Williams Mobile Clutch Service. Week 10/07/23. Video Log.

[@WMCS]

www.williamsmobileclutch.co.uk 🇬🇧 Contact Us For Your Clutch Replacement Service. A big thank you to all our viewers and subscribers. Really appreciate you for tuning in. Kind Regards K-Albert Williams.

[@shaunleonard8146]

That work is NOT for the faint hearted!

[@northerner1374]

Omg Kev I was wanting to reach in the screen and help you with that motorhome box! I feel your pain and I’m sure others do in the rain aswell! Legend and an artist 🙏

[@WMCS]

Getting it out was also a struggle. No more 3.0L motor home in future. Too heavy.

[@izmiregal1]

​@@WMCSi think with a second jack it is possible. I have done this with heavy gearboxes.. By the way, are you sure this is a 3 liter engine? I think it is a 2,3 liter.

[@arvydasmacis4265]

I say same then do first ducato gearbox on driveway. After i do more then 50😅. Fue tips from my side. Then removing m40 gearbox from 2.3 ducato you dont need to remove right driveshaft because there enough space between gearbox and subframe. Then removing from 3jtd must remove right driveshaft. And i always suport engine with two jacks one like you do, under the oil pan other under air condition compresor. Lifting this jack i rotate engine clock wise ant make more room between gearbox and subframe. Then instaling gearbox first i put bell housing on clutch and leave diff in lowest position and then rotate gearbox anticlockwise. Sorry for my bad english.

[@april7_]

@@izmiregal1 No it is 3.0 (Red Power badge in front and side says Multijet 160) 2.3 is Multijet 130, later 150!

[@izmiregal1]

@@april7_ ok, thanks.

[@laverdas20]

iNCROYABLE ! Ducato gearbox without a lift ! Your new name is Kevin Hulk Williams !!!!!

[@pascalloyer7656]

Hi, this guy is incredible ! he deserve to be in guiness book ! really ! I have not word ! congratulations Mister

[@Faitter]

53:43 - I feel you bro :D On a serious note, I really do appreciate your line of work - doing mech work outside 24/7 - 365 is tough. Respect!

[@fraz172]

This is my mates motor home. He is very happy with the service you provided.

[@WMCS]

Thank you 😁🍻🍻🍻🍻

[@engineersautomotiveservice]

Wow that Ducato Motorhome. Even the workshop manual says you can only get the gearbox out together with the engine, and you did it without a transmission jack on the floor. Great job!

[@maxthecaddy8451]

that Fiat Ducato really was the mothership of a gearbox, Respect for taking that one on buddy 👍

[@WMCS]

Don’t think I’ll be doing another one again .. wouldn’t recommend it either 🍻🍻

[@stevesmith4596]

I bet you felt beat up the next day after tackling the motor home clutch change!! Total respect to you Kevin, you're a legend!!!

[@pabloetchepare7160]

wow !. you work with your body. arms, legs, under the sun, rain, wind. Under water. Just amazing skills. Truly awesome !. Impeccable work. Just amazing !. Cheers !. A truly example for a big croud that watches you. You are great !. Regards. Pablo. Watching you , Inspire to work as hard as you do.

[@leslaw4214]

This is a artist's at work a mechanic who knows his stuff Keep up the good work. Love the videos step by step Brilliant.

[@WMCS]

Thankyou. Really appreciate your feedback

[@bradragland2859]

Amazing. You make it look so easy. Front wheel drive vehicles, tight spaces, and all professional. Great work. Solid videos. Thank you. Greetings from Tennessee, USA.

[@bariss.3403]

Man I changed the clutch, throwaway bearing and the DMF for the exact engine 3,0L of a Citroen Jumper 3 days ago and I'm still shaking. Was extremely heavy and I didn't have a quality car jack like yours so could not lift the van high enough, which made everything even harder. I cannot describe how though of a job it was. Only thanks to your videos I could do it myself, but fuck me if I ever attempt such a thing again. Thank you very very very much for these videos. You're a hero.

[@WMCS]

Thankyou for taking time to leave a feedback. And your experience with one of them beats.

[@angelpc22]

Man... You are awesome... working in cold and rain...My father was truck /bus repairman, that was in garage...mostly not outside.

[@TB-jy5nr]

Hello Kevin respect 2 you, let god keep your muscle power. I also work at a Fiat garage and occasionally we do clutch replacment on a Fiat Ducato 2.3 / 3.0 JTD, the gearbox are heavy and always require 2 people to disassemble/assemble. 👏👏👏

[@m.t3345]

Great job!and all alone! ! admirable! respect!!

[@guytripp7242]

1:05:49 Thanks for saving @jaguar_stillz Fantastic job Kevin. Looking forward to more adventures in our banger rally Jag thanks to your excellent workmanship 👍🏻

[@mx7126]

Kevin, very hard work, at any time of the year! Sincerely from Russia! I'm shaking your strong hand!

[@galeus1000]

You deserve a medal for fitting the Ducato clutch, especially in the pouring rain, about the only good thing was it was summer, though it didn't look like it. 🙂

[@WMCS]

🍻😁

[@peterarries7879]

Kevin you claim the Internet video status after tackling the motor home 👏🏽👏🏽👏🏽 and in the pouring rain as well, definitely a well deserved pint after that one 👍🏻👍🏻

[@WMCS]

Under God’s sun I tell you I won’t be doing another one again 😁🍻🍻.. thanks for feedback, much appreciated

[@johnp6636]

That camper looked a struggle getting the box in and out hats off to you 👍👍

[@WMCS]

It was a very very heavy gearbox. This was a one off repair. Not to be repeated

[@johnp6636]

@@WMCS I don’t blame you at all 👍

[@stevesmith4596]

I reckon Kevin could bench press 250kg 😊!!

[@stevesmith4596]

I bet the relief you had Kevin, when the camper was back on its wheels!!

[@MotorhomeDIY]

Gained a sub love this work and you seem a professional I have a 3.0 motorhome 😂

[@mr.t2585]

Good work Kevin as always. For that motorhome very heavy gearbox. Looks like 50kg+ in tight space . Maybe another jack for installing gearbox back in?

[@cransaftvalve734]

Great job.

[@cupo6178]

Prvo palac gore pa onda gledam video,majstore svaka čast👍👍💪💪💪💪

[@danieltattersley]

The graft u put in is awsome! you and your videos are legend pal!.

[@HUBONEN]

Nice to see you are still rockn rolling mate! I think you have the world record in "most transmission lifts with stomach and hands".

[@karlmabe1649]

Amazing job love how you throw the tools around

[@WMCS]

That’s it. Always in motion 🍻

[@rusurextion]

Man 😵‍💫😵‍💫😵‍💫 that motorhome reminded me of the 06 ford escape. God bless and good job

[@WMCS]

Thank you .. 🍻🍻.. it was a bit like a train. All it needed was a track 🍻😁

[@josepinto9416]

Salut Kévin que dire de plus encore bravo car tu fait un sacrée travail encore merci pour ton partage

[@WMCS]

Merci

[@ApolloFreya]

You're getting really bad weather for outside work great videos I’ve watched a few takes me back to the days when I use to work on cars 😎

[@WMCS]

A bit of that holy water 💦.. apparently it’s from the man himself from upstairs ..

[@andrealai7203]

Greetings from Italy great job congratulations

[@johnevans7389]

Get yourself a strongback and chain to support the gearbox before you hurt yourself ,Great work as usuall.

[@jamesward5721]

With all the "Tough Guy" videos on YT Kev, I'm calling it and saying they can't hold a candle to you. I work bloomin hard - takes one to know one - but man, you're some grafter.

[@WMCS]

Thank you for the feedback. Very much appreciated

[@Jason-sz5zv]

Just discovered your channel. Brilliant. I work on cars all the time. Manual and Automatic. What amazes me about you is your level of organization. Methodical. And your knowledge base of so many different vehicles. I have the luxury of no rust on cars in North Carolina but you are working around rust everywhere and making it look easy. Great work my friend.

[@WMCS]

Thankyou. Really appreciate the feedback

[@scotspie501douglas7]

as 1374 has said amazing and no other guy would do those clutches in the rain and all look so so heavy well done you

[@WMCS]

The words of encouragement and support makes a big difference. Thank you

[@홍길동-n2d8w]

대단합니다 존경합니다 최고

[@JoeSmith-jp7bk]

I love to see a profit breakdown of a mobile mechanics job like this

[@montyzumazoom1337]

That motorhome unit was a challenge! Well done Kev.

[@WMCS]

Sure was a beast .. 🍻🍻

[@eddieMurphy11111]

sorry i missed last weeks not to well but I am catching up this week I see you have had a new windscreen yes /no thanks for the video

[@WMCS]

Hope you’re keeping well and strong. Really appreciate your input towards the channel. Greatly appreciated.

[@ashercohen4739]

First of all, well done, you remind me of me in my youth, everything is a desire to make a living, so call me the sidewalk garage, I see you, I am full of admiration for you, just take care of yourself.

[@WMCS]

This is no longer a Job for me. But rather a pleasure to get out of house. On the road. Countryside meeting new people. And doing what I love to the very best of my ability.

[@kerbsiderecycling2694]

Top quality work as always 👍👍👍

[@WMCS]

I beeped you coming out of BP garage this morning in Rayleigh 😁🍻🍻🍻

[@kerbsiderecycling2694]

@@WMCS was not in rayleigh this morning yezterday i was

[@aldivaraditya7535]

Good job mr. Dwayne Johnson aka The Rock ! 🎉 been following you since maybe 2 years.

[@aldivaraditya7535]

My first watched video of you is suzuki splash which is my car 🎉.

[@WMCS]

Thank you … the Rock ain’t got nothing on me 😁🍻🍻😆

[@bariss.3403]

Hey Kevin, at @49:05 would you please tell me why you put a sikaflex/sealant behind the central slave cylinder (release/throwaway bearing)?? I realize it's a hydraulic one. I watched almost all of your videos and noticed that you sometimes put just grease or simply nothing. You also sometimes prime it. Can you help me figure this out? The reason I'm asking is because I've also replaced the clutch, throwaway bearing and the DMF for the exact engine 3,0L of a Citroen Jumper 11 months and 10k km before, and now I ended up with a complete clutch failure. The clutch is not disengaging. Idk what went wrong with my install, so maybe the sealant was missing?

[@smoggy1964]

The mans in great shape and looks after himself, hence why he can do this style of work

[@WMCS]

Very true… treating body as a professional athlete would.

[@mrhaltstop2294]

It would be interesting to view the gear box oil filling and the clutch cylinders..

[@WMCS]

Subscribe and access full repair videos 🍻

[@gabrielcabrera5900]

Saludos desde Uruguay 🇺🇾 😊

[@briantrueman3505]

Top lad Kevin no one could ever say you don’t earn your money; great watch as always you don’t want too many motor home clutches in a week 🤣🤣🔧🔧👍👍

[@WMCS]

Not that one for sure. But having said that if another one comes up I’ll find it hard to turn down as for me personally it’s like losing a challenge 🍻😁

[@raulred40]

you're a machine💪

[@dannysmobilerepair1153]

Hi, ditto on the double jack stands. Chocking the wheels is something I'm not in the habit of doing, but I'll work on it. I got a question, on the first job, the flywheel looked scored or warped. Was it changed, or the customer did not want it to be replaced? What about the pilot bearing?

[@onlylexus]

You are damn good man...and you do a great job as I can see. I don't suppose you'd come up to Scotland to change the clutch in my 2005, 2.3 fiat ducato motorhome would you? i would trust you to do a good job.

[@WMCS]

It’ll have to be over a weekend and I’ll need to stay over night. www.williamsmobileclutch.co.uk

[@dertod59]

whaou , vous devez avoir de super bras car c' est très lourd ! faite vous les changement d' huiles de boite à chaque fois ?

[@Kyosti.P.Mahtisonni]

Great video! When working on the Ducato, what was the black stuff you applied on the new slave cylinder? What about the red stuff on the transmission main shaft?

[@WMCS]

That was high temp sealant .. Then red rubber grease.

[@cliffthompson2996]

I've got to SAY KEV You Do A Of driving to change a clutch GOOD ON You 👍👍👍👍

[@WMCS]

That’s it. Enjoying the scenery 🍻☀️

[@xoancabado]

i could feel the struggle in the ducato, looks heavy af jesus

[@WMCS]

You’re not wrong there. The tricky part is clearing the body and subframe to get it in

[@xoancabado]

@@WMCS I'll keep it in mind in case I have to work in one of those one day 😂😭

[@ferreiramiguel2910]

William cheers friend

[@WMCS]

Salutes 🍻🍻🍻☀️

[@kolibriEE8]

Repect, good job

[@bobgorman9481]

Working on the motor home was a bit like working in the flooded cellar of a partially suspended bungalow 😊

[@WMCS]

😂😁🍻.. hope it’s not bringing back memories…

[@sofienelhadi5949]

can you make a video to change the clutch audi A4 b8?

[@clipper651]

Kevin always best for organization and professionalism

[@brunoklein4632]

you're crazy Kevin, we took this Ducato derailleur and put it in two. adptar an alligator to facilitate.poor column. and to make it more difficult, rain. God bless you 🙏

[@WMCS]

This was one heck of a motor home. That 3.0L gearbox was something else 😁

[@RiccardoPearlman]

Hey Kevin- have you ever done one of the Jeep 4.0L in line 6 clutches?

[@WMCS]

I’ve never seen one before. Are they sequential gearbox ..?

[@RiccardoPearlman]

@@WMCS No they are usually just a 5 speed. In the US they are a really common engine with the cherokee's and wranglers. I only ask because I have one, and I see you usually working on transverse mount engines. I am really curious about how you approach in line engines. Are they easier or harder than the transverse mounts?

[@HUBONEN]

How you calculate those driving times for invoice?

[@WMCS]

I don’t charge travel time. That’s my personal journey .. the main thing for me is the happiness the journey and the work brings for me as an individual… I get paid in the process which is an added bonus which some of it goes to good causes ..

[@michelszvetecz3243]

wow même les camping car à une heure de route même pas peur alors, champion gars👍👍

[@WMCS]

Thank you for taking time to leave a feedback. 🍻🍻

[@andyg817]

Maybe a floor gearbox jack mod may help you on some jobs.. but then its probably easier for u without lol. , im in the trade 18 years..those cordless tools are a life saver.. . top effort,

[@WMCS]

They are indeed a game changer. I wouldn’t leave home without them

[@siongriffiths877]

Fantastic work as usual find your videos extremely helpful when doing clutch jobs 👏 have you done a mk1 ford kuga 2.0tdci?

[@WMCS]

There’s a complete repair video of one on the channel. 🍻

[@siongriffiths877]

Thank you i did have a look but couldn't find it

[@jeremybeck7244]

That gym membership came in handy on that one👍💪

[@WMCS]

Yep.. years

[@slavicshop2398]

Can I ask what kind of camera do you use? Looks very good .

[@WMCS]

It’s a GoPro.

[@mrhaltstop2294]

We used to work this way in the 70’s…without electric and pneumatic tools

[@-dazzy-]

Hi Kevin Have you ever changed a clutch on a fiat stilo and perhaps have a video on it?,,

[@WMCS]

Yes. There’s one on the channel.

[@-dazzy-]

@@WMCS Great,, Would you be Able to link the video?,, if not no problem, 👍🏻

[@angelopaulo1187]

[@barrygray8356]

Wish I was as skillful and strong as you mate. Keep up the good work. Great stuff 👍🏼

[@WMCS]

Thank you for the feedback

[@MsRaker]

hi is this the 6 GEAR COMFORT AUTOMATIC ?

[@WMCS]

It’s a manual

[@ЮрийТищенко-б4х]

Вы маховик на 2 болта толька закрутили на Ягуаре?

[@WMCS]

Subscribe and access full repair videos on the channel

[@cferguson-g4e]

Hi Kev. Excellent chanell. I know you are uber busy but, being cheeky would you answer a quick question? At witts end. Although this relates specifically to ourHyundai i40 2014 1.7cdti full dual mass clutch change Sachs/LUK - I am assuming it’s the same for many modern vehicles. Would have called you out if not 250 miles away. Initially release bearing leaking - gearbox all good, 20k clutch but slight rattle from DM so changed the lot. Issue - no gears after change except when engine off - yes 2 of us confirmed friction plate facing right way BEFORE it went in, full manual and vac bleed of release bearing, 400ml to clear all bubbles. Kudos to you for lifting that monster box on your own mate. Borescope into bellhousing showing release & cover plate moving but obviously not enough to change gear. Assuming the auto clutch adjuster on new cover plate did not magically adjust itself then why would it not disengage when pedal depressed - yes pedal is high and feels good but maybe not pushing far enough? Only poss reason I’ve come across is clutch pressure regulator failing when bled but no one can say why it would do that and this is the plastic one that cannot be bypassed. Any insight/suggestions? BTW - took you mins to get box in - took 2 of us 3 bloomin hours just trying to clear that crossmember to get box back in! even more kudos to you mate.

[@WMCS]

Have you got the part number from the box. There’s two options on clutch kit. Difference being in pressure plate. Was the DMF Replaced also ..? I don’t get answer coming through on here. So email admin and she’ll forward email to me so I can try and help.

[@cferguson-g4e]

@@WMCS Thanks for reply. Yes DMF & 3-piece kit replaced. DMF Sachs 2294 701 066 (099) Clutch kit LUK 624 3561 33 (3 piece)

[@corei51]

Deep respect white the camper 💪💪👍

[@WMCS]

Oufff… that was as a mother load.. a one off

[@petersmith4455]

hi there, great video,ref to that mobile home,bodies are so heavy, the g/box is not designed for it,should be lower rartio g/box,no wonder clutches burn out on these motors

[@WMCS]

I completely see what you mean. The sheer weight of that unit should at least be a 4L engine with lower gear ratio

[@rogersvensson8135]

Aquarium?

[@WMCS]

Pond

[@cyprianzimu3954]

I am from South Africa n how I wish I could ship my car to u for a clutch replacement n ship it back knowing it was done by a pro. Respect my brother. U don't say much don't u,?

[@WMCS]

Thankyou for taking time to leave a generous feedback.. really means a lot ..

[@davidwilliams706]

Regarding the Ducato motorhome. Do you get sent a photo of the vehicle before you accept a job so you know what you're dealing with, or do you just go for it? You're obviously a strong guy, but I think we all winced when you boosted that box back in place.

[@WMCS]

I usually find out on the day. But this one was slightly unexpected

[@leopoldosolasimon]

La lluvia no es agradable cuando trabajas en la calle 😟

[@rashidnaga]

sir long day how many car you replace clutch plate😊 .

[@WMCS]

Do date I’ve replaced 3245 clutches .. I keep a log of them all.

[@maverick507]

Hi buddy Soon the holidays ?? 💅💆‍♂️

[@WMCS]

That’s it. Another week then ✈️ ☀️ 🍹 🏖️

[@blacksky9621]

Sorry but the NOS sticker on the jaguar killed me

[@WMCS]

.

[@khalegr2547]

Bien ,merveilleux

[@WMCS]

Merci

[@cirkin2876]

👍🏼👍🏼

[@Claud1995]

where did you learn to work on cars?

[@WMCS]

4 years City&Guilds then a further 3 years Land Rover academy ..

[@Claud1995]

@@WMCS must have started at a young age huh

[@MotorhomeDIY]

How long did the ducato clutch take you to do mate

[@WMCS]

From arriving on set to leaving 6hrs. But once up on stands to completion still in stands about 4.5hrs ..

[@MotorhomeDIY]

@@WMCS brilliant work

[@MotorhomeDIY]

@@WMCS have you ever been and changed the clutch on the m40 box mate on the fiat ducato 3.0 or relay or boxer which are the same engine and gear box apparently using the comfortmatic which doesn’t come under automatic does it but actually manual but robot

[@MotorhomeDIY]

@@WMCS out of curiosity bro what’s this cost on this engine to replace the clutch Thanks

[@pokyannick10]

what a hard week!

[@WMCS]

Absolutely correct ✅

[@bmwm5bmw610]

Plenty of protein milkshakes and 🍖 🥓 🥩 is well to have energy for all this jobs every day nearly 😊 and gym 🏋️‍♂️ 💪

[@WMCS]

Definitely.. gotta work like a pro athlete 😁☀️

[@NeoAndersonReloaded]

Dang. This is alot!

[@AJ-zv9tn]

did you ever have someone steal your tools whilst workin

[@WMCS]

That’s unheard of. Most people and kids by their own tools.

[@AJ-zv9tn]

@@WMCS damn you from the suburbs aren't you

[@Olivier54000]

xD @53:41 me too, the women who pass distract me.

[@WMCS]

😁😆.. very easily distracted by these early morning birds.

[@rene5257]

embrayage camping car il auront un bon pour les vacances par contre je voie la boite lourde a remettre a du courage de mettre sa tout seul moi arriverai pas !!

[@WMCS]

A big Job but all that ends well 🍻🍻

[@izmiregal1]

Hollywood is calling, they need a new superhero. Captain Clutch, tadaaa.....

[@WMCS]

Not sure about Hollywood .. 😁.. Definitely keeping the locals happy tho 🍻🍻

[@mrhaltstop2294]

Operator must be young..it’s very physical

[@WMCS]

Mmmm… young in mindset

[@joliver865]

Your one big hench mother fu**er lifting that camper box in and out. Respect mate our job isn’t easy at all

[@WMCS]

🍻🍻🍻

[@gpredragbib4691]

Great and hard work. Rain, go to hell and leave Kevin to work without you! Kevin, please leave some music in your service car just for you. Best wishes...

[@WMCS]

Thanks for the supportive feedback .. really appreciate it. Regards.

[@blacksky9621]

Nani pani kevin chai papi mami :D

[@WMCS]

😁🍽️🍻

[@dertod59]

une tante pour vous protéger de la pluie serait judicieux ?