Carburetor And Clutch | Adjusting Your New Motorized Bike's Carburetor & Clutch | Bike Berry

Tony shares what he learned from our great Facebook community group about setting up our NT carburetor and clutch on your motorized bicycle properly the first time. Following these steps will help you understand how to adjust your throttle cable and idle adjustment screw to work together while giving you plenty of adjustments. Then he shows you how to properly connect your clutch lever to your engine's clutch arm. Let's Roll!
Please check out our improved throttle grip here:
www.bikeberry....
***Every single part mentioned can be purchased here 👇👇👇👇👇***
BikeBerry.com ►bit.ly/1FZ8nPp
Facebook ► on. 1wWG4fD
Instagram ► bit.ly/1aM3WxZ
Twitter ► / bikeberrycom
***Everything you need to make your own Motorized Bicycle.***
Chapters
0:00 - Introduction
#motorizedbicycle #bikeberry #motorizedbike #100cc #80cc #66cc

[@ThomasAshe-z8k]

My goodness , I was at work and a friend said he knew how to install carb lol I’m gonna take the information from your video and do it right This is how I get to work everyday I have a prosthetic foot , my freedom to get around Thank you

[@MarkHarris.1981]

Did it work for you i just got me one and im having trouble

[@davideckstrom8182]

I have a prosthetic leg right leg below knee. I was biking 30+ miles a day until I got my 50 cc

[@mcchillindaily4581]

I can't believe how much I enjoy watching these videos.

[@normanmoore1659]

Gotta say that you were probably the guy who helped me more then the 100 other videos I watched YOU THE MAN ,👍

[@michaelmccuin5390]

Thank you for walking through it slowly but not to slow. Your the first one that I could understand to say again I appreciate your smooth way of talking. Have a great life. Keep it cool

[@audieallen9734]

I play this on .75x speed and forgot. left and came back, hit play I thought, wow! this guy is baked! lol jk definitely thumbs up from me

[@robertwhitt3762]

#Build it right. Dude.

[@svensplooge9961]

U was the 1 that was high hahahaha

[@Codbeast101]

@@svensplooge9961 You might be with this grammar😂

[@davekahle8491]

lol, had to try it....hafuckinlarious, lol. thanks, I needed that.

[@joeypriolo]

Put it at half speed and he sounds drunk 😂

[@benjaminjclark6895]

I recently came into possession of one of these and I have to say I'm very thankful to have you as a teacher and someone to show me some loops and give great feedback on the issues that I'm having on a hand-by-down fixer upper. #builditright

[@williamdickson2283]

I would like to start out by saying thank you for all the helpful information. My brother gave me a 66cc beach bike. It h ad a lot of issues broken motor mount bolts 3 to be exact slipping clutch and a carburetor full of debree. And thanks to your videos I was able to bring it back to life. So thank you so much please keep making videos priceless.

[@jakeford3359]

Im still 15 years old been riding em since i was 13 years old and i love motorcycles alot but im still young to ride one so im into this hobby and i really enjoy it. Thanks Tony. #BUILDITRIGHT

[@JoseDiaz-kv5cz]

I'm 62 years old!, and used to ride a motorcycle, and bought one of these, to ride around town!, its little slower,lol but that's ok it's a great hobbie!, and when your ready for a motorcycle, ALWAYS!!! remember to wear helmet, Jean's, gloves, same as a motorcycle I just bought Phantom 85 v2 just breaking it in! RIDE ON!!!!

[@Aaron-f8o]

Kip it up the more knowledge later will help you out bro and it's fun take care

[@dayneponsart5097]

Hey great video.New installation my bike won't start but after watching the video I realize my throttle cable is to loose The video shows how to pick a different hole to pre snug cable having g your adjustment screws all the way in so you have maximum adjustment abilities

[@taylorrader6918]

This whole series has helped me with the little problem I had with my first motor and I actually had to take it off because I missed something up but if I would have watch the videos first I wouldn't have missed it up. You guys are doing an amazing job and you always #builditright

[@lookingtoleave-wi9rh]

You ABSOLUTELY hit the nail on the head about the magneto leads being backwards!!! Brand new motor, just WOULD NOT start and I went through everything trying to diagnose it, turns out it was the leads being reversed! I have also noticed these motors are NOTORIOUS for the threads on the end of the crankshaft stripping at the drop of a hat to where the won't tighten back up,! I have TWO of these motors this has happened to, is there any OTHER ways to fix it besides rethreading it to the next size down or replacing the whole assembly?!? Thanks in advance! Be blessed.

[@haroldturner8114]

Clear easy to follow instructions, with just the right amount of warnings on what not to do. I have a motor with a starter and it's a little different in the clutch area but carb is same. My problem is mostly now in the sprocket, problem keeping it centered and running true. Thank you for the tutorial. Much appreciated. BTW, I'm 86 yrs old and looking forward to using this bike this summer.

[@dwayneboyer8828]

I bought a 2 stroke engine and installed it on my 18 speed mountain bike. But I really got some valuable information from this video that I can use ASAP!

[@tonytaylor5087]

Excellent! Let us know how your mountain bike project is going!

[@TheVonhollan]

#BUILDITRIGHT This whole series has been A great refresher. I had built my first mini bike when I was about 13, 2 different engines to make one that would get running. Then I got into landscape work always fixing weed eaters and other 2 strokes. I did buy a cheep kit online it only took me 4 hours to compleat my Schwinn 29inc. Beach Cruiser into a now motorized assist bike. It was this video that helped me to set that pesky idle screw to almost perfect from there I let it warm up and fine tuned it. Thank you for all the help!

[@waynegallant9056]

thank you for this new to the hobby they are so much fun to ride its like your a kid again thanks bike berry

[@Francisco08Avila]

I’m building my own and this video gave me great tips on how to install my clutch cable Thanks

[@JoshHardy303]

Omgosh look !! I'm about to get my cruzer in the mail now I'm so excited 😆 I can't wait ..and I'm going to watch all of your videos to make sure I get everything right! ..and I want to record most of my Journey with my new Freedom! .. thank you for all of your material .. especially the carborator , and Head Variations I enjoyed those a lot

[@stevenjackson507]

Thanks for all that you do,by taking the time and showing step by step, I see that you love what you do

[@walleyeye]

OMG I’m so happy I found ur channel!!! I have a friend who is just getting his out together and he is having nothing but problems. He knows little about these kits so I’m helping as best I can.

[@ThePetalesharo]

#BUILDITRIGHT I just want to let you know that this whole series is awesome! It's really helping me plan what I need to do to make the engine kit I have coming fit well on my cruiser, as well as all the things I might need to buy. Has answered so many questions in a small timeframe. Thank you Tony!

[@charlidaly9054]

#doitright

[@P100D.]

Dammmm lots of small details, thank you for sharing 😊 love you guys !!!

[@tonytaylor5087]

Glad this helped you P100D!!

[@rickymiller7624]

I love these motor bikes, I'm just having problems with my carb. This video really guided me to fixing my problem. Thank you ..keep up the gud work

[@SyberSqueegy]

Thank you for enlightening me on the fact that the stock carb needle clip has multiple positions on it! Now (once break-in progresses a bit more) I know how to lean her out easily.

[@sheldonhill8427]

This video was very helpful....I wish Tony was around when I was trying to be apart of the community and jacking up 3 motors....thanks man! Hopefully I can make my back....

[@sheldonhill8427]

#BUILDITRIGHT

[@georgedean5734]

Build it right !!! Thanks for the info ! I live in N.H. , way to much snow here for winter riding. Thanks for the motivation to get the "Ditch Digger " super tuned !

[@tonytaylor5087]

Yes! Winter time is perfect for getting your ride ship shape!!

[@MrJoeju420]

Dope. I was wondering why my engine wants to keep dying while it's going! I wasn't even looking for something about that right now. Just looking for a basic tune up video but nope here is the KZbin gods solving my problem!

[@commentcrafter4158]

Just got a kit from you and i cant wait to put it together and then start buying more parts to upgrade it!

[@doyleray4374]

Finally a dyi that was thought out before filming started and good informational content.

[@markgibson840]

I like the explanation of setting the carburetor, now I can adjust my five bikes. I have to get fabric from craft store not to loose clip while breaking down carburetors too. Good teaching video I like this awesome!

[@tonytaylor5087]

Mark! So glad it helped you my friend!

[@SethHall-o4y]

My new kit came today and ur vid was the best ..like bro said...thumbs up

[@tattoojacktat-citysupply469]

I'm really liking the presentation. taking it easy nobody stressing me just me my build and some tuning time what kind of reminds me of good quality tattoo time thanks again bike berry technicians in fact thank everybody thank you all for keeping this bike tradition going in the northwest I always have loved riding bike with or without motor but I'll tell you what nothing is equal to something bikeberry built!#BUILDITRIGHT

[@mrfuzzy4770]

Great video, very easy to understand. Thanks for the help.

[@raymondshrader3555]

That video was really good brother and the reason I know is because I was able to follow along on that one, lol.... Tks again

[@michaelevans5054]

Thanks for the walk through. It helped alot. From Washington state. 🙂

[@bryanfrasure1534]

Hey I really can't thank you enough for your help. Thank you so much

[@garybeard4421]

Learned alot..glad you took the time to make this manual thank you im putting my kit together please me luck I've got a lot of people interested and watching me I mention bike berry hope I can help😊

[@stevestevens919]

I liked your video very much showed a lot of things on how to do. I want to try get one for my disabled phone. Show your video was very helpful to me thank you so much.

[@donttread5414]

2:24 You dont explain what you are doing. You are change where this is set on the pin. What are you doing? Why?

[@theanomalous1401]

Thanks Tony, for the entire build series. My grandson will really find this useful! #BuildItRight. 🚲💨🇺🇲

[@tonytaylor5087]

You’re so very welcome! Share your project in the Facebook group when you’re working on it. Love to see it!

[@melvinrandall2181]

I've built several yet I'm still learning tricks thanks BlackBerry

[@jaimezhang9269]

Thank you very much for teaching how to adjust the carburetor and the cluch

[@timlaplante6711]

Excellent tips and you do know what you are talking about. It is great to have resources like this. I wish I would have stumbled across this sooner. Thanks again. #BUILDITRIGHT .

[@genehendrickson9358]

Very Well Done Sir, takes the guess work out of many of the problems first time installers may and will encounter.

[@americafree6855]

Thank you for describing how to adjust the carb so easily understandable!

[@Michael-t1j7q]

I just seen the show and it was great nice detail on the the show 100% helpful. Very good job I look forward to seeing more THANK YOU

[@edwinmyers4083]

It helped me with the initial setup good video

[@Anthony_T3ch]

#BUILD-IT-RIGHT!!!!!!!!!! GREAT JOB SO FAR

[@briansirmons4852]

Really appreciate all the info you give and for you taking the time to make all the videos. Very informative with awesome information.

[@alwhitesell4023]

Thanks. The best bench mats I have found are Pig mats, the white ones made for absorbing oil.

[@williambrucesanders6878]

Thanks man u saved my life i appreciate the time and effort u put in the video

[@robahbeck4420]

Every tip you gave was helpful

[@ceethanasouk3146]

Good video. I know about 🚗 but didn't know tips n tricks that I saw u do about bikes... Thanks

[@GamingMaster-us7ty]

The Best It's simply the Best. Bikeberry

[@nephilimxijingping]

#BUILDITRIGHT Thank you for the information. I'm building a 100cc with a cruiser bike frame I bought. You really helped me out. Had no idea how to install Throttle and Clutch cables on bike since I'm new to this. Your the Man!

[@bryduhbikeguy]

Sweet ! #BUILDITRIGHT.Thank you for your continuing series on building a kit right the first time.Good gosh.I just realized I started with you guys 4 Years ago.Still riding that bike.I've added things as I could,and really enjoy just cruising sometimes.I have 2 more kits,and 2 on the way,all 66/80cc each,plus built my brother's engine last summer.Have fun,and be safe!

[@tonytaylor5087]

That’s amazing! And you’re absolutely welcome. The series is/has-been so fun to dive into. Take care my man!

[@gailjohnston7671]

Learned I have been making mistakes, Very helpful

[@Emberinthewyld]

Be patient with your first build and #builditright Love this series so informative 👏

[@jimbaudendistel]

I was struggling with both the clutch and the carburetor and didn't even realize it until I watched this video. Thank you so much! Now I will cross my fingers and hope that I can finally get this bad boy running. #BUILDITRIGHT

[@danbrownellfuzzy3010]

The strap to the ceiling was a nice tip for working on the bike. The J hook to a rafter was easy.

[@jamesgnarkill3112]

Hey Tony.. nice deal man....killer way to kick off the new year... ride on...#builditright

[@tonytaylor5087]

Appreciate it James! Let’s do this brother 💪

[@DavisNiemi]

This video made it cleared on how to install.the carb. And improve the. function of the clutch

[@samsalazar4002]

#BUILDITRIGHT I just got my 1st bike and it has a lot of issues by thanks to you all it's slowly working out. You all are awesome!

[@richardhooper356]

Thank you for such a great video! The presenter should get an agent. His voice, demnor, and cadence made the technical video fun and exciting to watch. Thanks for sharing all the knowledge! #BUILDITRIGHT

[@mitchelldenny2569]

#BUILDITRIGHT 👍 it is awesome that you're making videos and showing everything about the motors that come with purchase of the kit ordered. I also like the way you brake down and explain each section it's functions , and also videos that show step by step on how to enhance power performance,and modify the engine for more power.

[@FurstLaust]

First #builditright Then #gimmethebike Geat information and well delivered. Thanks!

[@tracyconnatser533]

great video very helpful just one question what size drill bits where used for the carb cover holes?

[@literallyvishal]

Just ordered a new kit, can't wait for it to get here. Trying to learn as much as I can and prepare myself for when it does. #builditright

[@Fred_the_1996]

How did it turn out??? I'm waiting for mine to arrive

[@FAHAD-sc4qx]

وانا أيضا

[@wowzers64333]

hey tony, you should make your videos link to the website, especially for first timr builders. youre the only one on the crew that actually goes into detail on everything. i just got the 66/80cc kit and used the linked videos to build it. after watching your videos i feel like i skipped a lot of important steps because the person just sped through it

[@nikkopanella2557]

This bike is literal perfection! #BUILDITRIGHT

[@jeffyoung3528]

Great video tony, should help alot people out

[@bougieethugg]

Do you have any videos pertaining to the hydraulic clutch?

[@richardskidmore6632]

Hi from the UK. Many thanks for these helpful, clear tutorials. I’ve just got one of these 80 (66?) cc bikes road legal in the UK. This might be a first. Anybody out there let me know if it’s not. Keep up the good work.

[@pkz7024]

How you get it legal

[@wonkydonkey4371]

It's illegal in the United States because it has to had a Vin number and be registered to drive on the roadway but I can go on Amazon and order a E-bike that goes the same speed and I would never get stopped

[@alanssnack1192]

@@pkz7024 he self authorized himself

[@JoseDiaz-kv5cz]

Enjoy my friend!

[@JoseDiaz-kv5cz]

Not illegal in ohio! Or Texas

[@WayneSchellenberg]

Love your video's, You taught me SOOOO Much, Thank You,# Build it RIGHT....

[@TheVolumeSociety]

Well done. Good to watch. Happy New Year. 👍. #BUILDITRIGHT

[@Sammy-kq7kz]

Your videos and website is just so helpful my friend. I'm really trying to get my motor started and having so many problems. Your helping but I'm not quite there yet

[@wickedstrange7006]

#builditright I'm a first time bike builder and I can say I've ran into my fair share of problems. More then I wish I had. But this video has been by far the most helpful one ive seen thank you so much.

[@jontorgerberg1929]

I’ll have to go back through my clutch and carburetor adjustments after watching this

[@mariocoronado7108]

I never want anything in my life but great videos great everything bikeberry you're the greatest and I love building motorized bikes myself #buliditrate

[@alexanders.nurell1134]

I AM GRANDPA HELPING MY GRANDSON STARTING HIS CRUZER...FINALLY CAN SEE HOW IS DP IT. THANKS.

[@Kyle-s_corner]

I’ve been finding conflicting info do you start with idle screw all the way in and back off 4 turns or start with it out and turn in 10 times???

[@mattludwig1078]

#builditright. Could really use this to get around town. Love the upgrades

[@jamescrawford3325]

Very informative and easy to follow. I will be watching for more important mechanical institutions. Thank you!

[@needamotor]

#builditright I have a bike someone else built. It never ran right, so we have been learning how to get it going. This video helped me greatly with the carburetor piece. It was a good starting point which at least allowed the bike to idle so we could tweak it. It will never be a great bike, but at least I got it working. Yeehaw and thank you

[@Westhelockpicker]

do you leave the main jet inside the bowl alone? I've seen some people change it a little and some not

[@davidolsson5502]

Very, very well presented!

[@kleptoklepto2560]

do you think this same method is good 4 the sports carb! ive seen your clip where you done the difference test between this stock carb & the sports one but you didnt do the idle screw 4 the sports carb... cheers

[@AutumnTg]

Big question I have this small carb and another one (red) what is the size mm of the E clip for the float needle? Thanks

[@meco72104]

So 10, 1/2 turms on the idle adjustment screw? Do you use locktite on the bolts?

[@mattDIY]

Good idea 😃 good job

[@kimdecastro9156]

great video first time builder .still setting every thing up. on my bike . # build it right

[@dylanmcphee8454]

Have you done a second video that shows how that high performance carb works? I have one and I would like to install it and know how to use it correctly. Thank you!

[@reyes7411beans]

Is there away that you’re able to press the brakes at one time, both the front and rear at once?

[@HanzelFonferek]

Thanks for this video!

[@JorgeRodriguez-ei2gi]

Outstanding videos well explained Mr Tony ,thanks,continúe with motorized bikes ,Say hello Joe & Bros.

[@tonytaylor5087]

Thank you Jorge!!

[@mattyr.4328]

High performance carburator is a better from normal one?Give more horse power?

[@edtorres5490]

Ed here... Wow ! What a calm & clear.. View & explanation.. I've viewed your video's before... Excellent stuff.. Question for u... My carburetor is sitting at almost like you have yours... And yours seemed at 45 degrees higher than mine.. I understand yours is a show and tell.. Mine is new... Break in two 4 liters of gas.. Still running good.. But sounds bad.... Before i give it.. To my grandson so we can ride together... Suggestions tony... Can it run better with a level carburetor...

[@tonytaylor5087]

Great question Ed. As level as you can get it is most definitely the way to go. Of course many factors are involved like engine mounts etc. This bike is hanging from the ceiling hoist at the moment so it’s definitely out of level compared to how it’ll sit on on the ground fully assembled. Now, as for sounding bad. My black bike sounded bad for a few tanks a gas. Since yours is new I’d dial it in as best you can then ride it a lot to truly break it in. It should sound better and better.

[@peggybrashear4481]

Love the video!

[@alynnjacob1857]

#Build it right. Liked, shared and subscribed. My bike ran great after build, but then the chain broke while riding and caused me to wipe out. Since then, I have wired, rewired, changed out cdi 3 times,and I can't get it started. It's making me crazy,!!!! I will join your forums to see what everyones advice is, along with yours. Thank you for such an informative video!✌️

[@jonmerry2190]

Build it right. Thanks for the video made it easy. 4/18. 10:13 pm

[@jeremiahjackson4995]

Appreciate it video Tony ..found it very useful and easily broken down ,to where any one can build a bike ...Ive actually bought many motors from bike berry and absolutely love their motors ..#builditright ...

[@bryceevans8340]

Holy shit couldn't get mine to start for weeks popped holes in the cover and adjusted that idle screw and boom started right up thanks so much