Go Kart Live Axle Kit: Homemade Go Kart Axle

  Рет қаралды 423,059

KartFab

KartFab

Күн бұрын

Пікірлер: 244
@maximum3762
@maximum3762 3 жыл бұрын
2:33 “beat it with a hammer until it’s straight”. Great parenting advise!
@semhouben6300
@semhouben6300 3 жыл бұрын
Best comment😂
@MrMisanthrope1RBjr
@MrMisanthrope1RBjr 21 күн бұрын
thats what she said
@steelernation9320
@steelernation9320 5 жыл бұрын
How is that a live axle
@bigdogbigben
@bigdogbigben 4 жыл бұрын
I think the title is wrong. He talks about the live axle briefly, but showed how to make the one wheel drive dead axle.. Maybe he planned on showing how to make both.
@steelernation9320
@steelernation9320 4 жыл бұрын
bigdogbigben I’ve waited almost a year for a response
@diywithreza
@diywithreza 4 жыл бұрын
@@steelernation9320 OMG I love u
@steelernation9320
@steelernation9320 4 жыл бұрын
DIY With Reza hahaha
@jackhearn0633
@jackhearn0633 4 жыл бұрын
Lol😭🤣🤣
@zac2k801
@zac2k801 7 жыл бұрын
just wanted to say great video, been looking to make my own axle for a while now, your video explained it in seconds. thank you
@KartFab
@KartFab 7 жыл бұрын
no prob
@GoPowerSports
@GoPowerSports 9 жыл бұрын
Another great video.
@tonyrollin402
@tonyrollin402 3 жыл бұрын
Hi just what I'm looking for I have a smoker that I need to build a cart for because I very heavy and I'm living it to a concrete only I need something with bigger wheels so I would like to make a wagon style cart to set my smoker on so I can pull it around the yard can you help me out with the axles
@exoscrewdriver4213
@exoscrewdriver4213 6 жыл бұрын
Would be able to add a 6 inch bolt other side can put second sprocket and brake to add a second motor more power would it fit on this frame?
@KartFab
@KartFab 6 жыл бұрын
Yes but it would be hard to steer and requires jackshaft.
@ao2260
@ao2260 3 жыл бұрын
Can you do a video on the axle bearings
@zoltanx9374
@zoltanx9374 7 жыл бұрын
cool vid , im trying to upgrade to live axle on yard cart from dead axle
@pacgrafica4
@pacgrafica4 8 жыл бұрын
Hello, nice videos. What clutch is the best to off road and climb some hill´s. The torque converter or reduction wet clutch. thanks
@KartFab
@KartFab 8 жыл бұрын
+Paulo Cardoso torque converter is best for off road.
@prashant7738
@prashant7738 7 жыл бұрын
I have a leaner shaft and a go kart tyre.how should I assemble /pair them?I mean ,should the shaft be changed or can I do something else? please help
@texemplarstudios5481
@texemplarstudios5481 5 жыл бұрын
Is it not bad to weld a bolt? They have coatings on them that vaporize when you weld and I'm not sure grinding it really removes it all.
@KartFab
@KartFab 5 жыл бұрын
No it’s not bad. The coating is zinc and even if you didn’t remove it there isn’t enough of it there to have a measurable response to the exposure. You don’t get metal fume fever from welding two bolts.
@texemplarstudios5481
@texemplarstudios5481 5 жыл бұрын
@@KartFab Ah, ok! Thanks for the help - I subscribed BTW! I'm new to the go-kart scene, and I'm not one to use other people's plans and call it my creation, but these videos really help me with my design as all go-karts have similar components. Another question - I'm planning on using an 1800w motor for mine, and it has a T8F sprocket. For the drive sprocket, how hard would it be to attach this: tncscooters.com/index.php?route=product/product&product_id=135 to this wheel: www.harborfreight.com/10-in-pneumatic-tire-with-white-hub-62409.html
@KartFab
@KartFab 5 жыл бұрын
@@texemplarstudios5481 please, for the love of god, do not use MOVING DOLLY wheels for a go kart.
@texemplarstudios5481
@texemplarstudios5481 5 жыл бұрын
@@KartFab I've seen a lot of people use them, or at least similar wheels... do you have any recommendations for wheels that would fit onto a 5/8" bolt?
@KartFab
@KartFab 5 жыл бұрын
@@texemplarstudios5481 go kart wheels of course.
@seanmauck6604
@seanmauck6604 8 жыл бұрын
I have purchased the live axle plans and am working on the deluxe-upgrade version. However in the plans it is not clear how it is assembled, what is welded and where, and where it is even attached to the frame. This video said it would cover the live axle but it did not. Do you have a video that covers this or anything that would go into more depth on how this is assembled?
@KartFab
@KartFab 8 жыл бұрын
+Sean Mauck Sean. Feel free to message me on here or Facebook with questions. I am still making video of the deluxe build. The front end is the same as the free plans. Rear of kart for live axle is completely different. Plans do explain it well as many people have messaged me with their completed builds. You can check out my Facebook page that has pictures of the completed builds of the deluxe live axle plans as well facebook.com/KartFab
@aux1z11
@aux1z11 7 жыл бұрын
Thanks for the vids, what would be a estiment of profit selling one of these after build with HF motor ?
@KartFab
@KartFab 7 жыл бұрын
no idea
@adamcecere3369
@adamcecere3369 4 жыл бұрын
Dose a live axle allows the wheels to turn independently while the go kart is turning?
@KartFab
@KartFab 4 жыл бұрын
no, a live axle is the exact opposite. What you are wanting is a differential.
@adamcecere3369
@adamcecere3369 4 жыл бұрын
@@KartFab thank you
@aleckey3076
@aleckey3076 8 жыл бұрын
ok so I just got a live axle go kart but I have no tires except for the ones off of my other go kart which is dead axle. I was wondering if the wheels would still function. basically my question is could you take the wheels off of a dead axle and put them on a live axle?
@KartFab
@KartFab 8 жыл бұрын
+Alec Key did the live axle go kart come with rims on the rear axle?
@aleckey3076
@aleckey3076 8 жыл бұрын
+KartFab yes but they aren't the same size as the tires I need to put on the go kart
@KartFab
@KartFab 8 жыл бұрын
+Alec Key you need to put tires that fit the rims on the kart.
@AventureiroPaulek
@AventureiroPaulek 7 жыл бұрын
Our partner will get an incredible project after it's ready ... Taking advantage of writing there together we are stronger ... Big hug partner!
@TheGamingGeek2001
@TheGamingGeek2001 8 жыл бұрын
After buying the plans, about how much money would the parts for it cost?
@KartFab
@KartFab 8 жыл бұрын
+Steveg101 it's on the plans page FAQ
@TheGamingGeek2001
@TheGamingGeek2001 8 жыл бұрын
Ok, thank you :D
@tandmbros5877
@tandmbros5877 6 жыл бұрын
I had a question i have a classic go kart you can see it on my channel but i dont know where to buy a new drive wheel hub its a 1 wheel peel and the hub is destroyed
@fatbuddycat
@fatbuddycat 4 жыл бұрын
I'd be going mental doing all that work and then not doing a live axle! One wheel peels are definitely simple and have a place in the Karting world but once you drive a live axle kart its all over. Its more money but makes more sense. Then again, so does centering the motor over the rear end 🤔.
@saltiboni6415
@saltiboni6415 4 жыл бұрын
Where can i find a tire and hub set up like you show in the video for a dead axle?
@KartFab
@KartFab 4 жыл бұрын
links in description
@anunentitledmotivatedmille7731
@anunentitledmotivatedmille7731 3 жыл бұрын
What software did you use to make the 3d model?
@AustinGeary
@AustinGeary 7 жыл бұрын
hi, I have a question. I have a dead axle go kart. right now I'm looking to replace the drive wheel but am stuck. my cart uses 3/4 bore sprocket. I can't find a wheel online with a sprocket attached with a 3/4 bore. this may be noob question... but is there a way to attach a sprocket to a rim. my current wheel being replaced has the sprocket welded. so I can't replace the sprocket that's attached to it. so I have to get another rim that will fit the 3/4 axle and have a sprocket.
@KartFab
@KartFab 7 жыл бұрын
+Austin Geary yeah, there are 1 3/8" OD bearings that have a 3/4" ID sprocket is attached to drive wheel via flange/bolts, usually with a brake drum too.
@iammaobaoxian9308
@iammaobaoxian9308 6 жыл бұрын
Thanks for this video mate ! I am planning to do the same except that I am using 10mm bolt cause my bearings are smaller. Do you think it is strong enough?
@KartFab
@KartFab 6 жыл бұрын
Try it and find out.😀
@mlireton9739
@mlireton9739 3 жыл бұрын
What type of metal (stainless, zinc plated, galvanized, grade 8 steel, etc) is used for the bolts that make the axle? If it's being welded to plain steel, does it also have to be just plain steel?
@KartFab
@KartFab 3 жыл бұрын
Bolts can be grade 5 or grade 8
@chriswf
@chriswf 2 жыл бұрын
Anyone else have trouble finding dead axle kits? I want dead axle, but with 2 motors (independent of each other). I seriously can not find a dead axle kit. I'm not seeing one linked in this video either... Also what size bolts (other than 4 and 6 inches) did you use for your custom axle? Like what's the thickness? Head size? And metal type? :D Edit: Nvm I went to your kartfab site and saw you're using 5/8s inch (and 1" square tubing). Thanks!
@adrianalvarado8632
@adrianalvarado8632 8 жыл бұрын
can you use a galvanized bolt to use as an axle?
@parrm9580
@parrm9580 6 жыл бұрын
yes but very harmful to weld
@dirtandpaint260
@dirtandpaint260 8 жыл бұрын
if i have a 500CC Snowmobile motor im gonna use will i still need a torque converter
@KartFab
@KartFab 8 жыл бұрын
snowmobiles usually have their own style of torque converters. Typically, you would see a comet 94C or 'duster' drive unit with a similiarly named driven unit. These were meant for the high rpms of a 2 stroke engine.
@SkyWolfGaming12
@SkyWolfGaming12 6 жыл бұрын
Does the dead axle option cause one side to slightly steering in one direction or is it negligible?
@KartFab
@KartFab 6 жыл бұрын
negligible.
@mattloomis1685
@mattloomis1685 8 жыл бұрын
I can't weld but I need an axle like this but I'm putting an engine on a skateboard and will only need one wheel, the other problem is even if I could weld the base of it all is made of wood, basically, how do I attach a very short dead axle to a wooden board
@KartFab
@KartFab 8 жыл бұрын
yeah, you will need to weld some gussets to a plate and bolt the plate through the wood.
@_crg_
@_crg_ 8 жыл бұрын
"free go kart plans" I have go say the video is very helpful though
@halflingaesthetic
@halflingaesthetic 3 жыл бұрын
i know ur comment is 4 yrs old but the plans themselves are free, not the go kart
@erichernandez3954
@erichernandez3954 4 жыл бұрын
How do you know what size axle to get? I see some kits have different lengths of axles ?
@KartFab
@KartFab 4 жыл бұрын
Between 36 and 44” is about where I have seen them. 36 for narrow 1 seat go karts and 44” for two seaters.
@erichernandez3954
@erichernandez3954 4 жыл бұрын
@@KartFab ok thanks I'm using a frame from a manco dominator pretty big so I guess I'm going with the 44in
@thedozer1969
@thedozer1969 4 жыл бұрын
can you make it a 2 wheel drive or not
@fastcobra8
@fastcobra8 9 жыл бұрын
do u have any blue prints for a dingo style go cart at all?
@KartFab
@KartFab 9 жыл бұрын
Unfortunately, no. Have you tried looking on Craigslist and eBay for a used one? That's probably your best bet.
@fastcobra8
@fastcobra8 9 жыл бұрын
+KartFab yeah I have an they r still really expensive and hard to find.
@KartFab
@KartFab 9 жыл бұрын
Just have to be patient. I was able to buy a dingo for $100, $250, $80, and $80 (keep in mind that this is searching frequently for go kart and they were in bad bad shape, had to spend a lot of $ and effort to get them running and driving)
@fastcobra8
@fastcobra8 9 жыл бұрын
+KartFab gotcha where did u find them for that low of price and where do u find most of ur toys at?
@KartFab
@KartFab 9 жыл бұрын
Craigslist
@bloodxpubg9440
@bloodxpubg9440 7 жыл бұрын
what will be better engine or ganrator
@mohammadalawneh8100
@mohammadalawneh8100 8 жыл бұрын
what the programmes name your use to desgin it ??
@KartFab
@KartFab 8 жыл бұрын
cad
@mohammadalawneh8100
@mohammadalawneh8100 8 жыл бұрын
thank you
@Gokywildcats11
@Gokywildcats11 3 жыл бұрын
I want to do this similar for home made trailer for yard sprayer
@perersmithson6625
@perersmithson6625 8 жыл бұрын
how do I jump start a live axle kart I buyer a kart 2 days a go and it won't start on ground coz when I pull the pull start both the wheels move on floor and carnt pull it proper and when I lift bk end up and start it when I put it on floor it cuts out strate away any idea
@KartFab
@KartFab 8 жыл бұрын
no idea, its called "bump starting" and you can see on wiki how.
@ps-py7er
@ps-py7er 4 жыл бұрын
Will the kart be able to go over a hill on the road?
@KartFab
@KartFab 4 жыл бұрын
Yes depends on how steep
@EvanatSignExpo
@EvanatSignExpo 4 жыл бұрын
@@KartFab Do you sell live axle frames and kits for sale and ready to assemble?
@nickforrest6119
@nickforrest6119 7 жыл бұрын
What engine did you use and how fast does your kart go
@KartFab
@KartFab 7 жыл бұрын
+Nick Forrest predator 212cc and 25-30 mph
@efurniturewala53
@efurniturewala53 9 жыл бұрын
Are pillow blocks or axel hangers more strong
@KartFab
@KartFab 9 жыл бұрын
Axle hangars are because pillow blocks are usually bolted through tubing, compromising its integrity.
@kaedenbowman6727
@kaedenbowman6727 6 жыл бұрын
How much did you spend in all on the go kart
@gustavbork4664
@gustavbork4664 8 жыл бұрын
where did u get the bolt from. can't find them eny where. is the axle u use there 1 inch??
@KartFab
@KartFab 8 жыл бұрын
Its in the plans in the description. I got it from a hardware store (tractor supply). Any place that sells hardware should sell bolts like this (in the US at least).
@brainsballsengineering9136
@brainsballsengineering9136 8 жыл бұрын
Won't there be a steering differential with a one wheel drive?
@KartFab
@KartFab 8 жыл бұрын
A tiny bit of torque steer, but you are dealing with a little go kart engine here, not a car engine so its barely noticeable.
@grizoh
@grizoh 5 жыл бұрын
Curious why you dont just tack it with your welding squares in place
@KartFab
@KartFab 5 жыл бұрын
The welding squares are magnetic and it actually messes with the arc when you weld. You often times get really weird things happening when you expose the welding arc to a magnetic field.
@fayazghiasey3684
@fayazghiasey3684 8 жыл бұрын
can you install 'parking'revers'Drive'and nutral
@adamtaylor2851
@adamtaylor2851 5 жыл бұрын
You mean a transmission?
@yrocnaeb
@yrocnaeb 7 жыл бұрын
What do you do with the extra 2 inches of threads sticking out past the wheel?
@KartFab
@KartFab 7 жыл бұрын
You can cut it off.
@yrocnaeb
@yrocnaeb 7 жыл бұрын
I just bought a live axle kit from GPS and the extra flustered me a bit. Have you played around with they're predator 212 engine mounts?
@KartFab
@KartFab 7 жыл бұрын
The “extra” is for different types of hub mounts so it’s compatible with mounting more things to the axle. I’ve used the predator mount on the mini bike you see in this video. I’ve also used their bigger motor mount for Honda gx390/predator 420 engines. Good mounts to weld onto frames because they have that lip on them so they don’t flex like a flat plate.
@themechanic764
@themechanic764 7 жыл бұрын
can you help me with my rear axle do hickey?
@KartFab
@KartFab 7 жыл бұрын
+Robbie-rob Garcia what's up?
@12.xndrik72
@12.xndrik72 10 ай бұрын
What inch bolt did you use?
@KartFab
@KartFab 7 ай бұрын
5/8
@Optprime76
@Optprime76 9 жыл бұрын
Can I use a live axle with the free plans?
@KartFab
@KartFab 9 жыл бұрын
+Jordan Avendano they have the standard live axle kit instead of the free plans kit, which is almost identical to the free plans (brakes are set up differently, brake rod, and live axle weldment is set up differently, engine mounting is centered with a special piece of steel bar) So........other than that, they are virtually identical. If you got the deluxe live axle kit, you would be in hot water and need to buy my live axle plans to follow it. the standard live axle plans come with my deluxe live axle plans. Its up to you if you want to go without the plans, I just offer support for those that bought plans, not those that did not.
@Optprime76
@Optprime76 9 жыл бұрын
+KartFab oh well I'm just a high school kid with a budget so I had to choose the free plans, but I appreciate the input, oh and your videos are really helpful I've been working with my teacher in my welding class to make this go kart I just hope it turns out well. Once again thanks for the info
@KartFab
@KartFab 9 жыл бұрын
No problem, just dont cut corners with the braking system, and never run it without a kill switch close by.
@carlcampbell1803
@carlcampbell1803 8 жыл бұрын
I am looking for a axle that moves both wheels but on a small budget can you tell me how please
@KartFab
@KartFab 8 жыл бұрын
kartfab.com/live-axle-go-kart-plans
@carlcampbell1803
@carlcampbell1803 8 жыл бұрын
Thanks
@bloodxpubg9440
@bloodxpubg9440 7 жыл бұрын
can we use a genrateor to make this go kart
@KartFab
@KartFab 7 жыл бұрын
+creative channel yes but generators usually have a tapered shaft. You may need to double check and other an adapter for the shaft.
@bloodxpubg9440
@bloodxpubg9440 7 жыл бұрын
can we use Electric welding to join the iron roda
@bloodxpubg9440
@bloodxpubg9440 7 жыл бұрын
sorry rad
@i2aspire
@i2aspire 9 жыл бұрын
what gear ratio would you use with a 6.5hp and 19" wheels.
@KartFab
@KartFab 9 жыл бұрын
+i2aspire clutch or torque converter? off road or on road? racing, or for fun? weight?
@jonathant5774
@jonathant5774 8 жыл бұрын
What is the hub for the sprocket called on a dead axle
@KartFab
@KartFab 8 жыл бұрын
+Jonathan Torres the hub is part of the drive wheel, it is the rim. So the drive wheel assembly contains the rim/hub, brake, tire and sprocket.
@TestFilmProductions
@TestFilmProductions 7 жыл бұрын
or just add two engines and rig it up to where to throttle is equal on both wheels so you'd technically have more power
@familyfun6167
@familyfun6167 4 жыл бұрын
What is a cheap welder
@aju5405
@aju5405 6 жыл бұрын
i want to make a go kart from scooter engine.i need to use the scooter tyres.can anyone suggest a proper way to make axle for that?
@joseferrer3192
@joseferrer3192 2 жыл бұрын
Is there a way to contact you privately?
@marioreinoso4896
@marioreinoso4896 8 жыл бұрын
i am going to build a go cart but i dont know how wide and long can you help me wiht that
@KartFab
@KartFab 8 жыл бұрын
its in the plans, just have to open them and look at the numbers.
@intensesnpr1131
@intensesnpr1131 9 жыл бұрын
Could I just buy a piece of 1"X1" and use that for the axle
@KartFab
@KartFab 9 жыл бұрын
+InTense Snpr1 yes, 11 ga, 1"x1"
@lazerduck9390
@lazerduck9390 7 жыл бұрын
any way to make a dead axle without welding? :)
@KartFab
@KartFab 7 жыл бұрын
+lazerduck not safely
@lazerduck9390
@lazerduck9390 7 жыл бұрын
alright, thanks for the answer :)
@KartFab
@KartFab 7 жыл бұрын
good luck!!!
@Its_Comett
@Its_Comett 7 жыл бұрын
Fucking duct tape
@abdelrahmanmohamed8164
@abdelrahmanmohamed8164 6 жыл бұрын
Its_Comett Ps4 😂😂😂😂😂
@TheDEAFHoney
@TheDEAFHoney 9 жыл бұрын
What kind of welder is that?
@KartFab
@KartFab 9 жыл бұрын
A MIG welder
@TheDEAFHoney
@TheDEAFHoney 9 жыл бұрын
+KartFab What kind of filler did you use?
@KartFab
@KartFab 9 жыл бұрын
I'm not sure what you mean. I MIG welded the go kart axle using .030 solid core wire for welding steel. The gas I used was 75/25 mix. You can weld using any type of welder, stick, tig, flux core, or solid core.
@TheDEAFHoney
@TheDEAFHoney 9 жыл бұрын
+KartFab Thank you
@TheDEAFHoney
@TheDEAFHoney 9 жыл бұрын
+KartFab One more question; what voltage is that welder
@Dannymclovin
@Dannymclovin 8 жыл бұрын
Lol just use a straight rod with two bearings and a welded sprocket on the rod any how how much is Steel at steel places is it cheaper than buying at lowes?
@KartFab
@KartFab 8 жыл бұрын
+LOLitzDanny if you use a "straight rod" it will likely bend. You should never weld an axle. Steel at a metal distributed is many times cheaper than lowes.
@Dannymclovin
@Dannymclovin 8 жыл бұрын
+KartFab ok thank you very much I appreciate your response
@JuanLopez-ml7si
@JuanLopez-ml7si 7 жыл бұрын
what program do you design your go-kart with I seen you're on the computer or phone what's it called
@KartFab
@KartFab 7 жыл бұрын
cad
@RAJEEVKUMAR-xk5pz
@RAJEEVKUMAR-xk5pz 4 жыл бұрын
Which material it's chassis made of
@KartFab
@KartFab 4 жыл бұрын
steel
@RAJEEVKUMAR-xk5pz
@RAJEEVKUMAR-xk5pz 4 жыл бұрын
@@KartFab please reply proper size and quantity
@RAJEEVKUMAR-xk5pz
@RAJEEVKUMAR-xk5pz 4 жыл бұрын
@@KartFab can a steel pipe carry weight of 500 kg
@intensesnpr1131
@intensesnpr1131 9 жыл бұрын
Does it matter if the metal is 2" by 2" rather than 1"by 1"
@KartFab
@KartFab 9 жыл бұрын
+InTense Snpr1 the axle material needs to be 1"x 1" in order for the bolt to be welded to it safely. If you were to use 2"x 2" material for the go kart axle, you would probably need to add a section of steel plate to to the ends and weld the bolt to that steel plate. If you have enough fabrication know how, you can make most things work. Think of it this way, buy a piece of 1"x1" steel for at most $2/foot and you are going to spend about $6 max with no headaches, or you can try the 2"x2" and see how it works.
@aleckey3076
@aleckey3076 8 жыл бұрын
yes but they aren't the same size as the tires I need to put on the go kart
@brandonfix3383
@brandonfix3383 8 жыл бұрын
how does the tier move then?????!#?
@KartFab
@KartFab 8 жыл бұрын
+brandonfix engine turns clutch, clutch turns chain, chain turns drive wheel sprocket, drive wheel sprocket turns drive wheel assembly. Drive wheel assembly has two bearings on it that ride on the longer bolt.
@brandonfix3383
@brandonfix3383 8 жыл бұрын
+KartFab ok thanks
@Handle_gravel
@Handle_gravel 6 жыл бұрын
The Bering is on the wheel
@amarkhushitumi3013
@amarkhushitumi3013 7 жыл бұрын
Sir please tel me how can i made reverse gear in go kart please
@KartFab
@KartFab 7 жыл бұрын
You buy a FNR gearbox and run the clutch to the gearbox and figure out shift linkages.
@bhupendrapdesai7812
@bhupendrapdesai7812 7 жыл бұрын
can u give in reply mazerment of each part I.e lanth.width outer n sub lanth n width inner.how much cost of of part without engine as I have engine.please please reply urgently.
@KartFab
@KartFab 7 жыл бұрын
video description
@stewartpoulnott2367
@stewartpoulnott2367 6 жыл бұрын
How long is the axle
@theredneck2427
@theredneck2427 9 жыл бұрын
what welder do you have
@theredneck2427
@theredneck2427 9 жыл бұрын
would this MIG-130 Flux Core Auto Wire Welder work
@KartFab
@KartFab 9 жыл бұрын
any welder will work that is 90 amps or higher.
@theredneck2427
@theredneck2427 9 жыл бұрын
alright just bought it looked up a revew on it and they sed it was good my dads old welder gave out
@Gar1xYT
@Gar1xYT Жыл бұрын
where to buy the bolts?
@KartFab
@KartFab 7 ай бұрын
Tractor supply
@devontaebarnes4332
@devontaebarnes4332 8 жыл бұрын
how much would u charge for that dead axle
@KartFab
@KartFab 8 жыл бұрын
I dont sell things I make to people.
@Gokywildcats11
@Gokywildcats11 3 жыл бұрын
What size tubing was that
@KartFab
@KartFab 3 жыл бұрын
1”x1” 11ga
@johsepsaurav1892
@johsepsaurav1892 6 жыл бұрын
can you provided 3D degine of it
@kevinespinal9807
@kevinespinal9807 7 жыл бұрын
What the software you use to make thus stuff called
@KartFab
@KartFab 7 жыл бұрын
+Kevin Espinal CAD
@mr007moustache
@mr007moustache 9 жыл бұрын
what program do you use to make your plans?
@KartFab
@KartFab 9 жыл бұрын
Cad
@marcoscalderon1074
@marcoscalderon1074 5 жыл бұрын
Como puedo comprarlo. Soy de Perú
@1catbrains
@1catbrains 6 жыл бұрын
I would have ground the head of that bolt enough to slide in the tube. Plug weld inside and bead outside, much stronger.
@madhumotovlogger8656
@madhumotovlogger8656 6 жыл бұрын
.i want to buy a engine please give link to me
@Witchdoctor707
@Witchdoctor707 8 ай бұрын
Good vid! Concise. Exactly what i was looking for. I’m subscribed.
@KartFab
@KartFab 7 ай бұрын
Awesome, thank you!
@garage7066
@garage7066 5 жыл бұрын
That's not a live
@devanshgupta2702
@devanshgupta2702 7 жыл бұрын
bro i need a help i want to know how to paint a fibreglass​ sample plz tell this in ur next video its urgent
@bigdogbigben
@bigdogbigben 8 жыл бұрын
love your videos. can you make a video of a live axle being installed?
@KartFab
@KartFab 8 жыл бұрын
yeah, by the end of the year.
@timadams8963
@timadams8963 Жыл бұрын
​​@@KartFabdid you ever get the chance to post that live axle assembly video? Can't figure out how to stabilize the axle from sliding laterally.
@dereksmith7781
@dereksmith7781 3 жыл бұрын
I’m going to add to mine, an electric motor for the opposite wheel, to act as a kind of boost.
@bhupendradesai5506
@bhupendradesai5506 7 жыл бұрын
send me free gokart plant book which show all mezerment two seater in gokart which engine used please reply for engine name
@KartFab
@KartFab 7 жыл бұрын
+Bhupendra Desai ok, just read the description.
@varsallyzibyan9081
@varsallyzibyan9081 8 жыл бұрын
how to do a 2 wheel drive?
@KartFab
@KartFab 8 жыл бұрын
Did you read the description/
@bigdogbigben
@bigdogbigben 4 жыл бұрын
I love your videos. Thank you
@janukachandrasena5915
@janukachandrasena5915 4 жыл бұрын
Wow, this was the guide I needed!
@RX.45FN0RMAC10_
@RX.45FN0RMAC10_ 4 жыл бұрын
I'm working on a dune buggy right now and ur like very helpful
@sumedalpaca
@sumedalpaca 3 жыл бұрын
love these man keep it up!!
@erostime1
@erostime1 8 жыл бұрын
vamos por ahí excelente
@iivanbautista3583
@iivanbautista3583 8 жыл бұрын
marco prado como estas asiendo tu prollecto men???
@dursuncanibek8818
@dursuncanibek8818 9 жыл бұрын
this is not a live axle?
@KartFab
@KartFab 9 жыл бұрын
+Dursun Canibek correct. However, I made 2 versions of live axle go karts with plans here: kartfab.com/live-axle-go-kart-plans
@observantservant2135
@observantservant2135 6 жыл бұрын
No, its not. Its calles 1 wheel peel
@daftfox8067
@daftfox8067 6 жыл бұрын
I think you forgot that the axle needs to be able to roll both wheels under power. Welding the axle to the frame is just replacing what you already had with a different version of what you had and not what you intended on showing the viewer. Use a round bar and weld blocks to the frame to hold the bearings for the axle so it may roll. I'm surprised no one caught the mistake. Good video either way.
@KartFab
@KartFab 6 жыл бұрын
thanks for the comment, but you actually are watching one video in an entire series of videos that are for specific go kart plans for this build.
@manakjain4171
@manakjain4171 7 жыл бұрын
from where can i but i leave in india
@ironwill04
@ironwill04 4 жыл бұрын
This had nothing to do with live axles.
@BuskerBoyConal
@BuskerBoyConal 10 ай бұрын
Wdym?
@VU3ZNL
@VU3ZNL 7 ай бұрын
​@@BuskerBoyConal the tittle was a bit misleading as he writes diy live axel which means engine power is transmitted to two wheel but he shows video of dead axel which transmits power to one wheel
@itsammar_
@itsammar_ 4 жыл бұрын
thx man this helped a lot
@breeve9742
@breeve9742 2 жыл бұрын
Video says it's for a live axle in the title...but the content is for a dead axle...
@neelanaik3980
@neelanaik3980 8 жыл бұрын
MAKE MORE
@intensesnpr1131
@intensesnpr1131 9 жыл бұрын
Ok thank you
Go Kart Build: Floor Pan
2:55
KartFab
Рет қаралды 296 М.
Live Axle Swap on the $50 Go Kart!
32:57
CarsandCameras
Рет қаралды 998 М.
Жездуха 42-серия
29:26
Million Show
Рет қаралды 2,6 МЛН
Go Kart Materials: How to Build a Go Kart: Frame Materials
8:11
I Made a MOVING DOLLY into a GO KART!
38:59
Gambler Spec
Рет қаралды 979 М.
HOW TO: Change Your Go Kart Axle The Easy Way - POWER REPUBLIC
9:33
Power Republic
Рет қаралды 53 М.
DIY Homemade Kids Go Kart
21:39
KJ
Рет қаралды 218 М.
Making a new trailer axle #2021
1:40:46
Andy Mechanic
Рет қаралды 810 М.
Making Go Kart Bike Rear Axle - Go Kart Bisiklet Arka aks yapımı
8:34
live Axle from amazon review
12:52
Trucks And Junk
Рет қаралды 4,4 М.
Easiest Go Kart Build Ever!
24:55
Tommy.
Рет қаралды 82 М.