why this guy would sell me his 2002 Mini 5 speed looking like brand spanking new for 1500.00 ! LOL all it needs is a NEW clutch! LOL I don't know if this video just talked me into or out of getting it. LOL I mean, I am fully capable of this job, but I don't know if I want to do it now. LOL. Amazing Video man, seriously. I really like how there is ZERO BS in it. I can't hear worth a damn anyway and what a enormousness amount of information is here! This is probably one of the best vids I have seen for repair and replacement. I can't even think of another compares. I gotta go see if you have more of these now. looking like you do eh.

[@WMCS]

Larry Leisuresuit thanks for your review and visiting the channel. I’ve done an updated version of how to just replace the clutch rather than taking the gearbox out. It cuts the replacement time almost by 2 hours .... it’s not a bad job tho ...about 4 hours ....

[@larryleisuresuit9584]

@@WMCS I will check that out! Thanks man!

[@mrgrumpy5116]

thanks for the video Kevin, after watching that I can't think of one good reason why I might want to buy one.

[@WMCS]

😁😂😂✨..,, they are a bit like a high maintenance woman ..,, you have to fork out just to stand next to her ...

[@dusanbozic7773]

Hello! Is that Bmw, Peugeot or Chevrolet engine? ?

[@WMCS]

It’s Peugeot engine

[@herridge819]

Top work Kevin!

[@huntersbar]

Have you ever had the bolts holding the battery tray in place rotate freely without unscrewing? What was your solution if so? Thanks

[@WMCS]

Yes. Quite often. the only solution is to get a flat head screw driver and a hammer and make a clean cut around the bolt.

[@huntersbar]

Do you mean cutting the tray itself so it can clear the bolts? That was about to be my next attempt to solve it, but thought I'd ask before cutting.

[@WMCS]

Yes exactly that. And by leaving the bolt in when you fit the tray back that bolt will serve it’s purpose again.

[@garybriers690]

I would like to know where you get those gloves from can't find any decent ones anywhere

[@WMCS]

You can get it off eBay. www.ebay.co.uk/itm/Orange-Disposable-7mm-Nitrile-Gloves-90-per-box-Textured-Latex-Free-Size-XL-/114466604998?_trksid=p2349624.m46890.l49292

[@garybriers690]

@@WMCS thanks for that will save me changing them every 2 minutes

[@westawesta9063]

👏👏👏👏👏👏👏👏👏👏👏👏👏

[@minicar1172]

I have a Mini Cooper r50 and I had an EP emblem on the dashboard with a check engine light and RPM turns too high. It seems that the Mini Cooper was not turning from the first or second gear, what is the solution?

[@stevemilne750]

Very helpful video got a clutch to do soon on my wifes mini one clutch operates fine just has a noisy release bearing hoping it holds out till i get time to do it but your video will come in handy.

[@jimmer1976]

FairPlay to you 👍 I’d spend the entire duration it took you to do it looking for a socket that I had in my hand five minutes before…

[@neeeneee4372]

bmw brakes

[@Mario-zb1yc]

Respect

[@Metalmachinecrush]

Fair play to that man,.. doing it on someone's drive in the wind and rain, not an easy job at the best of times. A*****

[@geoffcooke9394]

Thats some miserable wind. would like to of heard a moan or a groan though . good up load.

[@EddieLeal]

That mini-cooper is a job and a half. Good God man! You pretty much disassembled the entire front end. 😳👍

[@WMCS]

😁🍻… that’s it .. it’s like digging for gold this one

[@donnymacleod9729]

Making it look easy superb well done

[@ronin99999]

Kevin you are my hero

[@WMCS]

😁🍻

[@benking9503]

I gotta do the wifes mini now, yaaaaaay! I think her throw out baring has exploded too, like your videos mate, I did a Peugeot 207 the other day after watching that video of yours, very helpful thanks!

[@WMCS]

ben king thanks for visiting the channel. I recently posted and updated much quicker way of clutch replacement on a mini. Let us know how you get on.

[@greenkrack1299]

what do u do next i mean u put a new trans in now what bout this program part or the adaptive part do u have to hook up ur lap top and do some wizard shit cuz that’s where i am my shit says xp so i gotta do all the d p n 3sec 10 times

[@WMCS]

Hey Green that is it. Nothing more to it. No programming of anything required ..,

[@stevenmintandrews4859]

Get it inside mate , Make things a lot easier, Also keeps your drive clean and out of view of noisy neighbours.

[@WMCS]

Thanks 🍻🍻

[@matthewharmer1656]

How much did it cost?

[@connorpoole]

What’s the book time on one of these?

[@WMCS]

About 7.5 hrs

[@droolingi605]

Can you do valve stem seals without removing the head? If so what would be the quote? My mini r56 n12 starts smoking after 20 min of driving, when accelerating in 1st gear.

[@WMCS]

B B Most engine variants you can do it. Make sure you have the correct pinch tools for the collets.