Memory Seats Retrofit BMW e60

[@hussienalshmary]

Man you are a genius this is not any car its BMW and with all this genius you chose to publish your work . THANK YOU FOR THESE SPIRIT .

[@Hancock_nl]

You deserve a bigger audience, Ovi. Truly amazing and excellent content each and every time! I'm loving it.

[@hochungmun]

I've been watching M539 Restorations and now I'm watching your videos too. Very informative with great work too. I have an E66, and your videos are a fantastic help and inspiration to get my tools out. I'm sure you'll have lots more subscribers and viewers. Thanks for the videos, man!

[@andrzejtajchman2372]

man i love ur Productions. 101% content, no bullshitting.

[@MegredyPhotoStudio]

Absolut naucitor nivelul tau de cunostinte ! N-am cuvinte .. Multumesc pentru tot. De altfel, am luat un e60 foarte ieftin, pentru practica :) Imi place sa mesteresc.

[@franciscoacevedoreinoso4758]

You saved my life, i was looking for a vídeo like this one for more than 6 months and i didnt find any information THANK YOU!!!!

[@MOvidiu]

Nice to hear that ! if you think that the info is precious and helped you ,share like...and all the goody stuff :D

[@leduck4250]

@@MOvidiu pour e60 2003? Je trouve dommage que se soit filmer loin on voit pas bien

[@dawiskid187]

Dude if you were here in the United States you wouldn’t have hand to handle the amount of work you would have you’re the definition of a master technician ..

[@indcon]

Este o placere sa ma uit la videoclipurile tale, munca facuta ca la carte, felicitari

[@polakkevin7563]

You left me speechless. I was watching with my mouth open. Sorry. But its insane. You are doing it like a pro. Because you are a pro. Thanks for the video and all the informations.

[@MOvidiu]

Hello! thank you for appreciation and feedback! Don't forget to check my other videos!

[@romflo]

Good job, I will be going from half electrical pre-lci sport seats to LCI comfort seats with heating, cooling and active seat. That will be a lot of wire pulling, also to the airbag module for the head rest. Nice to have some inspiration, keep it up!

[@jesserandall5443]

Hey, I’m looking to do the same thing. How did your swap go ?

[@wotter468]

How did it go?

[@markymark7200]

Magical to watch, way beyond me.

[@Bouregard3]

Great video! I wish I knew all of that 2 years ago, when I installed electrical sport seats from an F48 into a E90 with previously mechanical seats :D

[@Obywatel_RP8P]

Can't wait for another video! Awesome job.

[@Classic_BMW_Restoration]

Awesome !! Keep up the good work!! Great content as always.

[@MOvidiu]

Thanks a ton!

[@gerbryf]

Excellent video, thank you. I added the old style lumbar bag in my brother's lci e61, I still cannot understand why BMW did not include the lumbar in the sport seat, it was allready fully electric! Anyway, later he got some fully featured conforts that were fitted, easy job, all wiring was present. I have comforts to fit in mine, also lci e61, but they need to be connected to pt-can (which is not easily accessible, might need to remove dash!). Also, they are 'very late' but 'pre lci' so some plug wiring will be a bit different but it will be done some time! All part of the fun. Keep up the good work!!

[@kinqturkey38]

You saved my day again, thx for the video.

[@mounirennasri9532]

Good job and good continuation

[@maierazor]

Ești un adevarat meseriaș!

[@MOvidiu]

Thanks ! :)

[@ProCarsOG]

Bravo pt tot ce faci!

[@ebargvaynahskij1090]

Wow, amazing tutorial from a to z!

[@bmwdiy]

Amazing video, you are very talented. Does the car have Logic 7? I think Logic 7 retrofit will be very popular and useful. Also Combox retrofit for E60 would be very helpful so you can have Bluetooth Audio and iPhone USB music.

[@MOvidiu]

Hello! thanks for appreciation ! I will keep in mind your recommendations !

[@ayaks90]

Thanks for the great video it explained allot.Unfortunately there is some steps which wasnt explained. Passenger seat has second ground to the chassis,+12vdc and -12vdc pins was transferred from original yellow plug to the new black plug also in the black plug was added the twisted cables which are for can communication (as far as i understand from you cars equipped with heater seats already has those wires so i have to unplug them from my yellow plug and place them in the black one) so far two switches wires and two added (in my case i have the two wires already) but what are the other two wires for and on which pins i have to install them.. also the soldering process in the glove box was really unclear and i did bot understand anything from there. Which cables was soldered to which cables,also in the module plug on pin number two you added the k bus cable but from which seat and what about the second seat?

[@stun_barakat8745]

Please I need the video for the heated sets I was searching for 3 month for it and can’t find anybody to show me how to wire it you just told that you have done that in other video which one please

[@nurousek123]

Great work. But with all that hassle, why didn’t you put comfort seats? Like with massage, heating and ventilation!

[@tonittaja123]

hi. where i find seat wiring diagram?

[@neonance]

Hey, where can I find wiring diagram I had semi electric seats on e60 2004 525i 2.5 gasoline 192hp. Currently have installed comfort seats, heating works but not moving…

[@MOvidiu]

Hello! you can find the wiring diagram in BMW WDS and also in istaD!

[@GeorgeAusters]

Good video man!

[@HumbertoCortes]

Great video, very talented for sure! Can you shine some light my way please. I have a pre LCI E60 with sports memory non heated seats. I am replacing them with LCI E60 sport memory seats + heated.. I thought I could just plug and play but 1 connector on the driver side is different and my seats are not powering on. What all do I need to do or replace?

[@citruknibum6410]

Pre LCI can not fit LCI seats

[@citruknibum6410]

Do you have any video how to retrofit from semi-automatic seat to comfort seat for E60 pre-Facelift. I don't know which pins need to be used and where to tap in. Is it possible to get in contact with you please?

[@torpalee]

Hey I did the wiring correct, coding work because it’s responding , I can move the seat with program but not with buttons on the seat nether of driver/passenger seats work. the buttons that control the windows by the door have also stopped working,,,, what did I do wrong? I had half electric seat before retrofit .. I didn’t have the plug who is memory before

[@AldophinaUanenunua]

I'm trying to convert e60 half powered seats to fully powered seats need your help

[@jacekstajuda2294]

Hi will it be similar job to change seats but on X5 E70 ? Thank you for grate videos, they helped me a lot

[@MOvidiu]

Hello, yes it is something similar 😀

[@static2101]

I wish u was in the uk to do my car . Great job

[@oortony]

hi i have been watching your videos they are great stuff on my pre lci e61 im trying to go from full electric seats to part electric heated seats the opposite way from the normal retrofits i have the seats working but not the heat part i need help with the wiring but struggling to find the information on pre lci cars i have also lost the function of my electric steering colum is there anyway to make it work without the memory seats being there?? thanks for any help you can give me thanks tony

[@moonwalk6404]

Amazing

[@negru9439]

Hi, could you please help me with just one retrovit question?:) I ve been having a hard time finding any help..

[@Jasko2609]

Hello, from te yellow connector which pinn number do you connect on which pinn number on the center console? Pin 2 yellow on pin 3 Center console? That's unclear. Thanks

[@doelbaughman1924]

This is incredibly helpful but it's incredibly disheartening. I know nothing of wiring, and I want to add a comfort seat and heated seats. Is there a video about knowing which wires to move around?

[@qruczy579]

great job!

[@maksimlukushin2625]

More e60 please!!

[@himmetulubnar3331]

How do we deactivate the cun bus and install the e34 e seats?

[@xile321]

As always very impressed with the level of your work but why didn't you upgrade to the 20 way comfort seats and got basic seats again?

[@ast1527]

Awsome job mate! Cheers😎

[@klawins89]

Hi! I have bmw e60 with comfort seats. I have one problem. My seat side bolster not going back to memorized position when I close the car’s door. It goes to zero position when I open the door or turn the car off and etc, but not going to memorised position when I close fhe door. Only gets back when I press the memory button on seat. Passanger seat works fine. 🤷‍♂️ Maybe you know how to fix?

[@koacozmi2446]

salut cu respect , pentru cele cu masaj si ventilatie este alta procedură? actual am electrice cu memorii

[@s.s95001]

hello i have a e60 2006 year not lci version with with semi eletric seats like these in your video and i buyed full comfort heated cooled seats and massage same year as mine not lci type i need help to wire please if you can.

[@kacperzalecki969]

Gr8 thx. DO you have maybe some information about connecting heated seats? small modules under the front seats e61 not LCI no cables folded seats

[@kacperzalecki969]

Seats from LCI

[@MOvidiu]

Hello , you can find everything you need in WDS and in istaD

[@istratebogdan8737]

Salut! Am tot cautat o rezolvare la problema mea(E60) dar nu gasesc nimic. Ceva imi spune ca tu esti persoana potrivita. Am trecut de la scaune full electric la ceva comfort. La pasager e totul ok,la sofer merge tot mai putin butonul de memeorie. Cand apas pe el sa memorez,nubse lumineaza si nici nu isi face treaba. O parere? Multumesc anticipat.

[@przemto]

Good Job OVI. where did the can wires come from at the module? since you dragged the power cables and the lin-bus from the armchair?

[@MOvidiu]

Watch the video from end to finish , and lessen carefully because I explain you everything !!

[@floringrs5467]

Salut dacă pe mașina am scaunele comfort cu încălzire și vreau să montez tot comfort dar cu încălzire/ventilație și masaj trebuie sa modific ceva la instalație?

[@nickemfive8866]

Does anyone have an idea how to retrofit the newer crash-active headrests? The 520d in the video already had them from the factory but what if you have an older model? I am going to put ventilated seats ("Nasca") in mine. I know how to do that, but have no idea how to make the headrests work since they are from a newer model (2008 vs 2007 LCI). They come with a separate yellow connector with 2 wires (from 09/2007 to 12/2007 the driver's side has 4 wires due to a secondary seat belt tensioner). So basically it would be a question of wiring and does it require the airbag module etc from the donor vehicle or can the original one be coded?

[@NeRkO24]

Hi. I have done the same. Put Pre LCI full electric seats into LCI instead of half electric. My problem is that I am moving both seats at same time from passenger side. But never from driver side. Also I have on CAN bus only SMBF...no SMFA. I also took for testing SMFA from an other Pre LCI because I thought I have wrong SM on driver side...but if I put it in LCI Ista shows me again SMBF (also if i unplug the SM under passenger seat) 😂 I've connected both SM on same CAN and from both SM 1 wire (LIN to SZM)...any idea what I did wrong?

[@MOvidiu]

Hello! you need to proper check your wiring and compare-it with WDS ! the passenger seat it is a slave and need to have an additional ground!

[@Rocker123uk]

How did you know which ecus to code?

[@eddy45686]

My seats are manual forward Msport type. The drivers won’t move forward. How can I sort it. Pressing button on front does not release to move forward but back is ok? Any ideas ??

[@MOvidiu]

Hello! no idea, you need to put your head under the seat and see if everything is ok and no foreign objects!

[@alexandraava3034]

Top man

[@MOvidiu]

You are awesome!

[@lazarsilviu6321]

Salut Ovidiu as vrea un sfat dacă e posibil .îți explic am un bmw e90 și am montat scaune sport full electric dar fără încălzire. Eu având acelea clasice cu mânere. Am reușit și leam alimentat dar funcționează pentru câteva secunde apoi modulul de sub scaun întra în protecție.probabil e din cauza la can bus .acele 2 fire unde trebuie sa le trag ? Trebuie programat modulul după sau e de ajuns doar sa trag firele?

[@daliborjurjevic5457]

I contacted my comfort seats coding but switch not working only with intp bmw dijagnostika

[@MOvidiu]

Hello! you did not connected them correctly ! please check WDS and what have you done on the car! in the video I have clearly explained how the seats are working !

[@daliborjurjevic5457]

@@MOvidiu thanks men

[@cristispanu5843]

Salut Ovidiu am vazut priceperea ta de a face schimbarea scaunelor vreau sa fac schimb interior de f 10 de M pachet in interor confort si vrea sa le faci tu astept raspunsul tau iti multumesc

[@enton7474]

Hi, Pls i need your help I have an E 70 and i have retrofitet comfort seat with ventilation. I need to code the modules

[@MOvidiu]

Hello, first you need to add the options in FA, and after that code affected modules

[@enton7474]

@@MOvidiu Thanks for your answer Pls can you tell me the order of procedure so i can try with ncs expert

[@enton7474]

@@MOvidiu hi again Thank you for your reply I managed to do it. Added kcan wires and fixed some wires for controll knobs and everything in working perfectly. I code ihka with bimmercod for ventilated seats and all good

[@enton7474]

@@MOvidiu but there is only one problem at driver seat. I get both from e71 and put on e70 and i have an error for ACSM: Backrest Lock (E93)/Seat Memory (E70/E71) For Driver's Seat And seatbelt reminder and airbag stay red on insrument cluster

[@enton7474]

@@MOvidiu 93C6 SLV / seat module driver This is the code with bimmerlink scaner

[@carguyvlogs9764]

Epic mine needs doing!!!

[@flaco6553]

does this work on prelci?

[@No-tg4ui]

Can someone send some diagrams for wiring? actually for connectors-

[@gregsisun9791]

Hi Ovi can repair for me flooded Toyota Land Cruiser???

[@tomaxsas]

wouldnt be better to add comfort seats, not sure if this is worth it

[@gabrielmisko7553]

Can you do tge same thing for bmw e39 nfl?

[@alexandrumurariu4298]

Salut ai idee daca am e 60 lci cu interior comfort se potrivesc scaunele comfort de la f10?

[@KUCIAKOWSKI]

Good job but comfort Seats is better 👌

[@MOvidiu]

The comfort seats are the best seats that BMW have ever made for this generations!!

[@peterandrew2035]

Salut , si timp sa mi codezi si sa tragi fire sau ce mai trebuie la un e60 ? Am avut scaune semielectrice iar acum am pus comfort

[@MG-ng8cv]

Salut. Care este butonu care le pliaza de la jumatate? Merci !

[@MOvidiu]

Cele din video nu au asa ceva , dar cele care au , butonul e pe butonul de reglaj spatar

[@fraizer2600]

you do always so very good job... i hope i have you in france to send you many bmw... Can you please tell me is is possible to replace E64 (convertible sits) by F12 convertible sits with heating memroy etc fully working ? is a guy who didi it but not totaly that mean the memory etc works except the heating sits. a friend who make electrics harness told me i theory and to have no issue you just need to switch all your modules under your sit E64 LCI 635D sport pack (full electric and memory) and put them on the F12 LCI. What do you think about that ? on the F12 LCI they are airbag on the sits but on M6 they are in the doors then i will just not plug the wires for the airbag on the sits. i realy wish you are close of me to bring you the car but unfortunatly ^^

[@vasililiev6761]

Hello! Can you please tell me if e65 seats can be retrofited in e60 ?

[@MOvidiu]

Hello! what do you think? did you see the e65 seats? did you notice some differences?

[@milanvujadinovic7623]

Why you must hold the button 1 or 2 for memory?

[@milanvujadinovic7623]

Must calibrate like a windows or not posible?

[@milanvujadinovic7623]

And how i can do welcome light on e60 not lci,does can do cros idrive?best regards

[@titan_bmw]

What about E90? The same?

[@iovanovicidarcoii320]

Salut. Ajuta ma si pe mine te rog. Am o problema la un e60 lci. A stat masina o perioada nemiscata, s a descarcat bateria. I am dat curent de la alta masina prin fata, a pornit, tot ok, dar nu mai merg butoanele de pe panoul usii soferului. Am luat alte butoane si la fel, nimic. Geamurile coboara normal din cheie si de pe fiecare usa. Ce sa se fi ars oare? Mersi anticipat!

[@MOvidiu]

Salut! ai diagnosticat masina? scanat si citit erori? facut test masurat si verificat erori ?

[@iovanovicidarcoii320]

@@MOvidiu salut. Azi fac asta. Te voi mai deranja o data sa ti spun ce si cum, daca se poate. Sper sa o rezolv. Mersi frumos!

[@Ionut535d]

Salut, ce înseamnă active seats pe e60?

[@yomadalin92]

salut! cat costa manopera la un retrofit de la scaune simple la scaune simple cu incalzire la un bmw e60 lci? Multumesc anticipat de raspuns!

[@MOvidiu]

Salut . pai va trebui sa gasesti pe cineva care face retrofituri pe BMW din zona ta , si ei iti vor comunica si pretul ...

[@cosminivan7359]

La orice optiuni in plus care masina nu o are trebuie codat?

[@MOvidiu]

Depinde de "optiune" unele echipamente pot functiona si fara codare , dar ca sa fie perfect integrate vor trebui codate!

[@roki-savarina4473]

Pentru a pune încălzire în scaune pe e60 , se poate ?

[@MOvidiu]

Salut, da daca ai elementele de incalzire si senzorul de temperatura , e putina munca sa le montezi dar nu imposibil . Probabil daca faci o cautare pe Google.com vei gasi mai multe detalii!

[@roki-savarina4473]

@@MOvidiu mulțumesc de răspuns

[@iovanovicidarcoii320]

Salut. Ajuta ma te rog cu o informatie. Am cumparat doua scaune sport la masina, avand reglajele la fel ca si ale mele si incalzire. Problema e ca sunt de anglia. Am vreo sansa sa le pun si sa nu imi mai apara eroare de airbag? Asta pentru ca mufa cea mica de culoare galbena la mine e pe stanga la sofer, iar la scaunele de uk e pe partea cealalta. Ca ar trebui sa fac? Mersi frumos.

[@MOvidiu]

Salut! va trebui sa le demontezi si sa muti sezutul de pe un scaun pe altul sau daca vrei doar senzorul de prezenta dar e mai mult de munca .

[@iovanovicidarcoii320]

@@MOvidiu m ai putea ajuta cu montajul scaunelor la primavara cumva? Platesc tot deranjul. Imi pare rau sa le vand... Se pot face functionale? Si la centuri difera unele chestii. Masina e un e60 din 2007, facelift, dar pe modelul vechi cum ar fi...motorul e cel m47. Mersi!

[@MOvidiu]

@iovanovici darco ii Pentru reparatii diagnosticari si retrofituri va trebui sa apelezi la un service specializat BMW din zona ta! Eu nu te pot ajuta, nu ofer servicii de nici un fel.

[@iovanovicidarcoii320]

@@MOvidiu mersi de sfaturi. Mai am o singura intrebare. Daca prelungesc firele de la mufa cea mica galbena din partea stanga a masinii cum e acum, pana in partea dreapta la scaunul soferului de pe masina donatoare de uk, e ok? Alta idee nu mi vine.

[@robinetyt3423]

Salut,de unde ești?Ași fi interesat dacă poți să mă ajuți cu montajul.

[@MOvidiu]

Salut! Din pacate eu nu te pot ajuta ( am specificat si in descrierea clipurilor video) dar sunt sigur ca daca cauti vei gasi pe cineva in zona ta care te va ajuta!

[@alexrafael5661]

Salut cum pot sa iau contact cu Dvs ?

[@kts2872]

Hey Witch hp tablet do you have?

[@MOvidiu]

HP elite X2 G4

[@kts2872]

@@MOvidiu thx

[@emerald2k.]

Ovidiu, unde putem găsi atelierul tău?

[@MOvidiu]

Salut , nu il poti gasi deoare-ce nu am atelier :D . daca ai nevoie de lucrari/reparatii la masina ta va trebui sa apelezi la un specialist BMW din zona ta !

[@emerald2k.]

@@MOvidiu sunt deținător si pasionat de e60 si caut pe cineva atent si priceput cu modelul ăsta. Îmi place cum muncești si ce faci, respect!

[@istvanorsos7927]

❤️❤️❤️❤️❤️❤️❤️🔥🔥🔥🔥🔥

[@opesenator]

imi faci si mie un retrofit pt ridicare automata portbagaj la un e61? :D imi asum riscurile

[@alexrafael5661]

Lasă-mi te rog un contact sa pot vorbi cu tn ofer cât doriți 🙏

[@leduck4250]

Bonne video dommage pas de zoom surtout si on ne comprend pas l'anglais

[@dominiquevisse3789]

Dommage que ce n'est pas en français

[@megalow-windscreens]

Ai un numar de telefon? As vrea sa te intreb ceva dacă se poate

[@radularie7537]

Nu taiati curbele! Asta-i maxim! 😂😂😂

[@bayerischemotorenwerke6606]

A very poor guide to converting a chair to full electrics. No display of additional seat travel motor. There is no information about the additional module. and bundles. There is no information about the front skin stretching and the addition of a masking strip. It is better to buy original seats because they have an electric headrest. In general, you do a lot of rework and don't show the electrical mechanisms. My assessment 5/10 There are other shortcomings of yours that I will not write about. Plus for willingness to work with armchairs.

[@MOvidiu]

Hello ! Unfortunately, this is not a GUIDE or a DIY . And if you think that you are able to do something better than this, please do it and I will promote it.