I made this planer in my workshop with mahogany sapelly wood. The irons were made by a blacksmith, my friend, from carbon steel Store: www.etsy.com/listing/80018525... Patreon: / fromthewood 木工 日本のカンナ 日本のかんな / fromthewoodpq
Пікірлер: 145
@moelan04124 жыл бұрын
Nice looking plane ! If I may share some informations . A Japanese plane iron is wedge shaped(tapers in thickness), which is what holds the blade in place(wedged in the groove), and also has a scooped back(Urasuki) to make flattening the back easier. As for the body, the sole is not flat the entire length , but it's scooped out so that there're really only two or three sections touching the wood when planing, to reduce friction and make the feel of the cut dramatically lighter .
@crgaillee14 күн бұрын
Thank you, those small details make a difference in the performance of the tool.
@stewartmcmanus39914 жыл бұрын
A thing of beauty, simple, elegant and practical. Thank you.
@JoshuaMichail05 жыл бұрын
That is a beautiful plane. Now I want to make my own, too.
@keirfarnum68114 жыл бұрын
Turned out very well! Nice work. Thanks for sharing.
@meanders92215 жыл бұрын
A very nice bit of work there, beautiful and functional.
@uldymuldy5 жыл бұрын
Very beautiful. Nice video! Thanks!
@humblehombre99045 жыл бұрын
Beautiful work. I am going to try it too. Very nice plane.
@BDM_PT5 жыл бұрын
Hi there from Portugal(Coimbra), Very nice Plane :D Obrigado(Thanks)
@FromTheWood5 жыл бұрын
Obrigado
@rafecamp4 жыл бұрын
awesome work!
@marcosdavanco79835 жыл бұрын
Obrigado por mais um belo trabalho, bem feito, simples e prático. Estava com saudades desses belos trabalhos. Parabens. São Paulo, Brasil. Abraços patrício.
@FromTheWood5 жыл бұрын
Obrigado. Grande abraço
@dirdick43 Жыл бұрын
Nicely made hand plane. I'm encouraged to try making one for myself thanks to this video
@FromTheWood Жыл бұрын
Thank you. Good luck for you.
@twsdlbh4 жыл бұрын
You make it look so easy. I'd buy one from you because then I won't have to fix the lazy factory work of a store bought one.
@khemstudios75815 жыл бұрын
Great job
@ribamarbianchini76454 жыл бұрын
Trabalho perfeito, parabéns!
@timwhite92555 жыл бұрын
Elegant, great job.
@FromTheWood5 жыл бұрын
Thank you
@drjekyll405 жыл бұрын
A very well done and beautiful work. Greetings from Chile.
@FromTheWood5 жыл бұрын
Gracias
@tomoyama49654 жыл бұрын
アマチュアしかも外国人が作ろうという意欲は凄い。 改善すべき点はあるが、努力は評価する。
@michaelroof19694 жыл бұрын
good job!
@vicenteborges5265 жыл бұрын
este e o mito da madeira sou fan dele d+ vai ser bom e o unico parabens
@imranbagwan54233 жыл бұрын
very nice marvelous job
@1misticointolerante5 жыл бұрын
Hermoso proyecto...me recordó la forma de construcción de un krenov.....a la japonesa.....gracias.!!!!!
@gwjwnbasu86055 жыл бұрын
what a great talent thanks for sharing.....have a good day
@FromTheWood5 жыл бұрын
Thank you
@marcenariacriativa_messi3 жыл бұрын
Bela plaina. Parabéns
@cesargamez73845 жыл бұрын
Gracias por enseñarnos a aprender y regalarnos su tiempo felicidades de Aguascalientes México Francisco Gámez 👍👍👍👍👍👍👍👍👍👍 y seguimos viendo sus vídeos
@FromTheWood5 жыл бұрын
Gracias por tus palabras
@HibikiKano Жыл бұрын
Thank you. I am going to try and make one of these next 😁.
@FromTheWood Жыл бұрын
good luck. Thanks
@crossgrainwoodproductsltd92305 жыл бұрын
WOW!! That came out beautiful and sharp too. Great video, thank you!
@budirahman77065 жыл бұрын
Thank you sir....
@chasimjamil43792 жыл бұрын
Great 👍 Wonderful Excellent work good job sir.
@FromTheWood2 жыл бұрын
Thank you
@Karpe_Deem Жыл бұрын
*GLUES THEM UP TOGETHER* HA, GENIUS!
@sofianebenhadj605 жыл бұрын
very very very good of job
@rubeniopereira81494 жыл бұрын
Exelente trabalho amigo parabéns
@FromTheWood4 жыл бұрын
Obrigado
@ASousaMakesIt5 жыл бұрын
Muito bom, quem sabe sabe!
@xl0005 жыл бұрын
The way you works looks very safe.
@YonnyDiaz5 жыл бұрын
Excelente..!!!!
@FromTheWood5 жыл бұрын
Obrigado
@woodbe53115 жыл бұрын
Boas, gosto de o ver a trabalhar nas novas instalações :) com respeito a essa plaina, ficou bem bonita. Já construí umas 4 e com sucesso. só notei da sua parte quando estava a raspar a base para fazer os côncavos este precedimento deve ser feito com os ferro metido mas recolhido como se fosse defenitivo. A razão pela qual digo isto faz toda a diferença pois a tenção causada pelos ferros já causa uma curvatura na base da plaina. Acredite que faz toda a diferença, não deixando assim a plaina dançar tanto quando corre sobre a madeira. Excelente trabalho.
@FromTheWood5 жыл бұрын
Não tinha pensado nisso, mas de facto com o ferro em pressão é evidente que deve haver alguma deformação. Vou verificar com a régua. Obrigado pela dica.
@user-hq2rz6qx8e4 жыл бұрын
And I think to myself... what a wonderful plane...
@FromTheWood4 жыл бұрын
I see it bloom for me and you. Thank you
@MG-vo7is4 ай бұрын
Nice.
@markcoleman29984 жыл бұрын
Nice👍
@jakrr1004 жыл бұрын
Great job! Where can you get the blade sets?
@SteifWood5 жыл бұрын
Sterling job. Any numbers on dimensions and angels? Would be much appreciated as I'm about to make my first plane soon and is considering the options btw a Japanese vs a Western(-ish) model.
@rain1043 жыл бұрын
Mine has a 45-degree bed angle.
@huuo13365 жыл бұрын
more then awesome
@FromTheWood5 жыл бұрын
Thank you
@VORONM5 жыл бұрын
Good job and nice plane!
@user-kk7vi1ub6v5 жыл бұрын
日本のかんなの刃は、平面ではありません。 裏打ち、裏出し、があります。
@vinkoanusic56855 жыл бұрын
Cestitke za rad interesuje. Me pod kojim je kutom spiljeno drvo gdj ide noz pozdrav
@user-cm3mg4rh6s5 жыл бұрын
素晴らしい 鉋はこのように手間暇かけて造り出しているんですね。
@Jaycee374 жыл бұрын
I didn't see your Kanna in the etsy store. I would love one that size. Please consider adding one.
@FromTheWood4 жыл бұрын
Ok. Thank you
@jadekayak015 жыл бұрын
I watched a guy in the jungle(on yt) make one of these with nothing but a nail,malket,chisel,and a large knife. His worked fine so i dont know who's is best.
@syota454 жыл бұрын
It’s a great work but far from Japanese Kanna. I’m a Japanese carpenter in Kyoto, Japan .
@MrHE22074 жыл бұрын
very good work ! what is that for wood?
@Kingeroy5 жыл бұрын
Nice tool, congratulations and thank you for this video. Why do you scrape underneath, is it to minimize friction? Thanks.
@FromTheWood5 жыл бұрын
Yes. The Kanna planers are like this.
@WoodfulProjects3 жыл бұрын
may i ask you where did you get those kanna blades? thanks
@ecoalteajuancarlos15445 жыл бұрын
Muy bueno, genial, pero porque le pasa la cuchilla después de haberlo lijado ? no tiene que estar al superficie de abajo totalmente plana ? Un saludo.
@FromTheWood5 жыл бұрын
Nas plainas japonesas (kanna) a superfície inferior não é plana. A plaina só toca na madeira em dois ou três pontos. Obrigado
@elvinmiddleton21384 жыл бұрын
Gorgeous I would like to know the wood density
@andyost49065 жыл бұрын
Top Top Top 👌👌👌👍👍👍
@aserta5 жыл бұрын
Bellissimo.
@FromTheWood5 жыл бұрын
Obrigado
@ginoasci28765 жыл бұрын
Polish and shine the blade and chip breaker to a mirror finish. What angle is the blade set at?
@MPCreazioniLegno5 жыл бұрын
Probably 30 or 25 considering Japan style
@frabcescodantonio60545 жыл бұрын
Minchia che sei bravo!
@martinponcedeleon56605 жыл бұрын
Excellent job if you’re selling that planers how much does is cost. Thanks for your video!
@FromTheWood5 жыл бұрын
Thank you. I'm not selling this planer. But I will sell the blades soon. On etsy.
@kimmy_future42654 жыл бұрын
Beautiful plane! what is the purpose of having a concave sole?
@FromTheWood4 жыл бұрын
To reduce friction
@keirfarnum68114 жыл бұрын
kim-o-fuz All Japanese planes are built like that. They do the same with their chisels too.
@LimitedGunnerGM Жыл бұрын
A Krenov Kanna? Curious if a laminated “traditional style” Kanna can be done?
@Apucik5 жыл бұрын
A very nice bit of work. What is the size (height, thickness and width) of a cutting blade and subblade that your friend forged? Thank you!
@FromTheWood5 жыл бұрын
10 cm * 4.8 cm * 0.7 cm. Thank you
@Apucik5 жыл бұрын
Size (height, thickness and width) of a subblade? Thank you!
@FromTheWood5 жыл бұрын
@@Apucik I can not answer that now. I do not have the plan with me
@dunguyen75715 жыл бұрын
Thanks Save me ton of money
@user-js9er8bx1b9 күн бұрын
Why were you using the card scraper on the bottom of the plane fro about 1/2 on both ends.
@gerardnourigat36635 жыл бұрын
Where to buy the iron ? Very nice kana and fully efficient.
@FromTheWood5 жыл бұрын
In a few days I will put the link to access the purchase. Thank you.
@silvermediastudio5 жыл бұрын
You can make your own rather easily. Buy O1 tool steel bar, grind the bevel, and harden it using a torch forge and quench in motor oil.
@washitokusei6801 Жыл бұрын
How's the multi-piece construct holding together after removing the blade several times?
@DanielJoyce11 ай бұрын
Wood glue is stronger than wood so probably working just fine
@andrewbodine56632 жыл бұрын
What was the card scraping for?
@cbarksda61395 жыл бұрын
What are dimensions of original block of wood? What ought I to use in "search " on etsy page?
@FromTheWood5 жыл бұрын
the dimensions are: 28cm * 6cm * 4cm I do not have anything related to planer for sale on etsy. I intend to put on sale in a few days the blade of the planer
@JT-915 жыл бұрын
Looks great but i'll stick to something with a tote and knob. gripping a Kanna really hurts the hands after awhile
@FromTheWood5 жыл бұрын
it is true
@hans11635 жыл бұрын
👍
@claem17554 жыл бұрын
excelente trabajo, que angulo le diste a la cuchilla ???
@FromTheWood4 жыл бұрын
Obrigado. 45º
@changvita61525 жыл бұрын
👍👍👍
@WAYt_WANTed5 жыл бұрын
woah
@jorgeferreira93725 жыл бұрын
Japanese??🤔🤔🤔🤔interesting!!🤔🤔
@francislematt70794 жыл бұрын
Many Japanese speakers commenting that it's not proper - most complain that yours is made of glued three-piece wood and not out of a single piece. The second common point being the blade of yours is a flat piece of solid metal. The Japanese blade is laminated and very slightly concave on the back.
@FromTheWood4 жыл бұрын
Yeah, I know that. Even if it was made according to all Japanese methods, it would still not be a Japanese planer. It would always be a Portuguese planer !! I dont care. It works and the blade is optimal. It was a friend of mine, a blacksmith, who made them.
@Englishman9992 жыл бұрын
@@FromTheWood Then if you know all this, why call it a Kanna?? It's clearly not, it's a plane made (loosely) in the style of a Kanna. You even call it a Japanese plane in the title. It's a poor imitation, nothing more...
@grimaldogoncalvesferreira31454 жыл бұрын
Como fazer para eu comprar uma plaina dessas? Obrigado!
@FromTheWood4 жыл бұрын
Eu não vendo a plaina. Mas tenho ferros para vender.
@grimaldogoncalvesferreira31454 жыл бұрын
@@FromTheWood Como faço pra adquirir, bem como preço! Obrigado!
@lemanxr4 ай бұрын
Hi what kinde of angels it need to have
@jagathrathnakumara6226 Жыл бұрын
do you sell this please
@MPCreazioniLegno5 жыл бұрын
Hi, really nice job. Just a couple of consideration. In my opinion, the mouth on the sole is a little bit too large, so it doesn't work too smooth on the wood... 2nd, the chip breaker is too thick... But as already said, these are only my opinions. Very good job
@keirfarnum68114 жыл бұрын
MP Creazioni Legno That’s a pretty typical thickness for a chip breaker on a Japanese plane.
@MPCreazioniLegno4 жыл бұрын
Thanks 😉
@billallmon40945 жыл бұрын
Your gona have a bad kickback if you dont get that miter guage out of yhe way
@dicedragon12005 жыл бұрын
Fingers too
@uncajim44333 жыл бұрын
And the first thing we see? Loose shirt sleeves flapping around.
It is very sad to see this type of videos that damage the reputation of Japanese carpentry because that you made has nothing to do with a true kanna (Japanese plane) Es muy triste ver este tipo de videos que perjudican la reputación de la carpintería japonesa porque lo que hiciste no tiene nada que ver con un kanna (cepillo japonés)
@FromTheWood5 жыл бұрын
Estaria muito mal a carpintaria japonesa se ficasse com a sua reputação prejudicada pelo facto de eu ter feito uma plaina seguindo o modelo de uma plaina japonesa, isto sem falar que eu tenho todo o direito de fazer aquilo que muito bem entendo, desde que não haja direitos de autor reservados, sem ter de dar satisfações a ninguém.
@keirfarnum68114 жыл бұрын
Carpintería de Japón Shokunin. Sashimono. Kumiko. It does nothing to the reputation of Japanese kanna for people to show their western interpretations of the design. It’s obvious to everyone that it’s not a fully traditional kanna.