With each new video your art evolves and improves more! Congratulations on the talent!
@JumboRadish2 жыл бұрын
Thank you!
@calebhaddan14132 жыл бұрын
God i will never get over how good each and every ito wrap you do is so clean 🤌
@JumboRadish2 жыл бұрын
Thank you! Doing the Ito wrap is probably my favorite part about making Japanese swords!
@SlishySlasher2 жыл бұрын
Nice craftsmanship in this and I like the design of the Nindachi too
@JumboRadish2 жыл бұрын
Thank you! I wanted a classic Hollywood Ninja sword with Handachi fittings.
@S6rah2 жыл бұрын
Can you make the dragon slayer (guts sword) anime -> berserk
@3npitsu9922 жыл бұрын
Ok but who's swinging that?
@JumboRadish2 жыл бұрын
That is an endgame sword for me. When I have a bigger forge, I definitely will try to make it!
@3npitsu9922 жыл бұрын
@@JumboRadish you might need a powerhammer or some kind of heavy duty tool
@HeneralVisCatholic2 жыл бұрын
Or just try making the pre-dragonslayer, the pre-eclipse edition.
@billzielke67982 жыл бұрын
You do very nice work with a minimum of power tools. Very inspirational.
@JumboRadish2 жыл бұрын
Thank you!
@vinceianni40262 жыл бұрын
Beautifully done mister good job
@9daywonda2 жыл бұрын
Possibly the best one yet.
@JumboRadish2 жыл бұрын
Thank you!
@9daywonda2 жыл бұрын
@@JumboRadish Your welcome. Some time ago I saw a ninjato with covert weapons attached, I'd love to see you making one of these???
@varun0092 жыл бұрын
I'm so glad you guys got an anvil (shaped object), though, I have to say, you guys hammering that thing on a bench vice was super inspiring.
@JumboRadish2 жыл бұрын
Lol thank you!
@windt12 жыл бұрын
i hope next time we are getting yoriichi sword 😀 keep the good content up you guys are amazing
@JumboRadish2 жыл бұрын
Thank you! I am absolutely going to make his sword, but it might be a little later.
@Michael-vu1ob2 жыл бұрын
One of my favorites so far! Still waiting to see you make the Kenshin reverse blade sword! Please 🙏
@JumboRadish2 жыл бұрын
Thank you! I promise I will make his sword!!!
@isaacsudduth15742 жыл бұрын
That nindachi turned out amazing. The kind of sword a Shinobi would be proud to use.
@JumboRadish2 жыл бұрын
Thank you!
@tainowarrior57812 жыл бұрын
Now we just need to get it into Sho Kosugi's hands for true Hollywood authenticity.
@JumboRadish2 жыл бұрын
@@tainowarrior5781 Literally the inspiration for this sword!
@tainowarrior57812 жыл бұрын
@@JumboRadish When I was a kid, in Black Belt Magazine they used to sell a replica of his sword. Had all kind of gimmicks from a spike in the end of the handle, to a pull out dagger from the end of the saya and breathing tube. Visually, what makes it stand out is I think it was shorter than yours, but with a larger diameter guard. But how cool is it to know yours work better than the ones in the movie did?
@JumboRadish2 жыл бұрын
@@tainowarrior5781I was actually thinking of making the guard bigger, to truly get that Hollywood look.
@rhedskiddel22822 жыл бұрын
great work! tou should make a tachi, it's a terribly underappreciated type of sword
@Marshalloredsox2 жыл бұрын
Can’t wait to see what you do next!
@JumboRadish2 жыл бұрын
Thanks Marsahll!
@fabianomarques19422 жыл бұрын
Mais uma excelente espada parabéns pelo belo trabalho ✌️ . Admiro muito o seu trabalho.... Fabiano Marques - BRASIL.
@culchieman19952 жыл бұрын
as always, a great piece
@vitaminz53582 жыл бұрын
Your videos are always superb and you’ve got a new sub. I’ve seen you’ve been making one piece swords recently and I think it would be beyond amazing if you made Trafalgar Law’s Kikoku sword. It’s my favorite one.
@JumboRadish2 жыл бұрын
Thank you! I definitely plan on making more (eventually all!) One Piece swords :)
@AhsokaSnipz Жыл бұрын
I loved this! You're one of the few people I see creating Ninjato and other somewhat lesser known blades when compared to everyone making Katana and the like.
@JumboRadish Жыл бұрын
Thank you! I love Ninjato's!
@noneyabidness96442 жыл бұрын
I love ninjatos.
@JumboRadish2 жыл бұрын
Me too!
@nightraid72 жыл бұрын
Amazing job 🗡🔥
@yagami3912 жыл бұрын
Again the craftsmanship is lit bro I mean it's just low key incane I really like the menuki which was the first time you ever used. Great job😆😆😆
@tainowarrior57812 жыл бұрын
Often he justmade his own for older builds.
@lowkeystarlord95452 жыл бұрын
I love watching u guy I’ve wanted to make swords these videos are true impressive and inspirational I want to build on myself one day
@shaggyrumplenutz16107 ай бұрын
That's a lot better than a lot of ones I have seen guys with top-end gear make.
@johnnyguitar6639 Жыл бұрын
Dude! Your work speed. Put most city official workers to shame.😁 Excellent Katana by the way
@raven322 Жыл бұрын
Very cool man!! you inspired me to make my own Nindachi!!
@jonahquichocho81032 жыл бұрын
Bro you are one awesome creator, u should do like a huge custom sword or something
@Suprator2 жыл бұрын
Bro you deserve way more subs for your work 😕 I love watching your videos keep going 😃
@JumboRadish2 жыл бұрын
Thank you!
@NutS232 жыл бұрын
*Fun fact* : Ninja's Has Shorter Sword than samurais because Ninja's often use there sword For stabbing but sometimes they use it for slicing too...and the whole Sword they use them for climbing obstacles that they can't reach.
@vergilthedarkslayer.33842 жыл бұрын
I like your profile
@mailais34032 жыл бұрын
That’s not a fact… ninjato or ninja swords are made up weapon from the 20th century for plays and theatres and did not exist historically.
@ilesanmioluwafemi62862 жыл бұрын
They 7th hth rub 5 vhh q
@fatedcrow38082 жыл бұрын
another things is that they could use the scabbard as a listening tool so that they could hear through doors and walls
@jimdellaghelfa8232 Жыл бұрын
Is that real leather ito
@tainowarrior57812 жыл бұрын
It's so nice to see you employ a full samegawa. Your revised polish shows off the yokote better. I'm curious, do you champher the mekugiana? Its a nice touch to add. You should try doing yasurimei and make it look really authentic. Yeah its a lot of filework on a part that isn't seen much, but think of it as another step forward.
@JumboRadish2 жыл бұрын
Thank you! This is the first time I worked with real Samegawa and I absolutely LOVE it! I also love the look of yasurimei file marks, I will definitely try it in the future. I love all these suggestions, I feel like I am getting better because of them!
@tainowarrior57812 жыл бұрын
@@JumboRadish I just had an idea, you could maybe fake the funk on filework if you used the dremel with a wheel. Could probably cut down on the time drastically.
@atharvacharhate42092 жыл бұрын
Best as always! 👍
@JumboRadish2 жыл бұрын
Thank you!
@monkeyhenderson2 жыл бұрын
Outstanding work, subscribed, look forward to seeing more from you
@JumboRadish2 жыл бұрын
Thank you! I love making Japanese blades, but I love all weapons!
@monkeyhenderson Жыл бұрын
@@JumboRadish I feel the exact same way, working on my own version of this now inspired by your videos to get back to the forge
@GarageArt2 жыл бұрын
Good job 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@rycktunn84882 жыл бұрын
Yes I would buy that
@amyross4726 Жыл бұрын
you did a excilent job on the kisaki the yikota is flawless incredible sword
@zulfikar34404 ай бұрын
Fully Awesome.... amazing ninjato
@adamwilder14072 жыл бұрын
Yet again im so proud. I love that you used real samegawa! also the Tachi style kashira is fantastic and is a hallmark of a sword-makers experience, excellent job! I plan to make some as well.I see you changed your braze rod again! is it the silver solder/muggy weld? or? Thank you again for uploading on a daily basis and inspiring other craftsmen. God Bless!
@JumboRadish2 жыл бұрын
Thank you!!! This was my first time working with real Samegawa, and I LOVE it! I also love Tachi style fittings and have never seen them on a ninjato before. I did change solder to muggy weld (SSF-6 56%), and I gotta say, it is sooo much easier to work with than brass solder. It has a much lower melting point and supposedly has much higher tensile strength. It is much much more expensive, but I would say that it is worth it.
@dsanchez97034 ай бұрын
Super cool
@nahunflores5973 Жыл бұрын
Looks alot like ninjato. Nice!
@thunder95432 жыл бұрын
sweet
@user-op5iw5jd2o2 жыл бұрын
Kenshin Himura, the main character of the sword of the wind, please do the reverse blade sword 🙏
@user-zq6mb6io7p8 ай бұрын
You have a very special talent and I admire your skills keep it up🎉🎉🎉🎉🎉🎉🎉
@MrNinja913 Жыл бұрын
Nice job boys
@swordkingjedimaster0032 жыл бұрын
Could you make a SAMURAI JACK SWORD FROM CARTOON NETWORK FROM SCRATCH ?
@lucasoconnell53952 жыл бұрын
Great videos, very entertaining! could you make Vergil’s Yamato from DMC5 next?
@thomasnielsen89042 жыл бұрын
Can you make Grey fox sword from metal gear solid
@draven862 жыл бұрын
Nice work guys. So next up the sword of Zorro from the mask of Zorro?
@itachi6544ghost2 жыл бұрын
NICEE
@austinkoontz5466 Жыл бұрын
Cool.
@bananabuns2 жыл бұрын
Can you create Shanks Sword from One piece? I think that would be cool.
@V3xDev2 жыл бұрын
Hey jumbo radish, I love watching your videos and i want to start making knifes, swords etc. out of metal aswell, but i don't know where to start, do you think you could tell me what i should do to start?
@JumboRadish2 жыл бұрын
I think a great starting place to start would be to check out the video "How To Make a Fighting Dagger Out of an Old Steel File" from fellow KZbinr BackyardBowyer. It is actually one of the videos that helped me when I was getting started knifemaking.
@V3xDev2 жыл бұрын
@@JumboRadish Thank you, I will look into this!
@JumboRadish2 жыл бұрын
@@V3xDev Let me know if you have any questions! There is much more to get into, that video is just a good starting point.
@V3xDev2 жыл бұрын
@@JumboRadish I only have one question, I don't have an angle grinder, is there anything i can use as an alternative? Or do i need an angle grinder? Thanks in advance.
@JumboRadish2 жыл бұрын
@@V3xDev No problem! You can do everything an angle grinder can do with hand files. The main thing is to be able to clamp down your work piece (with C-clamps or a vice). I don't know if you have seen it, but check out my Wakizashi video. I do everything with no power tools in it.
@user-iw7oi8qm5l Жыл бұрын
Just Like A Nodachi/Odachi
@Garliks_2 жыл бұрын
Could you try to make brook's sword from One Piece?
@user-gw1qo6qw9v2 жыл бұрын
skillful work おめでとうございます
@synchronization26702 жыл бұрын
Could you please try and make gyomei's Hamaxe and flail? I know it will be hard but i would love to see you do it!
@JumboRadish2 жыл бұрын
I will give it try soon :)
@jfa5342 жыл бұрын
Make enma please 🙏 😢 Amazing work tho
@javiermg08202 жыл бұрын
create your own custom demon slayer katana
@MrAth0012 жыл бұрын
Yoriichi sword 🗡️ please 🙏🙏👍👍❤️❤️
@herreragonza58912 жыл бұрын
Outsdanding work as usual! What are the measurements for this particular sword?
@JumboRadish2 жыл бұрын
Thank you! The blade is 21 inches long, 11 inch long handle, guard is 3x3 inches.
@herreragonza58912 жыл бұрын
@@JumboRadish thnx for the reply. I'm Gonna star a similar project and always wondered what is the thickness you usually make your blades because they look super balanced and proportional
@nickmarcotti81672 жыл бұрын
Most KZbin sword smiths get Japanese swords all wrong, but you kinda nailed it! Great job! I hope this doesn't come across the wrong way, cuz I'm seriously impressed,, but I was hoping you'd gun blue the fittings. Is there a reason you chose to spray paint them instead? Just easier?
@JumboRadish2 жыл бұрын
Honestly, just because it was easier. I do love blued fittings too though.
@nickmarcotti81672 жыл бұрын
@@JumboRadish thanks for the reply. I get it! Maybe your next ninjato build!
@Turtle3022 жыл бұрын
Can you make obanai iguros sword from demon slayer? Love the vids!
@debusuomi30402 жыл бұрын
can you make yuji's blade from jujutsu kaisen
@iceycubez29612 жыл бұрын
Make the Akakiryu from Juggernaut's item in Dota 2
@miguelangel-tp6wr2 жыл бұрын
can you make tanjiro's katana at the end of the manga
@urzmontst.george63143 ай бұрын
I have the same anvil
@sdwlmkcgarou2 жыл бұрын
can you make zoro's sword sandai kitetsu?
@wilston6632 жыл бұрын
Obanai iguro katana pleaseeee!!!!!!!!!
@Dookiefly-vg3vn2 жыл бұрын
Can you make a custom demon slayer sword
@u12blackrose382 жыл бұрын
a bit of a selfish request here i'd like to see them make DMC5 Yamato because why not
@moisesmontescyberbot001-cy92 жыл бұрын
Very good sword, a question, what kind of glue do you use for the handle?
@JumboRadish2 жыл бұрын
I use Gorilla glue 5 minute clear epoxy. I used to use wood glue, but that takes all day to dry. I have had very good results with the Gorilla glue epoxy so far.
@moisesmontescyberbot001-cy92 жыл бұрын
@@JumboRadish I would love to buy one of your swords. I’m excited to have only one, hehe😊
@mrexpanded83682 жыл бұрын
I'm gonna keep asking pls make enma I won't stop till you do or you can make sandai kitetsu
@justatable50792 жыл бұрын
Hey jumbo, can you create your favorite sword? I wanna see what is your favorite sword in anime.
@DrinksCocoa2 жыл бұрын
could you make an exsorcist Teru Minatoto's katana?
@ivansmith62072 жыл бұрын
Obanai's sword from Demon Slayer
@lietus41922 жыл бұрын
Next murasama from metal gear rising!
@georgegarcia36662 жыл бұрын
can you make itachi's ambu sword? please
@leonilnabong91712 жыл бұрын
Make shushui or Emma from one-piece pls
@ashleygill28472 жыл бұрын
Can you please make that key sword from that one game
@Kid-A2 Жыл бұрын
What would be the difference between this and the ninjatō you made?
@giorgiapichezzi84242 жыл бұрын
Obanai giro sword plz 🐍
@Vantruong.2062 жыл бұрын
make kirito sword ❤️❤️
@kaedehara_kazuha1029.2 жыл бұрын
Wow
@skibididupdup3 ай бұрын
Can you make Toji's inverted spear of heaven or split soul katana?
@vorgenspal2 жыл бұрын
please make a vampire hunter sword D, i think it's an interesting project🙏🙏
@JRX_VRQ22 жыл бұрын
Suggestion:Sandai kitetsu
@uwuyotengohambreuwu29322 жыл бұрын
I would like to use it ⚔️
@otaku_m7md_5292 жыл бұрын
Do yoriichi's katana
@arthurtogo95352 жыл бұрын
Make a poseidon trident anime-record of ragnarok
@minato36102 жыл бұрын
Kirito sword, pls
@Veer_Hindustani_Gamer2 жыл бұрын
Pls make Yorichi Tsugikuni
@Veer_Hindustani_Gamer2 жыл бұрын
Agreed +1
@1968shinobi2 жыл бұрын
I want to to make me one ! What's the cost !
@anasofiarodriguezprado32192 жыл бұрын
can you make kaigaku katana from demon slayer
@kobet73412 жыл бұрын
Do you prefer a leather wrap for the handle or cloth wrap
@JumboRadish2 жыл бұрын
I absolutely love how leather Ito looks and feels. It has to be a good quality leather though, the cheaper leather wraps are too thin and rip easily.
@supreme_wz2 жыл бұрын
Hey man, I have been looking to get into making swords and in particular katanas. Which she’ll would you recommend, 1095, 5160 spring steel, or tool steel? I’m undecided 🤷🏼♀️.
@JumboRadish2 жыл бұрын
I have had very good results with 1095 and 5160 for swords, but have not used tool steel yet. If you have access to tool steel, you have to tell me how it is (I have been curious about it for a while now).
@dylanking1889 Жыл бұрын
Its looks like jack sword :)
@mrdraco35612 жыл бұрын
How about Leonardo’s Ódachi from Rise of The Teenage Mutant Ninja Turtles?
@racerxr1 Жыл бұрын
Excellent craftsmanship and demo. I have a demo in about 4 months. Will I be able to purchase a functional Ninja-to from you along with sheath ? Greatly appreciated.
@Genisis10822 жыл бұрын
ayo can we get dark aturia blade from fate stay night? with your sword making skills it would look epic
@Genisis10822 жыл бұрын
please replie
@JumboRadish2 жыл бұрын
I will absolutely make that :)
@Genisis10822 жыл бұрын
@@JumboRadish YESSSS!!!!!, make sure its the dark blade from when she says "morgan excaliber
@Shinzouu_2 жыл бұрын
Day 2 of asking for tanjiro's new nichirin from the manga
@nicolasm.a53282 жыл бұрын
Great video bro! Please forging the sakabatō (rurouni kenshin) please🤟