Keep Running Strong! Maintenance & Replacement Parts | Motorized Bike

[@Paul_Gale]

I use 50mm M10 bolts to hold my sprocket on with M10 nylock-nuts to bullet proof the sprocket connection. They kept coming loose on me, but not any longer.

[@tonytaylor5087]

Nice solution! Thanks for sharing 👍

[@gibblisparks9573]

Finally a new video!

[@cyeneic]

Great video Tony. May I ask why you do not like using the Dorman Toyota O2 Sensor gasket as the exhaust gasket? It doesn't melt or blow out like the ones that come with the kits. Anyways looks great happy riding.

[@tonytaylor5087]

Oh yeah, those do work great.

[@jimjensen1096]

Great video, thank you. What model reed is that?

[@tonytaylor5087]

Thank you. It’s the 40mm reed intake. I’ll post the link in the description.

[@jimjensen1096]

​@tonytaylor5087 No thank YOU! I have the same carb as you have on that particular engine, so you answered a number of questions for me with this video. BikeBerry is building back their reputation in no small part because of you. Hopefully you can keep making these highly informative and useful videos!

[@tonytaylor5087]

@@jimjensen1096 awesome! So glad it helped 😃

[@nicholass5652]

Is it possible to convert these to a kick start?

[@whnzr7047]

There’s already a kickstart on it. You have to lift the back wheel up with the clutch dis-engaged and kick your pedal down to start it. Make sure to engage the clutch because you don’t want to have it run off on you. Good luck 👍

[@mattparker9726]

Yeah, I'd be happy if BikeBerry stocked a #35 chain gear that would fit on the 2024 Phatmoto jackshaft, hardened tool steel, the deepest groves and thickest teeth possible, and still interface with the chain properly. It's a REALLY bad design, it will constantly work itself loose via torque and the slotted engine mounts, causing the chain to be loosed and eat up the gear. If you guys could look into supplying replacements parts cheaper than 80 dollars you'd undercut Phatmoto.

[@Rambling_Rover]

True the phatmoto jackshaft sucks. But, I would depend on a company like bike berry to do better. Bearing number 99502H will get you to a 5/8 jackshaft. Source parts from there

[@mattparker9726]

@@Rambling_Rover what?? Also is there a better centrifugal clutch?

[@Tune.Up.Techie.]

cool whats the top speed on that thng

[@veteransowhat5669]

Do you know who wrote these directions?

[@bartztube1921]

What revolve do you have on that?

[@acorncz4752]

Does that reed valve fit on a YD100 ?

[@bartztube1921]

Like what's the name of it

[@firefighter8021]

My kit keeps Snapping drive chain can't complete a ride (MODED) anyone recommend a chain that don't snap?

[@Paul_Gale]

I use : RK Racing Chain M420-114 (420 Series) 114-Links Standard Non O-Ring Chain with Connecting Link from Scamazon, was less than $15 .made in Japan. running sense march with no issues. You can use BikeBerrys link and purchase this product and still support his channel. Hope this helps

[@tonytaylor5087]

How tight is the chain?

[@firefighter8021]

@tonytaylor5087 tried just about everything I can tight loose tensioner no tensioner the works even angle and drag accounted for

[@firefighter8021]

@@tonytaylor5087 longest last was 9 miles roughly without tensioner and propper slack

[@tonytaylor5087]

Try the heavy duty chain. The link is in the description.

[@carloscardova4221]

Tony, Tony, Tony ,,,,,,,, ' ?')// .....//) \ You had (O))// \\ the right Exhaust, just perfect the way the pipe loop around the down frame like that tony, Do you how hot it is ' ?')..over here this month in TUCSON AZ .If had use that exhaustat at 112 🔥 Degrees Fehrenhiet . Everything got to be look over . your going to need to change something out after one year of use. Did you know i change out my piston ring after one year. Use my motorbike this morning it was 85 degrees the six mile motorbike run was flawless, we don't use that type of exhaust flip upside down, you'll cook and burn your leg, why don't they want to fix that exhaust why not loop it downward like a belly pipe ' ?').. Tony.