STOP JAMMING SISER Easy SUBLI HTV ( Best Print & Cut Settings)

[@susanbouillez7929]

Love that I found your video, so many others out there showing a crazy difficult way to use easySiser subli. They have you printing an outline on the easysubli paper and then printing on another paper the design and marrying up the two Thank goodness I found your method, its so much easier and is how easysubli intended it to be. Thank you so much for your clear and concise training!

[@katrinasgracefulcreations3711]

Yeah I don’t know why people are making it so difficult. That’s too many steps and crazy ones. Like you said it’s supposed to be easy. Glad I could help. I have 2 other videos as well.

[@barbra429]

@@katrinasgracefulcreations3711 can u give the link to the other videos

[@TanyaNelson70]

The other method is simply because a lot of printers won't feed the easy subli ....The alternate method is just printing on regular sublimation paper and then pressing it onto the easy subli .... Whatever works ....

[@cemellasavage5259]

This has to be the best video I’ve watched explaining Easy Subli. Now I’ll go use the subli I purchased months ago. Thank you.

[@katrinasgracefulcreations3711]

Thank you so much

[@MrEdsster]

Darling tasty was awesome. You didn't speak like we were idiots and i use tape on my mat as well even if it's a new mat. My problem with easy subli boot feeding is resolved. I tape a piece of typing paper to the shiny side carefully on the top to avoid the area used by the silhouette. Then print as i would normally. Works great for me. Only thru about 5 sheets away till i figured that one out. I like the sliding heat press i only have the small one made by siser. Thank you i hope you don't mind an old fart subscribing. I only make things for friends and family. Keep on rocking your doing great.

[@RVS214]

thank you so much...a lot of good tips....et15000 and et 8550...use the rear feed...also swing away press...I have one..yes it hovers straight up and down...

[@jessicasaddler5773]

Thank you, thank you, thank you! Other tutorials state to print on sublimation paper then press onto the EasySubli. I wondered if I could just print directly onto the EasySubli. Now I know! Game changer!

[@katrinasgracefulcreations3711]

Yes they are making it to hard and an extra step for no reason

[@nosmith4821]

Wow this worked. PREMIUM MATTE is the setting the paper needs to be set to on the PRINTER. So weird that I never had to change the settings before but so grateful you made this video, I was becoming stressed. Appreciate you sis.

[@katrinasgracefulcreations3711]

You're very welcome. I now use premium

[@jilliej7]

@@katrinasgracefulcreations3711 You said premium glossy in the video, not premium matte.

[@jilliej7]

She said premium "glossy" for subli

[@cathynewell9918]

Omg!!!! Thank you for that video. I was making shirts for my grandson football game and guess what? My subli paper started jamming. Ty love you saved the day. Will follow you from now on

[@katrinasgracefulcreations3711]

So glad I could help. Hope it works out.

[@2andor4]

Thank you for explaining so clearly. I find your technique videos the best to show the “How To”.

[@katrinasgracefulcreations3711]

You’re very welcome. Glad to help

[@labori.tiktok]

Thank you. So many questions answered in one video. Self explanatory. Best video by far.

[@katrinasgracefulcreations3711]

Glad I could help

[@corenescreations]

Hi! Great video, thanks! As far as with your Cameo not cutting the first time, I have a few tips & tricks that may help you. Change your registration setting back to “default” settings. (Try this without having your registration marks extended out), since it looks like you have them higher and lower so you can fit more on the paper. So again, reset back to default, then take your “thickness” to 100%. This will thicken your registration marks which will make the machine be able to read it easier. Also, place your paper, or cardstock, or whatever you’re using a little higher on your mat. Like 1/4” higher then the grid marks. This should make it much easier for your Cameo to read & cut so you don’t have to manually move it each time, hope this helps! Corene

[@andreawilliams6009]

This just worked for me. Thanks 😊

[@corenescreations]

@@andreawilliams6009 Im so glad!

[@melbalugo]

wow Im so glad I came across this video this is by far the most detailed video on this easy sub Ive seen thank you now Im going to try it

[@katrinasgracefulcreations3711]

You’re very welcome. So glad I could help.

[@Nene_2015]

Hi I use the silhoutte and cut it on glitter cardstock

[@KiesV]

Hello Katrina … Looks great! Question, what is the difference from mask and transfer tape? Are they not the same thing?

[@angieveasey671]

I have a epson ET-1500 and I am trying to use the htv roll in the rear feed. It tries to grab the sheet that I cut to size, but it immediately says paper jam. Can you help.

[@classiichick85]

love that i came across your YTPnyou are so kind patient and informative as you go into detail you also show it being done as proof 🙌🏼 all the best and good juju your way 🙏🏼

[@katrinasgracefulcreations3711]

Thank you very much. Welcome. Much more to come.

[@anaisanais808]

I need help.the roller of my printer 2760 isnot taking,holding the siser easy subli htv page?why.i may be need tape,to glue the siser easy su bly page to the regular siser subli page

[@damsem-w7s]

how do you put the siser easy subly htv in the printer 2760 to print? because the roll of my printer 2760 doesnot hold the siser easy subli htv

[@barbaraoliver3819]

Hi, I have the Epson 7710 as well and for some reason my printer want print the easysubli paper. I created a user defined setting for 8.4 x11 and I've tried the glossy print and it jams every time. Any suggestions?

[@danimartin4948]

i have a 4700 and once in a blue moon mine will load UGH Do you have any suggestions

[@judimecham7320]

On my back feed, it would jam. I use double sided tape on the shiny side and attach a plain piece of copy paper to it. Feeds like a charm…no jamming.

[@katrinasgracefulcreations3711]

Awesome.

[@Lurichards100]

Judi, thank you so much for sharing this hack. It worked perfectly. I can't tell you the frustration of trying to print on this paper. I am forever grateful!!

[@trscsaeg]

I think the siser people said you would get roller marks if you put this through a regular printer. Doesn’t look like you got any but not everything shows up on video. Do you get roller marks and if so does it affect the design?

[@trisharush6070]

You just saved me!!! I have been messing with this for 3 DAYS!!

[@jxm0213]

Hello. Ty for the video What are the setting on the printer setup that you use to print?. Mine comes out grainy even with premium gloss paper setting. Do you have it as standard print or high quality? Please help

[@lorisanderson7477]

So the white part of the mask is not used then? You just use the transfer paper of it? I have learned that you can often get it to cut better. When you use a black marker and go over the lines in the corner. Then it won't come with the sensor error. Thank you for your video. It really helped a lot! Lori

[@ramirezharrier]

Thanks for the tutorial in plain english lol. Got pretty good with HTV and sublimation onto white, and this is definitely the next step. Let's hope my $20 used craigslist Cameo 1 is up to the task

[@katrinasgracefulcreations3711]

Oooohhhh really didn’t know people even still used Craigslist. Hope it works great for you.

[@Irr23pr]

Nice tutorial… looks beautiful. Thanks for your time to show us.

[@katrinasgracefulcreations3711]

You’re welcome

[@adrirodriguez-schvemer9882]

Great video. But I'm still trying to figured out how to get a precise image cut with Cricut🙄

[@katrinasgracefulcreations3711]

I just uploaded a new video with the cricut and easy SUBLI. Look through my latest videos.

[@katrinasgracefulcreations3711]

Here is the video. Hope this helps. kzbin.info/www/bejne/qHaYdYSFdrt2iM0

[@chenateazwhite6969]

It keep jamming why is that

[@cgtorres3916]

@@chenateazwhite6969 mine too. I think it’s the kind of paper. This one sub paper I had I think it was not good or something.

[@GenuinelyJess]

Hello, My printer has been getting the paper jam error with EasySubli, which is strange because we have printed on it before. I changed it to premium glossy on the print screen and the printer, but am still getting the error :( I'm at a loss.

[@sheilaglenn7378]

Great video! I love Siser Subli. it works like a charm everytime. Keep the vids coming!

[@katrinasgracefulcreations3711]

It does but so many are having trouble with it. It works great for me.

[@darleneberry4753]

Thank you for all the videos you do! I have a Epson ecotank 2720 and I load papers through back no tray feeder. Do I put the paper in none glossy side facing me?

[@katrinasgracefulcreations3711]

The paper will come straight through so load it with the matte or rough side up. Glossy side down. The paper doesn’t flip through the machine.

[@jessicasaddler5773]

It really just depends on the printer. I have Epson XP-4100 that I use for regular printing and it loads with the printing side face up. I also have a EcoTank 3760 that I use for sublimation and the printing side goes down. The tray on your printer with tell you which way to load your paper. :-)

[@Huerak]

Thak you for such an informative video. I tried easy subli for the first time recently and it didn't dry after about half an hour under my press and another day just sitting out. Do you have any suggestions?

[@kaenja]

Good Morning Katrina. Can you clarify something for me please- Do you import your design originally to design space , select print and cut, send the design to your sublimation printer and then after drying the print, just place it in the cricut and cut?

[@joycelassiter9262]

Joyce here. When I was having a problem with my Silhouette cutting a print and cut, it was because I was using a Cricut Mat. I bought me the Silhouette Mats and it now cuts without a problem. I always thought it was the lighting in the room. Nope, it was because I was using the WRONG MAT!

[@CarlosHernandez-fl1ub]

Great job !!! they look awesome 👌 👏

[@summerclark6001]

So do you have to cut the excess away? Because it would all iron on?

[@jennylowe4486]

I can't use it without the mask bc when I place it under the press, the heat caused it to curl and won't lay flat.

[@peachesosweet]

Was this done on cotton or polyester?

[@josevelazquez1342]

Girl you are a beast, love the sw Sweatshirt. I got to convert my Epson Workforce pro WF-3733 just don't know how.

[@katrinasgracefulcreations3711]

Thank you so much. I have a video on how to convert an epson printer. Mines is the Ed 7710 though but should be similar steps. You can check that video out

[@Qk_704]

What am I doing wrong when I sublimation I print the image out then dry it then cut it out then use my mask pill the backing off the image then press it at 315 for 15 secs then when I pill the mask off the image starts pilling up on the mask

[@MrsAllum1]

My easisubli jams butninsee that someone said that they tape copy paper to it and have no issues. Going to give that a go.

[@lindseyteasley8294]

Ok so i have tried literally every setting, i have the same printer and paper. I can run my regular sub paper through my printer, my printer will print on the glossy side of the easy subli but it will not go through on the side it’s suppose to print on. When i put it in to print on the correct side it says paper jam. Can you help?! 😩

[@katrinasgracefulcreations3711]

I’m sorry I wouldn’t know what else to tell you. That’s all I do with my printer.

[@elainedavison61]

Those are beautiful!

[@msgabbybaby1]

Mines jammed and gave an error 0025 ugh and i do regular sublimation fine with my WF 7210

[@likitarucker6589]

Absolutely Beautiful!

[@shannoncly6592]

My epson worked fine but after a few prints the printer feed starts slipping and doesn’t grab the easy sub. I’ve tried so many ways and I’m hoping you can help me. Please help me.

[@katrinasgracefulcreations3711]

I wouldn’t know what else to tell you. I’m so sorry. You have to play with it.

[@pdokoonline]

Do you check high speed or high quality and slow printing...on video it looks like it speed...when I print it print more slowly than on this video

[@farreldebaltzo]

Hi Katrina! I think I heard you say you use Printers Jack ink, and haven't had issues with terribly long drying times. Do you have any experience with Hiipoo? I have an Epson ET 2800 that I'm waiting to convert once I figure out the best method and ink and all that jazz. There's so much to learn! Haha but I'm hoping to pull EasySubli off because this eliminates SO many steps I've seen some other places that have left me confused.

[@katrinasgracefulcreations3711]

I for this printer yes I used printer’s jack in other printers I used hippo as well and now I use cosmos ink

[@farreldebaltzo]

@@katrinasgracefulcreations3711 Great! Thanks so much!

[@user-uc3id1tp3u]

Loved this!

[@gollumsmeagul8266]

Hello :) and good....may i ask if the paper is Matt why do you choose Gloss on the printer setting?

[@DjPeatKeen]

Hy. Welcome from Austria. Thank you the video. But I have a question. My printer is epson wf7210. When I finish with the project in Silhouette studio and I go for printing, than in the printing settings in computer I must setup the premium glossy? Because you make this in printer. Buz the computer must make the same settings?

[@katrinasgracefulcreations3711]

I choose my print setting for the paper type on my printer screen

[@msantoyo20]

I have trouble with the easy subli not drying even though I put under heat press for 1min it’s still wet. Anyone have this issue?

[@two2tango222]

Me too. I’ve had ES since the debut and it won’t dry overnight nor under a heat press, I get the grainy paper and have had streaking. Great video but it simply doesn’t work for me unless I sublimate ONTO it. I’m happy that it works for some of us at least.

[@two2tango222]

Thanks for the video! Question. Did you have to make any adjustments in order to use the Cricut mat with the silhouette? I have one of those mats and never used it bcz I heard you have to do some recalibrating or something?

[@katrinasgracefulcreations3711]

No I have never had issues.

[@mjsdivastyleboutiquellc5969]

Thank you so much for this video! New to sublimation

[@katrinasgracefulcreations3711]

You are so welcome!

[@Poochiewhipple]

Have u tried using like the htv transfer tape with this ? Does it work ? Cause it’s so much cheaper

[@larrymcbride7053]

??

[@nuevodianuevocomienzocorte4982]

Thank you just what I need it the last one ❤❤❤

[@billwhite6352]

Did you go back and pick up the halo ?

[@JayJay-wk5dj]

Your prints always come out so crispy! I’d love to get some tips from you!

[@katrinasgracefulcreations3711]

What trouble r you having?

[@JayJay-wk5dj]

My designs never come out as crisp as they look inside of silhouette. What kind of ink do you use?

[@katrinasgracefulcreations3711]

@@JayJay-wk5dj printer’s jack it’s linked down below in the description box

[@JayJay-wk5dj]

Thank you kindly! Also, I know you said you put the settings on your printer on premium glossy. Is that what you have the settings on inside of silhouette?

[@judybarrett2697]

I would love to know the settings on your silhouette. Vinyl paper or card stock or? Please can you tell me that and thank you.

[@sharlissmccollum9866]

Great Video. Im going to try this process

[@katrinasgracefulcreations3711]

Awesome

[@lekysantiago8160]

Do you need to mirror?

[@virginiadancy6124]

I always get ugly black lines on my printed design EPSON 2803, also just read some comments about SETTINGS, I should set to Premium Matte, Premium or something else (they confused me. You recommend, one subli paper at a time, correct? I love EasySubli, but want to finally get a quality print. Thank you so much

[@katrinasgracefulcreations3711]

I was using 1 sheet at a time but mines work with more as well. And yes my settings are on the premium matte

[@virginiadancy6124]

@@katrinasgracefulcreations3711 Hi, is that the same as Premium Presentation Paper Matte (ET2803)?

[@lilimartz]

Are you suing water based or oil base ink??

[@meglizard]

You are awesome!! Thank you for sharing your process!

[@katrinasgracefulcreations3711]

You’re very welcome

[@user-uc3id1tp3u]

Still having issue with jamming! Epson ET2760 any ideas?

[@katrinasgracefulcreations3711]

That’s all I know to do sorry

[@elizabethdeleo426]

Great videos. I'm very new to all this and was wondering if there is another less expensive printer I can get to use for this? Thank you

[@chenateazwhite6969]

My cameo 4 still won’t cut the east siser can you please help me

[@katrinasgracefulcreations3711]

I have 3 videos on easy SUBLI settings are in the videos. I use regular siser settings. Everyone’s cutter and blades are different. You might have to go up in force

[@vicidlg5]

I've tried easysubli but when I print it leaves small streaks of ink. I'm assuming this occurs as my printer rollers (epson 7210) come in contact with the ink. Would you happen to know what I can do to stop this from occurring. Thanks for the video.

[@katrinasgracefulcreations3711]

Mines has never streaked while printing.

[@msgabbybaby1]

same it just happened with mines and it jammed but im using the 11 x17 sheets

[@jessicamoore5597]

Which is best Eco Solvent Ink for printing or sublimation ink

[@jessiegibson9023]

Good video thanks looks good ❤

[@evestersutton5966]

Awesome job

[@ronaldramsey7774]

Great video..better than most on the subject!

[@katrinasgracefulcreations3711]

Thank you

[@chelleslifestyle54]

What type of ink did you use? It's smearing when I put it through my cricut machine? I did apply it underneath my heat press for a few minutes but still got same results.

[@katrinasgracefulcreations3711]

I use printer’s jack with this printer. Link is in my Amazon store

[@sheriahill5907]

Mine jams. I only using one sheet. I don’t know what to do.

[@andreawyckoff424]

Thank you! This video was very helpful!

[@katrinasgracefulcreations3711]

Glad to help.

[@brownsugartrans]

what do you set your settings on with your cameo?

[@Michelle-xe2te]

Do you use an offset for your sublimation so that the cameo cuts the outside, what settings are you using to cut the design out and lastly my mask doesn’t stick to my design

[@katrinasgracefulcreations3711]

I don’t use an offset all the time. All the settings I used are in the video. Sorry I’m just seeing this

[@tiffaniwillis4226]

Thanks for the video! I have the epson et 2760 and the siser easysubli will not load for nothing 😒 any tips 🤔

[@katrinasgracefulcreations3711]

Not sure why sorry I never used that machine.

[@tiffaniwillis4226]

@@katrinasgracefulcreations3711 I figured it out......you have to put some more paper in so it can catch.

[@katrinasgracefulcreations3711]

@@tiffaniwillis4226 glad you figured it out. Everyone is having different. Issues. I only put a few sheets in mines and it catches.

[@donnierearden8334]

On my Cameo, if you lift the back end of the mat to about 40 to 45 degree angle … it usually will register the first

[@katrinasgracefulcreations3711]

Someone did tell me that a while ago. thank you

[@cherylnabors3094]

Thank you so much for the video. Can I ask, what temperature/time do you use on the heat press to dry the ink? I use Printer Jack's ink but the ink does not seem to fully dry even when left overnight.

[@katrinasgracefulcreations3711]

Wow really. My heat press is set for 315-320 and I hover over it for like 3 to 6 minutes. Once the color turns dark you know it ready

[@cupcakesmileworld752]

Love this video!!!!! Question, what is your heat press set out to dry the subli????

[@katrinasgracefulcreations3711]

3 hundred 15 degrees

[@cherylhayworth8838]

I tried to dry on my heat press, but the Easysubli stuck to the backing and I could not get it loose. I wasted a lot of sheets by doing that. I also tried printing with the Epson 15000 and it would not dry. It took days and days before I could safely run it through my Cameo. I used photo matte setting because, the vinyl has a matte feel to it. I will try again. Thanks so much for your wonderful videos.

[@katrinasgracefulcreations3711]

Don’t close the heat press or keep it there too long. That happened to me once when I had the heat press too high. Remember you apply it with heat so it will seal to the backing of its too hot.

[@jesuspadilla4338]

Highest video does this ik come off or peel after washing it

[@katrinasgracefulcreations3711]

I have a wash test video on this product as well. So it’s great quality. My son’s shirt is in great condition and it has been washed many times. Check out wash test video

[@tierragrant2590]

If i print from silhouette but only have a cricut explore air 2, will I still be able to cut it?

[@katrinasgracefulcreations3711]

Any cutting machine will work if it can do a print and cut method of you making cut out the silhouette and then sublimate image down on it

[@tierragrant2590]

@@katrinasgracefulcreations3711 so if im in DS i upload my image as just the silhouette so it'll cut it and print the design from silhouette so i can make it bigger using sublimation ink, line up sublimation design with the cut silhouette and press? Once i do that how am i able to get it onto the shirt? I dont have any of the subli masks and not sure if the glossy side of the carrier sheet can be used. Also do i only mirror the sublimated part and not the silhouette cut out?

[@sarahdoby6353]

Thank you for sharing. I thought people said that Cricut mat are a little off from Silhouette. Maybe that’s why you have to put it in that way?🤷🏽‍♀️

[@katrinasgracefulcreations3711]

I have no trouble when cutting regular vinyl. They are all the same. Just different sizes.

[@jessicasaddler5773]

@Sarah Doby, when I use Cricut mat with Silhouette machine, I have the same issue. It is a little longer from the top of the mat to where the grid starts. That's why it does not find the registration mark. It's an irritating extra step, but worth it to me, because Cricut mats come two to a pack, for same price as one Silhouette mat. :-)

[@guadalupereyes2001]

Thank you so much for the video 👌 I love your videos 🤗 I'm a new subscriber! What kind a white paper do you use?

[@Remi091]

Are those sweaters cotton?

[@lizandramachler7863]

😮😮😮❤❤❤❤❤👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻 the Best

[@megan_thecookiewaxer]

Hi! How do you get the picture to print in color?! Every time I print with TShirt Transfer paper it come outside in this lily yellow, blue & black color instead of the actual color it’s supposed to be 😩

[@MarissaR_777]

Because t-shirt transfer paper is made for regular ink jet printer not sublimation. Sublimation on sub paper like A sub, it always comes out dull looking, it's the heat that activates the sublimation ink. But transfer paper is for ink jet, that's why

[@crafting562]

If you are printing a full page, not using the print and cut, can you go ahead and press it without drying? Or is it better to let it dry overnight anyway?

[@katrinasgracefulcreations3711]

I always dry it under the heat press first for at least 2 to 3 minutes. But you can as long as you don’t touch it and the ink doesn’t smudge

[@kadiananderson864]

Do you know if the print to cut work with the cricut?

[@katrinasgracefulcreations3711]

I don’t have a circuit but it definitely should I have seen many videos with people printing and cutting. I’m borrowing my sisters to start using hers to make tutorials as well.

[@latoyasmith7093]

Love it🔥🔥🔥 Thanks for this video ❤️

[@jesuspadilla4338]

Great video does think washoff or peel after washing

[@katrinasgracefulcreations3711]

Here is the wash test video kzbin.info/www/bejne/jn3He3Stjahjg7s

[@angelaallen9428]

hi how do you set up the words for the sleeve? to cut

[@katrinasgracefulcreations3711]

The machine cuts whatever is in your software. I use silhouette studios. Just like an image. It cuts letters too.

[@johnmontoya5169]

Tape like an inch of regular printer paper on the back of your easy subli

[@eileenmuccillo20]

Hi where did you get that cool T shaped ruler? Thanks!

[@katrinasgracefulcreations3711]

Hello the link is down below in the description box. Heat press nation.

[@eileenmuccillo20]

@@katrinasgracefulcreations3711 thank you I noticed the link after I asked lol 😏

[@katrinasgracefulcreations3711]

@@eileenmuccillo20 no problem at all

[@lizzylopez2834]

Girl you are so funny love watching ur videos

[@katrinasgracefulcreations3711]

Thank you. 😆

[@jillspencer9447]

Hi there, i watched your video, but still confused. I have a real sublimation printer and paper and ink……can i not use my own paper to print out a design….and use the mask to iron it on cotton? Thanx in advance

[@katrinasgracefulcreations3711]

For any sublimation project you must use sublimation ink and paper for it to adhere. Inkjet ink will not work.

[@glendajohnson7534]

Hi Katrina your video are great learning experience I have the Epson et 15000 when I tried my first print I got lines on my print I hear everyone talking about on my image any Suggestions please and thank you for helping us all💕💕💕💕

[@katrinasgracefulcreations3711]

Run print head nozzle checks and do the print test until all the lines are straight. It’s always like that when you put in new ink. I have to run mines at least 5 to 7 times before the ink is perfect.

[@glendajohnson7534]

@@katrinasgracefulcreations3711 Thank you so much 😇😇😇😇

[@robertlewis9048]

Did you mean black lines like the pizza wheel marks. I'm getting those with glossy paper setting

[@hand4letters851]

I had the same problem with my workforce 7710 I tried different settings and nothing work its like the subli starts folding before it gets to print best thing that has work for me is making a crease in the paper long ways so it wont fold that should help and fix the problem!

[@katrinasgracefulcreations3711]

I never had issues with mines. Just showing others how I do it because so many other are having issues.

[@hand4letters851]

@@katrinasgracefulcreations3711 yea it's weird it the paper starts to fold up before getting able to print I tried regular paper and it works so the creasing the subli long ways worked and when I heat press the image it doesn't show any crease mark plus my wf7710 I had for yrs already like 2-3 maybe it's wear n tear

[@johnmontoya5169]

@@hand4letters851 tape like an inch of regular printer paper to the back and it'll feed

[@hand4letters851]

@@johnmontoya5169 Thanks for the idea!

[@johnmontoya5169]

@@hand4letters851 it works

[@emilianozapata7690]

@ Katrina, I have two questions!! 1. after applying your EasySubli HTV on your garment, does the HTV have a little stretch/elasticity to it???

[@katrinasgracefulcreations3711]

There is no stretch

[@eihcomssense1558]

Great video!!

[@katrinasgracefulcreations3711]

Thank you

[@meeshlvslobster]

Oh I see what the other person said about missing the halo... So if you finished pressing a design, and then realized part of it was missing, could you re-press it adding the missing piece without messing it up?

[@katrinasgracefulcreations3711]

Yes of course. Just like vinyl. The extra heat won’t mess it up at all. I have ironed my son’s shirt multiple times. No damage. It’s sublimation.

[@stellaharrison9390]

Does the package of 50 come with the transfer mask? I want to place an order

[@katrinasgracefulcreations3711]

No you have to buy it separately only the smaller packs

[@111484mt]

Thank you, it was a great video

[@katrinasgracefulcreations3711]

You’re welcome

[@myheartsoulcreations1624]

I just ran across this video but I am having this problem right know...let me try to change the paper setting!

[@katrinasgracefulcreations3711]

Hope it helps