Kawasaki Bayou 300 KLF300 Overview Review EXPLAINED Repair KLF

[@alexanderklepczarek8726]

I cannot stress how great a video like this is. It's so hard to just get basic information on an vehicle and I've learned so much and I know better on what's parts to buy. Thank you so much and please keep these videos going!

[@walterwoods8978]

Father in law bought a new to him 300 Bayou. It runs great. Good power. No gear slipping. Just starts rattling when it's about time to shift. Especially loud in lower gears. Doesnt seem to do it in neutral

[@tylercarlson1634]

That sucks

[@dalerardo3134]

I’m completely new to quads but the mrs brought one for her stable yard, their is no power at after I replaced the battery with a new one. This video will help me a lot getting to know about all the different parts and trying to fix the issue. Thanks man

[@MidNebraskaMotorsports]

Happy to help. May have blown a main fuse or ignition fuse. Let me know what you find. Have you hit the subscribe button? Thanks for watching.

[@austinjohnson3787]

you make amazing content and conveniently have 2 vehicles i needed to break down on your channel. keep up the great work!

[@TheUniversalEyes]

What does the crankcase breather tube connect to? The service manuals don't show how it connects. All I see is a rubber hose that goes down into the same location as the pickup coil wires, which is between the flywheel case and the gear case cover.

[@knightrdr1000]

I always like to watch these videos before I start working on these bikes. I find that and the diagrams on partzilla helpful. Thanks for making this video. I got a barn find that hasn't run in a few years so I hope to start looking it over today. These things are selling like hot cakes right now, so if you got one sitting around turn it into cash!

[@ulicesaguilera3238]

That's was very helpful now I know more about my bayou 300

[@Josiekaynjustin]

Would I be able to use a 98 lakota jug and piston on a 98 bayou 300 4x4? I cant find anywere if they are the same engine compatability

[@carolshoemaker2170]

@@MidNebraskaMotorsports does anybody know how to change a gear shift lever on a kawasaki 300 bayou?

[@ConnieSimpson-bi3pr]

And also you have explained everything so much better than anyone else and ty for that

[@rickharris5485]

You do a really good job of showing and explaining things.

[@MidNebraskaMotorsports]

Thank you. And thanks for watching. Let us know if there is anything else you need! www.midnebraskamotorsports.com/

[@imthedudemane]

Man! Thank God for you guys! And this video!

[@frankpineda1832]

Good video, I just purchased the KLF300 today

[@anthonygiachinta3056]

Thank you ! Great video ... Massachusetts

[@MidNebraskaMotorsports]

Thank you for watching and the comment. Check out our website if you need parts! www.midnebraskamotorsports.com/

[@anthonybarone4099]

Excellent vid

[@MidNebraskaMotorsports]

Glad it helped!! Thanks for watching and the comment. Have you watched some of our other videos on this same model? Also if you have need parts check out: www.ebay.com/str/midnebraskamotorsports

[@dougrobertson8658]

Glad I found this video as I just bought one exactly like this that needs work

[@joltboards5658]

Same here!

[@rebelredRC]

Hey so did i

[@JAKE3914]

sounds like ya know your stuff!! Question. . . when I put my 300 Bayou in gear...it DOESN'T move! Feels like rear end is locked up!!! (a little help; please). Thanks

[@franciscoh2148]

Excellent video

[@robertdanielslll3527]

Hello I was wondering if you could tell me a bit about the ignition wiring

[@Dirtbikesforlife16]

Great video you really know this quad.

[@deepbludude4697]

So as fate will have it some times, a buddy of mine in very small town we live in came to me with a second 98 KLF300, I picked it up for $400 primarily cuz it has brand new tires. It was an added bonus that after cleaning it up and throwing a charged battery in her and verifying some electrical connections concerns it fired right up but its smoking I just got the plastic off front and tank removed and noticed the Crank case vent tube at the tee was disconnected Im wondering if this would cause an oil issue/smoking issue. Carb was full of oil as was the exhaust but it started immediately. I have not confirmed compression yet but im assuming its good. This is my second KLF300C.

[@ConnieSimpson-bi3pr]

My question to you is. Is if my battery is no good so I can't use the electric start will it still get fire and run by the pull rope ty

[@lynnblackstock1861]

I have that machine but want start. Has fire but want crank

[@deepbludude4697]

Perfect!

[@MidNebraskaMotorsports]

Heck yea!! if you are needing parts for your Bayou, take a look at our ebay store. We have bayou parts discounted right now!! www.ebay.com/str/midnebraskamotorsports Have you watched our other videos on this machine? Check out: kzbin.info/www/bejne/p4G5nnZvrKujhpY. Thanks for watching and the comment!

[@deepbludude4697]

Already been ordering parts as my limited funds allow thanks!@@MidNebraskaMotorsports

[@MidNebraskaMotorsports]

Awesome. Use: MNMSAVE10 to get a discount on our store!

[@jeffreycarstens9998]

I have a 2001 bayou 300 4x4 and my engine is getting really hot when riding not glowing red but really hot where it’s takes along time to cool off any ideas

[@MidNebraskaMotorsports]

Drive faster! jk. These are air cooled so there is nothing you can do without adding fans or getting more air flow. Make sure your filter is clean and engine area is free from dirt build up. Let me know what you find. Thanks for watching and the comment. Let us know if you need anything: www.ebay.com/str/midnebraskamotorsports

[@cshippey]

I have a 91 Lakoda klf 300 that starts but will not rev up. When throttle is applied the engine continues to run but sputters and eventually floods out. I have installed a new carg, checked the timing multiple times and set valve clearance. I'm stumped. Any suggestions Thanks in advance. Love your videos. Keep them coming.

[@allenwhite6285]

Good to know

[@donnierowland3677]

I have a question, unrelated to this video. I'm trying to help a friend identify a Yamaha cylinder. Hoping someone can help. Thanks for the best channel on KZbin🤟 6:57

[@lmt-adventures620]

Have same bike, keeps blowing fuses, where should I start? Thanks I’m advance!

[@Random_stuff38]

Hi so I have this atv and I accidentally removed all of the vacuum Hosing like an idiot I forgot were the hoses go any tips

[@DeniseSlack]

Do you have a video on shifting issues?

[@sethslater8544]

I have one of these, and it runs, but when you stop and it idles, it will heat up and shut off and i will have to wait for it to cool to restart what is a fix for this issue? Any help would be great thanks

[@tammyrampersad921]

I have a question but I do not know what the part is called but I could explain it it's just past the front tires and it connects to the front shaft it is a 4x4 kawasaki

[@jonwill9940]

Hello, this is a great video and very helpful. I have got a question - I have got a 1994, Bayou, KLF 300C (4x4). I messed up with the two clutch adjust screws. I have tried very hard to find information or video on how to adjust those two screws. I have tried some of the tips on the google, but didn't seem to work perfectly. I was able to adjust partially working, but not the way should be. Most of the tips on the internet are for one adjust screws. Can you give me some advice as to how to adjust those two adjust screws under the clutch release cover. thanks in advance. Jon

[@kyleallen5913]

Aye I've got a question about this quad I've got the same one and I'm having trouble with it.

[@adriankeane3130]

Hi mid nebraska , do you know if a 300a centrifugal clutch is the same as the 300b Also the cam chain guides Many thanks from australia

[@gabe10222]

Just got a free one needs new rings and cam sprocket

[@boulton8895]

I was having figuring out how to remove the Cdi on my Bayou 300. Does any know how to remove it? Thanks!!

[@MidNebraskaMotorsports]

Lift it up and out of that rubber boot (band). You can leave the rubber attached to the frame. Thanks for watching. Let us know if there is anything else you need! www.midnebraskamotorsports.com/

[@64fin]

Great video

[@nestoralvarez98]

Thanks is a very good video

[@Nikolai784]

I have this same year 2 wheel drive. It used to run but sat for a few years but I’ve got it all tore down and I have good compression the push button start, kill switch, and light have been removed. I can’t figure out what wires went to the kill switch or if that’s even the reason it will turn over but not start? I’m really stumped any ideas will be tried thanks guys 😊

[@mse_playz7968]

Can you tell me where the vin number would be on these i can’t find mine

[@MidNebraskaMotorsports]

Bottom left of the machine on the lower frame rail near the lower aarm. Hope that helps. Thanks for watching. Hit the subscribe button as we have a lot more videos coming out on this machine. If you need parts or tools for the job check us out at www.midnebraskamotorsports.com/

[@totallyrandom9283]

Witch way do you turn the nut that is behind the pull starter

[@beastinahalfmode]

Hey man. I've watched, almost, the entire Bayou breakdown. I have a question though... My bayou is supposedly an 06 (has a sticker on the front of the frame that says it is -- just bought it.) The issue that I am having is that this little quad has been around the block, came back, and was sent again. Anything unnecessary has been clipped, and what is left is rigged and taped together. I was trying to see if the electric start would work, but it has no battery. I used jumper cables to hook my lawnmower up to the cut battery wires, and .. nothing. No click, no sign that power was flowing to anywhere it needed to. Any advice? I've not got a multimeter otherwise I would have started with that. I was actually wondering if you would make a short video giving a run down of where the wiring is supposed to go, and while you're doing that, giving a run down of the fuel lines/vent lines. I believe if you added that video, you'd of covered the entirety of the Bayou and would be a great source for anyone that was looking at doing any kind of work on one. Thanks ahead of time.

[@Dre_9011]

What size fuse goes on the battery connector that white cable

[@KageBlink]

Hey man, I cant find the video where you remove the front right drive axle. If you dont have one, how do you remove it? Mine is stuck and we've tried everything to getting it out and theres no guides for specifically this model. At least that I can find. Any help from anyone would be greatly appreciated

[@FranciscoHidalgo-l9v]

Consulta donde encuentro el número de vin en esos cuadras

[@lynnblackstock1861]

Where are you i will hire youbto fix my 300 kawasaki

[@WWFU]

Hey boss.. I have a question. Its gonna be a dumb one..Does a bayou 300 4x4 have a fuel pump? And where is it located

[@WWFU]

@@MidNebraskaMotorsports thanks so much for the clarification, does your carb rebuild video show how the gas lines and vacuum lines should be attached? The atv I'm trying to fix just turns over and if I pour gas into the carb via the line that was coming from the petcock valve / tank and try to start it, it sputters and occasionally backfires but mostly it just turns over and turns over.. I got it to start ONCE I don't know how or why bc it hasn't started since. Timing appears to be correct ... However I tried adjusting the valves using feeler gauges etc, prior to it starting the one time.. if I didn't adjust them exactly right would that be in line with what it's doing? It has good spark, compression, and power? Any ideas? Ty so much I'm really lost as to how I can get this thing working

[@jeremyhastings2961]

I have 2 blue wires and 1 brown with double connector under the dash. Do they plug into each other or just hang freely? Any help is greatly appreciated

[@jeremyhastings2961]

Ok thanks man

[@jeremyhastings2961]

Man i need some input. So i have the 94 300 4x4 and I am not getting any dash lights to come on. I haven't replaced the battery just working off jumper cables. The fuse was taken out and straight wired in. Burnt prong on rectifier. I'm not trying to spend a bunch of money to find out it isn't worth fixing. If you could point me in the right direction it would be greatly appreciated. Thanks in advance

[@jenjenpetmom]

Where does the vacuum hose go from the bottom of the carb? Does anyone know cause I can't find a nipple for it

[@Random_stuff38]

Same

[@cmjsparky2618]

It's just a breather hose not a vacuum line. Just face it down and your good

[@davidmilliken573]

Have a bayou 185 seems to be still slipping after primary and secondary clutch’s have be changed any ideas ??

[@davidmilliken573]

The clutch adjustment screw doesn’t seem to want to turn any way at all when the lock but is loosened even if the lock but is off

[@ericaperry4204]

he said everything except that thing thats under the carb that got two screws and its in the motor

[@mikeygillespie8057]

I have the same one what kind of motor oil am I supposed to get for it

[@mikeygillespie8057]

Thanks it sure was helpful

[@frankwlotzko4138]

I have a300 byu no key how can I start it

[@MidNebraskaMotorsports]

I'd buy an ignition switch for $12 off our ebay store. Check it out. Thanks for watching. Let us know if there is anything else you need! www.midnebraskamotorsports.com/

[@chwanbrambles9372]

Hey guys I got a Kawasaki KLF 300 either 2005 2006 or 2007 dose anyone know where the vin number would be

[@scott2851]

after taking off the timing chain cover i put it back on and now i’m confused cause i have a 3 way connector and don’t know where to connect it can anyone help?

[@scott2851]

plus there’s two yellowish clear hoses on my carb do i connect both of those to the timing chain cover?

[@erichiles9568]

What does rectafire look lik

[@imthedudemane]

Manwhwres this been