kawasaki tg33 trimmer carburetor rebuild

[@lrayvick]

I just inherited a TD33. It is in very good condition considering its age. Two obvious differences to yours are 1. mine has an in-line primer pump and 2. the ignition ground wire exits the housing just above the muffler. I replaced the primer bulb and it now starts very easily and runs well. Takes a couple of pumps of the bulb and a couple of pumps of the tickler to get fuel from the over flow line. Starts better than any of my much newer Craftsman, Ryobi, etc. But I could only kill it using full choke. Turned out the run/stop switch was improperly connected. Fixed that and all is well. Only other problem is the unit is pretty heavy - I think I read about 13 pounds which is at least 2 pounds heavier that modern wackers. Thanks for your video. Other than some in Vietnamese is it the most recent one I could find on the 33.

[@kennyrogers3919]

I have a TD24 and I took it in to have the carb rebuilt and I know they were just trying to get me to buy a new weed eater but I wasn’t having it! The guy said “oh that’s too old I can’t fix it” so I bought the rebuild kit and had it running in about an hour. It’s a commercial grade weed eater, I used for my business for about a year and then it sat in my garage for like 20 years. I’m not tossing it in the trash! I’ve been using it for a few years since.👍🏻

[@smallengineguys]

Yeah im the only one in south florida that works on them

[@49er16]

Any idea why the carb won't suck fuel from the tank? I've replaced the primer bulb, fuel filter and fuel line as well as rebuilt the carb after cleaning it. Also, what is the function of that lever and fork at the bottom of the carb? I've never used a machine with one and don't understand it use or function and can't find a manual anywhere online. Thanks for any help I'm really frustrated.

[@bejoe6]

What were the beginning settings for the carburetor jets?

[@smallengineguys]

1 FULL TURN

[@jeffreyford3060]

Hi I have the TG24 also had to go onto EBAY to get a gasket kit. was told that the don't make them any more.

[@smallengineguys]

they dont. an old setup. to bad these were very strong.

[@jeffreyford3060]

@@smallengineguys yes .ine i got from work never had a service since only stopped recently

[@49er16]

Any idea what the carb kit part number is? The link is down. Thanks.

[@smallengineguys]

amzn.to/3QW3SlS

[@49er16]

@@smallengineguys Thanks!!

[@kennyrogers3919]

I was gonna say good luck replacing that carb 😂😂😂 It sucks because those are really good weed eaters! I have one I bought new in 1991 for commercial landscaping and it still runs awesome but I had to rebuild the carburetor

[@HM.Hatchet205]

Hiya do you no the carb settings

[@smallengineguys]

1 full turn counter clockwise from snug tight to start

[@Cactusj95]

Do you have any parts for the TG28

[@smallengineguys]

if it is anything like this i got the whole thing just like this but doesnt have spark.

[@romiteshchand3688]

Hi u got any engine for TG33 Kawasaki

[@smallengineguys]

Yes i do.

[@narindershergill3105]

Hi I have a kawasaki tj27,but the cord is hard to pull,sometimes jerks any solutions please?

[@smallengineguys]

to much fuel. its flooding. liquid doesnt compress as easy as vapor

[@iond312]

Vreau si eu un TG 24