Kayak Light DIY NAV LIGHT( Very bright!!! ,,,,,Very Legal )

Kayak light DIY Nav light Tried and tested I've made many kayak lights like this 1 using a led brake light that go's on a car . this light is legal by coastguard standards which says it must be visible 2 nautical miles. the cost is 10 to 12 dollars the point is being safe thanks for watching and subscribe for more great DIYs
For Fishin N Stuff gear please visit link.below
if your looking for something not listed , leave a message
www.etsy.com/s...

[@FishinNStuff]

Here's an update to this light you might be it's alot better and the Curtis alot nicer . Plus I improved on some ideas 💡 kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@fivetwentyseven8598]

Hey you a bait horn buddy. Hook it up to the same batt. Safe your life someday

[@justdadit5894]

Just finished making this about an hour ago. Great idea. Hoping to test it out this weekend. You Sir, are a genius. My son and I watch your videos regularly. He loves the talking lures but his favorite is the zombie. Keep up the good work. God bless. Merry Christmas.

[@FishinNStuff]

Thank you Sir and thank your son for me . I hope you and yours have a wonderful Christmas

[@ricker76er]

I'm not sure if you used marine grade wiring or not (if you mentioned it I missed it), but that is probably something to consider. It would be a shame if all that work ended up failing out on the lake at night. I realize this won't be in the water, but most wiring shouldn't be in the water either. Marine grade wire is comprised of strand copper that is tin coated.

[@FishinNStuff]

That's not a bad idea at all . I didn't really think about that . But ive made so many of those lights I never get to keep one for too long lol . Plus I enjoy night fishing on my Bissau as well just depends on what body of water I'm fishing

[@larryhockley879]

I borrowed this idea and made my own. Better than some of the real expensive stuff we have down here in Australia. Thanks for posting, and keep the ideas coming.

[@FishinNStuff]

Thank you for watching mate and for commenting and letting me know you like it , I really appreciate it . Hey just asking , have you watched both my Nav light videos , I'm just checking because I got 2 of em ones simpler than the other but both are great

[@FishinNStuff]

Here the link kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@HoustonR6ryda]

thank you...made one ,total cost around $5 had an LED in the junk drawer from ebay and some old speaker wire hose clamped it on the inside of my milk crate rock solid and bright.

[@FishinNStuff]

Nick Henton yes Sir your welcome I've made several nav light this is one of the easiest and best ive used I'm glad it help brother , I'm about to do a couple more kayak DIYs soon that are also kool ones thank you for watching my friend

[@HoustonR6ryda]

subbed ..stay safe and keep the good content

[@FishinNStuff]

Nick Henton thank you brother you stay safe out there

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@parkinlotpimpin89]

Solid easy fix to something that would have cost a fortune to buy from a company. Good work man!

[@FishinNStuff]

parkinlotpimpin89 thanks I appreciate that buddy , I come up with that a few years ago and figured it might help some ppl ive got some more ideas ive done in the past i'l be posting soon thanks for watching

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@jonathanoasis]

Great light design. Higher is better. Safety first, live to have fun the next day.

[@RadReelingFishing]

So you put the negative wire on the bottom and the positive on the side of the bulb?

[@FishinNStuff]

That sounds right , but I'l be honest the way most LED brake lights work is . If you hook it up one way, the tail lights work and if you reverse it the brake light comes on . Which is just more leds . Most the time since lights can be didnt , I just hook my wires to the battery and touch the light then switch em . That easy you can see which easy is better .

[@RadReelingFishing]

@@FishinNStuff Thanks, I just watched your other video with the strip lighting, excellent stuff. New follower here. Keep the videos coming.

[@malcolmsmith2590]

I made your kayak navlight and it turned out awesome. Thanks for a great idea. Some of my friends saw it now they want one. Keep it up enjoy the humor also. Mack

[@FishinNStuff]

Thank you Sir , don't forget to point your friends in the direction of the channel. It's a great community we have and you and your friends will just make it better

[@chucksmith5002]

I would have went one step further and put a rubber plug , boot , cap what ever you call them on the bottom of the light pole . Looks good have to make me a couple of them .

[@robcaponesoutdooradventure8286]

Well done and we have them dang noseums down here that will follow a regular light but LED is 100% better for sure , Another great DIY video !!

[@FishinNStuff]

Robert Agri Chillin' Outdoors thanks brother I appreciate that

[@donnierodriguez4442]

I just made one of these light. I like it!! But...I think I am going to redo it. Using a on/off/on (mini/micro) toggle switch to switch from high to low to off so, I can dim the light while I am anchored and fishing then flip it to high when moving or whenever I need bright light. Just need to get a switch and figure out how to attach the switch. I have a couple ideas already.

[@FishinNStuff]

I already have a video about how to install a switch lol . I made a much better version of that light last year , don't get me wrong I like the original version too . Its so simple its hard not to like it but any way check this video out , I already figured out how to make it work really easily kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@donnierodriguez4442]

@@FishinNStuff Well, I'll be! Now, I have to get LED strips and a switch. 🤣 I did have a on/off/on switch and hooked up the 2nd bulb to make a high beam and low beam nav light. It worked just need to get some pipe now!

[@FishinNStuff]

You could run 2 switches one for both lights

[@donnierodriguez4442]

@@FishinNStuff True. Use a 4 way vs a T...🤔

[@FishinNStuff]

Good idea

[@lbeuter]

Hey I just made one and it turned out great. Thanks for the video and for saving me some coin. Appreciate it!

[@FishinNStuff]

That's great brother , send me a picture of on my Email in my about section of you get a chance I'd love to see it man

[@myadventureoutdoors]

Whaa...whoa....wait. we don't need those nipples, we'll grind em off? WTH, I almost spit coffee on the screen. We always need nipples man! I'm very impressed with that awesome light. Outstanding DIY project.

[@FishinNStuff]

Adventure Outdoors you so funny I guess I could have said that diffrent huh lolol , I no matter in front of the camera like you for sue just trying to warm up to it , but I do love making stuff thanks for watching buddy it's very encouraging

[@chadjohnson5137]

If you cut the pipe and put a 3 way t to connect them you could add additional bulbs in different directions.Great video thank you

[@FishinNStuff]

CHAD JOHNSON hey thanks for watching and the comment Chad I've made 1 with a nav light on top and a light under it that had a switch you could cut it off and on with , and I was thinking about making a new video about it . Stay tuned brother or subscribe I'm going to make it soon I just want sure if ppl would watch nav light videos in the winter . Would you? What's your thoughts on that idea

[@chadjohnson5137]

@@FishinNStuff I'm definitely wanting one that throws out as much light as possible.But I want to make it where the I'm not getting blinded so angling it in the right directions is a must.

[@FishinNStuff]

The one on the video is very bright, it only blinds the ppl behind you lol . Since your looking away from it

[@chadjohnson5137]

@@FishinNStuff I see didn't think about that.Most of the time I'm the only one on the river at night most boats won't run that far up to rocky.

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@WesLovelace]

Great lookin' DIY @ a fraction of the cost. LED's are the only way 2 go when it comes to Navigation.....Got em on both boats!!

[@FishinNStuff]

Wes Lovelace thank you Sir I agree with you lol plus less battery drain

[@MacquarieRidge]

Pretty much if a product is marketed for kayaks its garunteed to cost way too much. I always make my own kayak accessories.

[@FishinNStuff]

I agree with you 100% brother

[@FishinNStuff]

_Riot hey check back by im working in some cool DIYs and im going ti be doing some more kayak ones as well , if your subscribed click the bell so you'll know , I appreciate you watching brother

[@MacquarieRidge]

@@FishinNStuff Cool. I definitely will!

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@Trojwaterman]

Nice job. You can get little flashing lights that divers use they are cheap they will get you noticed are waterproof and good to carry on you if you end up in the water as well

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@greghupka2989]

Just finished mine up. Lots of boat traffic where I'm at near Annapolis. Thanks for sharing

[@FishinNStuff]

Cool deal brother send me a picture of it i'l put it on utube my email is [e-mail]

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@heathschwab]

So are they just a bulb that goes in your truck to see inside or is that a tail light bulb. But that's bright. Ide like to make 2 or 4 of them to have fishing camping or even if I'm doing something in the yard at night. Very cool man thanks. God bless

[@yakmasterkayak]

Just a heads up the Yakattack visipole. Is not legal in reference to 2 nautical miles. You don’t need one on a kayak

[@FishinNStuff]

I can't say for sure . But your right about the 2 miles . The reason I'm not sure is because alot of the nav lights on boat aren't very bright in my opinion . But this DIY nav light is 4 x brighter than the one that came on my boat

[@yakmasterkayak]

@@FishinNStuff you can never be to bright lol.

[@reinaldomoll]

Awesome video, just made one and it came out great! The only thing I didn’t like my first time out, is that the light pole sways back and forth. Wondering if it’s because I have the stock plastic Old Town gear tracks, or maybe the pole’s too long? Maybe an aluminum gear trac would solve this?

[@TheOutriderJ]

I was changing my break lights and had a similar idea. Thanks for the video. Great DIY.

[@FishinNStuff]

TheOutriderJ lol it was a great idea lol , I just needed something I could trust more than a flashlight lol

[@FishinNStuff]

Brake

[@TheOutriderJ]

Yes, broken brake lights :)

[@FishinNStuff]

Grammar police , dang I thought my wife was here hehe

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@TheReelFishermen]

Very good. The guy at beginning 😆😁

[@FishinNStuff]

NuSkool Fishing yeah I know right

[@howardberger1942]

Nice light. Maybe connect a toggle switch inline so you can turn it on and off without going in the box and connecting the wire to the battery

[@FishinNStuff]

Ive made one with an extra light for more light with a toggle switch , I was thinking about doing a video on it , but that light doesn't need a toggle switch , by law you can't be on the water without a 360 deg light on , the other light like you're talking about is nice too. I'll be doing that video soon

[@FishinNStuff]

Im sitting on a planner board video right now

[@FishinNStuff]

Im working on a video now that you might like

[@FishinNStuff]

Ol its another nav light

[@FishinNStuff]

I'm working on a video now of another light I made in the past that has a toggle switch so stay tuned buddy

[@greenpea9412]

Man this is flipping perfect. This is a great idea and awesome build. I bought some some high vis led bumper lights that were on three foot strips with connectors at each end and the backing is that sticky shit. They are what I was going to maybe use inside the yak somewhere to give me good floor light in front of me when I hit a switch. That bad boy you got there would light everything around the kayak. I'm going to make one of those for sure. I was just about to pull the trigger on a flag light. I will add a orange flag under the light for day time visibility. A foot or two higher may still give good light but also keep the bugs much higher. This Winter is going to be fun becasue I am going to pimp out a new Old Town 136 AutoPilot. Informative video's like this one have me all wound up for my Winter build.

[@FishinNStuff]

I'm not sure if you watched my other nav light video. But it's an upgraded version of this one , and it's a newer video than that one

[@greenpea9412]

@@FishinNStuff Yep I just watched it and that is another bad ass video right there too. You got all sorts of good stuff on here. I'm going to buy one of those Old Town 136 Autopilot kayaks this Winter. That will be my first kayak so I'm looking at what all you can do to make a killer yak.

[@FishinNStuff]

@@greenpea9412 you'll like that kayak and you'll like the light on it I promise. It works really good

[@greenpea9412]

@@FishinNStuff I can't wait. My boy is coming home from the Marines in the Spring and we are both getting kayaks for fishing. I believe my other two boys will as well so I'm pretty excited.

[@FishinNStuff]

@@greenpea9412 that sounds like fun for sure . I got to warn ya though it's a gateway drug to a boat haha

[@josekanucee1428]

I kayak and people ask if I am afraid of sharks. Nope.... boats. Your intro proved my fear.

[@FishinNStuff]

Hey watch my newer NAV light video you'll like it

[@josekanucee1428]

@@FishinNStuff Yep. I did. Good ideas you have.

[@danmcalinden8728]

If you heated the pvc tube before inserting the bulb , would it make a better fit instead Of gluing it into situ ?

[@FishinNStuff]

I did my new version that way. You should watch it . I upgraded a few things on it

[@biracialbabes]

Awesome thanks for making this video. I'm gonna try it

[@peoriaos6627]

Great video as usual. If possible, it would be nice to see some gadgets that fit on the bass tracker versatrack system. Stuff like cutting boards, rod holders, and even many plastic tackle box holders... Like those little white things. The versatrack system uses quarter inch carriage bolts to connect to. And they connect on the side as opposed to the top of the gunel. I think they could have thunk it out better but it is what it is

[@FishinNStuff]

Thank you , I don't have a Tracker anymore but I still have a track system on my new boat and I have fine some already . They are in some of the hack videos

[@peoriaos6627]

@@FishinNStuff Will check them out

[@sevensurvival]

Good idea, jamming music. Well done. Respect

[@crappiesniper]

WOW!!!!! 🔥That is AWESOME!!! 🔥Man you are going to go viral off of one of these videos I promise man!!! This is good stuff!!! 🏆

[@FishinNStuff]

Crappie Sniper thanks brother I try to improve every video but it'll still take years to get good as you brother

[@jacksonl.2632]

What i have always done for daytime fishing was using one of those orange construction flags so that way i would be seen during the day great idea was wondering what was the cost to build it

[@FishinNStuff]

Guessing I would say 12 bucks and thank you by the way , I have another nav light video i like better i'l get you the link

[@FishinNStuff]

Watch this one before you build that one lol kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@EatnLunch]

I like it. I really want a big tall light on my rig for night fishing, but the bugs here during the summer are SO bad. Haven’t solved that problem yet. Also, that little “listen” voice in the intro music? That’s from one of my favorite video games from the 90s, Legend if Zelda: Ocarina is Time. Kills me every time.

[@FishinNStuff]

EatnLunch Fishing it didn't attract bugs the first one I made did that I gave away ,

[@FishinNStuff]

EatnLunch Fishing I played that to the fairy made that sound lol

[@EatnLunch]

Yep. It was Navi the fairy. Good ol’ Navi

[@johnchan6191]

Wow, very cool nav light. Thx 4 sharing on the internet.

[@FishinNStuff]

John Chan you welcome I hope it helps and thanks for watching ive got some more cool kayak DIYs coming

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@johnwhite993]

Can you make some of the fold up wheels for kayaks? They have them by boondock but they are $300+. I know you can make some cheaper

[@FishinNStuff]

I'll look at em . And see

[@SK_CrappieCatching]

Excellent👍👍👍... what's up with those wild boat drivers?

[@FishinNStuff]

SK's CRAPPIE Catchn Adventures I thought it was funny plus I was trying to get the point across safety is more Important than pasting 2 dollars lol

[@FishinNStuff]

There's so many videos on making nav lights from 99 cent solar lights from Wal-Mart you know , thanks for watching always good hearing from you brother

[@olhesty2196]

Awesome man! That's what I'm talking about.

[@meris3515]

Well that sure is an upgrade. Very skillful and educational video. I took some notes 😃

[@FishinNStuff]

Lyndon M. ATX Fishin thanks brother I appreciate the thoughtful comment

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@northwestyakker5330]

Subbed! Best diy light I've seen yet. Gotta find one now.

[@FishinNStuff]

Northwest Yakker thanks man I appreciate that, really does work great . I appreciate you watching as too

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@richdunn9774]

Didn’t you solder them to the light opposite in your other video? Red to the bottom two and black on the side? Or does it not matter?

[@FishinNStuff]

It doesn't matter I determine which way to hook it too the battery by hooking it up . , one way the tail light only will work , the other way the tail light and brake light will work and that's the easy you hook it to the battery . It works both ways

[@RokinDaCazbah]

What did you use for the re-chargeable battery pack?

[@bigrigbassin3772]

How long does the small battery last on a full charge running the tail light and an occasional switch on for the other light? (thank in advance) Great channel!

[@FishinNStuff]

I've never did a bunch of tests , but I've ran those batteries 6 hours on just a nav light and it still had juice left , I've also went on 2 fishing trips during the day time running a helix 7 , before charging it and it never went dead . You can buy those batteries worth different amp hours I'm running a 7amh , you should watch this video Its a better nav light I made not to long ago kzbin.info/www/bejne/bGGmgGewbKpgb6M

[@shinnosuke150]

Aloha, quick question, looking at the LED light on Amazon, it says there is a dim mode and a bright mode- how do you solder it up so it just stays on the bright mode? Or am I over-thinking this haha...

[@JustinsFishinFetish]

Awesome! I'm going to make one for the kayak and the boat.

[@FishinNStuff]

Justin's Fishin Fetish well that really is an awesome nav light , I'm not saying it because I made it but I've made 6 of em lol, simply because they really do work so well , my friends asked a lot so I made a DIY video so they could make there own haha

[@precisionanglingYT]

Well done! Going to be working on something similar soon!

[@FishinNStuff]

Precision Angling thanks man I'll check it out, thanks for watching

[@precisionanglingYT]

Fishin N Stuff just curios..did you put a cover/lens over your DIY light. Sorry if I missed it.

[@FishinNStuff]

No Sir I'm just careful with it but you could

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@miltonnelson1916]

Great Video. Thanks for sharing I will be adding this to my Kayak for night fishing. Super Kool setup !!!!!

[@FishinNStuff]

Consider subscribing I've got some cool kayak DIYs I'm making soon , and I was thinking about making another kayak nav light that my friend uses I made him , either way I appreciate you watching and thank you for commenting I like knowing what ppl think

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@waterboybb]

This video was extremely edifying! I am wondering what was the name or type of cover you place on top of it at the end? I just ordered my first kayak last week and I'm totally into rigging this DIY job. Thanks!

[@FishinNStuff]

Thank you Sir I appreciate that ex very much , I too love to make and do my own rigging , I didn't use a cover at all almost all LED lights are water proof but I never tested that one , I'm not normally night fishing if it's going to rain , I do have a fix you could do if your interested , you can buy the larger pack of epoxy from harbor freight I think it's 3 dollars , mix it up in a disposable cup , then dip your light into it that should protect it plenty good , hey buddy click the bell or just check back by ive got some more kayak DIYs I'm going to do and I think this year im going to make another cool NAV light I've made before soon . Well before spring any way

[@waterboybb]

Fishin N Stuff thanks again!

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@casualcarolinafishing5835]

That's pretty slick! Definitely looks bright!

[@FishinNStuff]

Casual Carolina Fishing yeah you need to try some night time fishing that's when the best cstfishing takes place the majority of the time

[@casualcarolinafishing5835]

I may try some night fishing this year, but I doubt it'll be from the kayak.

[@BDoutside1101]

Could you explain how where to attach the red black wires where you did on the bulb so that it works please.

[@FishinNStuff]

Watch this video . Its better , maybe it'll be easier to understand . Its newer. The only real difference is I put an extra brighter light on it as well kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@Vincentdonnelly5158]

Your an undiscovered genius

[@FishinNStuff]

Vincent Donnelly I wouldn't go that far but thank you lol

[@justinturtle2558]

Soldering the light with 2 promgs on bottom do i solder negative to both and positive to the nipple on side?

[@FishinNStuff]

Yep you got it . One wire on the bottom one on the side . Neg and positive don't matter because it'll work both ways one way will make the light work and the other will make the brake light work which is brighter , just switch en at the battery to fix em

[@FishinNStuff]

I hope that helps if not let me know buddy . Hey check back by or click the bell I'm making another light soon that's an upgrade of this . It's brighter and works great ive made it before I was waiting closer to spring it's coming soon

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@codybieker4924]

Couldn't figure out why the hell my light wouldn't work, then u watched your other video and seen that you had the red and black wires switched around.

[@FishinNStuff]

It did work either way , 1 way will make the tail light work and the other way will make the brake light work , ones brighter than the other

[@hikewadepaddle]

Great video! Just subscribed. Go night fishing a lot and always look for improvements to my kayak!

[@FishinNStuff]

Phillip McCutchen thank you Sir , and thanks for subscribing , I've got another cool diy kayak video im making soon and I haven't seen it on utube I think you like it too if you love night fishing like me

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@gsolha1265]

Very nice video Your video is interesting and brilliant I really enjoyed watching it Have a happy time friendly greetings solha

[@FishinNStuff]

G애솔하 thanks my friend

[@ZoePzzie]

👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼 Thank you so much. Life saving video 😁

[@lindafromidaho2932]

Well done!

[@FishinNStuff]

Thank you Linda , hey I made an updated Nav light like that one voor better you should check it out you'll like it better I'm sure kzbin.info/www/bejne/g6ndZ6qJiqeBaaM That's the link to it

[@jkkofishing8738]

very good tutorial

[@FishinNStuff]

Thank you very much ive got a newer nav light video that's even better than this video you should check out . I appreciate you watching and commenting

[@Inpreesme]

Thank you

[@WalkerOutdoors]

Nice job I might do one just like that for my canoe

[@FishinNStuff]

Walker Outdoors our really is a good nav light me and my friends have used em all lot

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@RealChoice1776]

Awesome thx 🙏 great info

[@anthonycummings6000]

What kind of battery is that, little motorcycle battery or something also about how long does it last with use?

[@FishinNStuff]

I use a deepcycle 12v like 7mah battery they are around 20 bucks on Amazon I saw some at walmart in the deer hunting section last weekend for 22 dollars they are deep cycle SK you can run em dead like a boat battery and I dont know how long they last because it's never when completely dead on me I use it for my 7" humming bird and I've used it 2 trips maybe 8 or 9 hours and it didn't go dead , hope that helped

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@ranal7935]

i have been thinking about a light for my catfish juggin boat...i am thinking of trying to find a whip-type antenna , so that i can bend it over and bungee it at the end , for when i have to go under limbs and stuff..........as usual , i only think about it when i see videos like this one.....it sure looks good there by the dock.........thanks.

[@FishinNStuff]

re lee you could attack a short piece of pvc to the top of the antenna to hold the led light then wrap the wires around it down to the battery , that led brake light works amazingly well no matter how you make the pole , hey thank you for watching brother I'm sitting on some more kayak diyssoon just a little behind on a few other projects , if you like the nav light the others I'm working on are just as original so check back for em or click the bell so you'll be noticed

[@ranal7935]

thanks FNS , you have some great ideas...i have just found your channel and have only watched a couple of videos so far , but i plan on watching a lot more....you are so right in not spending tons of money on stuff you could fabricate yourself from the junkyard and maybe a few high-tech gadgets you have to buy.........great stuff man , i will keep watching , thanks.

[@FishinNStuff]

re lee I hope you do like it I'm improving utubers a lot to learn but I have some great ideas

[@FishinNStuff]

Hey buddy I'm working on a video now of another light I made in the past I think you'll like a lot

[@vinniesdayoff3968]

Fine looking setup Fishin, thank you

[@FishinNStuff]

Thank brother it works for me , thanks for watching and trading the time to comment it means allot coming from a true diy pro like yourself

[@ZillaThe5_0]

what do you have powering the light?

[@massivehorsepower]

Nice idea but how did you waterproof the led bulb?

[@FishinNStuff]

I made an better version of it a couple years ago . It's on my channel. It's much nicer and I figured that out too

[@2zzlift989]

Nice video! Like you song background what the song call..

[@IoannisDiakopoulos]

Very nice video +1thank you👌👌👍👍

[@FishinNStuff]

Ioannis Diakopoulos thank you very much

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@WhatExitStrategy]

Do you have the fish finder and light running off same battery?

[@FishinNStuff]

No I didn't the fish finder battery is mounted in my kayak hatch . The light battery i just put it in my kayak box . I have another kayak light video that explains it better and its a nicer light too

[@WhatExitStrategy]

@@FishinNStuff nice I’ll check it out too! I just finished completing my fish finder install in my small tarpon 100 LOL have a 12v in a waterproof case hooked up to the Garmin, and now looking at lights and I’m like, how am I gonna connect both to same battery.. never ends 😂😂😂

[@FishinNStuff]

@@WhatExitStrategy those LED lights don't draw a lot of power though

[@keepreelin7073]

I am curious as to the wiring on this. In your video it looks as though the black wire is the neg and the red wire is the positive but you but the black wire to the bottom of the bulb, which I would think is hot and then attached the red wire to the side of the which I would think would act as the ground. Can you please explain? Thanks

[@FishinNStuff]

Good question lol it doesn't matter id the answer I only knew that because I've built like 4 of em I forgot to tell about it sorry . The reason it doesn't matter is if you hook it up one way the whole light will work , then if you switch the wires around only half the light works , the reason is because it's a led brake light half the light is the tail light the whole light being on is the brake light . Does that make sense

[@FishinNStuff]

Ol and thank you buddy I'm going to make another nav light video before night fishing starts back with one I've make that had an extra light you can cut off and on for more light , you can't make a really brie one for all the time because of bugs

[@keepreelin7073]

Thank you for your response. I am interested in thus light because we nighttime kayak fish down here on the Texas Coast and per Coast Guard rules we have to have a 360 degree light at all times. So I will be wanting to hook mine up so that it burns the whole bulb. In order to do that then I should just hook it up like yours? I also bought a socket just trying to have an option for replacing the bulb instead of super glue. The socket that I got has 2 black wires, wouldn't you think that those are both hot wires? If so, then would I need a negative wire?

[@FishinNStuff]

Ive never tried a socket because the bulb last 50,000 hours , and you don't have to worry about hooking it up backwards if you hook it up and half the light works just switch your wires around if the door thing works for good

[@chasingrodbenders5961]

Is there a way to connect both the light and fish finder to on battery

[@FishinNStuff]

Yes Sir I use 2 pin connectors on my batteries , nav lights and depth finder , you can buy spitters so you can connect more than one thing at a time . Here a link ti what I'm referring to TEZONG Y Splitter 1 to 2 SAE Power Automotive Extension Cable 2 Pin Quick Connect Disconnect Plug SAE Adapter Connector 18AwG 30cm 12inch Wire for Solar Panel Charge 1Pack www.amazon.com/dp/B07JWH6TJT/ref=cm_sw_r_cp_apa_i_b1XXCbB08H3S9

[@FishinNStuff]

I appreciate you watching and I'm working on some more neat kayak DIYs i'l be posting soon sho clock the bell or stop back by brother

[@nathann794]

What size battery do you use? Would really appriciate a reply, Thanks!

[@FishinNStuff]

I use the small deep cycle batteries , Hobie makes a holder for em as a matter of fact here is a link and you don't have to buy this exact one just one like it www.amazon.com/dp/B003S1RQ2S/ref=cm_sw_r_other_taa_WJAVEbNG9FH1H

[@nathann794]

@@FishinNStuff Thanks for the ideas! made it last week and it works great!

[@bryonrickard4617]

Can you tell us what the brand is on the light?

[@FishinNStuff]

It's on my first Nav light video I showed the package and all , but you can use any LED brake light , Amazon carts a lot of em kzbin.info/www/bejne/bGGmgGewbKpgb6M This is the other video

[@carlosdrane500]

What was the original bulb that you used that you said is too bright that you gave to your friend?

[@FishinNStuff]

It was the same light used for the nav light with another light underneath it , had on/off switch on the pole you could cut it off while not in use because it killed your night vision and the bugs got bad my friend used it on the ground of his kayak he cuts it on top film then cuts it back off I can give you an idea of what it looks like ,,,,it looks like this nav light with this light. kzbin.info/www/bejne/rnOqnpWBfZh3e8U. Mounted underneath and a separate switch to cut it off and on the light was white of course

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@chadschehin7193]

What size pvc did you use and what bulb would you recommend? Something we're won't get stopped by the game wardens but won't attract a swarm of bugs LOL! Thanks!

[@FishinNStuff]

Hey brother , watch this video I made a better one , it's kind of an update to that light and I go into more detail about those questions you asked , after you watch it if you still have questions i'l be glad to help you with anything you need to know about it kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@FishinNStuff]

I hope that help ya , I had a lot of ppl asking questions so I made a new video , plus I made the light better . It's a really awesome light . I appreciate you watching and let me know id I can help you in any way

[@22shoffer]

Pilot Automotive 1157 LED in White. Pep Boys has them. The package I got has a metal housing in it with wires already soldered to the housing, so I just cut the switch off and used the pre-wired housing that at the top of my light build. No nipple grinding or soldering necessary. I did have to hollow out the top the PVC pole with a sanding bit from my Dremel, but that was easy enough.

[@FishinNStuff]

Hey thanks for that info brother , I haven't checked at Pep boys , the one I used at Walmart had that too , but I didn't use it cause ive made about 6 of em , everytime I make one a buddy wants it and I end up making me another one lol

[@22shoffer]

Fishin N Stuff I am not surprised. It’s a very good DIY video, and fantastic idea. I commend you on your brilliance.

[@timhunt2500]

Very nice man.

[@FishinNStuff]

Thank you Sir , I appreciate that . Hey I updated that video with a new version of that light . It's even better here a link kzbin.info/www/bejne/g6ndZ6qJiqeBaaM You'll like it even better , hey click the bell or check back by I've got some more kayak DIYs I'm going to be posting soon

[@slikrik6098]

that was a great DIY LIGHT. new sub

[@FishinNStuff]

SlikRik I really appreciate it my friend

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@lakayyaker9415]

Nice DIY light mate

[@FishinNStuff]

Thank you Sir , I appreciate it and I appreciate you watching too , I've got another DIY navigation light and a kayak fishing light I'll be posting soon so click the bell or check back my friend

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@DolphinDiver808]

Awesome job going to have a go at this one.

[@FishinNStuff]

Clinton Rayner hey you will love it , I've made 5 of em and everyone I've made 1 for had really like it , it's pretty easy if you need any help I'm here my friend

[@FishinNStuff]

Clinton Rayner click the notifications bell because I'm getting really to make a few more very neat kayak light DIYs I bet you haven't seen on utube

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@foxxxy51]

Awesome video man!!! Really good stuff

[@FishinNStuff]

Rip&Tip Outdoors thanks I appreciate that

[@jamesireland9188]

Awesome idea thank you for sharing just subbed

[@FishinNStuff]

James Ireland thanks and thank you for commenting it means allot

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@counttepesh]

Have you got the part # for the brake light you used please?

[@FishinNStuff]

This is one of the LED Lights like I used . I bought mine at Walmart . You should watch my updated version . I made a new video and it was even better . www.amazon.com/dp/B01MY4T4BU/ref=cm_sw_r_apan_glt_i_8QZ5R7TN53D7TS046CX4

[@captainredmanz]

What size pvc did you use. I have the exact same bulbs at home. Making this tonight.

[@FishinNStuff]

it's a led brake light with 15 leds On the pack it says it fits 1157 2057 and 7528 any 12v led light would work I used the biggest I could find for more light but I would use led over a normal bulb for battery life Email me a photo bro I'll post on here , and click the bell because I'm making another video like this for a kayak fishing light idea I have I think it'll be cool

[@FishinNStuff]

The pvc size was 1/2 " I'm pretty sure I alway take the bulb with me because pvc inside Dem change as I've learned lol even pvc and pcvc and the electrical pvc conduit are all diffrent even if they are the same size

[@captainredmanz]

You leave the bulb open to the elements?

[@FishinNStuff]

Marsh Gnat / team shamblez I do but you could cover it

[@FishinNStuff]

Marsh Gnat / team shamblez at 1:45 it shows the exact size of the pvc

[@Sportsman101]

nice DIY!

[@erickpeterman6328]

Could you have put the socket and some sort of cover for the light, to protect it from the environment and for easy bulb replacement.

[@FishinNStuff]

Erick Peterman yes you could but the light has a 50,000 hour life span which I'll never reach and led lights are water proof so it's really unnecessary and the point is to make it affordable as possible you know

[@chrispierce2942]

You could totally smear clear silicone on it if you want to make sure its sealed from the weather

[@FishinNStuff]

Erick Peterman you could but I'm not sure but like 90% of all led lights are water proof I should do a test on mine too see if it is

[@erickpeterman6328]

@@FishinNStuff the reason I asked is, the saltwater and the salt in the air could cause problems for the light. It really seems like a great light.

[@FishinNStuff]

Erick Peterman it is a great light , I was thinking the best way to protect it would be to mix you up some epoxy which you can get at harbor freight pretty cheap and after you make the light dip the whole light end in the epoxy and let it dry , that way it'll be very hard and ultra clear and that should keep it safe from any environment

[@justinturtle2558]

And what light are you using? Walmart didnt have much

[@FishinNStuff]

I think walmart might have stopped carrying them, or just a LED broke light that's all it is , advance or auto zone maybe have em

[@justinturtle2558]

Ahb ok thanks man best idea i have seen yet thanks for the help!

[@FishinNStuff]

Hey buddy I got time to look finally and these lights would work , Amazon has lots of different led auto brake lights that would work. AMAZENAR 2-Pack 1156 BA15S 1141 1003 7506 1073 Extremely Bright White LED Light 9-30V-DC, 2835 33 SMD Replacement Bulbs for Interior RV Camper Tail Back Up Reverse Bulbs Day Running Light www.amazon.com/dp/B07KD4RD7W/ref=cm_sw_r_cp_apa_i_2pwpCbF6JD9EG

[@justinturtle2558]

Thanks for taking the time man i guess il pick up a few to find the brightest 1 lol

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@danmcalinden8728]

Have you a list of the materials …

[@FishinNStuff]

No that's a very old video . But I did make a newer version of that nav light and went into more detail kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@keepitreelcatfishing5883]

How tall does it have to be ?

[@FishinNStuff]

It's only got to be taller than your head while your sitting down , so it can be seen from all sides , I like mine about 5 foot but it's really up too you , before you build this Nav light watch my other Nav light video you might like it better . I appreciate you watching by the way kzbin.info/www/bejne/g6ndZ6qJiqeBaaM That's the Link to the other 1

[@keepitreelcatfishing5883]

Fishin N Stuff thanks . Will be checking it out. I will post to my channel and be sure to give you a shout out when I have it made .

[@themiwoodsman7222]

Great light mod indeed !

[@Thelifeofaflyfisherman]

Awesome video I don’t know if I missed it but how long does the battery last

[@FishinNStuff]

Fly Fishing Ninja well that battery will run my 7" hummingbird 2 fishing trips I've never ran it dead. Not sure about the light , I figure 2 trips or longer I would think the light pulls less than the death finder I've fished all night and it was fine id's a 7 or 8 amp hour battery

[@FishinNStuff]

Fly Fishing Ninja thanks for watching brother

[@Thelifeofaflyfisherman]

Fishin N Stuff Thank you very much for answering my question

[@FishinNStuff]

Fly Fishing Ninja always brother you one of my favorite utubers

[@FishinNStuff]

Fly Fishing Ninja how can you not be with a name that cool lol

[@enthusiasticfisherman1229]

Looks pretty handy! :)

[@FishinNStuff]

Enthusiastic Fisherman yes Sir it is, thanks for watching bro

[@rollinhillstv6861]

where can i find the this LED bulb?

[@FishinNStuff]

There's 100s of em on Amazon, you can pick one out you like . I bought mine from Walmart in the auto section . Here's a link just to give you an example buddy New Generation 1156 1141 1003 33-SMD LED Light bulb Use for RV Indoor Lights, Back Up Reverse Lights, Brake Lights, Tail Lights, Rear Turn Signal Lights (10-Pack, White 6000K-6500K) www.amazon.com/dp/B07JQDVJXD/ref=cm_sw_r_cp_apa_i_wCV7CbZDV1AHQ I appreciate you watching brother , check out some of my other DIYs I'm sitting in a pretty cool kayak box right now

[@FishinNStuff]

You should watch this video before making that nav light , I made it too and it's a really awesome light

[@jamesgarner8668]

What battery have you use

[@FishinNStuff]

newnightrider garner I use a small deep cycle battery, you can find em kn Walmart this time of year they sell em too run the deer feeders, or you can just search kayak batteries on Amazon and they will come up . But you should check out this video before making that light kzbin.info/www/bejne/g6ndZ6qJiqeBaaM It's a better version of that same light , but either Nav light works great

[@jamesgarner8668]

@@FishinNStuff thank you for that but im from Australia so have no i dear what you talking about if you can send a link where you buy them that we great and thank you for your reply love the idear

[@FishinNStuff]

Im sorry mate , my mistake . Here's a link from Amazon of the type battery I is , you'll also need something to charge it with , a cheap charger will work fine . NP12-7Ah 12V 7Ah AGM Rechargeable Maintenance Free Valve Regulated Sealed Lead Acid Battery with F2 Terminal www.amazon.com/dp/B01K6VD0WW/ref=cm_sw_r_cp_apa_i_NecBDb8V5BT5K

[@jamesgarner8668]

Thank you so much for that i found one that in my country. Love your chanel your doing some great easy and cheap work thank you so much

[@justinturtle2558]

What battery are you using? Can you put a link?

[@FishinNStuff]

Something like this ExpertPower 12V 7 Amp EXP1270 Rechargeable Lead Acid Battery www.amazon.com/dp/B003S1RQ2S/ref=cm_sw_r_cp_apa_i_6DfpCb2R8V1C0

[@FishinNStuff]

Justin Turtle check back by or click the bell I'm getting ready to do a new video on the subject I've made some cool improvements to this light

[@justinturtle2558]

Thanks man and on 1 of those it runs a good while?

[@jefferybarron929]

If they don't see your light, if they don't hear the horn, maybe the 45 popping off will get their attention... Just say'n!!!

[@FishinNStuff]

Lol

[@ripnlipstv]

Nice video man!!

[@FishinNStuff]

ripnlips tv thank brother I really appreciate that and I'm sorry I don't know how I missed your comment that dang utube lol

[@696969640]

great

[@FishinNStuff]

Thank you Sir I appreciate that

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@alexandercabrera7355]

Perfect

[@FishinNStuff]

Thank you Sir I think you'll like it , I watched a lot of these nav light video's and just could find one I liked I'm a lil picky . But I came up with this one and it work out so well I ended up make a bunch of friends 1 , so I shared it so they could make theyre own haha

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM

[@raymondbailey1970]

good work i have just ordered a bulb.

[@FishinNStuff]

raymond bailey cool deal you'll love it I promise , I'm getting ready to do a couple more cool kayak DIYs

[@raymondbailey1970]

Awesome check these out for outriggers mate,,,,,,,,,www.ebay.co.uk/itm/Golf-Club-Fit-Cart-Car-Trolley-Pushchairs-Umbrella-Holder-Black-BEST-UK/202275167681?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

[@FishinNStuff]

Those are very cool I've got some but they have ram ball mount bases

[@FishinNStuff]

Scotty Electronics Rocket Launcher Rod Holder No Jacket w/241 Bracket www.amazon.com/dp/B00JHGF6L6/ref=cm_sw_r_cp_apa_i_0fJxBb13CBA84

[@FishinNStuff]

Mine is kind of like this one but it's a ram ball mount

[@thewrongguy]

If I was to make it with a switch so I can turn it on and off, how should I do it?

[@FishinNStuff]

Dawrongguy actually I have done that with the really bright one I referred too on the video I gave it to a friend to use to video with , I wired it so the nav light stayed on and you could cut off the bright light , all you do is run 1 wire from your battery too your light bulb then run the other wire from your battery to the switch then out of the switch to the light bulb , you only need a break in 1 of the wires to make it come on and go off just like a switch in your house if your break the circuit on 1 wire the light gos out just like if you take one wire off the battery. I hope this helps you buddy thanks for watching and you should subscribe I'm working on another cool kayak DIY you will love

[@thewrongguy]

Fishin N Stuff thanks for the info, subbed

[@FishinNStuff]

Dawrongguy I appreciate that and I'm serious you'll like the next kayak DIY

[@FishinNStuff]

Here's a update to this light you might like better kzbin.info/www/bejne/g6ndZ6qJiqeBaaM