KaVo ELECTROmatic Premium Dual Motor System - Product Video

[@clorofenol]

Can you switch handpieces without having to touch the screen to select the other handpiece?

[@KaVoDentalGmbH]

Hello, to get the real bur speed shown on the display, you have to implement the gear ratio in the set up position of the different position. But you have 5 positions, you can choose. So set up your system for 5 different handpieces and you select the defined position to the handpiece. If you will only see the motor speed, you set your system to gear ratio 1:1. You can find more details in the user manual of the ELECTROmatic TTM or the short instruction sheet. You can find it here: www.kavo.com/en/services/kavo-download-center

[@clorofenol]

@@KaVoDentalGmbH Can you have a high and low speed (one on each motor) connected and switch from one to the other without having to touch the screen to tell the machine to switch?

[@KaVoDentalGmbH]

@@clorofenol Yes, this is possible with the TMM Version with two motors. You need therefore two turbine-tubes from the Treatment unit and you hang the two motors into the Treatment-unit position where the turbine tubes were place. When you pick Motor one, the Treatment set the turbine tube 1 and when you push the foot pedal, the turbine tube 1 gets power. ELECTROmatic recognize that the connected turbine tube pas power and give electricity to the motor 1. The same process for the Motor 2 with the Turbine tube 2. If you need more assistant, the regional sales rep could help you.