Four questions for you. Did you remove the sway bars to get this flex? Also, did you move the rear bumper up an inch to match the one inch bed lift? Are there different settings for stock A arms, vs the arched Super ATV A arms? I will be eventually be upgrading my A-Arms, but wanted to see if it should all be done at once. Who do I call and ask for to get pricing on a set of Stage 1 shocks for a 2021 Teryx 4. Thanks and great video!
@HesterEdition3 жыл бұрын
In order. Yes toss it in the garage. No No, arms do not change shock setting on that set up. Can add arms down the road. Only need to do the bed lift with 28"-30" tire size. If you want to run 32s will need the 4" bed lift. Can give us a call Tuesday-Saurdays (575) 445-3558
@trialnterror2 жыл бұрын
What’s the cost of the shocks for this setup if I installed all 4 on a teryx 4 2014 ( I have this same machine)
@HesterEdition2 жыл бұрын
Sorry for delays, we don't get every question update. Give us a call Tuesday-Saturdays (575) 445-3558 for current pricing and availability.
@bosse6414 жыл бұрын
Awesome. Such a cool ride.
@HesterEdition4 жыл бұрын
Thank you, these crawler builds are wicked up in the mountains
@Dtay144 жыл бұрын
Wow John! That’s freakin awesome! Too bad I just installed the SuperATV lift kit on my 2020 Teryx 4. I would LOVE to get a set of the stage 1 Hester edition Elkas, but combining those WITH the lift kit?? My tie rods and ball joints would probably HATE me. Might have to delete my lift kit to get a better riding teryx with ELKA! Thanks for the video John!
@HesterEdition4 жыл бұрын
Yes our shock are a suspension lift so you would remove the lift kit and sell it.
@tonymondragon9165 Жыл бұрын
How much would it cost on my 2020 le teryx 4
@DN4AGDX3 жыл бұрын
I like the way you setup all you teryx builds. I've noticed you have used few different brand shocks like the 814s , bandits and these Elkas. The teryx4 you built with the 814s seem to have some travel as well. So what do you think of the 3 brands you,'ve used so far? Any one shock better at certain riding like for rock crawling, trail riding or fast fire road driving.
@HesterEdition3 жыл бұрын
We partnered with Elka to build OUR Hester Edition set ups exclusively, we wanted to build the absolute BEST quality and the most options we could. They are the best of everything, and in some stages the best priced too! Win win!
@DN4AGDX3 жыл бұрын
@@HesterEdition no limit straps needed with Elka's like on the 814's. Interesting?
@HesterEdition3 жыл бұрын
@@DN4AGDX correct, because unlike the 814s these are purpose built to the correct specs for each specific vehicle. The 814s are viking car shocks not built for these vehicles, they are much to long and you MUST use limit straps to squish to the proper lengths or you will damage steering and axles. We do recommend limit straps on any brand of shocks for racing as a "what if" device, and when running portals and big heavy tires. There is a HUGE difference between the build, material and quality between the 2 shocks in comparison.
@DN4AGDX3 жыл бұрын
@@HesterEdition Right on. I built my Teryx4 just like the one you built with the 814s. I'm waiting to see what Kawasaki is going to release in January. Hoping for a 1000cc Teryx4 or Mule. Maybe a 4 seater KRX. Thanks for showing all the builds. :)
@HesterEdition3 жыл бұрын
@@DN4AGDX We are sure hoping and praying too! But knowing how conservative Kawi is, probably new color or new body haha. I have been giving Kawi design changes for years, let's see if they listened!
@steerheadcattle4 жыл бұрын
I purchased mine in alb! I’m so disappointed in my purchase! It felt like it had plenty of power on flat ground when I test drove it! Took it straight to Red River and with 4 people in it on up hill on maintained dirt roads we couldn’t get it to go over 22mph! The ride to Cabresto lake was sad! Some areas on the dirt road petal to the floor we were barley hanging in at 13mph!!!! Anything I can to to this to boost power would be heaven sent!
@steerheadcattle4 жыл бұрын
Sorry I’m talking about the Mule pro fxt
@HesterEdition4 жыл бұрын
The pro FXT when riding offroad use low range climbing hills. Low rancg for sustained speeds 20 or slower and high range for higher speeds like on roads. CVTs chage ratios based on loads so as you climb hills it technically shifts down in ratio thusly will NOT be able to do 45mph up steeper hills or loaded with people. Put in low range and it will crawl up pretty much anything you point at.
@SuperReddog174 жыл бұрын
good job that's impressive.
@HesterEdition4 жыл бұрын
Thank you
@johncooper64702 жыл бұрын
I would like this set up for my 2017 teryx
@HesterEdition2 жыл бұрын
Get with us, Tuesday-Saturdays, we can help get you all set up!
@johncooper64702 жыл бұрын
hi what kit would this be an price for that kit
@HesterEdition2 жыл бұрын
@John Cooper we have many options, give us a call we will go through and get you what you need for what you want to accomplish 😁👍
@DirtRoadLife13 жыл бұрын
Hi, can you provide a link to the part numbers or how to order these specific shocks for my 2019 teryx?
@HesterEdition3 жыл бұрын
Call Tuesday-Saturdays (575) 445-3558, exclusive through us, one of us will get you all set up. Thank you
@DirtRoadLife13 жыл бұрын
@@HesterEdition perfect! Will give you a call tomorrow. Thanks a lot for the quick response.
@HesterEdition3 жыл бұрын
@@DirtRoadLife1 Your welcome, and Thank you
@mikespriggs3643 жыл бұрын
What are the mud flaps on this build?
@HesterEdition3 жыл бұрын
Mud Buster +3"
@mikehill70114 жыл бұрын
what makes these shocks exclusive to you? doesn't elka sell them on the Web?
@HesterEdition4 жыл бұрын
Yes Elka sells shocks. But they only sell stock length and stage 3 or higher. We have exclusive lengths, stroke, valving and we have 5 stages.
@mikehill70114 жыл бұрын
@@HesterEdition ok, I get it! I'm ready to get them fir my 2015 pro fxt. I only have 150 miles since new and when I do ride, it's got 4 to 6 people and an ice chest and rocky and logged out roads in the Arkansas Ouachita mountains.
@HesterEdition4 жыл бұрын
@@mikehill7011 Get with us and we can get some built and headed your way, they are a bit behind because of the Virus but well worth the wait!
@mikelopez13934 жыл бұрын
Beautiful..
@HesterEdition4 жыл бұрын
Thank you, quite the transformation.
@stormtrooper82423 жыл бұрын
Do they work on a teryx 4 without a arms?
@HesterEdition3 жыл бұрын
Yes stock or arched arms. You need the arched offset arms to fit 30's though. Without arms biggest you can fit is 28" tires and still do the bed lift.
@ryanrose65904 жыл бұрын
Also, can you share what the track width of this particular Teryx is? Thanks!
@HesterEdition4 жыл бұрын
Outside width is 64"
@HesterEdition4 жыл бұрын
Sorry correction this one was 66" it has 2" spacers. It's easy to keep it narrow if needed depending on wheel offset and with or without spacers.
@ryanrose65904 жыл бұрын
Any chance you can have this owner send you a video of these shocks in action?
@@ert911c give us a call we can set that up, there are MANY factors in it depending on how you want it. ask for John (575) 445-3558
@HesterEdition4 жыл бұрын
Cody Give us a call, many factors that go into set ups and a change here or there can affect price depending on your wants. (575) 445-3558 ask for John
@javierarchuleta88744 жыл бұрын
Looks like a badass build, but it is unfortunate you posted a number and say to call and a lady answers at number listed but cannot answer any questions and just says she doesn't know but that new ones are coming in.
@HesterEdition4 жыл бұрын
We go have new employees and are astronomically busy, can leave a message and we can get back with you. Technical questions John answeres and is super busy, if you wish to buy Connie can also get you set up. The shocks are built to spec for each person, we only stock some for builds we do here. Feel free to leave a message and will will put you in line with the many others wanting shocks now and we will get back to you. Thank you