300W class D power amplifier

[@CXensation]

Yup - it sounds exactly like the boyracer car installations with 2 x 1000W. Lots of bass with 50% distortion.

[@albertjansen5996]

Indeed, this can't work properly, the chip can't do high frequencies and the output filter is completely wrong. And why would you make a 300 watts digital amplifier for a 5 watt speaker. And no speaker protection. I have a lot of the A-Exprss 1kw digital amplifiers and i have to say it sounds as good as my PA's not bad and tested it for 1500 watts a piece and still no problems. I build 12 from them in a box and 8 1500watt power supplies plus and minus 90 volts. Now i don't need to take all 6 2400 watts amplifiers with me and that's great while those weight 6x35 kg and my own made one only weights 30kg ☺️

[@CXensation]

@@albertjansen5996 The problem with PWM amplifiers are the very harsh clipping if the input is overdriven. You should not modulate to more than 99%, and that is very hard to control with music input. Besides the output filtering problems ... The circuit shown has one BIG advantage though: It is easy to adjust for a set frequency of 50/60HZ sinevawe using it for a pure sine mains converter, provided the circuit is modified for the required voltage.

[@yagneshpatel1183]

Thanks for such a video. I love to see some amplifier video like this .it so pleasure to see audio freak like me .

[@kdcreativity6201]

Thats a lot of mosfets 😍🤩🤯🤯

[@visionofwellboyofficial]

Where?

[@Uraim]

@@visionofwellboyofficial i want to ask the same xdd

[@16BITMEME]

Please make Lab power supply for biggener ( High Current one) 🥺🙏⚡ Simple one

[@diegfb2001]

Download link isn't working!

[@susobhan-5139]

Can we use sg3525 instead of using expensive ir2153

[@therealjammit]

I don't think so. The IR2153 is just a mosfet driver. The analog to digital conversion happen in the op-amp in this circuit. The SG3525 is a PWM controller. You might be able to make something work with the SB3525, but it's definitely not a direct drop in replacement.

[@susobhan-5139]

@@therealjammit no bro lm311 is a comparator ic which is convert analog signal to digital and feed to ir 2153 ocillator pin to enable and disable .Though this concept we can create high frequency spwm signal..

[@KasyanTV]

2153 dear? no friend, you are confusing something, this is a cheap and affordable IC

[@KasyanTV]

@@susobhan-5139 At 2153, a conventional converter is made, provides a carrier with a fixed frequency. We modulate the analog signal to this frequency. At the output of such a converter, the signal is far from sinusoidal, the output filter smooths this signal to more or less similar to a sinusoid. Technically, these days the class is far from ideal, in order to compete with the A / AB class, you need to raise the carrier frequency to very high values, and this will cause a number of problems associated with controllers and rather power switches.

[@susobhan-5139]

@@KasyanTV sir I make a class d amplifier using sg3525a..so that's why I am telling you ..using sg3525 instead of using 2153(using protues software)...by the way have a great day 😃😃

[@tiefhardwarelab]

thank you for share with us!

[@jtk3983]

layout file cannot be opened

[@Muhomorchick]

Пора учить английский:)

[@edielnmatos235]

Hello, your class d 300w project is very beautiful and I would like to have one of those, but what a pity the layout file is corrupted and does not open in sprint liout. If you can share a valid file I would be grateful. thanks

[@budipj]

I've tried this class d amplifier circuit, it works but there is a hissing noise and the distortion in the bass sound is quite large, so I don't recommend this amplifier I'm from Semarang, Central Java, Indonesia

[@rikzakhamami7454]

Did you ever try to bump up the supply voltage?, Maybe that distortion in the bass frequency because of the voltage drop across supply voltage

[@electronic7979]

Very good 👏

[@paintcob]

Greetings, why is it that when two channels are assembled for stereo version, an interference noise is heard in the background, while in a single channel that annoying noise does not appear?

[@ruslankorshagin]

Надо разносить частоты шим

[@iblesbosuok]

I think it is better to apply IR2184 or Si8234. See you

[@ourchannel8215]

do you sell this pcb??

[@a.f.e-project5210]

is it safe if the speaker output is disconnected or not plugged in when the amplifier is on?

[@therealjammit]

I would say have a load connected at all times. The inductive kick from an unloaded inductor can get pretty bad.

[@KasyanTV]

We did not notice any problems of this kind. This device is surprisingly reliable, during the tests I incorrectly connected the polarity several times and nothing happened to it.

[@sagorrana2051]

Please build 1000watt class AB Transistor driver board. However Thanks a lot for this video.

[@KasyanTV]

Thanks. So far we have only a couple of amplifiers for 200 and 300 watts in plans.

[@leonardochiruzzi7642]

Another amplifier!?! - Patience!! anyway thanks for the video - PS: you spelled amplifier wrong!! ;-)

[@logicaltrojan7750]

great video make an class d 5.1 or 7.1 chanel amp....

[@edielnmatos235]

ARCHIVE NOT EXIST ERROR FILE LAYOUT

[@Catatanhanif1]

Mantab mas bro..🤭

[@sr.maxwell6808]

very good!! like!!

[@smarinetuzla]

Hi bro

[@mariote1359]

kiks great thankyou

[@subhrajithalder6080]

First view 🔥 first comment 🔥 first like 🔥

[@samoyeganyan]

Klass 🤙🤙🤙🤙🤙🤙

[@debasishroy2017]

Plz upload PDF

[@DavidMG99]

👍👍

[@JyH_electronics]

THD+N = 50%?

[@KasyanTV]

Not really, but personally we are not class D lovers. This option is for a subwoofer.

[@diegfb2001]

@@KasyanTV Exactly! This is perfect for a subwoofer, no high THD needed just move the cone with great force.

[@Uraim]

@@KasyanTV THD50% can be heard also in low tones.

[@aliasr407]

Please upload pdf

[@mariomusico2010]

300w with only +/- 30v?? Is joke??

[@Uraim]

it was sayin +-60volt for 300w

[@davidyoungquist3351]

Voltage and current can be amplified, power cannot.

[@digmatology]

Unsubing all channels until the dislike button works. No dislike? No like!

[@ahmedkaram40]

لو سمحت اريد دائرة باور سبلاي للتحكم في 50 فولت 15 امبير

[@HANNAH-vz1jw]

Shipping cost so high....

[@lingesdraugas9527]

xuij ot sasitie.