They definitely look cool, but they were a little too bright for me when driving at night. I ended up replacing them with incandescent bulbs.
@bradlfsh2 жыл бұрын
Magic eraser on that sticker bit on the back if it's dug into it tho it'll probably need wet sanding
@KCars2 жыл бұрын
I’ll have to look into that, somebody else recommended 3M eraser. I’m assuming that should be pretty similar
@juvalmathew11 ай бұрын
Bro where do you buy these lights? Can you please send link or site ? Thanks
@KCars11 ай бұрын
I believe I got these from advance auto parts or auto zone
@cowycowy24693 жыл бұрын
It’s a Tron Jeep 👍🏼👍🏼
@KCars3 жыл бұрын
💯
@prymalalpha37172 жыл бұрын
does anyone know where i can get a new shifter console the plastic broke on mine and i cannot find anywhere to order a new one
@KCars2 жыл бұрын
I’m not too sure on that one, have you tried rock auto or carparts.com ?
@YoungThrilla13 жыл бұрын
THINGS LIKE THIS SPICE LIFE UP! 🔥🙏🏽🌙🛸👽
@alejomerced212 жыл бұрын
I just got a 95 xj. Doing the instrument cluster and dome light LED. Great video
@KCars2 жыл бұрын
That’ll look good, thanks!
@andrewcheatle46913 ай бұрын
Personally I don't see the advantage super bright auto selector lights brings?! It's just distracting especially at night but hey I'm just an old guy so wtf do I know 😆
@motownXJdad95653 жыл бұрын
keep an eye on your indicators, i installed those same sylvania bulbs in mine a couple years ago and the bulb in the T-case indicator actually got hot enough to start to melt the plastic part with the 2hi, 4hi etc on it.
@KCars3 жыл бұрын
Really? Aren’t LEDs supposed to be low heat? I’ll have to look out for that, thanks!
@motownXJdad95653 жыл бұрын
@@KCars yeah thats what i thought too
@KCars3 жыл бұрын
Interesting
@brawndon78753 жыл бұрын
Have you had any heating problems since installing them?
@KCars3 жыл бұрын
No. I actually switched them back to incandescent bulbs because the LEDs were too bright for me. I haven’t had any heat issues with them
@LorenKyleDiedrich3 жыл бұрын
See you got that acne under control, good job
@officialWWM2 жыл бұрын
Savage 😂
@MajorWeakness3 жыл бұрын
Did the same upgrade but didn't use the "super bright " sylvania, I hope to do the guage cluster, thanks for the video
@KCars3 жыл бұрын
Gauge cluster would definitely look good as well with an upgrade. Thanks for watching!
@nyc_man_united18503 жыл бұрын
Hey do you know where I can get the actually shift indicator and 4WD strips because my bulbs burned into the plastic strip
@KCars3 жыл бұрын
I’m not sure, if you can find one at a junk yard that’s probably your best bet
@albertosotelo99695 ай бұрын
LEDs have a certain polarity ritght? Like you said, one way they don't turn, in that case you just flip them, but when I swapped my shift bulb for an LED elecrical problems started to show... the battery dried out, and for example I also changed the headlights, they are always on, since they use less coltage they "feedback" and they are kept on... do you need to change the relays so this doesn't happen or have you heard or had any problems like mine???
@Gotyoulookingnyc3 жыл бұрын
Use Goof Off, get a rag and wet it and go to town, just make sure you dont rub too hard and take off the clear coat. Or try hot water, like boiling hot.
@KCars3 жыл бұрын
Thanks👌
@anarchistgreg4689 Жыл бұрын
Won't catch me in no automatic
@Ssesshoumaru692 жыл бұрын
I was searching for how to pull out that light socket since the light is dead. I hope. The light died after my 1.5 year old kid, who sat om Mommy lap, accidentally kicked my coffee cup and some coffee went down there... 😱 I think the LED is too bright for driving in complete darkness.... I changed the diode the previous owner had put at the gear changer to an original light bulb. Maybe I find an LED with less lumen. I have all Coupe lights in white LED. It looks amazing. Plus, the LED's doesn't emit heat, have more lumen per watt so they are using very little power.
@KCars2 жыл бұрын
I actually ended up taking the LEDs out and putting in the OEM style bulbs since they were too bright for me as well
@alexisfuentes1300 Жыл бұрын
I got a question does this work on a 1988 jeep Cherokee XJ
@KCars Жыл бұрын
I’m not familiar with that year but I’d assume so
@alexisfuentes1300 Жыл бұрын
@@KCars alright thanks for the feedback I will try my best to find out thorough out the internet
@KCars Жыл бұрын
@@alexisfuentes1300 💪💯
@wishihadavette23927 ай бұрын
The same sylvania 194’s normal led’s are great. They were not too bring at all
@KCars7 ай бұрын
Good to hear, thanks!
@bradlfsh2 жыл бұрын
When you do the bulb on the 4x4 bezel is taking the console out the only way to get to it? Or does it pop out like the transmission one I tried to but I wasn't sure if I was about to break it
@KCars2 жыл бұрын
Yes it pops out like the transmission one, check out the video, I showed how it pops off
@creativeoutlet31482 жыл бұрын
I like to make my cluster and everything else, very dim. It's great for night driving and doesn't destroy your night vision... Just want to make the engine lights dimmable now 🤣
@KCars2 жыл бұрын
Same I keep mine on the most dim setting
@seaton44422 жыл бұрын
Im having issues finding these lights. Would you happen to have a link?
@KCars2 жыл бұрын
These are the ones I used in the video: Sylvania Zevo 194 White T10 W5W Socket LED Super Bright Interior Exterior Vehicle Car Lighting Applications Light Bulb Set (2 Pack) www.amazon.com/dp/B07J516FB4/ref=cm_sw_r_cp_api_i_WRXC453W5YAEGTRB8XJ0
@SlushGamingg2 жыл бұрын
Will these fit the gauge cluster? what size are bulbs if you dont mind is it t15 or t10
@KCars2 жыл бұрын
I haven’t done the gauge cluster so I can’t say for sure. I used 194 bulbs in this video
@SlushGamingg2 жыл бұрын
@@KCars I see
@josiah10442 жыл бұрын
I just got a new center consul but it didn’t come with a gear shifter panel and the four-wheel-drive panel.. Do you No anywhere where I could get some?
@KCars2 жыл бұрын
Junk yard or maybe rock auto
@josiah10442 жыл бұрын
@@KCars thanks man
@KCars2 жыл бұрын
No problem
@cesarpulido48963 жыл бұрын
I used the blue light looks good
@KCars3 жыл бұрын
I’m pretty happy with it, thanks!
@joelclark35572 жыл бұрын
Can you still dim those LED replacements with the dimmer knob?
@KCars2 жыл бұрын
Yes they are still dimmable but they ended up being too bright for me even at the dimmest level. I ended up replacing them with halogens
@tony_ofthe_north6604Ай бұрын
What part # light bulbs did you replace them with? @@KCars
@NBHRaven2 жыл бұрын
The eraser wheel will work perfectly, if you haven’t tried already
@KCars2 жыл бұрын
Thanks. I took a closer look at it and it seems like it’s etched into the paint so I’m worried that if I use the eraser wheel, it might get rid of the adhesive but then I might be left with an indent in the paint
@NBHRaven2 жыл бұрын
@@KCars not necessarily an indent but more like some “ghosting” but that can be made minimal with clay and paint correction! 😎
@KCars2 жыл бұрын
💯
@ricksanchez5892 жыл бұрын
Duluth
@jacknthebox84483 жыл бұрын
Your interior is so clean!
@KCars3 жыл бұрын
Thanks!
@XavierCarpenterMTL3 жыл бұрын
Is it just me or does the mismatched greens don’t look too good... It does bother me a bit They look ok when dim at the lowest but then everything is dim Hehe oh well
@KCars3 жыл бұрын
Do you mean the mismatch between the gear indicator lights and the other lights that aren’t LEDs like where the radio controls are?
@XavierCarpenterMTL3 жыл бұрын
The gears and tcase They’re mismatched from factory
@XavierCarpenterMTL3 жыл бұрын
Your Xj is sweeeet Nicely done sir
@KCars3 жыл бұрын
Hmm interesting, it doesn’t bother me, although I would like to change out all the interior bulbs with LEDs. Thanks!
@Ssesshoumaru692 жыл бұрын
Hint: You don't need to push the tabs. Just pull hard.
@KCars2 жыл бұрын
It’s probably safer to push the tabs just to not risk breaking anything
@Ssesshoumaru692 жыл бұрын
@@KCars There's a bigger risk breaking it by pushing the tabs 🤣 I almost pushed a screwdriver straight through the socket in an attempt to "push the tabs" A wonder it didn't break. It's as durable as the JEEP 🤣
@KCars2 жыл бұрын
Interesting
@patagoniaoverland6148 Жыл бұрын
great video, thanks for your content
@KCars Жыл бұрын
Thanks for watching!
@Lugnut-uv7ff2 жыл бұрын
nice nice
@KCars2 жыл бұрын
Thanks thanks
@bradlfsh2 жыл бұрын
Damn she is clean clean clean. Keep up the videos man I like them they are paced well and done well I hate when someone in a how to video spends 5 minutes talking about nonsense lol
@KCars2 жыл бұрын
Appreciate it, thanks for watching!
@redneckswitwheels2 жыл бұрын
until i watch this video..i never knew there was lights there cause mine never worked
@KCars2 жыл бұрын
I was the same way lol mine didn’t work either
@MrRickChase2 жыл бұрын
I will say the superbrights are nice during an overcast day, but i've regularly had to dim my interior lights come night time. I'm thinking of finding a lower lumen option eventually, as i like the slight color change and general increase in visibility, but the superbrights were definitely excessive for my preference.
@KCars2 жыл бұрын
I ended up replacing them with halogens because they were too bright for me at night as well
@calebshull9210 ай бұрын
is halogen the original? @@KCars
@KCars9 ай бұрын
@@calebshull92 yes
@maggiedonovan3 жыл бұрын
what is the part # for the led's
@KCars3 жыл бұрын
194ZEVOLED-2
@maggiedonovan3 жыл бұрын
@@KCars Thank you
@KCars3 жыл бұрын
No problem
@EigerSummitOffroad3 жыл бұрын
When you lifted the XJ, did you install a transfer case drop kit to keep your drive line as straight as possible? If not, that would be a very large reason for your shaking and shuddering. If you did then the SYE should fix it for you. Doing a transfer case drop kit install prior the SYE would be the best case scenario.
@KCars3 жыл бұрын
No I didn’t do the drop kit. The shaking issue didn’t happen after I got it lifted though, it developed after a few months of the lift kit being installed and I noticed it right after I got it back from the body shop. Is it possible that when the body shop put it up on the lift, something got messed up that could’ve caused that?
@EigerSummitOffroad3 жыл бұрын
@@KCars it's possible. Drop kits are very inexpensive and take very little time to install. I'd do that, drive it for a few days to see if you still get the shuddering. If so, your driveline is healthier regardless and the SYE will more than likely do the trick.
@KCars3 жыл бұрын
Already have the SYE ordered so just waiting on that. I’ve heard Rusty’s is way behind on orders now so who knows how long it’ll be. Appreciate your responses!
@EigerSummitOffroad3 жыл бұрын
@@KCars Hope I was off some assistance! Been driving XJ's since 86. Can't imagine being without one now. It's just a vehicle that isn't duplicated anywhere in the modern market.
@KCars3 жыл бұрын
💯
@ChadStarbux3 жыл бұрын
Dimmable?
@KCars3 жыл бұрын
I would assume that they dim when you turn the headlight switch but I actually haven’t tried that yet